SCOM reporting issue
Hi all,
We have SCOM 2012 SP1 with two Management server ( MS1 and MS2) and one SQL server . While install Reporting server role in SQL server we gave MS1 name in Specify a Management server option. After installation report works fine in SCOM Reporting TAB
. But we have take MS1 server offline , reporting is not working from MS2. Any idea how to overcome this this ?
KMS
Hi,
Take a look:
http://blog.coretech.dk/kra/how-to-make-operations-manager-2012-rc-scom-2012-fault-tolerance/
http://OpsMgr.ru/
Similar Messages
-
Hi Experts,
I have a typical situation in the LAB environment. Hope some one helps. I have Installed a SCOM 2012 R2 with SQL 2012 SP1 in a single server (Management group 1). I have installed another management group on another server using this SQL server for its database
so i have everything going fine.
The first management group has its reporting installed in the SQL server. For the second i created a new named instance for that. But i cannot run the SCOM setup in the SQL server (Also holding the Management group 1 MS) as 1 st reporting is already there.
When i run the setup it is asking me to repair it. I don't get the install option so i can install the reporting for management group 2 in the named instance.
Default instance is being used by the 1st management group.
Can any one figure a possibility for installing 2 SCOM reporting services for different management groups in a same SQL 2012 server please.
Gautam.75801Hi Yan Li,
Thank you for the reply. So as you are aware If i need to instal reporting, i need to run the SCOM 2012 R2 setup in the SQL server and select reporting and select the
instance and then mention the management server there right. I am not getting that option there it is asking me to remove or repair the existing installation as there is already a SCOM entire setup including reporting there. As it is a lab there is no problem
in testing. I have 2 reporting instances. Any suggestions for me on how to overcome this issue and deploy the second reporting in the new named instance ?
Below is the screenshot of the error what i am talking about when i run SCOM 2012 R2 setup to install reporting in the SQL server
When i click on add feature reporting is greyed out (As already 1st management groups reporting is installed)
When i click on remove or repair it
uninstalls the existing one. But i want both SCOM 2012 r2 reporting to be there(For both Management group). Is it possible ? If yes What is the trick to run the setup ?
Gautam.75801 -
Symptom
If you have failed to install SCOM reporting service, you may encounter below error when you reinstall it:
“The specified SQL server instance is not valid”.
(Figure 1)
Figure 1.
Reason
This issue may be caused by multiple reasons, for example the reasons in Figure 1.
However, you may find that SSRS and Report Server website are configured correctly and no SSL or proxy Server is used. In these scenario, you can open the log file under path
to find the root reason:
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles
Later, you will find the error as below:
ERROR: Throwing Microsoft.ReportingServices.Library.ReportServerDisabledException: , Microsoft.ReportingServices.Library.ReportServerDisabledException:
The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. ---> System.Runtime.InteropServices.COMException
(0x80090016): Keyset does not exist (Exception from HRESULT: 0x80090016)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at RSManagedCrypto.RSCrypto.ReencryptSymmetricKey(Byte[] symKeyBlob, Byte[] pPublicKeyBlob)
at Microsoft.ReportingServices.Library.ConnectionManager.<GetEncryptionKey>b__2()
--- End of inner exception stack trace ---;
Solution
According to the error message, you can delete encrypted content by following the steps below:
Open SQL Reporting Services Configuration Manager.
Select “Encryption Keys”.
Click “Delete” to delete all encrypted content. (Figure 2)
Figure 2.
After that, we can install SCOM reporting service again, after successfully install reporting service, we should see the SCOM operation console as below:
Figure 3.
In addition, you may also encounter other errors when installing SCOM reporting service, and the troubleshooting steps may be different. However, we can also check SQL reporting
service logs to find the root reason.
Here are some articles that would be helpful for SCOM reporting service installation and troubleshooting:
How to Install the Operations Manager Reporting Server
http://technet.microsoft.com/en-us/library/hh298611.aspx
Unable to install SCOM 2012 Reporting Services
http://blogs.technet.com/b/mdegre/archive/2013/05/27/unable-to-install-scom-2012-reporting-services.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Hello,
I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
SCCM and SCOM - SQL Server
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
SCOM, SCCM, SQL on same server?
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
Thanks,
Yog Li
TechNet Community Support -
Hi,
I have run a stage analysis report but it says no data inspite of open opportunities being present in the system. Could anyone kindly let me know what could be the issue?
Regards
SharatHi Sharat,
Welcome you to the forum. Please close your first thread.
Regarding your Stage Analysis Report Issue, what selection has been made? This report show closed opportunity only.
Thanks,
Gordon -
1. 30 documents of 2009 were matching and post with clear is perfomred. After performing post with clear also the line items are not moving from open line items. When we download the open line items as of today, these line items are appearing.
2. When we download the ZBLRFIOI report for GRIR a/c 349100 to have the opne line items. we have some set of documents showing as " FI Open items without J2" - This is reporting issues.
Thanks
MallikarjunaHi
Pls try with F.13 for that GR/IR account 349100 by selecting check box select gl accounts
And give Company code, year and pending document numbers in selection screen
And before that pls make sure that OB74 clearing settings maintained or not
It will clear all the open items exists
Reg
Vishnu -
Hi,
I am facing one reporting Issue relating to Display Attributes.
Characteristic: Business Partner
Display Attributes: Address0, Address1, Address3...etc.
Requirement is to display mentioned Display attributes along with Business Partner.
For this I have selected Business Partner as characteristic and mentioned above three as display attributes to Business Partner.
But Query out put is not showing Display attributes. For this I have done all settings at reporting level, all gone vain.
I am using Bex 7.0.
Kindly look in to the Issue and let me know the solution.
Regards,
Venkat.Mahipathi.
09886652422.
[email protected]Hi,
Check in Reporting properties or check attributes in analyzer proprties then it will display
************asign points if usefull***********
swapna -
User report issues in 1.1.0.21.97
A couple of issues i'm experiencing with user reports on Mac OS X in the latest pre-releas build
first off, if I am asked for a password (first time I use the connection) there is no feedback if the connection fails (worng password for instance)
The second problem I'm facing is every time I try to rerun a certain master-detail report I'm getting an NPE
this is the stacktrace:
22-nov-2006 15:37:31 oracle.report.addin.ReportEditor updateContent
INFO: ReportEditor.updateContent()
22-nov-2006 15:37:33 oracle.dbtools.raptor.controls.display.DisplayResultTable getUI
INFO: DisplayResultTable.getUI()
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
at oracle.dbtools.raptor.controls.display.DisplayPanel.refresh(Unknown Source)
at oracle.dbtools.raptor.controls.display.DisplayPanel.refresh(Unknown Source)
at oracle.report.addin.ReportEditor$1.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1882)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2202)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:234)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
at java.awt.Component.processMouseEvent(Component.java:5554)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5319)
at java.awt.Container.processEvent(Container.java:2010)
at java.awt.Component.dispatchEventImpl(Component.java:4021)
at java.awt.Container.dispatchEventImpl(Container.java:2068)
at java.awt.Component.dispatchEvent(Component.java:3869)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4256)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3936)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3866)
at java.awt.Container.dispatchEventImpl(Container.java:2054)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3869)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:176)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
reloadBuffers(): 53 nodes checked in 0.006489 second(s)
reloadBuffers(): 53 nodes checked in 0.005422 second(s)
reloadBuffers(): 53 nodes checked in 0.004306 second(s)
22-nov-2006 15:43:17 oracle.report.addin.ReportEditor updateContent
INFO: ReportEditor.updateContent()
only happens with master-detail report
Message was edited by: Barsema
barsemaWe have verified the connection error on the latest evaluation build is working as expected. i.e. if you supply wrong password you get alerted to that. This has been verified on the windows and Mac OS X. Please try the latest evaluation release 1.1.0.22.71.
Your reports issue has also been addressed.
Sue -
HI All,
We have requirement for SCOM reporting , Our End user has to see custom created reports available in SCOM reporting.
Whenever they are logging they are all seeing all the default reports, Please help how to restrict them to view only custom folderHi,
Hope the below similar thread be helpful for you:
How to Provide Restricted Reporting View in SCOM Console?
http://social.technet.microsoft.com/Forums/en-US/b0564201-47dc-4319-9958-dd6ecb9cb6e3/how-to-provide-restricted-reporting-view-in-scom-console?forum=operationsmanagerreporting
Regards,
Yan Li
Regards, Yan Li -
Update 3/22 - the below issue has been resolved.
It has come to our attention that certain Windows Phone download reporting aggregations are not matching. After investigation, we found an issue related to 11/1/14 – 11/9/14 transactions. For example, if you chose an “All
app” aggregation (6 month view) and compared it to “Monthly by app” aggregations (6 month view), the totals weren’t matching. The root cause of the issue was due to the 11/1/14 – 11/9/14 data not being considered for all of the available aggregations.
We are scheduled to fix the issue today.
If you have transactions between 11/1/14 – 11/9/14, you will see an increase in the following aggregation totals once the fix is completed:
Monthly aggregations (6 and 12 month views) by app and in-app aggregations
Cumulative downloads – app and in-app aggregations
Please note, this is strictly a download reporting issue. There is no impact to any payout reporting or payout amounts.
When the fix has been completed, I will update this post.
Thanks,
PatrickUpdate 3/22 - the below issue has been resolved.
It has come to our attention that certain Windows Phone download reporting aggregations are not matching. After investigation, we found an issue related to 11/1/14 – 11/9/14 transactions. For example, if you chose an “All
app” aggregation (6 month view) and compared it to “Monthly by app” aggregations (6 month view), the totals weren’t matching. The root cause of the issue was due to the 11/1/14 – 11/9/14 data not being considered for all of the available aggregations.
We are scheduled to fix the issue today.
If you have transactions between 11/1/14 – 11/9/14, you will see an increase in the following aggregation totals once the fix is completed:
Monthly aggregations (6 and 12 month views) by app and in-app aggregations
Cumulative downloads – app and in-app aggregations
Please note, this is strictly a download reporting issue. There is no impact to any payout reporting or payout amounts.
When the fix has been completed, I will update this post.
Thanks,
Patrick -
Odd Reporting Issue (ENTERPRISE)
I have a client with some users experiencing a rather odd reporting issue. The report runs fine, but only shows values for the totals and not the line items that make up the total.
For example, when I run the report (logged in as admin as well as under their ID), I see:
Net Sales 1,234
Cost Of Sales (1,111)
Gross Margin 123
When they log in on their machine, they see:
Net Sales
Cost Of Sales
Gross Margin 123
Very odd. I figured maybe it was an application setting, but the INI didn't look off anywhere particular.
They are running Enterprise 6.3.1 (yeah, insert comment here on the upgrade needed).
Any thoughts???Check their Effective rights, and reset them, that has worked out for me. Otherwise, try copying the user and paste it as a new user and retest; I had to delete users and recreate them to correct problems of this nature.
-
All,
I am looking at SCOM reports for memory usage and trying to get something meaningful from this.
Is anybody aware about how to convert these values? In know meaning of Min, Max etc but dont know how to convert 2.279E + 08 into meaningful infoThe values you are getting are in exponential or scientific form:
http://office.microsoft.com/en-us/excel/HP030641321033.aspx
http://en.wikipedia.org/wiki/Scientific_notation
http://www.nyu.edu/pages/mathmol/textbook/scinot.html -
SCOM 2012 R2 System Performance Report issue
Dear All,
We have SCOM 2012 R2 with SQL Server 2012.
For last few days we are stucked with SCOM System Performance Report. We are trying to achieve following:
Generate a report of last 15 days of all the following components in a single report.
Get Memory Utilization of a Particular Server in Line Chart form with Horizontal counter showing 0 to 100% Utilization and vertical couter showing Time line. Also showing total Memory of the server.
Get Processor Utilization report of a Particular Server in Line Chart form with Horizontal counter showing 0 to 100% Utilization and vertical couter showing Time line. Also showing process installed on the server.
Get Disk Time report with (I/O) MB / Sec in Line Chart form.
I have tried creating a sample with photo editor to provide you better understanding of my requirement.
We can go for customizing reports with Report builder or any other tool which can help us achieve this task. Need your suggestion for the above.
Thanks
VN1) open the url http://reportserver/reports where reportserver is your report server
2) navigate the folder Microsoft.systemCenter.Datawarehouse.Report.library
3) click the arrow of report Microsoft.SystemCenter.Datawarehouse.Report.Performance and select download
4) repeat setp 3) for Microsoft.SystemCenter.Datawarehouse.Report.Performance.rpdl
5) rename its file name and upload its into the folder Microsoft.systemCenter.Datawarehouse.Report.library
6) click the arrow of report which you upload on step 5) and select manage
7) update its DataWarehousMain --> A shared data source as /Data Warehouse Main
8) update Custom data source as Credentials are not required and click Apply
9) click the arrow of report which you upload on step 5) and select Edit in Report Builder
10) right click the unwanted part and delete
Roger -
Our test environment is quite simple one Operations Server 2012 R2; with the database and SSRS instance on another server; Service Manager 2012 is on it’s own virtual machine; and the Service Manager Data Warehouse on it’s own. I’ve been trying to demo chargeback
with scvmm and I’m having issues with the chargeback reporting.
I’ve followed this process to install chargeback reports:http://technet.microsoft.com/en-us/library/jj614406.aspx which
completed successfully. All of the cubes seem to process correctly in Service Manager and I can create a chargeback analysis excel sheet with no issues in service manager. I still do not get any chargeback reports in the Operations console though. I get some
reports under the “Microsoft System Center Virtual Machine Manager 2012 R2 Reports” heading like Capacity, Host Group Forecasting, Host Utilization, etc but no chargeback report.
I can see the chargeback report in the SSRS website but cannot get it to appear in the Operations console. If anyone has any tips or troubleshooting they can point me at I would appreciate it.Hi,
Hope the below link could be helpful:
Enabling Chargeback in a Service Provider Cloud by Kristian Nese
http://blogs.technet.com/b/privatecloud/archive/2013/04/12/enabling-chargeback-in-a-service-provider-cloud-by-kristian-nese.aspx
Regards,
Yan Li
Regards, Yan Li -
SCOM 2012 Issue The Data Access service is either not running or not yet initialized
Hello All,
My SCOM 2012 console all of sudden stopped working when I changed the size of the SQL database for the SCOM server.
The setup is all on a virtual machine running windows 2012, with SQL 2012 running SCOM 2012 SP1. Everything was working until I made the SQL server database size change.
Now I am getting an error when I try to open the SCOM 2012 console. It just says Failed to connect to server servername.internaldomain.com The Data Access service is either not running or not yet initialized. Check the event log for more information.
here is the logs from the console app (the application logs are below this)
Date: 2/11/2013 12:16:45 PM
Application: Operations Manager
Application Version: 7.0.9538.0
Severity: Error
Message: Failed to connect to server 'servername.internaldomain.com'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.X.X:5724. --->
System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
at Microsoft.EnterpriseManagement.ManagementGroup.Connect(ManagementGroupConnectionSettings connectionSettings)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because
the target machine actively refused it 192.168.X.X:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 192.168.X.X:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
Application Error: Event ID:1000
Faulting application name: Microsoft.Mom.Sdk.ServiceHost.exe, version: 7.5.2808.0, time stamp: 0x5082b3a5
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0x50988aa6
Exception code: 0xe0434352
Fault offset: 0x000000000003811c
Faulting process id: 0xb28
Faulting application start time: 0x01ce088d19221739
Faulting application path: C:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.Sdk.ServiceHost.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 5a80a27e-7480-11e2-93fc-00155d01651b
Faulting package full name:
Faulting package-relative application ID
.NET Runtime Error Event ID: 1026
Application: Microsoft.Mom.Sdk.ServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.EnterpriseManagement.ConfigurationReaderException
Stack:
at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(Microsoft.EnterpriseManagement.InProcEnterpriseManagementConnectionSettings)
at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart(System.Object)
I tried to reinstall the console and some of other mentioned things from the other posts but I think that there is a SQL issue here that I am not seeing. Can someone please help.
Thanks
Robert Lavigne Network Operations Manager - Kilobytes Data Solutions.Hi
The issue got resolved after refresh the SCOM Data base access service account in SQL 2012.
Unable to launch the operations manager 2012 R2 console after extended the C drive of the SQl server ,getting error "The Data
Access service is either not
running or not yet initialized.
Got to your SQL server -->databases-operationsmanager--security-users--locate the daa service account and refresh.issue fixed and am able to luanch. -
Can't Run SCOM Report From Link
We have a report subscription that sends out an email to a distribution list. Even though I've added the users to the SCOM roles "Report Operator", "Read-Only Operator", and "Operator" they get rsaccessdenied. The absolute only
way I've found that they can run the report successfully is if they given the "Operations Manager Administrators" or "Report Security Administrators" roles. This is not going to work because these users should not have that type of access.
Is this a bug? From what I've been reading it seems to be a big issue.Hi Matt,
Please look at this links and check if your settings are done properly:
http://www.bictt.com/blogs/bictt.php/2011/08/21/scom-trick-53-new-report
http://thoughtsonopsmgr.blogspot.ch/2010/08/how-to-scope-scom-r2-reports-for.html
http://stefanroth.net/2013/07/03/scom-role-permission-for-scheduled-reports/
Natalya
Maybe you are looking for
-
Importing mini dv to a Macbook Pro
Hello! I'm looking for help on how to import video to my Macbook Pro. I am filming with a Canon XL1 mini dv camera and my laptop doesn't recognize my camera. So I'm looking for options to get it onto my computer. I was thinking about getting an exter
-
How to send mail with zip file
Hi, We are sending email in one of our program with an attached xls file. We are sending email using classes (cl_bcs). Our requirement is to send the attached file in zip format to reduce the size. Please provide if you have any pointers to get zippe
-
Hello Gurus Can any one tell in details about credit memo creation process and need to post transactions of credit memo. Its very urgent... Thanks in advance. Regards Sasikanth.
-
Hi Guys, I'm trying to configure transaction launcher for transaction VA11 (ZDD_VA11).. I've done all the necessary settings but when I try to test it via Web client, it gives following error.. Error:- Detail transaction ZDD_VA11 not defined. Detail
-
Shipping point ZHYD is still assigned to a picking
HI Experts, I have created ZHYD shipping point through copy from 1000 shipping point. Now i am going to assignment but the shipping point ZHYD is assigned all plantsu2019 am trying to delete all plants except ZHYD.but system showing fallowing error m