SCOM : Issues while upgrading SCOM agent from 2012SP1 to R2
Hi,
We have upgraded SCOM setup from SP1 to R2 but facing issues with agent upgrade.
We were able to view only ~70% agents in pending management (Agent requires update).
Further, when I tried to upgrade agents through console, some are successfully upgraded but rest are giving
error.
Can someone help me to understand why all agents are not appearing in pending management for upgrade?
I also tried to upgrade agent manually but no luck. It gives error "The path 'C:\Windows\.........\monagent.msi'
can not be found. Verify that you have access to location and try again or try to find installation package.........". , though I had logged into server with admin access.
Also most of servers are remotely manageable but unable to upgrade through console.
Thanks,
Priya
Hi Priya,
I understand you require the Agent data. How ever the events clearely say the issue is because of the old installation files.
I was looking a a article on updating an agent to SCOM 2012 R2 from the below link.
https://technet.microsoft.com/en-us/library/dn249715.aspx
So the link says:
When you upgrade an agent, the Operations Manager installer service runs and is not removed until after the completion of the upgrade.
If the agent upgrade fails, you might have to re-install the agent because the installer service was not properly removed. If you attempt to upgrade the agent again and it fails, you should re-install the agent after you have completed upgrading all features
of Operations Manager.
So i would suggest you is you try the below on only 1 agent.
1. Download the Agent Dump from the below link and try updating it. (This is my copy of MOM Agent.msi from my installation media of SCOM
2012 R2)
https://www.dropbox.com/s/wv7y37moyd04209/MOMAgent.msi?dl=0
If the above does not success and gives you the same error then try the below
1. Select an agent and pull all the perfmon data / Alerting data required for it using SQL Query or Reporting.
2. Uninstall the Old SP1 Agent setup.
3. Install the Agent via Discovery Wizard or do a manual installation and see if the issue resolves.
I think either from both the steps will solve the issue.
Gautam.75801
Similar Messages
-
Issue while deleting a row from a table
Dear friends,
i am getting an issue while deleting a row from a table, pls check screen shots , the first screen shot is my table contents
when i delete 2 row , the second row is deleting properly like below screen shot
but i want like below screen shot , Col1 contents should be like pic 1 . could any one pls let me know how to solve this issue.
Thanks
VijayaHi vijaya,
please try this code, it will help you.
DATA : it_rows TYPE wdr_context_element_set,
wa_rows LIKE LINE OF it_rows.
DATA lo_nd_table TYPE REF TO if_wd_context_node.
DATA lt_table TYPE wd_this->elements_table.
DATA lo_el_table TYPE REF TO if_wd_context_element.
DATA ls_vbap TYPE wd_this->element_table.
DATA: ld_index TYPE i.
data value TYPE sy-index.
* navigate from <CONTEXT> to <table> via lead selection
lo_nd_table= wd_context->get_child_node( name = wd_this->wdctx_table ).
* @TODO handle non existant child
* IF lo_nd_table IS INITIAL.
* ENDIF.
* get element via lead selection
* alternative access via index
* lo_el_table = lo_nd_table->get_element( index = 1 ).
* @TODO handle not set lead selection
IF lo_el_table IS INITIAL.
ENDIF.
* navigate from <CONTEXT> to <table> via lead selection
lo_nd_table = wd_context->get_child_node( name = wd_this->wdctx_table ).
* @TODO handle non existant child
* IF lo_nd_table IS INITIAL.
* ENDIF.
lo_nd_table->get_static_attributes_table( IMPORTING table = lt_table ).
* @TODO handle non existant child
* IF lo_nd_table IS INITIAL.
* ENDIF.
** @TODO compute values
** e.g. call a model function
* navigate from <CONTEXT> to <table> via lead selection
lo_nd_table = wd_context->get_child_node( name = wd_this->wdctx_table ).
* @TODO handle non existant child
* IF lo_nd_table IS INITIAL.
* ENDIF.
** @TODO compute values
** e.g. call a model function
it_rows = lo_nd_table>get_selected_elements( ).
CALL METHOD lo_nd_table->GET_LEAD_SELECTION_INDEX
RECEIVING
INDEX = value .
LOOP AT it_rows INTO wa_rows.
CALL METHOD wa_rows->get_static_attributes
IMPORTING
static_attributes = ls_table.
READ TABLE lt_table INTO ls_table WITH KEY col1 = ls_table-col1.
ld_index = value.
ENDLOOP.
CLEAR : ls_table-col2,
ls_table-col2.
MODIFY lt_table INDEX ld_index FROM ls_table.
lo_nd_table->bind_table( new_items = lt_table set_initial_elements = abap_true ). -
Issue after upgrade the ASA5520 from 7.2.4 to 8.2.5,
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsidi am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid -
How to Upgrade Target Agent from 10.2.0.3 to 10.2.0.4
Hi Everybody,
I am doing this first time so need some help
Q1. I need to Upgrade Target Agent from 10.2.0.3 to 10.2.0.4 manually and can't seem to find the right patch I need.
I tried p3731593, but this seems to be installing much more than what I need so I cancelled it
One option I thought of was to uninstall 10203 agent and install 10204 in the same agent home But I was wondering if there is a way I can upgrade my agent.
Q2. Does the agent version on target and host(OMS) need to be same or can I have Target Agent 10.2.0.4 and host agent 10.2.0.3?
Thanks for helping in advance
JeetHi Jeet,
You can use Patch 3822442 to upgrade the agent.
The agent can be of different version.
Regards
Lai -
I've encountered an issue while printing to A4 from Xerox J75 (fiery) through Mac OSX 10.9.3.
The document and printer settings are set for A4 but the print job goes to the printer as A3.
The problem only occurs while printing through Adobe Photoshop CS6.I get into trouble if I choose A4 borderless instead of A4 in the Photoshop Print settings.
There, Tray 2 is dimmed out
To be honest, I don't see borderless in your settings, but my doing that on my printer causes a default to the larger Tray 1.
That's all I have tonight. If I think of anything else, I'll post it. Here's thread on this issue as well.
Wrong paper size sent to the printer -
I'm trying to upgrade our SCOM 2012 SP1 environment to R2, but I have a heck of a problem getting there.
We currently have an test installation with SCOM 2012 SP1 with Management Server and Console on a single 2012 Standard server. The database are located on a remote server. The R2 setup stopped mid way through the setup, because the SCOM 2012 SP1 agent is
installed. And I could NOT remove it my any normal means. I've tried "misexec.exe /x productcode", the setup, powershell uninstall and so on. Nothing works, because the management server installation is blocking the uninstall. The uninstall says
I have to remove the management installation first. And that's not gonna happen.
I had to follow this guide to finally getting through the setup: http://www.opsman.co.za/forcibly-removing-a-scom-agent-that-cannot-be-uninstalled-by-normal-means/
In addition to searching for the agent msi install key in registry, and deleting everything. After I did this, the setup is working, and the SCOM management server, console and DB are up to date. However, the Microsoft Monitoring Agent are STILL there in
Control Panel. And this can NOT be the most healthy way of getting through the setup.
I'm about to upgrade to R2 in our production environment with 3 management servers, and I would hate to go through this sketchy process there as well. Just for the record, I have no idea why the agents are installed on our management servers.
Any of you have tips as to how I can get rid of the agents more gracefully?Hi
Thanks for the replay guys!
None of those links touch my problem I'm afraid. I have followed the Upgrade guides you pointed to, step by step. But the setup does not Complete. There's problems during the actual software Upgrade of the management servers (3'rd step in the Upgrade page).
I've dived into the Application logs and installation logs, and as far as I can tell, it stops because it has trouble upgrading while the server has the 2012 SP1 Agent installed. I do not remember the actual error text right now, but I can get it in a few
days.
Anyhow, the setup DID move on once I removed most of the registry information of the agent installation. So. that leaves me to the conclusion that the agent IS in fact stopping the setup. Either the agent are malfunctioning, or the setup do not expect the
agent to be present on the management servers. I suspect the latter to be the the most plausible. At least until Yan Li told me this was normal.
So, I'm not sure what to think. I'm pretty much forced to remove this agents, as this is the only thing allowing me to continue the setup. At least untill I'm told otherwise. But I hate to do it this way. It's so dirty. The registry is pretty much cleaned,
but there's still Application files present, and the agent is still in the Control panel and can be started. It's not something I would like to do in our prodution environment. -
Hello Team
I am seeing this issue while I am trying to do an in-place upgrade from SQL Server 2012 to SQL 2014. Both being Enterprise Editions I am still seeing the below error message in the Feature Upgrade checks.
" The specified Edition upgrade is not supported"
Please let me know if anyone else has faced this issue and any workarounds? I am not doing "Edition Upgrade", just wanted to upgrade same edition of 2012 to 2014.
SQL Server details that is being upgrade:
Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64)
May 22 2013 17:10:44
Copyright (c) Microsoft Corporation
Enterprise Edition: Core-based Licensing (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
thanksHi Shanky_621
Thanks for the reply. Yes I was told that it is SQL 2014 Enterprise Edition. Is there a way to verify that? Also yes I did not select the free Evaluation or Express Editions.
Just run the setup you got for SQL server 2014 and you would reach to page where it would say enterprise or standard after that cancel the setup . Actually version number can be found from Mediainfo located in same folder where setup.exe is located but edition
cannot be found by that way.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Hi,
While upgrading the rms dbschema from 13.1.1.1 to RMS 13.1.1.2 we are getting the following error update ALC_FREIGHT_COST table or view doesnt exist.
We have checked the data model of rms 13.1.1 and rms 13.1.2 and we couldnt find the table "ALC_FREIGHT_COST."
So anybody could give suggestions on this.
Appreciate your help
Thanks,
SureshI'd ignore the error for the moment and file an SR with OracleSupport to make them aware of the issue and release a better script - all of this assuming that your 13.1.1 starting point is valid and correctly installed.
Additionally you can locate the SQL upgrade script that is actually trying to do something on the mentioned table, and grasp what it is trying to achieve and how relevant that is for you.
The table exists in our 13.0.3 setup. The release notes of 13.1.0 mention a rework of cost component functionality, so seems like it was deprecated in that release.
Best regards,
Erik -
Hi,
while upgrading Oracle SBP 11.2.0.3.5 - 201303 to 11.2.0.3.9 - 201402V3 facing issue as follows
After finishing command $ORACLE_HOME/MOPatch/mopatch.sh -d -s SAP11203V3P_1402-20009977.ZIP
Link Status:
Link script not executed due to patch installation failures.
Please check the log file
$ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_05_02-15-02-04.log
for details. Resolve the problems. Re-start MOPatch to execute
the link script or execute it manually as
/bin/sh "./link.seskasap011.sh"
there are some failed patched found in the logs
Skipped 2 of 104 patches due to patch conflicts:
SAP11203V3P_1402-20009977.ZIP!17540582!17540582
conflicts with: 11837095 12693573 12918738 13628002 13784384 13906412 13947840 14264364 14309390 14511876 15827841 15878275 15980576 16084707 16210371 16291679 163
57019 16359540
OPatch log file:
$ORACLE_HOME/cfgtoollogs/opatch/opatch2014-05-02_15-03-26PM_1.log
SAP11203V3P_1402-20009977.ZIP!17239632
conflicts with: 12693573
also foung below type of error in the log file
“”Archive Action: Source file "/oracle/GN0/112_64/.patch_storage/14309390_Aug_2_2012_13_50_45/files/lib/libserver11.a/ktfb.o" does not exists.
'oracle.rdbms, 11.2.0.3.0': Cannot update file '/oracle/GN0/112_64/lib/libserver11.a' with '/ktfb.o'
Archive Action: Source file "/oracle/GN0/112_64/.patch_storage/14309390_Aug_2_2012_13_50_45/files/lib/libserver11.a/ktsx.o" does not exists.
'oracle.rdbms, 11.2.0.3.0': Cannot update file '/oracle/GN0/112_64/lib/libserver11.a' with '/ktsx.o'
Archive Action: Source file "/oracle/GN0/112_64/.patch_storage/14309390_Aug_2_2012_13_50_45/files/lib/libserver11.a/tbsdrv.o" does not exists.
'oracle.rdbms, 11.2.0.3.0': Cannot update file '/oracle/GN0/112_64/lib/libserver11.a' with '/tbsdrv.o'””
when i try appling single patch using OPatch, it is not getting applied
Please suggest
Regards,
Narayana
+91 8374424972Hi Janos,
Copy files from another Oracle Software is not a wise idea. Even if this would work, it is an unsupported way. No one could predict what would happen later on.
I said to rsync the file systems not to copy specific files, If you rsync the file system (Oracle_home) it syncs all the binaries without any difference between source and target. It doesn't require uninstallation and re-installation of Oracle.
Deinstalling and reinstalling the Oracle Software is the most easiest and quickest supported way
I did this rsync even on new systems where Oracle was not installed, it worked all the times without any issue.
Never mind - It is just another solution to resolve the issue and not to challenge
Regards,
Nick Loy -
Performance Issues during Upgrade of EBS from 11.5.10.2 to 12.1.1
Hi,
We're upgrading our EBS , from Rel 11.5.10.2 to 12.1.1.
We're stuck , while running script ar120bnk.sql (ran more than 20 Hours) :
Regarding the tables involved in this Process :
select owner , table_name,num_rows,last_analyzed,sample_size
from dba_tables
where table_name in
'RA_CUSTOMER_TRX_ALL',
'RA_CUST_TRX_LINE_GL_DIST_ALL',
'XLA_UPGRADE_DATES',
'AR_SYSTEM_PARAMETERS_ALL',
'RA_CUST_TRX_TYPES_ALL',
'RA_CUST_TRX_LINE_GL_DIST_ALL',
'XLA_TRANSACTION_ENTITIES_UPG')
AR RA_CUSTOMER_TRX_ALL 55,540,740 04/02/2012 12:41:56 5554074
AR RA_CUST_TRX_LINE_GL_DIST_ALL 380,513,830 04/02/2012 13:54:12 38051383
AR RA_CUST_TRX_TYPES_ALL 90 04/02/2012 14:04:54 90
AR AR_SYSTEM_PARAMETERS_ALL 6 04/02/2012 12:19:49 6
XLA XLA_UPGRADE_DATES 4 05/02/2012 17:12:57 4
As you can see: RA_CUST_TRX_LINE_GL_DIST_ALL is more tan 380 million rows !
and RA_CUSTOMER_TRX_ALL is more than 55 million rows.
We have more huge tables in the AR schema , and we would like to know if we are unique customer
with huge AR schema objects , and if NOT how come that we are getting stuck on threed statment in
AR schema.
Bellow an output of all the objects that have more than 10 million rows in AR schema :
select owner , table_name,to_char(num_rows,'999,999,999') ,last_analyzed
from dba_tables
where owner = 'AR'
and num_rows > 10000000
order by num_rows desc nulls last
AR AR_DISTRIBUTIONS_ALL 408,567,520 04/02/2012 11:49:57
AR RA_CUST_TRX_LINE_GL_DIST_ALL 380,513,830 04/02/2012 13:54:12
AR MLOG$_AR_CASH_RECEIPTS_ALL 310,777,690 04/02/2012 12:30:33
AR RA_CUSTOMER_TRX_LINES_ALL 260,211,090 04/02/2012 13:30:26
AR AR_RECEIVABLE_APPLICATIONS_ALL 166,834,930 04/02/2012 12:16:54
AR MLOG$_RA_CUSTOMER_TRX_ALL 150,962,980 04/02/2012 12:33:23
AR AR_CASH_RECEIPT_HISTORY_ALL 145,737,410 04/02/2012 11:40:31
AR RA_CUST_TRX_LINE_SALESREPS_ALL 130,287,580 04/02/2012 14:03:54
AR AR_PAYMENT_SCHEDULES_ALL 108,652,480 04/02/2012 12:05:32
AR RA_CUSTOMER_TRX_ALL 55,540,740 04/02/2012 12:41:56
AR AR_CASH_RECEIPTS_ALL 53,182,340 04/02/2012 11:29:53
AR AR_DOC_SEQUENCE_AUDIT 52,865,150 04/02/2012 11:52:46
AR RA_MC_TRX_LINE_GL_DIST 17,317,730 04/02/2012 14:05:18
AR AR_MC_DISTRIBUTIONS_ALL 13,037,030 04/02/2012 11:53:35
AR AR_MC_RECEIVABLE_APPS 12,672,050 04/02/2012 11:53:57
AR AR_TRX_SUMMARY 12,457,560 04/02/2012 12:20:16
AR RA_CUST_RECEIPT_METHODS 11,105,750 04/02/2012 13:35:38
AR HZ_ORGANIZATION_PROFILES 10,271,640 04/02/2012 12:24:44
How to Upgrade AR tables whith Huge amount of Datas ( > 50 Millions Rows ) ?Hi,
Dont worry, you are not the only one even we have one customer whose AR_DISTRIBUTIONS_ALL table is 80 GB now and i can even do select count(*) for this table.
We had to keep this much data for business requirements, but i wonder if this is a bug or users mistake.
Due to this we are facing seruios performance issues for AR reports and raised SRs but no resolution yet. And this guy who is assigned to us is reall ynot been helpful to fix the issue.
Although we did not upgrade for this customer, but we migrated from 11.5.9 to R12.1.1 by re-implementation. But all these increasing size of these tables happened after migration.
And i believe most of the time in your upgrade is going to building the indexes. You can ask Oracle if they can edit the driver file to skip building the indxes and rebuild them after upgrade. But again it will also take time.
Another option for you is to "Archive and Purge the data" as per chapter 10 of
11i Receivables user guide.
http://docs.oracle.com/cd/B25284_01/current/acrobat/115arug.zip
Thanks
Edited by: EBSDBA on Feb 8, 2012 10:04 PM -
LDAP issue after upgrading to SP15 from SP7 for CUP 5.3
Hello,
We have recently upgraded our Sandbox from SP 7 to SP15 on GRC 5.3 and Now having issues authenticating users using LDAP.
The connections and settings are exactly same as our Dev system which in on SP7 and the connection also says successful but when we go onto the request page and type in an id it says invalid credentials.
Am i missing something or is there a special procedure after upgrade .
Thanks
UdayHello Frank,
Thanks for the reply.I forgot to do it and as you said once i performed those steps it actually solved my password reset link issues as it was erroring out with 500 error and now it is working fine .
But to fix LDAP issue SAP has a note which says after SP13 we don't need to fill in the user path field while creating LDAP connector.
Thanks
Uday -
Error while upgrading SRM portal from 7.01 to 7.02
Hi All,
We are in process of upgrading SRM Java from 7.01 to 7.02. While JSPM was running 250GB of trace files (around 29317 files) have been written under D:\usr\sap\SJ7\JC01\j2ee\cluster\server0 and we are forced to stop JSPM and complete SAP instance.
As soon as we start the instance with minutes 1GB trace files are written. All these files are dev_jrfc_xxxxx.trc.
All these files have single error repeated continuously, kindly let us know how to resolve this issue.
Error file opened at 20110706 102426 Eastern Daylight Time Rel 7.01.3 (2008-10-28) [710.234]
Error thrown [Wed Jul 06
10:26:12,128]:Error in RequestDispatcher.DispatcherWorker.run() java.lang.UnsatisfiedLinkError: nativeSAP_CMLISTEN
at com.sap.mw.rfc.driver.CpicDriver.nativeSAP_CMLISTEN(Native Method)
at com.sap.mw.rfc.driver.CpicDriver.SAP_CMLISTEN(CpicDriver.java:1137)
at com.sap.mw.rfc.driver.RfcTypeRegisterCpic.waitForRequest(RfcTypeRegisterCpic.java:593)
at com.sap.mw.rfc.api.RfcApi.RfcWaitForCpicRequest(RfcApi.java:1262)
at com.sap.mw.jco.MiddlewareJRfc.waitForRequest(MiddlewareJRfc.java:641)
at com.sap.mw.jco.RequestDispatcher$DispatcherWorker.run(RequestDispatcher.java:159)
at java.lang.Thread.run(Thread.java:534)
Regards,
Siva.Hi Siva,
it seems to me that you have heavy log archiving on the system. You can switch the log severity of all (or at least most) of the locations to the default. In addition, switch off the archiving of old log files:
In the visual configtool navigate to Server -> Services -> Log Configurator -> Properties tab and set the value of the ArchiveOldLogFiles to "OFF".
Also, using the Visual Administrator -> Services -> Log Configurator -> restore to default all the trace levels.
Regards,
Jonas Cella -
Issues after upgrading the Obiee from 10g to 11g
Hi all,
We have recently upgraded our rpd from 10g to 11g. And a part of Webcatlog is being upgraded. We observe issues with the upgraded reports.
As the for the report prompts the script was taking lot of time. And the browser pop's a message either to 'stop' or 'continue'.
The report is taking lot of time to run than the usual 10g environment. And the path BP1 is also applied for the 11g environment.
Please suggest a troubleshoot method to overcome the issues with the upgraded reports.
Thank you,
Chris.Check this pdf file
http://www.rittmanmead.com/files/biforum2012/ranka_performance.pdf
If helps pls mark -
Issue while upgrading weblogic portal 8.1 to 9.2
Hi All,
I am upgrading my weblogic portal 8.1 application to 9.2. While following the process give at following link.
http://download.oracle.com/docs/cd/E13214_01/wli/docs92/upgradetutorial/chap2.html
I am getting following error in the update tab. Any suggestion would be greatful.
weblogic.DDConverter failed to convert the EAR, weblogic-application.xml will not be
upgraded :
[DDConverter] START Converting EAR BEA[DDConverter] START Converting EJB-JAR
.workshop/<App_name>/EJB/GenericStateless[DDConverter] END Converting EJB-JAR
.workshop/<App_name>/EJB/GenericStateless[DDConverter] START Converting EJB-JAR
content.jar[DDConverter] END Converting EJB-JAR content.jar[DDConverter] START Converting
EJB-JAR content_repo.jar[DDConverter] END Converting EJB-JAR content_repo.jar[DDConverter]
START Converting EJB-JAR netuix.jar[DDConverter] END Converting EJB-JAR
netuix.jar[DDConverter] START Converting EJB-JAR p13n_ejb.jar[DDConverter] END Converting
EJB-JAR p13n_ejb.jar[DDConverter] START Converting EJB-JAR prefs.jar[DDConverter] END
Converting EJB-JAR prefs.jar[DDConverter] START Converting EJB-JAR wps.jar[DDConverter] END
Converting EJB-JAR wps.jar[DDConverter] START Converting EJB-JAR
.workshop/<App_name>/EJB/ProjectBeans[DDConverter] END Converting EJB-JAR
.workshop/<App_name>/EJB/ProjectBeans[DDConverter] START Converting WAR
adminPortal.war[DDConverter] END Converting WAR adminPortal.war[DDConverter] START
Converting WAR datasync.war<May 4, 2010 5:16:20 PM PDT> <Info> <J2EE> <BEA-160192> <While
upgrading weblogic.xml, encountered "debug" param "jsp-param". This param is unknown and
will be removed> [DDConverter] END Converting WAR datasync.war[DDConverter] START Converting
WAR wps-toolSupport.war[DDConverter] END Converting WAR wps-toolSupport.war[DDConverter]
START Converting WAR <App_name><May 4, 2010 5:16:20 PM PDT> <Error> <J2EE> <BEA-160197>
<Unable to load descriptor
weblogic.application.ddconvert.ConvertCtx$VJarResourceLoader@b16f5f finder:
weblogic.utils.classloaders.CodeGenClassFinder@106def2 annotation: /WEB-INF/web.xml of
module null. The error is weblogic.descriptor.DescriptorException: Unmarshaller failed at
weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:147
) at
weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280) at
weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248) at
weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(Abstra
ctDescriptorLoader2.java:749) at
weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescr
iptorLoader2.java:376) at
weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(Abst
ractDescriptorLoader2.java:720) at
weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescrip
torLoader2.java:729) at
weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134) at
weblogic.application.ddconvert.WarConverter.convertDDs(WarConverter.java:60) at
weblogic.application.ddconvert.EarConverter.convertModules(EarConverter.java:125) at
weblogic.application.ddconvert.EarConverter.convertDDs(EarConverter.java:84) at
weblogic.application.ddconvert.DDConverter.runBody(DDConverter.java:157) at
weblogic.utils.compiler.Tool.run(Tool.java:158) at
weblogic.utils.compiler.Tool.run(Tool.java:115) at
weblogic.application.ddconvert.DDConverter.main(DDConverter.java:177) at
weblogic.DDConverter.main(DDConverter.java:10)Caused by: com.bea.xml.XmlException:
weblogic.descriptor.BeanAlreadyExistsException: Bean already exists:
"weblogic.j2ee.descriptor.ListenerBeanImpl@788e8862(/Listeners[com.bea.wlw.runtime.core.serv
let.WebappContextListener])" at
com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:54)
at
com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindin
gType.java:483) at
com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollecti
on(AttributeRuntimeBindingType.java:385) at
com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
at
com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(At
tributeRuntimeBindingType.java:145) at
com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:185
) at
com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)
at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65) at
weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136
) ... 15 moreCaused by: weblogic.descriptor.BeanAlreadyExistsException: Bean already
exists:
"weblogic.j2ee.descriptor.ListenerBeanImpl@788e8862(/Listeners[com.bea.wlw.runtime.core.serv
let.WebappContextListener])" at
weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:207) at
weblogic.j2ee.descriptor.WebAppBeanImpl.setListeners(WebAppBeanImpl.java:965) at
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at
java.lang.reflect.Method.invoke(Method.java:585) at
com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)
... 23 more.> weblogic.application.ddconvert.DDConvertException:
weblogic.descriptor.DescriptorException: Unmarshaller failed at
weblogic.application.ddconvert.WarConverter.convertDDs(WarConverter.java:79) at
weblogic.application.ddconvert.EarConverter.convertModules(EarConverter.java:125) at
weblogic.application.ddconvert.EarConverter.convertDDs(EarConverter.java:84) at
weblogic.application.ddconvert.DDConverter.runBody(DDConverter.java:157) at
weblogic.utils.compiler.Tool.run(Tool.java:158) at
weblogic.utils.compiler.Tool.run(Tool.java:115) at
weblogic.application.ddconvert.DDConverter.main(DDConverter.java:177) at
weblogic.DDConverter.main(DDConverter.java:10)Caused by:
weblogic.descriptor.DescriptorException: Unmarshaller failed at
weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:147
) at
weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280) at
weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248) at
weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(Abstra
ctDescriptorLoader2.java:749) at
weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescr
iptorLoader2.java:376) at
weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(Abst
ractDescriptorLoader2.java:720) at
weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescrip
torLoader2.java:729) at
weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134) at
weblogic.application.ddconvert.WarConverter.convertDDs(WarConverter.java:60) ... 7
moreCaused by: com.bea.xml.XmlException: weblogic.descriptor.BeanAlreadyExistsException:
Bean already exists:
"weblogic.j2ee.descriptor.ListenerBeanImpl@788e8862(/Listeners[com.bea.wlw.runtime.core.serv
let.WebappContextListener])" at
com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:54)
at
com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindin
gType.java:483) at
com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollecti
on(AttributeRuntimeBindingType.java:385) at
com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
at
com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(At
tributeRuntimeBindingType.java:145) at
com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:185
) at
com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)
at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65) at
weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136
) ... 15 moreCaused by: weblogic.descriptor.BeanAlreadyExistsException: Bean already
exists:
"weblogic.j2ee.descriptor.ListenerBeanImpl@788e8862(/Listeners[com.bea.wlw.runtime.core.serv
let.WebappContextListener])" at
weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:207) at
weblogic.j2ee.descriptor.WebAppBeanImpl.setListeners(WebAppBeanImpl.java:965) at
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at
java.lang.reflect.Method.invoke(Method.java:585) at
com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)
... 23 moreweblogic.descriptor.DescriptorException: Unmarshaller failed
Thanks in advance.
Regards,
Sandeep KHi,
Upgrade report is giving me following warning. Is my above problem is due to this warning?
The project <Application Name> references netui-pageflow.jar, which contains an 8.1 WLS XMLBean, com.bea.wlw.netui.pageflow.schema.webapp23.EjbLinkDocument. Regenerate the JAR to use Apache XMLBeans.
If yes then how to resolve this issue. Any suggestion guys.
Thanks in advance.
Regards,
SandeepK -
Hi All,
I am in process of doing 10g AS integration with 11.5.10.2.
As per documentation i have seen that 10g AS has to upgrade
My 10g AS version is 10.1.2.0.2
and my database version is 10.1.0.4.2
I have downloaded patch p5983622_10123_LINUX.zip
and first tried to upgrade infrastructure home
but while upgrading it says
oracle universal installer has detected that your database is version 10.1.0.4.2 before you can continue you must apply a required database patch set.
But in documentation i have seen
Supported Database Releases
The portal schema may be residing in an OracleAS Metadata Repository, or in a customer database. The database in which the portal schema resides must be one of the following supported releases:
Oracle Database 10g (10.1.0.4.2) or later
Please let me know what should i do now
Thanks in advance
Regards,
Bhanu Chander.Hi ,
$ORACLE_HOME/j2ee/OC4J_Portal/application-deployments/portal/OC4J_Portal_default_island_1/application.log
09/09/24 06:24:21 portal: Max URL _debug value '1'.
09/09/24 06:36:33 portal: [module=PortalServletContextListener, thread=Shutdown] Portal Servlet Context Listener destroy started
09/09/24 06:36:33 portal: [module=PortalServletContextListener, thread=Shutdown] Repository Service destroy started
09/09/24 06:36:33 portal: [module=PortalServletContextListener, thread=Shutdown] Repository Service Config destroy started
09/09/24 06:36:33 portal: [module=PortalServletContextListener, thread=Shutdown] Repository Service Config destroy finished, 0 ms
09/09/24 06:36:34 portal: [module=PortalServletContextListener, thread=Shutdown] Repository Service destroy finished, 1003ms
09/09/24 06:36:34 portal: [module=PortalServletContextListener, thread=Shutdown] Portal Servlet Context Listener destroy finished, 1004ms
09/09/24 06:36:34 portal: Page Servlet destroy started at 1253788594974 millis
09/09/24 06:36:34 portal: Page Servlet destroy ended at 1253788594977 millis, duration was 3 millis
09/09/24 06:36:34 portal: [module=RepositoryServlet, thread=Shutdown] Repository Servlet destroy started
09/09/24 06:36:34 portal: RepositoryServlet: destroy
09/09/24 06:36:34 portal: [module=RepositoryServlet, thread=Shutdown] Repository Servlet destroy finished, 0ms
09/09/24 06:36:34 portal: [module=PortalServlet, thread=Shutdown] Portal Servlet destroy started
09/09/24 06:36:34 portal: PortalServlet: destroy
09/09/24 06:36:34 portal: [module=PortalServlet, thread=Shutdown] Portal Servlet destroy finished, 0ms
09/09/24 06:36:34 portal: Stopped
09/09/24 06:36:34 Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (localhost.localdomain))
09/09/24 08:35:53 Started
09/09/24 08:36:13 portal: ServletLogger - Logging level: 2
09/09/24 08:36:13 portal: [module=PortalServletContextListener, thread=Orion Launcher] Initializing Portal Servlet Context Listener
09/09/24 08:36:13 portal: jsp: init
09/09/24 08:36:13 portal: Started
09/09/24 08:38:37 portal: PortalServlet: init
09/09/24 08:38:37 portal: ServletLogger - Logging level: 2
09/09/24 08:38:37 portal: [module=PortalServlet, thread=AJPRequestHandler-ApplicationServerThread-5] Initializing Servlet: PortalServlet
09/09/24 08:38:38 portal: RepositoryServlet: init
09/09/24 08:38:38 portal: ServletLogger - Logging level: 2
09/09/24 08:38:38 portal: [module=RepositoryServlet, thread=AJPRequestHandler-ApplicationServerThread-5] Initializing Servlet: RepositoryServlet
09/09/24 08:38:39 portal: page: init
09/09/24 08:38:39 portal: Cache: Cache is enabled.
09/09/24 08:38:39 portal: Pool: Initialized with the following pools : [oracle.webdb.pool.http.HTTPConnectionKey]
09/09/24 08:38:39 portal: Created mobileXML to HTML stylesheet object
09/09/24 08:38:39 portal: PPE version : 10.1.2.0.2 (11082005)
09/09/24 08:38:39 portal: Tuning parameter values : poolSize(Fetchers)=25[default=25] : minTimeout(MinTimeout)=5s[default=5s] : requesttime(DefaultTimeout)=15s[default=15s] : stall(MaxTimeout)=65s[default=65s] : queueTimeout(QueueTimeout)=10s[default=10s] maxParallelPortlets=20[default=20] maxParallelPagePortlets=10[default=10]
09/09/24 08:38:39 portal: Max URL _debug value '1'.
what do you see when you get the error on trying to login.
Same error
An error occurred while processing the request. Try refreshing your browser. If the problem persists contact the site administrator
Maybe you are looking for
-
Apple TV keeps restarting/rebooting in an almost endless loop
So this is the second ATV I have setup in the last two weeks. All iTunes/Mac OS software is up to date. ATV comes installed with 2.4. I have been able to set it up, stream, sync, control with Remote, etc. However this time the problem occurred about
-
How To Get The Total Delivered Quantity of a Sales Order
Hello All, I have a requirement of getting the total delivery quantity of the sales order .I have checked it in LIps table but I am getting partially delivered quantity for a schedule line item.Can any one tell me how to get the total delivered quant
-
Java 5 Hotspot VM crash on Windows 2000 Server, 2000 Pro and XP pro
Hello, We have had the following recurring error on different machines with Java 5, running one of our mission critical systems. It seems to be a problem connected with AWT and "SafepointBlob" whatever that is. Has anybody seen this kind of thing bef
-
[SOLVED] Problem with running GUI apps as root
Hi, I have a serious problem with running any kind of software having GUI as root, which is indispensable for editing system files. For example I want to edit /etc/pacman.conf file with KWrite, and here's what I get [zbyszek@barca ~]$ xhost + access
-
my hp Pavilion dv7-4157cl turns on but has no display. monitor is completely black. I connected an external monitor and still no display. This question was solved. View Solution.