SCOM - Monitors for Management Packs

Hi All,
Can any one share the information how we can get the list of monitors in a management pack in SCOM 2012 R2.
The SCOM 2007 R2 cmdlet doesn't work in SCOM 2012 R2.
Rgs,

Hi
there is no option to pull threshold for monitors/rules, as each rule/monitor has different schema of workflow.
you can use mp viewer to see threshold for monitor/rule and make a note of threshold as it is one time activity( you no need to apply mp viewer on library and discovery mp in general for Microsoft MP) and you can apply override explorer to get override values
for monitor/rules this gives current effective threshold.
refer below link for scom 2012 tools.
http://blogs.msdn.com/b/dmuscett/archive/2012/02/19/boris-s-tools-updated.aspx
regards
sridhar v

Similar Messages

SCOM 2012 R2 Management Packs for monitoring IBM Tivoli

Are there management packs available to monitor IBM Tivoli through SCOM 2012 R2?
If yes, what all components in IBM Tivoli family can be monitored?
Thanks in advance

Hi,
I think if there is any Management Pack for IBM Tivoli, then this Management Pack should be provided by IBM, and this may be fee-based also, I would like to suggest you contact IBM for this.
And hope the below link be helpful:
http://unofficialsystemcentercatalog.wordpress.com/2012/12/27/operations-manager-is-there-a-management-pack-for/
Regards,
Yan Li
Regards, Yan Li

SCOM 2012 R2 Management Pack for Fortinet

Is there any management pack to monitor fortinet for scom 2012 R2

Hi Syed,
As well, you can try to monitor your Fortinet with SNMP traps:
http://stefanroth.net/2014/04/07/scom-2012-snmp-traps-how-the-heck-do-i-get-it-working/
http://docs-legacy.fortinet.com/cb/html/index.html#page/FOS_Cookbook/Install_advanced/snmp_setup.html
Natalya
### If my post helped you, please take a moment to Vote as Helpful and\or Mark as an Answer

How to get monitor threshods for Management Packs

Hello,
I'm not administering SCOM but I need to get all information relating to monitoring, and more specifically, thresholds information.
I've run the PS scripts I've found in several forum discussions such us:
http://technet.microsoft.com/en-us/library/cc974480.aspx
http://blogs.msdn.com/b/boris_yanushpolsky/archive/2007/08/07/so-what-thresholds-do-my-monitors-have.aspx
http://blogs.technet.com/b/jonathanalmquist/archive/2010/03/15/export-unit-monitors-including-thresholds.aspx
http://blog.theinfraguys.com/2012/02/retrieving-scom-monitor-thresholds-by.html
I all the cases the script returns an empty value for the threshold field. Has anybody tried those scripts before?
I can see alerts in the Operations Console like this:
Available megabytes of memory is too low: "The threshold for the Memory\Available MBytes performance counter has been exceeded. The value that exceeded the threshold is: 495."
But, how could I get all defined thresholds?
Thanks in advance.
Marta M.

Hi,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Niki Han
TechNet Community Support

Service monitoring is not showing all the services when i create a service monitor under Management pack templates.

Hi All,
I am using SCOM 2007 R2 CU4 in my environment. I want to do a service monitoring on specific agents. When i try creating this service monitor which comes under the Management pack template when i select the service which i want to monitor it does not
show all the services in the drop down.
For example - I have Windows audio service which is present on the machine, But it is not showing in the service list.
So from the services stating from "W" i see only 5 in SCOM and in services.msc in the Agent i see more than 5.
Below is the screen shot.
Can any one please help.
Gautam.75801

Hi Yan Li,
So based on your above suggestion, If the services are already managed / monitored by a specific
management pack those services will not appear here in the Wizard while creating this type of a Management pack object alert right ?
If that is the case why does not the same reflect here in the operations console in the Services monitor
TAB ?
Gautam.75801

SCOM Monitoring for Azure and its Licensing

Hi All,
In a hybrid environment , If i have my scom management group set up on-premise and want to monitor boxes from AZURE , does this require additional licensing to monitor boxes in Azure? If Yes can anyone help me with the information.
Regards,
Hemanshu Kadam

Hi,
To monitor Azure, here is an article for your reference:
Walkthrough to Configure System Center Management Pack for Windows Azure Fabric Preview for SCOM 2012 SP1 (with a MetricsHub Bonus)
http://blogs.msdn.com/b/walterm/archive/2013/04/13/first-impressions-on-system-center-management-pack-for-windows-azure-fabric-preview-for-scom-2012-sp1.aspx
Regards,
Yan Li
Regards, Yan Li

Reporting Looking for Management Packs

Hello,
I am running SCOM 2012 R2 UR4. I wanted to setup a scheduled report to show me a list of computers in a critical health state. But when I go to the Reporting tab, it is asking me to import management packs. Which MP's do I need for Reporting?

I got this issue once. I had installed SCOM reporting components but the reports were not showing up.
If you disable the Windows Firewall on reporting server, reports will populate in the SCOM operations console. Another way is by creating a new inbound rule on the Reporting server, allowing communication for TCP port # 80 and 443. see if that helps.
A related post -
https://social.technet.microsoft.com/Forums/ie/en-US/722a67ef-8026-460f-9d9d-f8762baca411/all-of-a-sudden-report-doesnt-work-anymore?forum=operationsmanagergeneral
Thanks, S K Agrawal

SCOM 2012 UCS Management Pack Configuration/Administrator Guide

Hi,
We are planning to use SCOm 2012 for UCS Monitoring and Reporting purpose. Is there any detail configuration/Administrator Guide available?
Is there any best practice document availble to monitor critical ports( Network uplink/Storagre Uplink) ports and and setting up threshold limit?
Thanks in adavance for your help..

Hi Hetal,
Please take a look at this guide for starters:
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/msft_tools/scom/scom_2.6/scom_2.6_user_guide/scom_2_6_monitoring.html
Thanks,
-Bruce

SCOM Management pack for Checkpoint Firewall & Fortigate UTM

HI ,
Any body knows that is there Management pack for Checkpoint ( <cite>www.checkpoint.com ) </cite>and
Fortigate Appliance ( http://www.fortinet.com/products/fortigate/index.html ).
please advise me.
Regards, COMDINI

Hi,
If you cannot find them in system center marketplace:
http://systemcenter.pinpoint.microsoft.com/en-US/home
you can contact the vendors for management pack.
Alex Zhao
TechNet Community Support

Office 365 Management Pack - SCOM 2007

Hi All,
Can anyone please point me to an official link on SCOM 2007 R2 Management Pack for
Office 365. Just wondering if the below link is the right one which I am reffering to
http://www.systemcentercentral.com/scom-monitoring-office-365/
Also, the one which is available for download in "Microsoft Download center" (http://www.microsoft.com/en-ca/download/details.aspx?id=43708)
is designed for SCOM 2012 family, not for SCOM 2007 R2
Appreciate your help...
Faizan

Although this MP is not the official document on monitoring Office 365 using SCOM 2007 R2, it original came from
http://blogs.technet.com/b/momteam/archive/2011/07/29/monitoring-office-365-using-operations-manager.aspx which has a higher reputation and reliable source for Microsoft solution. At last, it is high recommend that you should test it on your testing
environment before roll out to production environment.
Roger

Looking for a SQL query to get all the possible Alert Messages from the Rules in a Management Pack

For reporting, I'm looking to get a SQL query of all the possible Alert Messages for Rules configured in a Management Pack (not necessarily the ones that have thrown alerts). I can do this for Monitors, but not for Rules.
The configured alert messages for the Management Pack Monitors
go like this: ManagementPack > MonitorView> RuleModule > RuleModule.Alert Message > Localized Text
The configured alert messages for the Management Pack Rules
should go something like this, but there is a missing link: ManagementPack > RuleView > RuleModule > ? Missing Link ? > Localized Text
The Rules are tied to the Module, but I don't see a connection from the RulesModule to the Alert Message that I see in the LocalizedText. The Rule names do not always equal the Alert name.
Can someone provide the missing link?

Hi,
please try below powershell code to find the corresponding management pack for specific alert:
$Alert = get-scomalert | where {$_.Name -like 'Agent Proxy Not Enabled*'} | select -first 1
If ($alert.IsMonitorAlert -eq "True") {
write-host "Ths is a monitor-generated alert"
get-scommonitor -ID $Alert.MonitoringRuleID | select Enabled, DisplayName, ManagementPack
else
write-host "This is a rule-generated alert"
get-scomrule -ID $Alert.MonitoringRuleID | select Enabled, DisplayName, ManagementPack
In addition, please also refer to the below link:
http://blogs.technet.com/b/mazenahmed/archive/2011/12/02/using-powershell-to-map-opsmgr-active-alert-to-its-corresponding-rule-monitor-and-management-pack-name.aspx
Regards,
Yan Li
Regards, Yan Li

Not discoverd cloud services in scom monitoring console

win2008r2-SCOM2012R2
We have imported the Azure Management packs in to SCOM and Added the Subscription successfully.
But, the Azure resource inventory Not Discovered Cloud Services, Discovered Storage, Discovered Virtual Machines.
N R Raju

Hi,
Have you added Windows Azure subscription to operations manager? And we may need to set up Windows Azure monitoring with management pack templates and create views for Azure.
Please follow the article below to configure Azure monitoring:
Monitoring Windows Azure with System Center Operations Manager 2012 – GET ME STARTED
http://blogs.technet.com/b/cbernier/archive/2013/10/23/monitoring-windows-azure-with-system-center-operations-manager-2012-get-me-started.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Advisor failed to import the latest advisor knowledge management packs

Hello All facing this issue from couple of days, troubleshooted from every perspective but haven't got any successful result...
Event Description: Failed to import the latest Advisor Management Packs to the Management Server.
Reason: System.ArgumentException: The requested management pack is not valid. See inner exception for details.
Parameter name: managementPack ---> Microsoft.EnterpriseManagement.Common.ManagementPackException: Verification failed with 1 errors:
Error 1:
Found error in 2|Microsoft.IntelligencePacks.OfflineUpdate|7.0.9401.0|Microsoft.IntelligencePacks.OfflineUpdate|| with message:
Could not load management pack [ID=Microsoft.IntelligencePacks.Types, KeyToken=31bf3856ad364e35, Version=7.0.9401.0]. The management pack was not found in the store.
: Version mismatch. The management pack ([Microsoft.IntelligencePacks.Types, 31bf3856ad364e35, 7.0.9366.0]) requested from the database was version 7.0.9401.0 but the actual version available is 7.0.9366.0.
Summary
The latest Management Packs for the Advisor connector have not been imported to the management server database.
Causes
Management Pack Update Failed (55032,55008), Management pack Update SCOM Error(55031), Management Pack Update Import Failed (55006)
Resolutions
Refer to the Operations Manager event log on the management server for more information
NOTE:
Proxy settings are configured on server as well as on console...
REGARDS DANISH DANIE

Hi,
According to the error message, "The management pack ([Microsoft.IntelligencePacks.Types, 31bf3856ad364e35, 7.0.9366.0]) requested from the database was version 7.0.9401.0 but the actual version available is 7.0.9366.0."
We may need to check the management pack's version.
Have you applied the SC advisor connector?
System Center Advisor Connector for Operations Manager
http://www.microsoft.com/en-us/download/details.aspx?id=38199
Regards, Yan Li

Monitoring for a collected file

Hi there folks
I have a need to use SCORCH to perform some automation based upon a file. Essentially this is what I wish to do
- Write a text file to a share on an SCCM client. There will in fact be a number of SCCM clients
- The folder is monitored for file collection
- The file will be transferred to SCCM Site Server
- I want SCORCH to be able to look into SCCM for a number of known SCCM clients to identify that a new file has been collected, read the filename and then start processing the file. Ideally I'd then like to have SCORCH delete that file.
It's that last stage which is causing me some concern as I cannot see how to programmatically get into File Collection and extract the text file. Is there a script which we can access on this at all?

Hi Torsten
OK, it's a bit complicated but I have a branch office like scenario but each is an untrusted forest. I have a server down on the branch which is an MP, SUP, DP and SCCM client and it manages a bunch of SCCM clients down in the branch. This server
also functions as a SCOM gateway for managing the infrastructure boxes.
Down in the branches however I have a bunch of boxes which cannot have an SCCM client installed on them (even with the new clients) which from a central location need to have jobs run on them.
At head office I have a package for each Branch and I write a job file for a system in the form SYSID-TicketID.JOB where SYSID is the name of the system and ticket ID is what Remedy built. The .JOB file goes into the package and the package content
is refreshed. The .JOB file finds it way down through SCCM and eventually arrives at the branch and is copied to the share. At the branch, systems will look in the share and see that there is .JOB file for them. They will do something at
this stage.
When the system is performing its stuff it will write to a share on the SCCM client called BACKCHANNEL a file called SYSID-TicketID.LOG. Through file collection SCCM delivers this file back to the SCCM server.
Now, we need SCORCH to be able to look into SCCM for any collected files and then extract them, adding the .LOG file to the ticket in Remedy. When this is done we want SCORCH to be able to remove the .LOG file from SCCM and then to remove the .JOB
file from the package source. The next time a new .JOB file is created there and the content refreshed the old .JOB will be removed from the DP and the new .JOB sent down.
Yes, it is complicated in a way

Error showing while adding a management pack to 2007R2 authoring console

Hi Every one,
While trying to add an unsealed management pack to 2007 authoring console we are getting error
XSD Verification failed for management pack[line: 1, "color:#222222;font-family:arial,sans-serif;font-size:13px;line-height:normal;">
system.xml.schema.xmlschemavalidationException:The schemaversion atribute is not declared
any help will be thank full
Regards,
Nikhil

The Authoring Console has not been updated and does not understand the OpsMgr 2007R2 MP Schema version. It can still be used to produce MP that will work on OpsMgr 2007 R2, but you need to reference the old versions of the libraries.
You can check this link , it will help you in your issue
http://blogs.inframon.com/post/2012/06/12/Choosing-the-correct-Management-Pack-Solution-with-Visual-Studio-Authoring-Extensions.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

SCOM - Monitors for Management Packs

Similar Messages

Maybe you are looking for