SCOM must required to configure IIS MP and NLB MP ?

Environment
Currently I am trying to monitor application health under the Windows NLB environment. For this I have found the below MICROSOFT link:
http://www.microsoft.com/en-us/download/details.aspx?id=9815&751be11f-ede8-5a0c-058c-2ee190a24fa6=True
The above mentioned MICROSOFT link states that it is possible to monitor the following:
The IIS MP provides monitoring of the following objects:
Web Sites
Application Pools
FTP Servers
NNTP Servers
SMTP Servers
So finally my problem is resolved. But I have a query:
QUERY
Is it must to have SCOM in the environment or we can configure the IIS MP to monitor the health of Web Sites and Application Pool without SCOM ?
Any comment will be appreciated. Thanks. Zahid Haseeb.

Hi,
MP is Management Pack and it is the component of SCOM. Therefore, you need to deploy SCOM in your environment to use MP.
Using Management Packs
http://technet.microsoft.com/en-us/library/hh212709.aspx
If you have question about MP and SCOM, it is recommended to post in SCOM forums.
http://social.technet.microsoft.com/Forums/en-us/home?category=systemcenteroperationsmanager&filter=alltypes&sort=lastpostdesc
Best Regards.
Jeremy Wu
TechNet Community Support

Similar Messages

Required account rights for Alert and Performance/Topology collection and operations SDK

Hi,
My question is with regards to required user role privileges for performing certain operations using Operations Manager 2007 R2 SDK.
- Registering an internal connector to MS SCOM for alert subscription:
http://msdn.microsoft.com/en-us/library/bb437580.aspx
- Collection and acknowledging (or closing) of alerts
http://msdn.microsoft.com/en-us/library/bb424130.aspx
http://msdn.microsoft.com/en-us/library/hh327168.aspx
Based on experience and this article (http://technet.microsoft.com/en-us/library/hh212758.aspx) on how to configure a product connector subscription I'm guessing
that user account needs to have Operations Manager Administrators user role privileges, however I was unable to find this documented in context of SDK.
Are requirements the same for GetMonitoringPerformanceData and GetConfigurationGroups methods?
http://msdn.microsoft.com/en-us/library/microsoft.enterprisemanagement.monitoring.monitoringperformancedatareader.getmonitoringperformancedata.aspx
http://msdn.microsoft.com/en-us/library/dd848560.aspx
Thank you and kind regards,
Zsolt

Hi,
As far as I know, to close an alert the user should be at least an Operator role. Please refer to the below article to get more information about SCOM user role profiles:
Operations Associated with User Role Profiles
http://technet.microsoft.com/en-us/library/hh872885.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

How to configure IIS webserver with weblogic so that I can invoke servlets without the .wlforward extension

How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter and .wlforward
has also been
included as a special file type. However this requires me to key-in ".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

I am able to invoke the servlet without the wlforward extension now.
However, now I am required to add /weblogic before the servlet
name otherwise it does not execute the pathtrim property.
I have tried with the pathprepend thing also.
Can we get rid of the /weblogic part also. I just want to execute
my servlet as http://iis/myServlet.
Your help in this regard is greatly appreciated...
Thanks..
"Rishi" <[email protected]> wrote:
>
Thanks for the reply Kumar.
I did follow the instructions as given in the Weblogic documentation
The documentation said to add iisforward.dll as a filter service
and register .wlforward as a special
file type to be handled by iisproxy.dll. For this,
while configuring the IIS server in the Home Directory tab
I added an extension ".wlforward" and the executable as
iisproxy.dll. Is this the way it should have been done...
I also modified the iisproxy.ini file as per the documentation.
I have added the WLForwardPath property and set it to /weblogic.
My server works fine when I give the url as
http://iis/myServlet.wlforward
but it does not work for
http://iis/myServlet and this is the way i'd want it to work.
Please tell me if I am missing something on the configuration part
and if there is something special that needs to be done. I shall
be grateful to you.
Kumar Allamraju <[email protected]> wrote:
http://e-docs.bea.com/wls/docs61/adminguide/isapi.html#101184
Rishi wrote:
How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter
and
.wlforward
has also been
included as a special file type. However this requires me to key-in".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

How to configure a shell and tube heat exchanger with Lab VIew to get data

HiI
In our undergraduate chemical engineering labboratory we want to configure our shell and tube heat exchanger with a DAq and Lab VIEW to get information about the temperaure (of the cold fluid stream being heated), the pressure (of the steam on the shell side of the heat exchanger) and the flowrate (of the water being heated).
Can anyone suggest thermocouples, pressure transducers and flowmeters to fit between the heat exchanger and the DAq?
P.S. the heat exchanger is already fitted with thermometers, a pressure gauge and a rotameter but we don't know how to connect these hardware to the DAq
Solved!
Go to Solution.

It sounds like you have enough information to pick out appropriate sensors, you just need to do the research. I would start looking through the Omega catalog, or give them a call - they're usually helpful. I can't take the time to spec out parts for you - that would be a lot of time spent on someone else's project. Most pressure sensors put out either a 4-20mA or 0-5V signal, either of which you can read through an analog input on a DAQ; measuring a 4-20mA signal requires a resistor to convert to voltage. Most of the NI DAQ boards can read a thermocouple on an analog input, but make sure that your hardware does support reading thermocouples. For accurate readings, use a device that has built-in cold junction compensation - for example, the SCB-68 connector block - and for the most accurate readings, get a board specifically designed for temperature measurement.
For the flow measurement, a standard, simple solution is an orifice plate. You put a differential pressure transducer across it, look up the appropriate equations, and use them to calculate the flow rate given the density of the fluid (which you'll be able to calculate from the pressure and temperature, since steam tables are widely available). There are other differential pressure devices available as well - at a previous job we used a V-Cone from McCrometer. If you call them they'll spec one for you - but get an approximate cost first to make sure it's within your budget.

What are the permissions required for configuring Streams in 10g

Hi All,
Is admin privileges required for configuring Oracle Streams in 10g. Please confirm.
Thanks,
Redro

What admin privilege are you referring to? There are many admin privs in the Oracle database.
What is absolutely required is reading the docs. Did you do so?
They are at http://tahiti.oracle.com
and they explain it all quite clearly.
There are also working demos here:
http://www.morganslibrary.org/library.html
Find anything with the keyword "Streams"

How to configure the runtime and consolidation for a track in CMS.

How to configure the runtime and consolidation for a track in CMS.
I can see the track exists in CMS but the same doesnt pull up in the NWDS in the development configuration perspective.
I compared the given track with the one which gets pulled up in NWDS. Theres something called runtime system and consolidation which isnt defined for the track which is invisible.
Please advise , what are these required for. And how can we configure the same.

The runtime systems are defined for a track to setup the Transport path for any code changes....the Consolidation system is usually defined as a Virtual system for the track and used for comparison and fixing any broken or Dirty DC's ....that means it's not used as a Runtime System for Deployment as compared to DEV,QAT and PROD used for Deployment...
Hope it helps..
Regards,
Shikhil

Column value ' ' too long - must stop', probably configuration error

Hi Experts,
I have a Proxy to File Scenario when I execute it I get this error in RWB. Can you please help me on this:
Message processing failed. Cause: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value ' ' too long - must stop', probably configuration error in file adapter (XML parser error)''; nested exception caused by: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value ' ' too long - must stop', probably configuration error in file adapter (XML parser error)'
Thanks
Srikanth E

Hi,
if there is any empty tag coming from source then target structure tag will not be created and because of which ur payload structure and FCC configuration is not matching.
To use map with default between source and target strcture so in case source tag dont have value target structure will be created because of mapwithdegfault fuction and ur FCC will not fail.
Open SXMB_MONI output payload and compare the structre with Data type u will se for no source value target tag is not created at all and FCC is failed.
please refer below thread,
0 byte txt file using receiver File Adapter
regards,
ganesh.

BPM 10g: configuration name [ ProjectName ] and type [SQL] is not defined.

Hi There,
I try to help a colleague with his BPM10g project. When I start the engine in BPM Studio with his project I eventually get this error in a popup:
"The configuration name [<ProjectName>] and type [SQL] is not defined.
Detail: The connector must be configured in the appropriate context."
I upgraded from 10.3.1 to 10.3.2, but did not help. Still my own project and another svn-branch of his project do work.
Anybody any ideas on where to look?
Thanks in advance.
Regards,
Martien

I found out that the folder must be the same as in the project file.

How to configure MQ-FTE and IBM Datapower along with PI7.1

Hi Friends,
Can somebody guide me with the steps to configure MQ-FTE and IBM Datapower with PI7.1 for B2B communication?
Thanks,
--Sonal

1. What is the difference between JMS MQ and Native MQ? How to determine which one to use?Native MQ refers to a proprietary api provided by IBM in multiple languages including java so that applications running on these can communicate mq. IBM also provides JMS wrappers around this native api, so that a jms client can talk to mq using JMS API. This is called MQ JMS.
2. If native MQ can be used here, what are the steps to configure Native MQ on WLS in my situation?SOA suite provides a MQ Resource Adaptor which can be used to connect to MQ. The developers of this resource adapter would have used the native api to enable the adaptor to talk to MQ, so that you dont have to worry about it. However you will need to configure the properties of your local MQ ( qmgr , q name etc). This is done in the outbound connection pool properties of the resource adaptor.
please check this blog for how to do this : http://soa-bpel-esb.blogspot.com/2009/09/configuring-mq-in-11g-soa-suite.html.
Since your MQ installation is in a remote machine you will have to configure the following properties specific to your environment - hostname, port, server connection channel, along with the queue manager name and queue name
3. Do I need any foreign servers or message bridges to be configured?Not required for your case if you are using MQ Adaptor. Since MQ also provides a JMS transport , you would have required foreign servers if you have to use JMS Adaptor instead of MQ Adaptor. Native MQ is expected to be faster than MQ JMS as it doesn't have the extra JMS layer.

What steps are required to configure the Payroll Tax ( USA)?

Hi All,
Please answer
What steps are required to configure the Payroll Tax ( USA)?.
Thanks in Advance
Thank you,
GKReddy.K

hi Dan
this is covered in the Rapid Clone documents -- Refreshing a Target System
Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone
you should run adautocfg.sh on the application tier as well. Otherwise the essential information regarding your application tier will not be registered within the database and you will not be able to connect to your database through the application.
adcfgclone will not be necessary on the application tier.
Yes, you need to run AutoConfig to populate FND_NODES with the application nodes information. You may also need to clear the FND_NODES table as described in the following note:
Note: 260887.1 - Steps to Clean Nonexistent Nodes or IP Addresses from FND_NODES
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=260887.1
source;- https://forums.oracle.com/thread/652681
AppsMasti
Sharing is Caring

TS1702 my ipad2 was restored twice as it will not connect to my network, so what steps must I take to get iCloud and my ipad2 to work together and how do I connect so I am on internet????

my ipad2 was restored twice as it will not connect to my network, so what steps must I take to get iCloud and my ipad2 to work together and how do I connect so I am on internet???? I connect tp my mac mini. It is on my own network. Mail and Safari open on it just can not get my ipad back online!!! HELP! LOST HERE!!!!

Uwdawgfan-
Your new router may not correctly handle Bonjour data required by AirPrint. Contact Frontier to correct the router's setup. A firmware update may be required.
Fred

Solaris 10 zone configuration with sysidcfg and dhcp and hostname

Hi
Excuse me if I look like a n00b... it's probably because I'm a n00b.
I've been struggling in the dark for more than 2 days now and I'm wondering if I'm thinking about this all wrong...
I have stand-alone server where I need to run zones. I want to create zones and automagically configure them at boot (read: by running a script). So here's what I need...
A zone
starting from unconfigured state
whose hostname is not the same as the zone name
using corporate DHCP to get its IP address
with DNS config coming from the DHCP server
registering its address the DNS
with a preconfigured root password
(I don't own the corporate DHCP or DNS servers, I can't put my own DHCP or DNS servers on the network.)
I would lke to create the zone, throw some config at it, then boot the zone and walk away. I am using zones with exclusive-IP. I can construct the zones and manually configure them once they're started to have DHCP, my own name, registered IP address with DNS and everything else I have specified above. But I don't want to do it manually...
Sysidcfg seems to do some of what I want but not entirely.
In sysidcfg I can set the root_password, the primary interface using DHCP, DNS server. I can't set a hostname in sysidcfg AND use configure it for DHCP. So the hostname is not what I want it to be after the zone is started and ready to go. The DHCP server is providing the DNS configuration, Solaris does not seem to honour it, but i'll ignore that for the moment.
I have tried various combinations of using sysidcfg, /etc/nodename, /etc/hostname.+interface+ and /etc/dhcp.+interface+ but I can't find any combination that actually works.
I can write to the zonestorage/etc/nodename to set the nodename, that works. But it does not match the DHCP address, so I get prompted for a new name service because it can't find a DNS entry for the name.
I can write to the zonestorage/etc/hostname.+interface+ and /etc/dhcp.+interface+ (to get the system to register its name with the DNS server after getting its DHCP address) but then I get a system with no root password and no DNS configuration, even though they are set in the sysidcfg file.
I can write a script that gets part of the way using sysidcfg and /etc/... files, then boots the zone and then runs a bunch of voodoo via zlogin commands to fix all the stuff that couldn't be done 'properly', but that's not a 'boot and walk away' environment. I can write a script that uses sysidcfg and hacks around with other files in /etc (like nsswitch.conf, resolv.conf), but that just feels likes a dirty hack to fix something that wasn't done properly in the first place.
So where am I going wrong and how do I do it right (within the constraints defined)? Why can't I configure, boot and walk away?
Thanks

Thanks abrante
Thanks for your response!
I don't think the config is messed up after the installation. I think the installation is fine, it's just not what I want :-)
I'm trying to decouple the zonename from the system name and get DNS registrations working. After installation, a DHCP client can get its hostname from DNS but I'm trying to do it the other way around. I want the DHCP client specify its own hostname, get an address from the DHCP server and then register its hostname with DNS. If the system gets its name from DNS/DHCP then I have to configure those to provide the system name and I don't own the DHCP/DNS infrastructure. These zones are for a development/QA environment, so we create and reconfigure these frequently. Hence the need to specify the system name within the zone and register that name in the DNS.
I have tried fiddling with the PARAM_REQUEST_LIST but it does not seem to be working as I expect. :-$ Removing 12 did not help with setting the hostname from the system. DNS does not have a registered name for this system anyway, so even if it tried to get a name for this system, it would get nothing.
I also do want the DHCP to change the DNS server and domain name, but this does not happen even though my dhcpagent includes 6 and 15 in the PARAM_REQUEST_LIST. I still have to set them in the sysidcfg file because it is always ignored in Solaris (S10u8 with 10_Recommended 30-Jul-2010)
As stated, I know I can hack around with the system after it has booted. But I'm trying to configure the system before it starts and let it take care of itself and not have to touch it. Frankly I'm surprised that the sysidcfg does not allow you to set a hostname name when you are using DHCP, that the default DHCP configuration does not register the system name with the DNS server, and the DNS config from the DHCP response is ignored. Even a sys-unconfiged system requires DNS configuration during initial boot, when I know that the DHCP response contains DNS information.
FYI: Windows systems using DHCP work as expected in this respect by default, i.e. set system name, use DHCP --> system gets address from corporate DHCP, DNS settings are set from DHCP information, DNS registration is made for system name.
I'm working around this at the moment... I call my zone by the system name I want, I hardcode the DNS settings in the sysidcfg file and I create the hostname.+nic+ and dhcp.+nic+ files in the zone storage to get the system to register its name with DNS, them boot.
Edited by: cydonian on Aug 19, 2010 7:45 PM

I would appreciate your help on how to configure a gmail in a way it ask for the password everytime I connect?. In the only way I can configure it I have to include the pw when configuring the account and after that it do not ask for pw

I would appreciate your help on how to configure a gmail in a way it ask for the password everytime I connect?. In the only way I can configure it I have to include the pw when configuring the account and after that it do not ask for pw so everyone that shares my iPad can oppen my mail with no pw required.
Thank

The iPad is designed to be a single user device, and there is currently no way to password protect the Mail app - even removing the account password from Settings > Mail, Contacts, Calendars will just prevent new mail being downloaded, it won't hide those that have already been downloaded. There is this work-around for the app : https://discussions.apple.com/message/13127632#13127632 . Also there might be third-party email apps that feature password protecting.

You must supply a valid User Name and Password to log onto the system

he installing Hyperion 9.3.1 on a server, I installed and tested successfully Shared Services, Essbase Administration Services, Essbase Server, Essbase Client ........ my problem is when installing Reporting and Analysis
Services and installed without problems UIServices in confuguratio utility comes a list of products to configure (Financial Reporting, Web Analysis Planning .... .... among others), first configure Financial Reporting and Web Analysis, when done reboot the machine, then wake up coughing the service entrance to http://localhost:45000/workspace, correspontiente and I get this message "you must supply a valid User Name and Password to log onto the system"
I need an urgent solution k and the above does not work until the time
or failing to address where we can solve this

Hi,
First of all really you should be going through the webserver plugin port if you want to access the other components through workspace.
e.g. http://localhost:19000/workspace
If you entering the correct login details and the account you are using is provisioned then you could check out what information is in the logs :- \Hyperion\logs\BIPlus\SharedServices_Security_Client.log
Cheers
John
http://john-goodwin.blogspot.com/

How to configure IIS for SAP BO 4.0 - installed in different server?

I have installed:
Server Nr1 SAP BusinessObjects BI-Platform 4.0 in a 64 Bit Version and Server Nr2. IIS also 64 Bit Version.
(BO and IIS are not running in the same Server)
I have no idea to configure IIS. Can someone of you tell me the steps that are to do ?
Thanks a lot.
Regards

Hi Qamile,
You can't. IIS is only for integration with Sharepoint portal server. Check the supported platforms guide. Only Java web application servers are supported.
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/10ccbdf2-139f-2e10-61a0-d4af67b6257b
Regards,
Julian

SCOM must required to configure IIS MP and NLB MP ?

Similar Messages

Maybe you are looking for