SCOM Connector - Find Computer Host of SQL Database relationship

Hi,
I have synced my SQL Databases over til SCSM via the SCOM CI Connector. Using the "Microsoft SQL Server Core Library" MP.
How do I get it to include the Computer Host as a relationship to the database? I think it's rather important to know on which Computer the database resides.
In the management pack, I can see this relationship: Microsoft.SQLServer.WindowsComputerHostsDBPerspective . Which might be it, but I have really know idea what DBPerspective is, and it's not being discovered anyway.
Can anyone explain how this work or have anyone got it to work? Maybe I just need to use the right management packs or something.
Thank you.

Ok, but I can't seem to find the relationshipclass for the component. Can you point me in the right direction. Searching for database gets me this:
Microsoft.SQLServer.2008.DatabaseHostsPublication Source Target
Microsoft.SQLServer.2008.DatabaseHostsSubscription Source Target
Microsoft.SQLServer.2008.DistributorContainsDatabase Source Target
Microsoft.SystemCenter.ServiceDesigner.WebApplicationContainsDatabaseGroup Source Target
Microsoft.SystemCenter.ServiceDesigner.WebSiteReferencesDatabase Source Target
Microsoft.SystemCenter.ServiceDesigner.DatabaseGroupContainsDatabase Source Target
Microsoft.SQLServer.DBEngineHostsDatabase Source Target
Microsoft.SystemCenter.DataBaseGroup.ContainsOpsMgrDBWatchersGroup Source Target
Microsoft.SystemCenter.DataBaseGroup.ContainsOpsMgrDWWatchersGroup Source Target
Microsoft.SystemCenter.ManagementGroup.ContainsDatabaseGroup Source Target
But I can't seem to find any relationship where both Computer (or instance) and Database is together.

Similar Messages

Remove decommissioned SQL database from SCOM

Hi,
In SCOM 2007 R2, we have few SQL databases which have been decommissioned & removed but, they are still in Healthy state in SCOM.
How can I remove these entries from SCOM? I want to remove only the databases.
TIA.

Try this -
1) Log in to those SQL servers
2) Stop System center management(SCOM health) service.
3) Rename Health Service State folder located at "c:\programfiles\system center operations manager\agent\Health Service State:.
4) Restart System center management(SCOM health) service.
5) Wait for few minutes so that discoveries can run again and then check in the SCOM console. Those Databases should go away now.
Please let me know if this did not help or if this is not what you are looking for.
Thanks, S K Agrawal

I need to host a website with a SQL database - Azure pricing details are too confusing

Hello,
I need to give a potential client a hosting price for a somewhat simple web application they want me to build. I told them it shouldn't be a problem. After gathering the requirements, I figured I would use the following technology to build and host
it:
ASP.NET 4.5
MVC 5
1 SQL Database ~ 25GB with options to expand and also with a backup
SSL certificate needed
Hosting would be on Azure because I have some experience using Visual Studio 2012 and integrating the Visual Studio Online (TFS) source code and scrum web applications. I've never actually spun up a website with a SQL database using Azure before, but I
imagined it wasn't too difficult to find a general hosting plan to support the above requirements.
The use of the website will be very simple and limited to the basic CRUD operations. Will support forms authentication using the Identity 2.0 framework. The web applications main purpose is to fill out a form for new accounts, have a search page for
those accounts, a page to view a created account and add notes to it. So performance wise, it isn't asking for much. I just want it to be fast and secure.
So I start looking on the Azure's pricing landing page which is here: (can't put links in here, but search Azure pricing on Bing) and I see this Pricing Calculator, so I click it
First thing I notice is the Websites tab doesn't mention SQL Database - in fact the Data Management is a separate tab from Websites. And if I made my selections on the Websites tab, the estimated monthly price doesn't stay the same when I go to the Data
Management tab - so I get the illusion I have to have two separate purchases.
I'm not exactly sure if the Pay as You Go billing feature would be okay because it's just a bit scary to leave every monthly payment up to chance; somewhat. Would love to know if there is other payment options that I could see for what I described above.
I want to use Azure to host my asp.net website - it makes sense and the integration with Visual Studio is amazing. I love the publish feature for both MVC 5 Projects and SQL Database Projects.
Thanks in advance for the help!

Hello jdevanderson,
I suggest that you start by looking at the pricing TIERS for the Azure website. This link will give you clarity on different Service TIERS that are availaible:
http://azure.microsoft.com/en-in/pricing/details/websites/
You can guage your requirement and choose the Service TIER accordingly.
And regarding the database, you are right about it. You will be charged seperately for the database. You can refer to this link that will give you clarity on SQL database pricing:
http://azure.microsoft.com/en-in/pricing/details/sql-database/
Refer to this link for more information on 'How pricing works':
http://azure.microsoft.com/en-in/pricing/
Use the full calculator to add your website and the database to get an estimated cost:
http://azure.microsoft.com/en-in/pricing/calculator/?scenario=full
Thanks,
Syed Irfan Hussain

Upload the sql database to host and manage it

hello
i have window 8.1
sql server express 2014
visual studio 2013 express
i have built a database and i am ready to copy it to the host.
not in vs or in sql.s i have found the.. connect to remote server..
i have looked on google >> its say use the
SQL Server Configuration Manager that is under the Client Tools Connectivity installation..
or search your pc for "SQLServerManager11.msc"
but i got none!!!
not the SQLServerManager11.msc
not
the Client Tools Connectivity
not the SQL Server
Configuration Manager
and i dont know how to upload the sql database to the host and manage it...

thank you for replying
my installation where sql server express with advanced tools..
i have to say that the normal installation didnt work for me.. using the my_downloader_installer.exe, the akamia NetSession interface run into some error - file use by another process... and restarting the pc didnt solve the issue...
i found an alternative way to install
on http://www.microsoft.com/en-in/download/details.aspx?id=42299
and download the SQLEXPRADV_x86_ENU.exe that supposed to
be with the tools
(but could not found the tools).. so i have tried to install the SQLManagementStudio_x86_ENU.exe
>> only the tools...
but i got that error
TITLE: SQL Server 2014 Setup
There are validation errors on this page. Click OK to close this dialog box. Review errors at the bottom of the setup page, then provide valid parameters or click Help for more information.
BUTTONS:
OK
and the information page lide me to no where.. >> so general info about different installation packages..
but:
i do think i do have that SQL Server Configuration Manager
cause when i run the
USE master;
GO
EXEC sp_helpserver ;
USE master;
EXEC sp_serveroption 'Y-PC\SQLEXPRESS', 'collation compatible', 'true';
i got
name network_name status id collation_name connect_timeout query_timeout
Y-PC\SQLEXPRESS Y-PC\SQLEXPRESS rpc,rpc out,collation compatible,use remote collation 0 NULL
0 0

How to find SQL database configured users without studio management .

Hello Guys,
Please how do I find the configured users on my sql database without using SQL studio management. Is there a way to find figured users through registry?
Regards, MassonTech

Hello,
No, you can't get it from registry.
You must be connected to the SQL Server/database to query this information from the database; you can't get it from anywhere else.
If you don't have SSMS installed on the machine, then you could use the lightweight tool "SqlCmd.exe", there is a separate installer for it available.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Manipulating sql database on a remote host iphone

well i want to manipulate an sql database on a remote host. The database will have an id and a value. I want to add my id and my value using my iphone and read some id's from the database could you tell me if i can do that on iphone and what tools will i need (like sql lite or what).
Sorry for my bad english.

PostgreSQL is a popular open source database which has ported their C client library to iOS. I am not aware of the MySQL client library having been ported to iOS, but that is something you can research. An intermediary web service would be something you write (PHP, Groovy, .NET, etc) that would handle requests from the iOS apps and respond with responses are appropriate after executing the SQL statements after proper validation and error checking of input statements. You can send data in JSON or any easy to use format.

Upload sql database to hosting company

Hi folks, quick question,
I create asp.net web application and sql database, I have then created App_Data folder within my application and pasted the MDF & log files into this folder, but my application is still not working!
Works ok on the localhost.
Any tips or advice much appreciated.

You have to Restore/Attach the database to an SQL Server Database Engine and refer it from your asp.net code by using the connection strings.
Sandesh Segu | www.SansSQL.com

Form created with Livecycle Designer with a SQL database - do you need LiveCycle Forms installed?

Hello,
I'm REALLY hoping someone here can help me, I have spent over four hours on the phone to Adobe in the last 3 days and I'm getting no where what-so-ever. I can't even find out where /how to complain about it! (but thats another story)
Here's my situtation:
I work for a company with approx 140 staff. On one computer, we have Adobe Livecycle Designer ES installed, and we have used that program to create a form which has a link to a SQL database.
The link in this form doesn't work on the other computers which has the basic (free) Adobe Reader. From doing research within these forums
, I have found that the form will not work on other computers unless they have Adobe Livecycle forms installed on their machines.
What I need to know (and what they cannot seem to tell me when I call), is two things:
Is it correct that in order to use a form created in Livecycle Designer which has a link to a SQL database, that the machine must have LiveCycle forms installed?
How much does Adobe LiveCycle Forms costs?
PLEASE, if you can answer this question, I would REALLY appriciate it....
Thank you!

I presume you are asking if you need Livecycle Forms ES? Forms ES is a component of the livecycle software suite intended as a document service which will be installed on a server within the organisation. A couple of things this document service can do is to render XDP into multiple formats (PDF, html, etc.), execute script server side (for example the database connection) on behalf of the client (reader, etc.), integrate with backend components, etc. So no you do not install this on each client.
For database connections to work, you either have a server with Forms ES installed which can connect on each clients behalf (ie. Client->Forms ES Server->Database), or you have a reader-extended PDF to allow connections to be use in the free basic Reader (i.e. direct calls to the database or using web service calls to your own database components). However, reader-extended pdf would probably require Reader Extensions ES component installed on a server (you once off extend your developed pdf through this and then hand it out to each of the end users). Not sure if the Acrobat Reader extensions will cover this functionality since I have not tried that. I dont think it does. Otherwise you would need full acrobat on each client.
How much database integration is your form actually doing at the moment? read only? Full access? And how many clients do you expect to hit your database? Depending on what you need the form to do, there is always the option to try and build the integration yourself. Do simple http submits from the browser (hosting reader as a plugin) to some component somewhere which in turn hits your database. Wouldnt require additional licensing but alot more development work.
As for cost for the various components, thats a question only Adobe can answer for you since they all sit squarely in the enterprise space and licensing for that is not as simple as off the shelf products.
Maybe someone else has a view on it or has an alternative.

Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\120 registry key.

Dear Expert,
I setup SharePoint for 3 tiers, WFE, APP + DB Server.
I installed SQL 2014 reporting service Add-in on APP Server and already enable sql reporting service in DB Server. DB Server can do report server.
I follow the step : https://msdn.microsoft.com/en-us/library/jj219068(v=sql.120).aspx but I stuck in no.2, I cannot start the services, in picture below.
I checked the SSRS provision is disabled not online
Please help.

Hi MasterBird,
According to your description, when you register and start the Reporting Services SharePoint Service, the error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\120 registry key is thrown out.
As this
article say, if you use three-computer deployment, the first computer hosts an instance of a SharePoint product. The Reporting Services Add-in is installed on this computer. The second computer hosts SQL Server Reporting Services and the third computer
hosts an instance of the Database Engine.
Regarding the error message, it could cause by the Reporting Services – SharePoint feature and Reporting Services Add-in for SharePoint Products haven’t been installed. Please refer to articles:
SSRS SharePoint 2013 Create Service Application error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key Error
Installing SSRS 2012 in SharePoint Mode on SP2010
If issue persists, please check the error detailed information in ULS logs, and check Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log to see if any error occurred during set up. For more information, please refer to this article:
Troubleshoot a Reporting Services Installation.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Reportings Services in a 2-Tier Architecture / (Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key. )

Hello,
we want to install Reporting Services in a 2-Tier Architecture. The Servers are the following:
SERVER1: Windows Server 2012 and SQL Server 2012
SERVER2: SharePoint 2013 (WFE)
Reporting Server is installed on SERVER1 and running. On SERVER2 the registration of the service through Powershell was done but it does not start. An Error when starting the Service on the server occurs with the message:
"Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key."
I have found the following in msdn stating that a minimal of the same SharePoint Installation must exist on the Reporting Server. The article is for SQL Server 2008 R2 and SharePoint 2010. Is this the case also for SQL Server 2012 and SharePoint 2013 and
the root of the problem? http://msdn.microsoft.com/en-us/library/bb510781%28v=sql.105%29.aspx
If so does this mean that I require for the installation another License?!?!
Thank you in advance!

Hi,
According to your post, my understanding is that you wanted to install Reporting Services in a 2-Tier Architecture.
As the article
say, if you use Two-Computer Deployment, the first computer hosts an instance of a SharePoint product. The Reporting Services Add-in is installed on this computer. The second computer hosts SQL Server Reporting Services and the Database Engine.
The steps to install in a two-tier environment are very similar to a standalone environment hence you can go to refer to the ' Install Reporting Services SharePoint Mode for SharePoint 2013' article at http://msdn.microsoft.com/en-us/library/jj219068(v=sql.110).aspx
To install in a two-tier environment, you can refer to:
How to setup, configure and test
SQL 2012 SP1 SSRS with SharePoint 2013 SP1
Best Regards,
Linda Li
Linda Li
TechNet Community Support

MBAM server issues connecting to SQL database

Hi,
I've recently setup and configured MBAM, however the Application Log on the MBAM server shows lots of the following errors:
Event code: 100002
Event message: SQL error occured
Event time: 05/10/2011 3:55:55 PM
Event time (UTC): 05/10/2011 7:55:55 AM
Event ID: 85c2614c7ff44f91b511b228aa6063a4
Event sequence: 16
Event occurrence: 15
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/2/ROOT/MBAMComplianceStatusService-1-129622739405401050
Trust level: Full
Application Virtual Path: /MBAMComplianceStatusService
Application Path: C:\inetpub\Malta BitLocker Management Solution\MBAM Compliance Status Service\
Machine name: HZL-MAN-016
Process information:
Process ID: 780
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: SqlException
Exception message: Login failed for user 'DOMAIN\HZL-MAN-016$'.
Request information:
Request URL:
Request path:
User host address:
User:
Is authenticated: False
Authentication Type:
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
Thread ID: 3
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.MBAM.ReportingService.DataProcessor.ProcessStatusReportInfo(StatusInfoType reportInfo)
Custom event details:
Application: MBAMComplianceStatusService
Sql Server: HZLSQL05
Database: MBAM Compliance Status
Sql ErrorCode: 18456
Error Message: Login failed for user 'DOMAIN\HZL-MAN-016$'.
Can anyone help ? The SQL server that hosts the MBAM databases shows the following logs:
Login failed for user 'DOMAIN\HZL-MAN-016$'. [CLIENT: xxx.xxx.xxx.64]
Thanks

just noticed in the Details view of the Event 18456 on the SQL server that it references the master database, do I need to do anything to the master database to make this work ? Error below:
+
System
Provider
[ Name]
MSSQLSERVER
EventID
18456
[ Qualifiers]
49152
Level
0
Task
4
Keywords
0x90000000000000
TimeCreated
[ SystemTime]
2011-10-18T01:12:37.000000000Z
EventRecordID
1515127
Channel
Application
Computer
HZLSQL05.int.bgc-contracting.com.au
Security
[ UserID]
S-1-5-21-1183060287-1205496975-829235722-104624
EventData
BGCCP\HZL-MAN-016$
[CLIENT: 172.xxx.xxx.xxx]
184800000E0000000900000048005A004C00530051004C00300035000000070000006D00610073007400650072000000
Binary data:
In Words
0000: 00004818 0000000E 00000009 005A0048
0008: 0053004C 004C0051 00350030 00070000
0010: 006D0000 00730061 00650074 00000072
In Bytes
0000: 18 48 00 00 0E 00 00 00 .H......
0008: 09 00 00 00 48 00 5A 00 ....H.Z.
0010: 4C 00 53 00 51 00 4C 00 L.S.Q.L.
0018: 30 00 35 00 00 00 07 00 0.5.....
0020: 00 00 6D 00 61 00 73 00 ..m.a.s.
0028: 74 00 65 00 72 00 00 00 t.e.r...

Error when save date in SQL database

Hi all,
I try to save a date in to a sql database, but when I run my program I get following error:
Invalid object 11/21/05 9:32 AM of type java.sql.Date assigned to host variable 3.
In my database table I have a fields date (type Data)en time type(Time).
this is the source:
     public void createTitle(int title_id, String description, String user)
          throws SQLException {
          // TODO Auto-generated method stub
          Date date = new Date();
          String dateFormat = "YYYY-MM-DD";
          String timeFormat = "HH:mm:ss";
          SimpleDateFormat ddf = new SimpleDateFormat(dateFormat);
          SimpleDateFormat tdf = new SimpleDateFormat(timeFormat);
          String det = ddf.format(date);
          String creationTime = tdf.format(date);
          PreparedStatement newTitle = conn.prepareStatement("INSERT INTO BE_TITLE (TITLE_ID, DESCRIPTION, DATE_CREATE, TIME_CREATE, USER_CREATE) VALUES (?,?,?,?,?)");
          try{
               newTitle.setInt(1,title_id);
               newTitle.setString(2,description);
               newTitle.setDate(3, new java.sql.Date(date.getTime()));
               newTitle.setTime(4, new java.sql.Time(date.getTime()));
               newTitle.setString(5, user);
               newTitle.executeUpdate();
          }finally{
               newTitle.close();
Can someone give me a solution for this error
Richard

Hi Richard,
in your application, you atempt to insert a java.sql.Date value into a DATE column, which has non-zero time-components. Open SQL rejects such an atempt.
Please allow me to quote from the OSS message (452727 2004), which Detlev refers to in his quote:
<i>
about one year ago, we had a very lengthy discussion on this issue - not only internally at SAP but also with Jonathan Bruce, the specification lead for JBDC at Sun.
We have the following dillema:
The javadoc of the constructor java.sql.Date(long) states:
"If the given milliseconds value contains time information, the driver will set the time components to the time in the default time zone (the time zone of the Java virtual machine running the application) that corresponds to zero GMT."
With Jonathan Bruce, we tried to clarify when this normalization should take place.
1) Source code inspection shows that it is not the class java.sql.Date the performs the normalization.
2) The Javadoc states that the JDBC driver should perform the
normalization. If it is the driver, more open questions arrise:
a) When shall the normalization be performed?
   - if a setDate method is invoked?
   - only for INSERT and update statements or also for all other parameters?
   - shall the getDate method perform the normalization?
   - what about set/getObject?
   - the java Docs of set/getDate don't tell anything about normalization.
   - according to which time zone shall the value be normalized?
     - UTC
     - vm time zone?
     - database time zone?
3) If an automatic normalization is performed, data will be modified upon insertion (or extraction) from the database. This means that we cannot quarantee if we insert and Date object retrieve it again that the two objects will be equal.
In the discussion with Jonathan, we couldn't clarify the issue. However, Jonathan promised that the JDK should be modified in such a way that the JDK is responsible for the normalization. (So far such a change has not been done).
In order to be on the safe side, SAP chose that Open SQL should reject any Date values that are not normalized. This is what we have
implemented and documented. I agree, that in this repect, Open SQL is stricter than the JDBC standard demands.
To help the application with the task to normalize a Date (and Time) object, we offer the helper class
com.sap.sql.DateTimeNormalizer which you find in opensql.jar.
To come to a conclusion, the bevavoir you observed is from our side not a bug of Open SQL but a feature. Please use DateTimeNormalizer to normalize Date objects appropriately.
</i>
I hope, you can follow our reasoning.
Best regards,
Adrian

SSRS for SCOM 2012 need separate instance of SQL

Hi All,
My customer has planned to install SCOM 2012 R2 in their environment. I designed for them as followings:
Planned 3 MS servers namely, MS1, MS2 & MS3
The rolls planned on those MS servers as follows:
MS1 – Management Server,
Operation console & Web console
MS2 – Management Server,
Operation console & Web console
MS3 – Management Server,
ACS, SQL Reporting services & SCOM Reporting server
Customer has their existing SQL cluster database configured. This existing SQL database is also utilized by other applications.
I am planning to keep all the SCOM databases (Operation Manager DB, Operation DW DB, Reporting DB & ACS DB) on the central location on SAN storage of the SQL cluster.
For this, I requested to customer for a new instance of SQL to install SCOM DBs & SQL Server Reporting services.
Customer raised a concern on Why would need to install the databases & SQL Server Reporting services on a separate instance.
I replied as, The new instance requested will host the databases along with the SQL Server reporting services (SSRS).
The installation of SQL server report server will integrate the security of selected SSRS instance with Operation Manager role based security. Any reports that were previously installed on this
SQL server instance might become inaccessible. No other applications that are using SQL Server Reporting Services can be installed on this instance of SQL Server.
On this, Customer says if SSRS is planning to install on the MS3 server then there would not need to create a separate instance on SQL cluster. We can go with the existing instance for installation
of SCOM databases on SQL cluster and SSRS on MS3 server.
I need your inputs on this, as can I still require the new instance of SQL on SQL cluster or can go with the existing instance for installation of SCOM databases on SQL cluster and SSRS on MS3 server.
Kindly provide your inputs.
Regards,
SandeepK

Although SCOM can share a single instance running SQL Server to store data, this is not a recommended configuration. The SSRS is the same, no document says that it can be shared with others.
Also, refer to
http://social.technet.microsoft.com/Forums/en-US/84e89021-6794-421e-b41c-5da1186aae2e/sccm-and-scom-reporting-on-the-same-sql-instance?forum=configmgrreporting
Juke Chou
TechNet Community Support

Submit pdf form data to sql database

Where I can find detailed information on the process of sending data from pdf form stored on the website to the sql database stored on web server ?? Where I can find some samples I could use to build my form and related script(s).
Thanks for advice.
Tony

Hi Paul,
Thank you very much for your quick response. I can not retrieve your
attachments, so please send them by email. Thank you.
What does it mean that DSN has to be set up on each machine which will run
the form ??? Does it mean for each person who will use the form ?? or
rather once on the server where the form is hosted ??? It will be a bit
difficult to use if it will have to be installed on each user computers as
some users may not be happy to do it. If this is the case do you have any
solution you would recommend which will collect the data from the form
without asking users to do anything special on their computers ????
Regards,
Tony Pluta
Graphics Designer
Broadmeadow Road
Broadmeadow NSW 2292
Australia
Direct: +61 2 9492 1277
Facsimile: +61 2 9462 1383
Mobile: +61 403 399 167
[email protected]
www.unitedgroupltd.com
pguerett <[email protected]>
22/04/2009 10:31 PM
Please respond to
[email protected]
To
Tony Pluta <[email protected]>
cc
Subject
submit pdf form data to sql database
If you want the form to contact the DB directly you will have to set up a
DSN on each of the machines that will run the form. Note that this wil
only work on Windows machines. Also the form must be launched for the
script to run (you mentioned the PDF was stored on the web server). I have
some samples that show how to deal with a DB but the attachments do not
seem to be working correctly on the forum yet. If you cannot retrieve them
post your email and I will email them to you directly.
Paul

Training - Will Adobe Connect Pro provide access to an SQL database?

Hi,
I'd be totally indebted to find out the following information regarding Adobe Connect Pro as we're evaluating it for hosting Captivate created content.
Background: Adobe has an API and we are hoping that we can make our own custom form and then upload additional Trainee information (say they have two cell numbers or their birthdate) into the hosted Adobe Connect site for our training. We want Trainees to be able to register themselves via a form that we host and have the push in via the Adobe Connect API. It's too painful for us to have to make a userid for the trainees each time.
Question 1) Is there a way for us to get access to the SQL Trainee database hosted with Adobe Connect? If so how is that done?
Question 2) Will the custom values (e.g. the phone and birthdate) that are made on our form and passed to Adobe Connect's LMS viewable by the Admin Reports interface?
Question 3) Will the custom values (e.g. the phone and birthdate) that are made on our form and passed to Adobe Connect's LMS viewable wihin the SQL database if we have access to that (see question 1).
Thank you!
Dave

Thanks you for the post.
http://moviesonlineworld.com

SCOM Connector - Find Computer Host of SQL Database relationship

Similar Messages

Maybe you are looking for