SCOM - Available Megabytes performance report is showing exponential data

We are running the performance report for counter 'Available Megabytes MB' in SCOM 2012 and it showing
Min and Max value in exponential format and not the correct format like in numbers.
Pls see the attached screen shot and suggest how to get the data in correct format of whole numbers in MB.
Anand Dutta

Hi,
the value is not exponential format  it is in scientific notation.
There's no option to change the scientific notation to real value. Unfortunately when SCOM reports encounter large numbrs they are displayed this way. Makes them less friendly, unless you're a math major.The problem is the field wasn't designed to hold many
characters. These values should be rounded in the report definition, but in many cases they are not.
Thanks,
sridhar v

Similar Messages

  • Performance Report Manager not collecting data

    I'm running SMC 3.6 with the Performance report manger module installed on the server and hosts. The hosts are logging data to their circular file. But when I open the Report Manager then Data-Data Collection there are no hosts listed in the "Hosts with Data Collection Enabled" or "Hosts with Data Collection Disabled" fields.

    PRM is sensitive to host naming issues. If your SunMC Agent resolves it's IP backwards to "hostA.mydomain.com" and your SunMC Server resolves that same IP backwards to "hostA" (or if the situation is reversed) then you'll have problems.
    If you do find a mismatch (but SunMC is otherwise running fine - indicating the security is still valid) simply try deleting the icon for a host and recreating it with the proper name. I.E. erase the icon you made for "hostA" and replace it with an icon for "hostA.mydomain.com". It will look and feel the same in the Console, but PRM will treat it differently.
    Note that PRM only collects data from the Agent every hour, so it may take that long for your changes to show any effect.
    Regards,
    [email protected]
    http://www.HalcyonInc.com

  • Reporting output shows no data

    hi everyone .. i have a problem with service manager reporting that it shows no data when i run any reports !! .. i have registered the data warehouse management server and its been months since the service manager has been installed so it has to be synchronized
    by now !! .. i have noticed that some of the data warehouse jobs didn't run such as
    MPSyncJob so i did run it from the console but nothing got solved .. i have also restarted the 3 services in both
    management server and data warehouse
    server but it didn't work also !! can anyone here help ??

    first of all thank u :) .. their status is not started and the
    sealed shows NO .. yes i used that link to edit in the credentials so i can access the data souses and i have tried to view reports from there but it also shows
    no data available .. the error i get from trying to open the [reportServer] and [ReportServerTempDB] using SQL server management studio is :
    The database ReportServerTempDB is not accessible. (ObjectExplorer)
    Program Location:
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.DatabaseNavigableItem.get_CanGetChildren()
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.RequestChildren(IGetChildrenRequest request)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ExplorerHierarchyNode.BuildChildren(WaitHandle quitEvent)

  • How to set the filter on a report to show the data for the Current Month

    Hi all,
    I am working on a report, which currently has this filter: Date First Worked is greater than or equal to 10/01/2010. This reports show the data for the current month, so at the beginning of each month we have to remember to change the date on the filter.
    Does anyone know what the criteria should say, so that it automatically changes and shows the information for the current month, without us having to go in and change anything?
    Any help would be greatly appreciated!
    Thanks,
    AA

    You need to add a session variable to date fir worked assuming that this is a date field.
    To do this open up the filter on the field then at then press add Variable then "session" and enter the following CURRENT_MONTH into the Server Variable section.

  • Report Builder showing duplicate data

    Hi everyone!
    When adding sub reports to my table, it now duplicates/repeats the data many times.
    why is this happening and how do I stop it?
    Thanks :)
    Allana

    Hi Allana,
    When I directly insert a subreport without any parameters to a details row cell, I can easily reproduce this issue in my environment. Generally, if we want to avoid this issue, we must design a parameterized report (for example, a report that shows the details
    for a specific customer) as the subreport. For more details, please refer to the following steps:
    Create a parameter, then add a filter based on the parameter to filter the data in the subreport.
    In the main report, insert the subreport with the corresponding parameter values.
    Then we can filter the subreport based on the parameter values to eliminate the duplicate data. Besides, we can also add a group in the main report to avoid the duplicate data in main report.
    References:
    Tutorial: Adding Parameters to a Report (SSRS)
    Add a Subreport and Parameters (Report Builder and SSRS)
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Report Viewer shows incorrect data when viewing pages from last to first

    Post Author: Fmorales
    CA Forum: .NET
    Hello.
    I've made a huge report with Crystal Reports for Visual Studio 2005, and sometimes the Report Viewer show data with errors.
    If I see all pages of my report in order, 1 first, then 2nd, 3, 4... until the last one.... The report is always correct.
    If I see all pages in reverse order, 1 first (shown by default), then last one, then last one-1.... until 2nd.. All years show incorrect, except first one... 
    In an outer section, for every year, there is a final row which shows summarize calculated data. The error consists in that every value of the row is 0.
    It seems that Crystal Report calculates while showing, that's good.. but... Why does it ignore the data before when I see directly the last page?? It forces me to see all pages one by one in ascendant order to ensure data is correct.. I must fix that error.
    The way I calculate data in the problematic summarize row is a bit complicated, but I'll try... Let's focus in one only column (the other ones are similar). The summarize value is a formula which simply show a global value :
    WhilePrintingRecords;
    CurrencyVar margenActual;
    which is being increasing or decreasing along the group:
    WhilePrintingRecords;
    CurrencyVar actual:=actual+CurrentFieldValue; 
    if {PresupPeriodifMesesAux_DS.TIPO} = 'PAGOS' then         CurrencyVar margenActual:=margenActual-CurrentFieldValueelse    CurrencyVar margenActual:=margenActual+CurrentFieldValue;
    DefaultAttribute
    It is placed in the backgrond property of a CrossTab cell in a hidden pre-section... Well.. I know it's a bit complicated, but I have to do that way because it was the only trick I found to make a summarize file before printing data summarized (that's why the line "CurrencyVar actual:=actual+CurrentFieldValue;" appeared in formula). So I also wanted to use this formula to acummulate "margenActual".
    In the inner section I reset the actual value (this value always go fine):
    WhilePrintingRecords;
    CurrencyVar actual:=0; 
    Before end of year I reset the margenActual value:
    WhilePrintingRecords;
    CurrencyVar margenActual:=0; 
    I've tried multiple combinations (using WhileReadingRecords instead WhilePrintingRecords) but data is incorrect or I cannot get rid of visualization page's problem....
    Any idea?
    Thanks a lot

    quote:
    Originally posted by:
    ntsiii
    If you were previously using <mxXML> you WERE using
    e4x.
    So remove that tag, create an instance variable of the same
    name, typed as xml, and in your result handler, do as VarioPegged
    suggests, though I would cast/convert to xml first:
    companies = XML(event.result);
    trace(companies.toXMLString()); to look at your xml
    var xlCompanies:XMLList = xmlCompanies..company; //all such
    expressions return XMLList, never XML
    trace(xmlCompanies.length()); //
    Tracy
    Ok so the ID of the mxXML was being interpreted as an E4X
    variable at compile time?
    I tried changing the name of the ID of the HTTPService call
    from "marketData" to "MDATA" and assigning the variable marketData
    to the result of the HTTPService query, which if I understand you
    correctly should basically make everything work as it was before,
    but it seems to be a problem.
    when I try to run it puts an exclamation point on this line
    <toolbox:TreeMap id="treeMap" width="1200" height="800"
    dataProvider="{marketData}"
    labelField="@cname" weightField="@amount"
    colorFunction="{itemToColor}"
    toolTipFunction="{itemToToolTip}"/>
    That code refers to a SWC file. Apparently it wants
    marketData to be a data provider. If I change the dataProvider
    reference above to "MDATA" (the ID of the HTTPService) the App
    compiles, but I get two errors at runtime:
    TypeError: Error #1009: Cannot access a property or method of
    a null object reference.
    ReferenceError: Error #1081: Property @age1 not found on
    mx.rpc.http.mxml.HTTPService and there is no default value.
    What should I change this reference to? It won't compile if I
    use the variable I made for the e4x results and it is reading
    gibberish if I have it read directly from the
    HTTPService....?

  • Purchase requisition report not showing any data R12.04

    when i run "Printed Requisitions Report". Report run without any information.
    EBS R12.04

    Please refer to Note: 472332.1 - R12: Printed Requisition Report Ends With "No Data Found"
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=472332.1

  • DCH Report not showing what Data collection Value at Particular Operation

    Hello,
    I need one help regarding the DCH that is Device History Report, I am doing data collection at particular operation but when I look at DCH I can see all the Operation to that SFC but I canu2019t drill down to look what data I had enter as a part of Data collection.
    Regards
    Suhas

    Hello Suhas,
    Please make sure that you have configured Device History tab in User Preferences Maintenance.
    Regards,
    Alex.

  • SCOM 2012 SP1 availability report in MS Generic Report Libary shows inaccurate data

    Hi,
    in SCOM 2012 sp1, we have the generic availability report showing many of our web sites with no up time beyond a certain date.   The web sites are ok,  the web availability monitors are all healthy and the monitors test ok
    None of these web availability tests are in Maintenance mode although what we are observing certainly makes us think that they are.
    We also have a Web transaction login monitor for WEBSITE(A)  that does not show this same outage for a login test.
    However WEBSITE(A)'s availability monitor shows the same downtime as the other web availability tests.
    Any thoughts on where to look for this problem?  Im guessing its a problem placing the data in the Warehouse?
    Thanks Lance

    Hi,
    Based on my understanding, the report shows there is downtime for the web site, but the web site did work well always.
    It seems like that there is old data stored in data warehouse, would you please check the report for recent date, such as one day or two days.
    Regards,
    Yan Li
    Regards, Yan Li

  • SCOM 2012 SP1 - Scheduled Report not showing any chart

    We have created 2 Scheduled Reports based on the Performance and Performance Details reports.
    The Scheduled Reports run every day and create a PDF file in the file share.
    The Reports however don't contain any charts. Selecting other output formats gives the same results...no charts. There no errors visible and no errors reported in the EventLogs.
    Does anyone know what might be the cause of this?

    Hi,
    Please ensure the reporting service is configured correctly. Meanwhile, check if the following KB is helpful.
    http://support.microsoft.com/kb/972821
    Niki Han
    TechNet Community Support

  • Network Management Reports not showing any data on scom 2012 r2

    Hello,
    I have imported Windows Server operating system Management Packs and it  started monitoring the windows server system and network adapter state showing healthy state for all the adapter attached to  Virtual Windows Server 2012 Machine.
    but none of data showing on Network Management Reports ,all the other reports are working properly. If  Its need to enable some monitor which are disable by default, pl z list what are the monitors how to enable those monitors?
    May I first need to Deploy agent particularly on network adapter ?
    Regards
    RICHA KM

    Hi,
    I think you could start from here:
    Monitoring Networks by Using Operations Manager
    http://technet.microsoft.com/en-us/library/hh212935.aspx
    System Center Operations Manager 2012: Network Devices with Extended Monitoring Capability
    http://www.microsoft.com/en-us/download/details.aspx?id=26831
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SharePoint 2010 Site Web Analytics - Top Pages report not showing complete data

    Hi,
    I have a custom page in a team site which takes list ID as an argument and shows the relevant data e.g.
    ../Dashboards/View%20Briefing.aspx?BriefingID=1078
    ../Dashboards/View%20Briefing.aspx?BriefingID=1079 etc
    When i look at the Top Pages report under Site Web Analytics all i can see is data for:
    /dashboards/view briefing.aspx
    I need stats for individual list items i.e. how many time BreifingID 1078 was viewed etc. Is it possible to achieve this using OOTB reports or can i write a custom report to achieve this? If yes then how...
    Any help would be appreciated.
    Regards,
    Kashif

    You’re dynamically filtering content on a single page with values on the query string. Your users are still only hitting one page (View%20Briefing.aspx). Analytics only sees that 'View%20Briefing.aspx' is being hit; it won’t record stats for what’s specified
    on the query string.
    I expect you could pull this data out of your IIS logs using log parser. Some links on this subject:
    http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=85
    http://blogs.technet.com/b/corybu/archive/2008/02/26/sharepoint-iis-traffic-analysis.aspx
    http://social.technet.microsoft.com/wiki/contents/articles/16072.sharepoint-2010-create-analytic-reports-using-logparser-and-powershell.aspx
    http://blogs.msdn.com/b/carlosag/archive/2010/03/25/analyze-your-iis-log-files-favorite-log-parser-queries.aspx
    http://logparserplus.com/Examples

  • Links in Reports Not Showing Correct Data

    Good Afternoon!
    I've recently found that the links in some reports are not working as they should.  Below is an example from a report I just tried:
    Example
    I ran the report "Count of all instances of specific software registered with Add or Remove Programs" and selected a specific Collection I had created.  The report ran as it should and displayed a list of all software titles and versions for all of
    the collection's workstations combined.
    One application has 5 different versions installed amongst the collection and I need a list of them.  Each of the 5 versions was listed and each had a link.  When clicking on the link, though,
    it showed a list of "all systems" workstations which had the application / version - not just the number of or machines from the collection the report was run on.  Long story short, the report displayed about
    11 machines, but clicking on the link showed a list of about 40.
    I don't know if this is by design, but it's really difficult to work with.  I am having to make individual queries for the data which takes much longer.  Is there a resolution to this?
    Thank You!
    Ben K.

    Yes, I know this is an old post, I’m trying to clean them up, Did you figure this out, if so how?
    Yes this is be design however you can modify the "Computers with specific software registered in Add Remove Programs" report and have it filter on both the SW title and collection.
    http://www.enhansoft.com/

  • Siebel BIP report not show correct data when current view=my programs view

    Dear All,
    I have report that contain field approval,
    which is when i login as 'SASKIA' as example then i want to print report budget request,
    this report contain field approval like :
    Employee Login
    HOKIONO     
    BAMBANG
    PONGKY
    SASKIA
    but when i print the report it just show:
    Employee Login
    SASKIA
    and it happened only if i print report in 'MY Programs' view,
    the report show ok in 'All Programs' view.
    and when checked in siebel tools, IO Program Container(that used in report), the link already set to all.
    Please help me on this.
    Best regards
    Cecilia

    try adding a user property to your integration object:
    User Property Name: "ViewMode"
    User Property Value: "All"
    see if it has any effect - for me it solved some issues with data not being displayed!
    Benny

  • BPMon alert reporting not showing any data for Trend Analysis

    Hi,
    I have setup BPMon and performed the initial setup for BW reporting. There are alerts being generated by the BPMon setup and the data has been transferred to the 0SM_BPM cube.
    But when I start the Trend Analysis report I dont get any Solution for selection to generate the trend analysis chart.
    I have followed all the steps mentioned in the setup guide. Please suggest any remedy.
    Regards,
    Vishal

    Hi ,
    If your query is on multiprovider , then makesure to check there are no restrictions/filters on cubes.
    Also inlcude any keyfigure from the cube,where other characteristics are being assigned from or where u r seeing data, in the query.
    If you dont want to see the Keyfigure, u can hide it using keyfigure display properties in the query designer.
    Hope this helps,
    Aparna Duvvuri

Maybe you are looking for