SCOM ACS Reporting - Not Working

I am encountering following error while running audit reports in SCOM console-
Cannot create connection to data source 'datasource1',(rsErrorOpeningConnection).
Can anyone help me out on this?

Hi,
I would like to verify what exact error message is recevied when trying to open web console. which authentication was used when installing web console?
To troubleshooting this kind of issue, please refer to the following article:
Common Issues with the OpsMgr Web Console:
http://blogs.technet.com/b/kevinholman/archive/2010/04/07/common-issues-with-the-opsmgr-web-console.aspx
Here are more information:
http://blogs.technet.com/b/kevinholman/archive/2008/09/24/installing-the-web-console-on-a-2008-management-server-using-windows-authentication.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Thanks for the reply Vivian, I have actually seen this blog and none of the errors described here are the same as I am getting. I can try to describe the situation a bit better:
When http://Localhost:51908/default.aspx is used the web console comes up. No login is required. Everything seems to be OK.
When http://hostname:51908/default.aspx is used:I get the error: Internet Explorer cannot display the web page.
When http://hostname.domainname.local:51908/default.aspx is used: I get the error: Internet Explorer cannot display the web page.
During the initial install and following installs Windows authentication was used as the Web console was been installed on the RMS. I have now installed the IIS mgmt pack which is showing IIS as healthy both on the RMS and on the MS. I have also tried to add
the webconsole on the MS and used form based authentication. But it is also showing the same exact behaviour with the web console as that of RMS. (Had also enabled for delegation as Pete has mentioned)
I have checked the SPN and seems like they also are registered correclty. Any suggestions?
Thanks,
Best regards,
Sean
Rao

Similar Messages

  • Availability reports not working in SCOM 2012

    Hi,
    All of a sudden the availability in our SCOM 2012 is not working. I mean it just shows the plain white bar indicating UP(unmonitored) instead of the Green (available) or Red bar.
    I tried to check the MS logs but could not find anything related to this issue. Please note that other performance reports are working fine. It's just the availability reports that's playing with me.
    Any suggestions please?
    Thanks
    Srini

    Hi Gautam,
    This issue is resolved by restarting the SCOM services on all the MS. For some reason the MS were not able to insert the data in to the DW, once i restarted the services everything is back to normal.
    Thanks.

  • Drill down report not working in 1og report

    hi all,
    Drill down report not working in 1og.
    in 6i it working good but 10g not working .
    plz help any one.
    thanks

    Hello,
    For detailled instructions about hyperlinks :
    Oracle® Reports Building Reports
    10g Release 2 (10.1.2)
    B13895-01
    3.6.10.1.8 Creating a hyperlink using the Property Inspector
    http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#i1062802
    Regards

  • CDR report not working

    Hi,
    We have LYNC 2013 and Monitoring is enabled. the CDR report is not working. even User Activity summary for telconferencing and for audio, reports not working.
    Kindly suggest troubleshooting steps.
    Can we have any SQL query to fetch the report from database?
    Thanks
    jitender

    Hi Raju,
    From Monitoring server , CDR report is not working. Even "User Activity Report" not working and giving below error for "Telephony Conference" and as well for "A/V Conference"
    " No results match the report filters. Change the filter values and submit the query again."
    Thanks
    jitender

  • IPS event monitor and reports not working

    Dear after upgrading my IPS from E3 to E4  the event monitor  and reports not working, can you please advice my to solve this issues

    Hi All,
    Filter settings below:
    The filter works partially as I don't get alerts on the IPS itself.
    Firewall LOG:
    4          Feb 14 2014          15:33:22                              39715                    514          IPS requested to drop UDP packet from SOURCE_VLAN_NUMBER:/39715 to DESTINATION_VLAN_NUMBER:/514
    IPS LOG (when enabled):
    evIdsAlert: eventId=1352793300955167909  vendor=Cisco  severity=low 
      originator:  
        hostId: SSM02 
        appName: sensorApp 
        appInstanceId: 1192 
      time: Feb 14, 2014 15:33:22 UTC  offset=0  timeZone=GMT00:00 
      signature:   description=IP Fragment Too Small  id=1206  version=S212  type=anomaly  created=20030801 
        subsigId: 0 
        sigDetails: Too many small IP fragments in datagram 
      interfaceGroup: vs0 
      vlan: 0 
      participants:  
        attacker:  
          addr: 172.x.x.x  locality=OUT 
          port: 39715 
        target:  
          addr: x.x.x.x  locality=OUT 
          port: 514 
          os:   idSource=unknown  type=unknown  relevance=relevant 
      alertDetails: InterfaceAttributes:  context="single_vf" physical="Unknown" backplane="GigabitEthernet0/1" ; 
      riskRatingValue: 50  targetValueRating=medium  attackRelevanceRating=relevant 
      threatRatingValue: 50 
      interface: GigabitEthernet0/1  context=single_vf  physical=Unknown  backplane=GigabitEthernet0/1 
      protocol: udp 
    Our next step is to make a service policy exception on the firewall itself. We are also considering reloading the IPS device or at least the analysis engine.
    Thanks for all your help so far. Any more suggestions are most welcome. I'll keep you up to date.
    Regards
    Mariusz

  • After i install Visual-Studio 2013 crystal-report not working

    hi
    after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
    when i try to open crystal-report i see this:

    Hi E_gold,
    Crystal Reports forum may be a better place for you.
    Thanks for your understanding.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Interactive Reports not working with APEX listener

    Hi,
    I have posted this question APEX listener forum couple of weeks ago but very few responses.
    If any one from here can help then it would be great.
    Interactive Reports not working with APEX listener
    Best Regards,
    Baig

    Sorry for late response.
    It was a firewall issue

  • SCOM reports not working, with execute permission denied error.

    Operations manager 2012 R2,
    some reports stopped working. Then i open report and click "add object" or "add group" i get error:
    Note:  The following information was gathered when the operation was attempted.  The
    information may appear cryptic but provides context for the error.  The application will continue to run.
    The EXECUTE permission was denied on the object 'ManagedEntityTypeGetBySystemName', database
    'OperationsManagerDW', schema 'dbo'.
    In SQL  there is EXECUTE permission on object 'ManagedEntityTypeGetBySystemName'
    Reports which not required to specify object or groups are working as expected.
    what esle can be wrong ?

    Hi,
    Please refer to the blog below. It tell us how to grant permission to objects.
    http://www.ndoubleor.com/the-execute-permission-was-denied-on-the-object-database-schema-dbo/11/2009/
    Important Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Juke Chou
    TechNet Community Support

  • SCCM reporting not working

    Dear Support,
    I'm facing issue regarding reporting on SCCM 2012 sp1. Initially we have installed SCCM and SCOM on same server so i have uninstalled the SCOM from the server but after that reporting URL was not working at all.
    I'm getting below URL when I browse the URL i.e.
    http://sccm/reportserver
    The report server has encountered a configuration error. (rsServerConfigurationError)
    Get Online Help
    Hakim.B Sr.System Administrator

    if you don't have any custom reports, then I suggest you remove the reporting services role in ConfigMgr and reinstall it. It will take you 10 minutes to do.
    Kent Agerlund | My blogs: blog.coretech.dk and
    SCUG.DK | Twitter: @Agerlund | Linkedin:
    Kent Agerlund | Author:
    Mastering System Center 2012 R2 The Fundamentals

  • Discoverer report not working on R12 !

    We have just migrated to R12 from 11i and some of the discoverer query is not working, but the same is working fine when we ran thru SQL Developer or TOAD.
    Is there any context (mo_global.set_policy_context) needs to be set in Discoverer report to get the data?
    Thanks

    Thanks Srini,
    There is no any specific error message, the strange thing is if I run the Discoverer report is not returning any data, but if I set the mo_global.set_policy_context ('S',111) in SQL Developer or TOAD and then run the discoverer report it return data...
    Any pointers?

  • Crystal Report not works in JAR File

    I'm using Eclipse All in one, which includes Crystal Reports.. I Connected my Java program with Crystal Reports and its working properly. Now my problem is that the Report is not working in JAR files.. It throws some exception as
    "com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: com.businessobjects
    com.businessobjects.reports.sdk.JRCCommunicationAdapter---- Error code:-2147215357 Error code name:internal"
    Whats the Error.. I don't know. I think that i may missed some CLASSPATH Files. The included CLASSPATH Files are:
    ReportViewer.jar
    jrcerom.jar
    Concurrent.jar
    CrystalCharting.jar
    CrystalCommon.jar
    CrystalContentModels.jar
    CrystalExporters.jar
    CrystalExportingBase.jar
    CrystalFormulas.jar
    CrystalQueryEngine.jar
    CrystalReportEngine.jar
    CrystalReportingCommon.jar
    icu4j.jar
    keycodeDecoder.jar
    log4j.jar
    MetafileRenderer.jar
    rasapp.jar
    rascore.jar
    rpoifs.jar
    Serialization.jar
    URIUtil.jar
    xercesImpl.jar
    xml-apis.jar
    and the mysql-connector jar file
    Anybody help me please...

    Unable to load database connector
    'com.crystaldecisions.reports.queryengine..driverImpl.
    DriverLoader
    now you have any idea.. pleaseIs that a typo where you have two periods below?
    queryengine..driverImplOther than that I don't think anybody here can help you with that. If your classpath includes all necessary JAR files and you are able to access all your resources from within your application JAR file, then I imagine there is a problem with the third-party crystal decisions JAR file or how you are attempting to use it.
    My advice to you is to try and contact support with the vendor or provider of this API or possibly try posting on a support forum on their website to see if somebody can help you there.

  • Dynamic Selection on report not working

    Dear all,
    I have several reports on which the dynamic selection is not working. For instance, the report CN43N. The report is outputting all data in a year i.e it is disregarding the condition I specified in the dynamic selection fields.
    Is there some configuration to make to this report so that the dynamic selection works?
    Thanks for ur help.
    Nas

    Also Nelmaz,
    I have just checked OSS notes and found below note helpful to you:
    Note 1059465 - CN43N: Dynamic selections for scheduling data of WBS elemnts
    Symptom
    You cannot use transaction CN43N to create dynamic selections for scheduling data of WBS elements (table PRTE). You can use transaction CNS43 to do so.
    Hope this helps.
    Please assign points as way to say thanks

  • Report not working in my system

    Dear All,
    I have Developed a ZHR report. But the problem is the it is working only on my ABAPers Terminal(PC) and not on mine.
    Not working means the Action that it should trigger in PA40 is not happening.
    The Client is same.
    The User ID is same.
    The User parameters are same.
    The GUI Version is same.
    The authorizations are the same.
    Is there any other setting that i need to check.
    Regards,
    Saureb Bannerjii
    SAP HR Consultant

    hi,
    one possiblity is to check the user profile of your abaper's login and your login. If you are using different login id for checking the reports
    Regards
    SAmeer.

  • Report Not working in the Web Browser

    Hi ALL ,
    Am working on a item SKU report . The report is running fine in the BIDS but once i try to view the report in the WEB Browser
    tried both Mozilla and Internet Explorer no data is shows up .
    The report has 2 report filter one is on the service and the other one is the item sku its a multi - parameter  that contains
    a list of more than 6000 different SKU . Can the filter be the reason for the report not displaying in the web browser.
    If yes kindly advice me what the workaround for it .
    I tried having the filter in the  SQL main query but it was of no use no data it was showing after having the ssrs report filter
    at least right information its showing but in the BIDS not in the main web browser.
    Kindly Help
    Priya

    Hi Priya,
    According to the description, I understand that there are parameters (@SKU and @SKUlist) in the report, and SKUlist parameter is multi-value parameter. When selecting values of the SKU parameter, the parameter SKUlist will display corresponding values. In this
    case, you should create cascading parameters, right? And you use parameters to filter the report.
    Because the data of the report can be shown in the Business Intelligence Development Studio (BIDS) environment, the issue only occurs after deploying the report to report server. Based on my research, I think it may occur because of web browser issue. I have
    known you use Mozilla and Internet Explorer to view the report but there is still no data.
    In Reporting Services, not all report functionality is supported by all browsers. In this scenario, I suggest you considering the aspects of the setting or third party add-ons of Internet Explorer (IE). You can refer to the steps below:
    1. Click Tools -> Internet options.
    2. Switch to the Security tab, click Local intranet, and then select Default level.
    3. Switch to the Advanced tab, and click Restore advanced settings.
    4. Temporarily disable third party add-ons. For detailed steps, please see the link:
    http://windows.microsoft.com/en-IN/internet-explorer/manage-add-ons#ie=ie-10
    Reference:http://technet.microsoft.com/en-us/library/ms156511(v=sql.105).aspx
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • On Demand Sub-Report not working

    Hello,
    I am using crystal reports xi-r2 I am having trouble getting an on-demand sub-report to work. After much trouble I am able to get the sub-report to work in the designer but as soon as I publish the report and access it from the CRS. It stops working. I can not get the sub-report to come up. Or it opens another window like it is going to show the sub-report but I get the original report again.
    My second question is how do I open a trouble ticket now that this has all moved to SAP?
    Thanks for your help.
    Jeff

    As this isn't working in CRS you may want to re-post this to:  BusinessObjects Enterprise Administration
    www.service.sap.com would be a good place to go to get service

Maybe you are looking for