SCOM Performance report

HI All,
I want to pull report for 2012 OS servers in SCOM 2012 reporting. When i search with %Processor time as performance counter it is showing 2003 and 2008 OS performance counter only , it is not showing 2012 performance counter, can anyone help me why 2012
performance counter is not reflecting in report and how to pull % Processor time report

Hi,
It sounds like the operating system instance is not being discovered. Please ensure the Agent has been installed on the Windows Server 2012.
Niki Han
TechNet Community Support

Similar Messages

SCOM 2012 R2 System Performance Report issue

Dear All,
We have SCOM 2012 R2 with SQL Server 2012.
For last few days we are stucked with SCOM System Performance Report. We are trying to achieve following:
Generate a report of last 15 days of all the following components in a single report.
Get Memory Utilization of a Particular Server in Line Chart form with Horizontal counter showing 0 to 100% Utilization and vertical couter showing Time line. Also showing total Memory of the server.
Get Processor Utilization report of a Particular Server in Line Chart form with Horizontal counter showing 0 to 100% Utilization and vertical couter showing Time line. Also showing process installed on the server.
Get Disk Time report with (I/O) MB / Sec in Line Chart form.
I have tried creating a sample with photo editor to provide you better understanding of my requirement.
We can go for customizing reports with Report builder or any other tool which can help us achieve this task. Need your suggestion for the above.
Thanks
VN

1) open the url http://reportserver/reports where reportserver is your report server
2) navigate the folder Microsoft.systemCenter.Datawarehouse.Report.library
3) click the arrow of report Microsoft.SystemCenter.Datawarehouse.Report.Performance and select download
4) repeat setp 3) for Microsoft.SystemCenter.Datawarehouse.Report.Performance.rpdl
5) rename its file name and upload its into the folder Microsoft.systemCenter.Datawarehouse.Report.library
6) click the arrow of report which you upload on step 5) and select manage
7) update its DataWarehousMain --> A shared data source as /Data Warehouse Main
8) update Custom data source as Credentials are not required and click Apply
9) click the arrow of report which you upload on step 5) and select Edit in Report Builder
10) right click the unwanted part and delete
Roger

I am unable to get a proper report if i schedule a performance report in SCOM 2007R2

Hi,
A very Good day to All.
I have created a Performance report in SCOM 200R2 to trace performance reports for specific counters. I also receive the report VIA email, But the problem is i get the same report all the time. I need the report on hourly basis but with the value of that
particular specific times.
Example:
=========
When i schedule a report for data needed for CPU utilisation from a group of servers from 1/1/2014 9AM - 10AM i get the report for that and in every 1 hr (As per the time what is set in SCOM). I get the same report every hour for 1/1/2014 9AM
- 10AM only i want an email to triger for every one Hour with its current value.
Eg: 1/1/2014 10AM - 11AM, 11AM - 12PM's CPU Report etc.
Can any one plz help me on this.

there is no option to doing this.
Roger

SCOM - Available Megabytes performance report is showing exponential data

We are running the performance report for counter 'Available Megabytes MB' in SCOM 2012 and it showing
Min and Max value in exponential format and not the correct format like in numbers.
Pls see the attached screen shot and suggest how to get the data in correct format of whole numbers in MB.
Anand Dutta

Hi,
the value is not exponential format it is in scientific notation.
There's no option to change the scientific notation to real value. Unfortunately when SCOM reports encounter large numbrs they are displayed this way. Makes them less friendly, unless you're a math major.The problem is the field wasn't designed to hold many
characters. These values should be rounded in the report definition, but in many cases they are not.
Thanks,
sridhar v

Performance Report domain controllers

Hi AD experts,
I'm lookink for a tool to generate performance report on some DC's.
a script to createt Data collector Set (on Perfmon) like http://archive.msdn.microsoft.com/ExPerfwiz
and the tool to parse the report like PAL : pal.codeplex.com
Is there any similar tool for DCs?
Thanks

I agree with Mr X, SCOM would be your best bet and the script he's provided is useful as well but I'd like to add the following.
If you don't have a budget to purchase an awesome tool like SCOM and you're looking to perfmon have a look at the links I'm providing below:
Performance Tuning Guidelines for previous versions of Windows Server
In there above link they have a few downloads for 2008, R2, and 2012. In those Word documents you'll have some information on Active Directory.
Ruling Out Active Directory-Bound Problems
The above link may have some useful information to you as it relates to GCs
NTDS Object
The above link has a lot of information just about perfmon and NTDSAs with any monitoring software you're
really going to have to figure out what you want to monitor and what's important to you, you're also going to need to baseline what you have because there's no real standard on what's is too high and what is too low. My environment may have 10 times
as many LDAP Client sessions as yours and vice versa. PAL should be able to do what you need. With the information above you should be able to find the counters you want to monitor.
If you found this post helpful, please “Vote as Helpful”. If it answered your question, remember to “Mark as Answer”.
Postings are provided “AS IS” with no warranties, and confers no rights.

Creating a performance report based upon a custom group

I am trying to create a simple performance report based on a SCOM group that I created, however when I run the report the relevant data cannot be found. When I look at the group membership I see a list of Windows servers. I then go into a generic
performance report, add a single chart, and line series, and select "Add group" and then search and select the SCOM group I created. I then add % processor time for 2008 systems as my rule. However when the report is run, no relevant
data is found. Performance reports run fine when selecting "Add group" and selecting the members of the group themselves.
My suspicion is that it is trying to run the performance report based on the group object and not the members of the group. Is there anyway that I can accomplish this? Perhaps via XML?
Keith

Hi,
For your reference:
Creating Useful Custom Reports in OpsMgr: How to create a custom performance counter report for a group of servers
http://www.systemcentercentral.com/creating-useful-custom-reports-in-opsmgr-how-to-create-a-custom-performance-counter-report-for-a-group-of-servers/
SCOM reports on performance counters for large groups of servers
http://www.bictt.com/blogs/bictt.php/2010/11/28/scom-reports-on-performance-counters-for-large-groups-of-servers
Regards,
Yan Li
Regards, Yan Li

SQL Broker Performance Reports are empty

Good day,
I'm running SCOM 2012 SP1. I was requested to deliver a couple reports for an SQL migration/upgrade.
The relevant data is in The SQL Broker Performance Reports both for SQL 2008 and 2012.
I have been looking at troubleshooting article such as: http://support.microsoft.com/kb/2573329
And all my system configs are OK, as well as positive logs. I have reviewed overrides and enable all performance ovverides on SQL MP just to see if it was going to make a change. I added an MP from VEEAM (quite cool actually) thinking I would get better
results but that also failed.
Has anyone encountered this issue before. The funny thing is that other reports give data :-).
Is there something I need to enable further, am no SQL guru.
Best regards,
Dominique.

Hi,
How about Clear the Cache for the SQL agent by following the below steps?
In the Monitoring workspace, expand Operations Manager and then expand
Agent Details.
Click Agent Health State.
In Agent State, click an agent.
In the Tasks pane, click Flush Health Service State and Cache
In addition, we may
1) stop scom agent Service (OPsMgr Health service)
2) rename forlder.C:\Program Files\System Center Operations Manager 2012\health service state.
3) start scom agent Service.
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

SCOM 2012 reporting

Hi everyone,
We are doing an exclusive webinar for MS SCOM experts and would like to invite you to join us on 24<sup>th</sup> of April.
Visit our webinar to learn how to implement self-service reporting in SCOM 2012.
Agenda:
• How to address Cloud reporting
• SCOM 2012 reporting
• DevOps and Cloud - self provisioning
• Self-service in SCOM
Join the meeting:
https://cms.join.me/axibase.com (for North and South America)
Join the meeting: https://cms.join.me/axibase.webinar (for
EMEA)
On a computer, use any browser with Flash. Nothing to download.
On a phone or tablet, launch the
join.me app and enter meeting code:
axibase.com
Join the audio conference:
Dial a phone number and enter access code, or connect via internet.
By phone:
Access Code   346-934-063# (for North and South America)
Access Code   516-347-987# (for EMEA)
United States   +1.860.970.0010
   +1.408.418.5040
   +1.860.970.0010
   +1.646.307.1990
   +1.682.710.0032
   +1.213.226.1066
Argentina   +54.11.5352.8217
Australia   +61.2.9191.6319
Brazil   +55.11.3958.8707
Canada   +1.647.977.2648
Chile   +56.22.582.8713
Colombia   +57.1.381.2853
Japan   +81.3.4579.5983
Mexico   +52.55.4631.9922
New Zealand   +64.9.951.8390
Panama   +507.836.5977
Peru   +51.1.707.5722
Venezuela   +58.212.335.7832
By computer via internet:
Join the meeting, click the phone icon and select 'Call via internet'. A small download might be required.
Best regards,
Alex Ganyukov
VP of Sales
[email protected]
Direct no. +1.408.915.5551
www.axibase.com
Axibase Corporation

Hi,
From my point of view, SCOM reporting is to use to get needed reports about service availability, performance and alerts and so on. With those report, we may do data analysis to get more details about the monitored environments.
With management pack imported, there may be many available reports that can be run to get proper information about what monitored by using this management pack.
If there is any misunderstanding, please feel free to let me know.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Vendor performance report

hai
how to create an vendor performance report which display purchase order issued to a vendor, material supplied delivery times, payment terms, prices during a period of time.
    for this report what are the tables and fields we have to use pls give me sample report..
              thank you..

Hi,
Against the RFQ's vendor submit quotations and the Based on the RFQ's data we have to compare the different Vendors with the respective data like terms and prices
Fetch the data of all RFQ's from EKKO and EKPO tables
and take the EKKO-KNUMV field and pass to KONV table and fetch the different prices based on the Condition types for each RFQ and put it in a tabular format and compare.
see the sample code
*& Report ZRFQ_COMP
*& Quotation Comparison Report
REPORT ZRFQ_COMP no standard page heading line-size 187 line-count 35.
*&Tables
Tables : ekko,
         ekpo,
         konp,
         a016.
*&Data Decleration
Data : v_pos type i value 19.
Data : begin of it_rfq occurs 0,
        ebeln type ekko-ebeln,
        ekorg type ekko-ekorg,
        lifnr type ekko-lifnr,
        matnr type ekpo-matnr,
        WERKS type ekpo-WERKS,
       end of it_rfq.
Data : begin of it_a016 occurs 0,
        ebeln type ekko-ebeln,
        knumh type knumh,
       end of it_a016.
Data : begin of it_a363 occurs 0,
        werks type werks,
        lifnr type lifnr,
        matnr type matnr,
        knumh type knumh,
       end of it_a363.
Data : begin of it_pr_details occurs 0,
        knumh type knumh,
        kschl type kschl,
        kbetr type kwert,
       end of it_pr_details.
Data : begin of it_final occurs 0,
        ebeln type ebeln,
        lifnr type lifnr,
        name1 type lfa1-name1,
        pb00 type kbetr,
        zpac type kbetr,
        zb00 type kbetr,
        ZIN1 type kbetr,
        JEC1 type kbetr,
        JHX1 type kbetr,
        JMOP type kbetr,
        JMX1 type kbetr,
        JMX3 type kbetr,
        JSEP TYPE KBETR,
        JVRD type kbetr,
       end of it_final.
Data : begin of it_vendorname occurs 0,
        lifnr type lifnr,
        name1 type lfa1-name1,
       end of it_vendorname.
*&Selection Screen
Selection-screen: begin of block blk1 with frame title text-001.
parameters     : p_matnr like ekpo-matnr obligatory.
select-options : s_ebeln for ekko-ebeln,
                   s_ekorg for ekko-ekorg,
                   s_lifnr for ekko-lifnr.
Selection-screen: end of block blk1.
*&Start-of-Selection.
Start-of-selection.
Select ekko~ebeln
         ekko~ekorg
         ekko~lifnr
         ekpo~matnr
         ekpo~werks
    into table it_rfq
    from ekko
   inner join ekpo
      on ekkoebeln eq ekpoebeln
    where ekko~ebeln in s_ebeln
      and ekko~ekorg in s_ekorg
      and ekko~lifnr in s_lifnr
      and ekpo~matnr eq p_matnr
      and ekko~bstyp eq 'A'.
if sy-subrc eq 0.
*--> Condition number from A tables.
Perform get_connum.
*--> Getting the Pricing Details from Konp Table.
Perform get_prices.
*--> Populate Vendor Name.
Perform pop_vendor_name.
*--> Populating the Final Internal table for Report.
Perform pop_final_tab.
else.
   message 'Purchase Document does not exist' type 'E'.
endif.
*&End-of-Selection.
End-of-Selection.
write :/ sy-vline,
       2 'Vendor Number',
       19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 1.
write at v_pos it_final-lifnr.
v_pos = v_pos + 35.
endloop.
write at: v_pos sy-vline,
          /(v_pos) sy-uline.
write :/ sy-vline,
       2 'Gross Price',
       19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-pb00.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
          /(v_pos) sy-uline.
write :/ sy-vline,
       2 'Packing & Forward',
       19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-zpac.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
          /(v_pos) sy-uline.
write :/ sy-vline,
       2 'Surcharge',
       19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-zb00.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
          /(v_pos) sy-uline.
write :/ sy-vline,
       2 'Installation',
       19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-zin1.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
          /(v_pos) sy-uline.
write :/ sy-vline,
       2 'Ed cess on BED%',
       19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-jec1.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
          /(v_pos) sy-uline.
write :/ sy-vline,
       2 'A/P Secess set off',
       19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-jhx1.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
          /(v_pos) sy-uline.
write :/ sy-vline,
       2 'Basic Excise Duty',
       19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-zpac.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
          /(v_pos) sy-uline.
write :/ sy-vline,
       2 'A/P BED set off',
       19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-jmx1.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
          /(v_pos) sy-uline.
write :/ sy-vline,
       2 'Ecess % set off',
       19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-jmx3.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
          /(v_pos) sy-uline.
write :/ sy-vline,
       2 'Sec ED Cess on BED',
       19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-jsep.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
          /(v_pos) sy-uline.
write :/ sy-vline,
       2 'VAT%',
       19 sy-vline.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 20.
write at v_pos it_final-jvrd.
v_pos = v_pos + 16.
endloop.
write at: v_pos sy-vline,
          /(v_pos) sy-uline.
*&Top-of-Page.
Top-of-Page.
format color 1.
Write: 'Material Number :' color 1, p_matnr color 1.
loop at it_final.
v_pos = v_pos + 1.
v_pos = v_pos + 35.
endloop.
write at: /(v_pos) sy-uline,/ sy-vline,2 'Vendor Name'.
v_pos = 19.
loop at it_final.
write at v_pos sy-vline.
v_pos = v_pos + 1.
write at v_pos it_final-name1.
v_pos = v_pos + 35.
endloop.
write at: v_pos sy-vline,
          /(v_pos) sy-uline.
*&      Form get_connum
      Condition number from A tables
form get_connum .
    Select EVRTN
           knumh
      from a016
      into table it_a016
       for all entries in it_rfq
     where EVRTN eq it_rfq-ebeln.
    Select werks
           lifnr
           matnr
           knumh
      from a363
      into table it_a363
       for all entries in it_rfq
     where werks eq it_rfq-werks
       and lifnr eq it_rfq-lifnr
       and matnr eq it_rfq-matnr.
endform.                    " get_connum
*&      Form get_prices
      Getting the Pricing Details from Konp Table.
form get_prices .
if not it_a016[] is initial.
    select knumh
           kschl
           kbetr
      from konp
      into table it_pr_details
       for all entries in it_a016
     where knumh eq it_a016-knumh.
endif.
if not it_a363[] is initial.
    select knumh
           kschl
           kbetr
      from konp
appending table it_pr_details
       for all entries in it_a016
     where knumh eq it_a016-knumh.
endif.
endform.                    " get_prices
*&      Form pop_final_tab
      Populating the Final Internal table for Report
form pop_final_tab .
data : l_subrc like sy-subrc.
sort it_a016 by ebeln.
loop at it_rfq.
    clear l_subrc.
    read table it_a016 with key ebeln = it_rfq-ebeln
    binary search.
    if sy-subrc eq 0.
      loop at it_pr_details where knumh eq it_a016-knumh.
        it_final-ebeln = it_rfq-ebeln.
        it_final-lifnr = it_rfq-lifnr.
        read table it_vendorname with
        key lifnr = it_rfq-lifnr.
        it_final-name1 = it_vendorname-name1.
        case it_pr_details-kschl.
        when 'PBOO'.
          it_final-pb00 = it_pr_details-kbetr.
          if it_pr_details-kbetr eq 0.
           clear it_final.
           continue.
          endif.
        when 'ZPAC'.
          it_final-zpac = it_pr_details-kbetr.
        when 'ZB00'.
          it_final-ZB00 = it_pr_details-kbetr.
        when 'ZIN1'.
          it_final-ZIN1 = it_pr_details-kbetr.
        endcase.
      endloop.
    else.
      l_subrc = sy-subrc.
    endif.
    read table it_a363 with key lifnr = it_rfq-lifnr
                                werks = it_rfq-werks
                                matnr = it_rfq-matnr.
    if sy-subrc eq 0.
      loop at it_pr_details where knumh eq it_a016-knumh.
        it_final-ebeln = it_rfq-ebeln.
        it_final-lifnr = it_rfq-lifnr.
        read table it_vendorname with
        key lifnr = it_rfq-lifnr.
        it_final-name1 = it_vendorname-name1.
        case it_pr_details-kschl.
        when 'JEC1'.
          it_final-JEC1 = it_pr_details-kbetr.
        when 'JHX1'.
          it_final-JHX1 = it_pr_details-kbetr.
        when 'JMOP'.
          it_final-JMOP = it_pr_details-kbetr.
        when 'JMX1'.
          it_final-JMX1 = it_pr_details-kbetr.
        when 'JMX3'.
          it_final-JMX3 = it_pr_details-kbetr.
        when 'JSEP'.
          it_final-JSEP = it_pr_details-kbetr.
        when 'JVRD'.
          it_final-JVRD = it_pr_details-kbetr.
        endcase.
      endloop.
    elseif l_subrc ne 0.
   continue.
    endif.
    append it_final.
    clear it_final.
endloop.
endform.                    " pop_final_tab
*&      Form pop_vendor_name
      Populate Vendor Name
form pop_vendor_name .
if not it_rfq[] is initial.
Select lifnr
         name1
    from lfa1
    into table it_vendorname
   where lifnr eq it_rfq-lifnr.
endif.
endform.                    " pop_vendor_name
Reward points if useful
Regards
Anji

GT70 2PC – Software testing and performance report.

It is so excited here again. Currently, my first/only object after work is playing Titanfall.
I intended to share another performance testing today. But I didn’t. I found there are too many great open box posts on different forums. Therefore, I decide to dig the MSI software compatibility and do a touring. What can I say? I’m Mr.Curiosity who really desires to know every built-in application in system. That is why I share this article with you, my friends. I would like to discuss with everybody who is interested in MSI software. Of course, I have some performance reports for you, too. Please also remind me if you find any typo/wrong in this post. Thanks in advance.
1. MSI Boot Configure
This is the first software which pops up immediately. It is thoughtful design because we can choose enter the [Windows 8.1 metro] or [desktop] by ourselves now. I give it two thumbs up!!!
Select your favorite boot configuration and press [OK]. If we want it work immdiately, we can logout the system and re-login again.
2.   MSI Remind Manager
Honestly, I didn’t know what it is in the beginning. The cute robot shows every time when I login the system. I found this is a reminder for product registration. Good, I would like to have best MSI support and warranty for my lovely GT70 2PC. But don’t worry, if you don’t want to get this message again, you just need to select the right option and close it.
3.   Synaptics TouchPad
This is a driver for mouse. [Mouse property] will show if we do the double clicks on TouchPad icon in tray. You can choose enable/disable internal pointing device when external pointing device is attached. This is brilliant. A tough guy (like me…HA! HA!) didn’t like to play game with touchpad. Because the character in game will be weak and slow if I control it by touchpad. Of course, I need the external mouse all the time and don’t want the interference from touchpad.
4.   System Control Manager (SCM)
We can enable/disable the WLAN/BT/camera devices by SCM. Besides, it can control the display brightness, volume, screen on/off and ECO. ECO is special mode for gaming watching movie.
5.   Sound Blaster CINEMA
Sound Blaster CINEMA is come from an old school audio company – CREATIVE. The software can adjust the surround sound easily. We also can adjust 5.1/7.1 surround sound for the internal speakers and external headphone. That is great, isn’t it?
Besides, we can also adjust CRYSTALIZER/BASS/SMART VOLUME/digital output by ourselves.
6.   Killer Network Manager
This is a major feature of MSI NB.
In Killer Network Manager, we can set the network priority for each of applications and we also can abandon the connection from malicious software.
[Performance] shows current status of network. We can find out which application occupied the most greedy resources by it.
[Network -> Test Network Speed] will detect the network environment automatically. Furthermore, it will adjust the priority for applications.
[Killer Ethernet] show the LAN connection info.
[Killer Wireless] show the router info.
7.   SteelSeries Engine
This is another major feature of MSI NB
If we do the right click on icon in tray, the menu will show following list. We can select [Launch SteelSeries Firmware Update Tool], [Updates]…and so on.
If we select the [Settings]. It can help us change default language and set application auto running when system power on.
I.   Buttons
Double click to open the SteelSeries Engine. I think it can set 4 different keyboard settings for each of profiles. And it can switch by FN+1~4.
[Keypress Marc] can record what you input. And [Record Delays ] can modify the delay time. HA! No game can block us anymore. Please remember to press the [SAVE] for your setting
[Launch Application] can launch any application immediately. I suggest to set the cold key for this function.
Here is example. I use [PgUp] to quick start the 3D Mark11. See, it will pop up when I pressed [PgUp].
It is simple to use [TextMarco] set our own phrase. Now I become a quick speaker in my team. One key, only one key can help me to type a lot of words.
Are you tired to press some keys that you never want to touch in game (Like WIN KEY)? It is not the problem now. [Disable Key] will do the favor and disable any key which you hate.
II.   [Colors] can change the color of backlight keyboard. Also, you can set different modes (Gaming/Audio…etc) on it.
We can change the color zone. There is not only 4 or 5 colors. The engine provides thousands of colors for us. [Audio mode] is the coolest. It will change colors by itself when we play music by speakers. I like to dance with my keyboard.
III.   We can select different languages by [Settings].
IV.   [Properties] can save our hard works of settings reliably.
V.   If you want to defeat your competitors, it is important to know your enemy. However, It is more important to know yourself. [Statistics] can help us observe which keys are most popular by our fingers.
Right click on [Profile]. It can modify/export/import/delete the profiles.
Mouse can use the same kind of settings as keyboard.
DPI setting for mouse.
Save files.
We can record the mouse, too.
8.   Norton
Norton Internet Security: Anti-Virus software, MSI provides 60 days for free.
Norton Online Backup: Online data backup software, MSI provides 30 days for free.
Norton Anti-Theft: Anti-Theft software, MSI provides 30 days for free.
If you like Norton’s products, you can buy it online.
If you don’t, I believe we can uninstall it directly.
So, the decision is ours.
Introduction from Norton official website
9.   Dragon Gaming Center
I.   System Monitor:
It can monitor CPU/GPU loading and temperature. We also can find the network speed and fan speed in it.
II.   Utility:
You can set your favorite apps in [Add new Utility].
E.g. I added a [MSI Afterburner]. Click [Open] to build the link. Do you feel familiar with something? Exactly, [Launch Application] of [SteelSeries Engine] can do this, too.
III.   Instant Play:
We can define [Fn+F4] to enable the quick start. But there is more secret.
We can also use [Browse] to assign the game which we want.
Click the icon of game and [Fn+F4] will be ready. We can only use 1 program at once.
I usually change the brightness, volume and mouse sensitive before the game. As you know, every games are different. It is sweet because we can use [Apply Setting] to do this.
I can’t believe it. We also can find the clock feature in it. How convenient it is!
IV.   Hybrid Power is another MSI feature.
It can provide the power by AC adapter and battery in the same time. We can monitor the status in here.
10. BurnRecovery
It can create the recovery CD/DVD/USB for MSI NB.
Here can select Recovery disc/USB/ISO.
I will make a ISO file first.
We can select where to put the ISO.
Creating the recovery file...
Finish!
Open the folder and we can find 4 ISO files in it.
Well…[BurnRecovery Help] provide the details spec.
In my opinion, everyone should create their own recovery image. You will need it in one day.
11. Battery Calibration
This is software for battery calibration. In order to keep our battery good, we should do the calibration every three months. Don’t forget to plug-in the AC adapter and battery during the process..
Press [Start] to begin the process. It will make the battery fully charged first.
Then, it will empty the battery like this.
System will shut down after the empty process. At last, fully charged again. It will take 4~5 hrs to complete the process.
12. MSI Dragoon Army /MSI Facebook /Web site /YouTube
Those are MSI forums/Facebook/official website/YouTube and links.
[MSI Dragoon Army] is the official forum for MSI. We can find NB, MB and AIO info in it.
Facebook Quick Link for many countries of world.
MSI official website
YouTube channel of MSI.
13. Super-Charger
There is no message when I click this app at the first time. But when I attached my IPAD, it pops up the [Super-Charger]. It is amazing because IPAD can’t be charge by this USB port. As far as I know, the USB 3.0 only provides maximum 900mA for its device. IPAD will need 2.1A for charge process. I have no idea how MSI NB make IPAD charging okay.
14. XSplit GameCaster
This is one of important features. I saw many different first class gaming machines this year. All of them have the broadcast software. (Like PS4, Xbos ONE)
It can switch the default language after we login.
Twitch/YouTube / Facebook/ Twitter/Google+ can be used by [Accounts]. It is easy to start the live show.
We can modify the resolution and use twitch by [Setting]
We can configure FPS/CPU loading/where to show on display by [Status label].
Hotkey configuration.
Videos storage.
Press [Ctrl+Tab] to call Gamecaster in game. And we can twitch or modify setting. I will provide my gaming video for you later.
15. Power DVD
This is a famous video player. Also, it can support BD format.
We can use the [Setting] to change our language.
We can change 5 times for default country .
It is glad that I’ve finished the introduction of GT70 software.
Performance report:
Um…Now is late at night. I should go to my lovely bed. Following is the testing report for the reference.
1.   FurMark
1920*1080, 15 minutes.
2.   AIDA 64
CPU and GPU stress testing, 30 minutes.
3. 3D Mark 11
4. 3DMark Vantage
5.   3DMark 2013
6.   Heaven Benchmark 4.0
7.   CINBENCH 11.5
8.   FINAL FANTASY XIV Benchmark
9.   PCMARK 7
10.   HD Tune Pro 5.50
11.   AS SSD Benchmark
12. Crystal Disk Mark
I didn’t forget my promise. Here is my gaming videos
http://youtu.be/tCd5Lnj2U0I

Editors' Choice Award. Good job MSI !!
http://www.computershopper.com/laptops/reviews/msi-gt70-dominator-893#review-body

Unable to change RFC destination in IT Performance reporting wizard

Hi Experts,
I am setting up IT Performance Reporting in my Solman EHP1 system. In the first page of the PErformance reporting wizard, it asked me for RFC destination from BI to Solman(1st field) and Solman to BI (2nd field). I initially entered an existing RFC destination that we are already using in a separate application that has a user with very-limited authorization. Now, I am trying to change the RFC destination by running the same "Configure IT Performance Reporting" wizard but both fields are already GREYED out.
I tried deleting the RFC destination previously defined in an attempt to reenable the fields but only the 2nd field was enabled. When I try to continue the setup, it results into a Shortdump because it is still looking for the initially defined RFC dest which is defined in the 1st field that cannot be edited.
SAP has not yet provided us with a solution.Your help is greatly appreciated.
Thank you very much.

You canprovide the RFC destination in DOE administration portal. Goto Configurations link and search for "BACKEND DESTINATION" parameter in "BACKEND CONFIGURATION" link. Here you can provide RFC destination at SWCV level or at Data object level.
After deleting RFC destination in SM59, it will never take you to backend system.

Vendor Scorecard Performance Report

The Vendor Scorecard Performance Report data is based on dates entered in the PO (dates provided by the vendor to us at the time we cut the PO or even months after the PO is cut-this date can change) as opposed to our expected lead time (lead time promised by the vendor in general).We always need to put the vendor's advised date in the PO so that our back-order reports have the correct ETA info. Currently, the report will show the vendor as having an almost perfect record because our expected receipt date is based on the vendor's production schedule (whether it is within our expected lead time or not).
We need some kind of indicator in the vendor set up which tells the system that the expected delivery date is "out of tolerance". Is there any way to achieve this and have the report based on expected lead time as opposed to PO dates?
Could somebody please help me to achieve this...?

No database version? No example tables and data? No attempt to solve this yourself?
Please provide the necessary details as mentioned in the SQL and PL/SQL FAQ:
{message:id=9360002}

Payment Performance Report

Dear Experts,
           Following is the scenario,
Sales Person           Raj
Customer Code       C1000
Payment Terms       15 days
Invoice Date            01.02.2010
Invoice Value          20000
Payment Date          20.02.2010
Payment Amount     20000
Payment performance 0%
As the customer has not paid within the credit days, when i execute a query based on the sales person and posting date (From, To) parameters the payment performance should result 0%.
Is the same possible to generate through query?
Awaiting your reply
saravanan
Edited by: Sanbrahma39 on Feb 16, 2010 1:01 PM

Dear Gordon,
          As rightly conveyed the payment performance is calculated based on the (Paidtodate/Doctotal)*100. I tried to generate the report using query
SELECT T0.[DocNum], T0.[DocDate], T0.[CardName], T0.[DocTotal], T0.[PaidToDate] FROM OINV T0 INNER JOIN OSLP T1 ON T0.SlpCode = T1.SlpCode WHERE T1.[SlpName] = [%0] and T0.[DocDate] > = [%1] and T0.[DocDate] < = [%2].
The thing is SAP delivered the result perfectly based on the query given above, now the condition is like the query has to check the payment received within the payment terms, then only it need to consider for payment performance.
Ex:
Sales Employee   - Raj
Customer Code    -C1000
Payment Terms    -15 days
IN1 Date                - 01.02.2010
IN1 Amount          - 10000
Payment Date      - 14.02.2010
Payment Amt       - 10000
IN2 Date              - 02.02.2010
IN2 Amount        - 40000
Payment Date     - 19.02.2010
Payment Amount - 40000
Now if i try to generate a payment performance report of a sales employee Raj as per my query it would show 100% as payment terms is not been considered.
I need a query to consider the payment terms also so when i generate a report the payment performance should be 20% only.
Hope this assists
Saravanan

What are the main tables using in vendor performance report.

what are the main tables using in vendor performance report.
how many select statements are in ABAP reports.

Refer the links -
vendor performance report !!!
vendor performance report
vendor performance report
I need standard vendor performance report
Regards,
Amit
Reward all helpful replies.

Functiona Spec For VENDOR PERFORMANCE REPORT

Hi experts
I need to develope a VENDOR PERFORMANCE REPORT. But due to some reason i cant be able to get the Functional Specification for that object. So could you please help me by sending the above mention functional Specification.
thnaks and regadrs
Pratik

Pratik,
Bad question in ABAP forum.
can you please close this thread and put it into MM forum for quick reply.
Amit.

SCOM Performance report

Similar Messages

Maybe you are looking for