SCOM Reporting Server Installation Give Error The specified SQL Server instance is not valid
Hi All,
I am trying to install SCOM 2012 SP1 Reporting Server on a Windows Server 2012 running SQL Server 2012 SP1. The SQL Server also host instance for SCCM 2012 SP1 named SCCM, and not in clustered environment.
For SCOM 2012 SP1, I choose SQL instance named SCOM. At first, I successfully installed SCCM 2012 SP1 Reporting Services. I have SSRS configured to use port 80 for both SCCM and SCOM instance, and not using SSL, with IP Address settings: All assigned. SQL
Server Agent services on both instances are configured to started automatically. I could access http://scsqlserver/reports_SCCM and http://scsqlserver/reporserver_SCCM, but could not for http://scsqlserver/reports_SCOM and http://scsqlserver/reporserver_SCOM.
On OpsMgrSetupWizard.log give error
[12:24:53]: Error:
:CheckHttpAddressResponse failed: Threw Exception.Type: System.Net.WebException, Exception Error Code: 0x80131509, Exception.Message: The remote server returned an error: (500) Internal Server Error.
[12:24:53]: Error:
:StackTrace: at System.Net.HttpWebRequest.GetResponse()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckHttpResponseFromSRSUrl(String httpSite)
I may continue Reporting Server installation that give no error mentioned above, if I choose SSRS instance named SCCM, but it is not supported for both SCCM and SCOM 2012 using same SSRS instance. Personal certificate for ConfigMgr SQL Server Authentication
on SQL Server has been exported and deleted. Restarting SQL Server also has been done, but no luck.
Many thanks for your help.
Hello,
I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
SCCM and SCOM - SQL Server
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
SCOM, SCCM, SQL on same server?
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
Thanks,
Yog Li
TechNet Community Support
Similar Messages
-
Symptom
If you have failed to install SCOM reporting service, you may encounter below error when you reinstall it:
“The specified SQL server instance is not valid”.
(Figure 1)
Figure 1.
Reason
This issue may be caused by multiple reasons, for example the reasons in Figure 1.
However, you may find that SSRS and Report Server website are configured correctly and no SSL or proxy Server is used. In these scenario, you can open the log file under path
to find the root reason:
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles
Later, you will find the error as below:
ERROR: Throwing Microsoft.ReportingServices.Library.ReportServerDisabledException: , Microsoft.ReportingServices.Library.ReportServerDisabledException:
The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. ---> System.Runtime.InteropServices.COMException
(0x80090016): Keyset does not exist (Exception from HRESULT: 0x80090016)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at RSManagedCrypto.RSCrypto.ReencryptSymmetricKey(Byte[] symKeyBlob, Byte[] pPublicKeyBlob)
at Microsoft.ReportingServices.Library.ConnectionManager.<GetEncryptionKey>b__2()
--- End of inner exception stack trace ---;
Solution
According to the error message, you can delete encrypted content by following the steps below:
Open SQL Reporting Services Configuration Manager.
Select “Encryption Keys”.
Click “Delete” to delete all encrypted content. (Figure 2)
Figure 2.
After that, we can install SCOM reporting service again, after successfully install reporting service, we should see the SCOM operation console as below:
Figure 3.
In addition, you may also encounter other errors when installing SCOM reporting service, and the troubleshooting steps may be different. However, we can also check SQL reporting
service logs to find the root reason.
Here are some articles that would be helpful for SCOM reporting service installation and troubleshooting:
How to Install the Operations Manager Reporting Server
http://technet.microsoft.com/en-us/library/hh298611.aspx
Unable to install SCOM 2012 Reporting Services
http://blogs.technet.com/b/mdegre/archive/2013/05/27/unable-to-install-scom-2012-reporting-services.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Hello,
I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
SCCM and SCOM - SQL Server
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
SCOM, SCCM, SQL on same server?
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
Thanks,
Yog Li
TechNet Community Support -
Sql server services give error the remote procedure call failed [0x800706be] in sql server 2008
sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.
So when you tried starting SQL server service it gave the error right ? or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear. As far as I read your question it has something
to do with permission. Close SSCM window and this time right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
Setup cannot connect to the specified SQL Server instance
On a clean install domain member (Windows 2012), I am trying to setup System center 2012 VMM:
1. I installed the prerequisites as instructed during the pre-setup phase of the installation then rebooted the server (SQL Server 2012 was installed and services seem to be all started properly and SQL Configuration Manager starts as well).
2. After reboot, logged again with domain admin account and Windows update installed right away SP1 for SQL server 2012. Then I rebooted again.
3. Restarted the installation process and left default values. At the "Database configuration" step, I am leaving everything by default as well and I am getting error: "Setup cannot connect to the specified SQL Server instance. Ensure that
the server name..."
4. Tried different credentials, tried using port 1433 with no effect.
Am I missing something????
Thanks.
BenjilafouineDefinitely be sure to connect with the "ServerName\InstanceName,PortNumber". If you don't reference a port number it will try 1433 and then will connect via a dynamic port number. It is best in my opinion to always specify a specific port for each instance
to listen on in the SQL Server Configuration Manager so that you can open the fewest number of ports in the Windows firewall. -
Cannot connect to the specified SQL Server instance
I am trying to install Microsoft System Center 2012 R2 Virtual Machine Management.
I am getting the following error:
Setup cannot connect to the specified SQL Server instance.
Ensure that the server name, isntance name, and, if speceified, port number are correct. If you are installing VMM remotely, ensure that remote connections are set up correctly, and then try Setup again.
I have installed the
Microsoft® SQL Server® 2008 R2 Command Line Utilities
but have not set up any SQL Server instances.
how should i proceed?
Edit:
The followign fields are configured:
Server Name: The name of the machine i am using
Port: <empty>
Use the following credentials <NOT ticked>
Instance name <empty> (the drop down is empty)
New Database <Ticked> : VirtualManagerDBIs SQL server is properly installed on the system?
Are you able to connect with SQL server instance?
As per the given details looks, only client utilities installed and trying to create the database which needs SQL server.
Make sure you are able to connect with the "ServerName\InstanceName,PortNumber" and hope installing the system as per below article:
http://technet.microsoft.com/en-us/library/gg610656.aspx
Hope it help!
Please click the Mark as answer button and vote as helpful if this reply solves your problem -
How to do Ad-hoc reports with SSRS 2012 (Report Builder 3.0) for the database SQL Server 2012
<p>Hi,</p><p>Please could anybody help me how to do ad-hoc reports by using SSRS 2012.</p><p>I am able to create ad-hoc reports using Report Builder3.0 and SQL Server 2008 R2. </p><p>I have built the report Model
in for the instance 2008 R2 </p><div class="t-paste-container">Using Report Manager 2012 </div>Hi Gowri,
From your description, you can create create ad-hoc reports using Report Builder 3.0 and SQL Server 2008 R2, and now you want to know how to how to do ad-hoc reports by using SSRS 2012, right? In SQL Server 2012, the default version of Report Builder is
3.0, so you can create create ad-hoc reports using Report Builder 3.0 as before.
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
TechNet Community Support -
Hi
I am getting the following error message displayed in the screenshot below.
Can i ignore the error or what is the solution to rectify the error ?Thanks for your assistance.
First let me know how to confirm my installation as cluster or not ?
I extracted the ISO file and followed the link. which just starts run the SQL Server 2012 ISO file.
How can we run an ISO file ? we can only run setup.exe.
I have got that error in Edition Upgrade facility in the Maintenance Dialog.
Actually i am not using any clustering features, it is only one server.
Installation might have been cluster.
from what you posted I dont think it is a cluster. To tell whether sql server cluster is instaled plz see below link. More over you can go to services.msc and see if you can find cluster services if not no cluster is present
http://sqlblog.com/blogs/linchi_shea/archive/2011/12/27/where-is-sql-server-running-in-a-cluster.aspx
You should not run ISO file please extract it on local drive to a particular folder and when extract is complete you will see green color setup file right click on it and select run as administrator a installation window will pop up on that select maintenance
and then select edition upgrade. All this info mentioned in link I posted.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
I'm trying to get a list of folders in a hierarchy that don't contain any mp3 files. (The goal here is to eventually clean up all the "empty" folders that only have album art, thumbs.db, desktop.ini, etc. files left). So I wrote a quick PowerShell
command to try to do this. But it doesn't seem to be working.
I already checked out this thread <Get-ChildItem
SomeFile[].txt occurs error because of the [brackets]: "specified wildcard pattern not valid"> and I think I'm using LiteralPath correctly. Any other hints for troubleshooting this problem? Here's the command I'm using.
Get-ChildItem -Recurse -Directory | ?{
@( @(Get-ChildItem -LiteralPath $_.FullName -Recurse) | ?{
$_.Extension -eq ".mp3"}).Count -eq 0 }
This is on the latest version of PowerShell found in Windows Technical Preview.Fair enough, but it still doesn't answer the original question- why isn't this working with -LiteralPath when the path contains brackets?
Get-ChildItem -Recurse -Directory | ?{
@( @(Get-ChildItem -LiteralPath $_.FullName -Recurse) | ?{
$_.Extension -eq ".mp3"}).Count -eq 0 }
Thanks,
Ben -
Complete text of error message when attempting to start Firefox.
The procedure entry point PL_Clear ArenaPod could not be located in the dynamic link library plds4.dll
Firefox never opens before or after the error message.
After I close the error message window, I also get message from ZoneAlarm (my security software) asking me to send them an error report.
I had just accepted an automatic update from Firefox prior to the problems occurring.Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
Paper Size Error: The specified custom paper size is not supported in the selected tray.
This happens when I try to print a web page using firefox. When I copy and paste the same yrl into safari and select that page in Safari it prints without a problem.
Hello Bhumika2 ,
Welcome to the HP Forums.
I see that you are having some printing issues with paper sizes.
Seeing that the operating system is 10.5, the printer is not supported on this version. I suggest that you check for apple updates and see if anything is available.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
I've tried to create a subscription by Web Service api calling the method CreateSubscription and I've an error:
> The value of parameter 'ExtensionSettings' is not valid. --->
> Microsoft.ReportingServices.Diagnostics.Utilities.InvalidParameterException:
> The value of parameter 'ExtensionSettings' is not valid.
Below is my code:
ReportingService2010 m_RptManager = new ReportingService2010(); m_RptManager.Url = "<path>/ReportService2010.asmx"; m_RptManager.Credentials = GetCredential(); string filename = Path.GetFileName(m_FileName); string path = Path.GetDirectoryName(m_FileName); ParameterValue[] extensionParams = new ParameterValue[7]; for (int i = 0; i < extensionParams.Length; i++) extensionParams[i] = new ParameterValue(); extensionParams[0].Name = "FILENAME"; extensionParams[0].Value = filename; extensionParams[1].Name = "FILEEXTN"; extensionParams[1].Value = "False"; extensionParams[2].Name = "PATH"; extensionParams[2].Value = path; extensionParams[3].Name = "RENDER_FORMAT"; extensionParams[3].Value = m_Format; extensionParams[4].Name = "WRITEMODE"; extensionParams[4].Value = "Overwrite"; extensionParams[5].Name = "USERNAME"; extensionParams[5].Value = m_UserName; extensionParams[6].Name = "PASSWORD"; extensionParams[6].Value = m_Password; ExtensionSettings extensionSettings = new ExtensionSettings(); extensionSettings.Extension = "Report Server FileShare"; extensionSettings.ParameterValues = extensionParams; MinuteRecurrence pattern = new MinuteRecurrence(); pattern.MinutesInterval = 1; ScheduleDefinition schedule = new ScheduleDefinition(); schedule.StartDateTime = DateTime.Now; schedule.EndDateSpecified = false; schedule.Item = pattern; XmlSerializer serializer = new XmlSerializer(typeof(ScheduleDefinition)); string dateMatch; using (StringWriter sw = new StringWriter()) { serializer.Serialize(sw, schedule); dateMatch = sw.ToString(); } string reportPath = "MyReport"; string eventType = "TimedSubscription"; string description = "description"; m_RptManager.CreateSubscription(reportPath, extensionSettings, description, eventType, matchData, GetReportParameters(reportPath));
Where have I wrong?Thank for reply, I checked my parameter and I seem that (maybe) is ok below is my parameters, do you see anything of wrong?
<?xml version="1.0" encoding="utf-16"?>
<ExtensionSettings xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Extension xmlns="http://schemas.microsoft.com/sqlserver/reporting/2010/03/01/ReportServer">Report Server FileShare</Extension>
<ParameterValues xmlns="http://schemas.microsoft.com/sqlserver/reporting/2010/03/01/ReportServer">
<ParameterValue>
<Name xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">FILENAME</Name>
<Value xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">pippo.xls</Value>
</ParameterValue>
<ParameterValue>
<Name xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">FILEEXTN</Name>
<Value xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">False</Value>
</ParameterValue>
<ParameterValue>
<Name xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">PATH</Name>
<Value xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">\\10.4.44.253\D$\Data Applications\DBP\Output\DOMAIN\User\14</Value>
</ParameterValue>
<ParameterValue>
<Name xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">RENDER_FORMAT</Name>
<Value xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">EXCEL</Value>
</ParameterValue>
<ParameterValue>
<Name xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">WRITEMODE</Name>
<Value xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">Overwrite</Value>
</ParameterValue>
<ParameterValue>
<Name xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">USERNAME</Name>
<Value xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">domain\user</Value>
</ParameterValue>
<ParameterValue>
<Name xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">PASSWORD</Name>
<Value xmlns="http://schemas.microsoft.com/sqlserver/2005/06/30/reporting/reportingservices">xxxxxx</Value>
</ParameterValue>
</ParameterValues>
</ExtensionSettings>
-
Trying to make Reporting Services Configuration Manager work. Or, SQL Server Reporting Services.
Under Start > Programs > Microsoft SQL Server 2008, I have the following:
SQL Server Management Studio
Configuration Tools
Integration Services
Import and Export Data
Under Configuration Tools, I have the following:
SQL Server Installation Center
SQL Server Configuration Manager
SQL Server Error and Usage Reporting
Reporting Services Configuration Manager
I tried to enable Reporting Services through 'Reporting Services Configuration Manager' but I don't seem to have much control from this view. I see two boxes, one named Server Name (and it shows my server name) and the other is named Report Servicer Instance (and this is grayed out). If I click on the Find box next to Server Name, I get this message:
Report Server WMI Provider Error: Invalid Namespace
Details
Invalid Namespace
To get the Server Name I right-clicked SQL Server > Properties > General
Any ideas on how to make Reporting Services Configuration Manager work? Or, can you please give me more details on how to access "System control" => "Services"? I'm not seeing it anywhere and I'm not seeing any way to find "Sql Server Reporting Services". Basically, I'm trying to activate my SQL Server Reporting Services.
I am using SQL Server 2008 Express Management Studio. Is SQL Server Reporting Services included in Express Management Studio? I read, online, that it is, but I can't find it anywhere.
Thanks again!
Ryan--
<input id="gwProxy" type="hidden"><!-- Session data--></input> <input id="jsProxy" onclick="jsCall();" type="hidden" />Thanks Jerry Nee!! This may be exactly what I’m looking for! I went to this link:
http://www.microsoft.com/downloads/details.aspx?FamilyID=B5D1B8C3-FDA5-4508-B0D0-1311D670E336&displaylang=en#filelist
At the top of the page it says, ‘Microsoft® SQL Server® 2008 Express with Advanced Services’, which seems like this is what I’m looking for, so I downloaded the file named ‘SQLEXPRADV_x86_ENU.exe’
Then, I cut that from my desktop and pasted it in my C-drive and I get a message that says, ‘this folder already contains a file named ‘SQLEXPRADV_x86_ENU.exe’, would you like to replace the existing file?’
I’m thinking…what the heck? Do I already have this thing? If so, why can’t I see SQL Server Reporting Services? Maybe I have it now, and I just don’t know how to access the reporting Services features…
Couple quick questions:
What’s the difference b/w these two files:
‘SQLEXPRADV_x64_ENU.exe’ and ‘SQLEXPRADV_x86_ENU.exe’?
Also, my current version of SSMS, Help > About shows this:
Microsoft SQL Server Management Studio
10.0.1600.22 ((SQL_PreRelease).080709-1414 )
Microsoft Data Access Components (MDAC)
2000.085.1132.00 (xpsp.080413-0852)
Microsoft MSXML
2.6 3.0 5.0 6.0
Microsoft Internet Explorer
8.0.6001.18702
Microsoft .NET Framework
2.0.50727.3603
Operating System
5.1.2600
Should Server Reporting Services be included in this version? I think so!!!
Under Start > Programs > Microsoft SQL Server 2008 > Configuration Tools > Reporting Services Configuration Manager, I see this:
Connect to a report server instance:
Server Name:
Report Server Instance:
My server name is ‘'EXCEL-4J2W8KYNP', which I got from Control Panel > System Properties > Computer Name > Full Computer Name;
However, when I put that server name in the box, and hit ‘Find’ I get this message: ‘Report Server WMI Provider error’ Invalid namespace
Details: Invalid Namespace.
I have no idea what this means…
Thanks for everything!
Ryan--- -
Error in connecting SQL Server ODBC connection to Oracle 8i
I am tried connecting Oracle 8i on Windows2000 to SQL Server on Windowns2000 using ODBC. Sitting on Oracle server, in datasource(ODBC) when i give SQL servername and userid and password and click next, it gives error:
connection failed
SQL Server Error:1326
ODBC SQL Server driver(Namespipe)
client unable to establish connection
can anyone help urgently?<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by sanjayp patel ([email protected]):
I tried connecting Oracle 8i on Windows2000 to SQL Server on Windowns2000 using ODBC. Sitting on Oracle server, in datasource(ODBC) when i give SQL servername and userid and password and click next, it gives error:
connection failed
SQL Server Error:1326
ODBC SQL Server driver(Namespipe)
client unable to establish connection
can anyone help urgently?<HR></BLOCKQUOTE>
null -
Creating EO: The specified schema object name is not an existing object.
Hi Experts,
I am Using Jdev 11.1.2.2
I am connecting to Mysql DB, When am creating a EO with in the same schema, am getting following error:
The specified schema object name is not an existing object. Unselect Existing Object or enter an existing schema object.in jdev
If i unchecked the existing schema its creating empty eo, it is unable mapping the attributes. So how can resolve it.
Pl help out me.
Best Regards
Bittu.try prefixing the objectName with the schemaName when you create the EO in mySQL , as mentioned at end of this thread -
Error creating EO- The specified schema object is not an existng object -
The page contains markup that is not valid when attached to master page
Hi,
I have create an web application in VS 2005 and convert into VS2008. now i am facing a problem that a single page is not open in design mode which is inherit from master page.
and a message comes.
Error: The page contains markup that is not valid when attached to master page
please give me the suggestion that how can i open this page in design mode.
Thanks
Gaurav AnandNeither worked for me. Here is my code.
<
asp:Content ID="Content1" ContentPlaceHolderID="fkhead" Runat="Server">
<script runat="server">
Public Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not Page.IsPostBack Then
Dim a As String = "This is other data"
pqriminadpaylbl.Text = a
pqrimincustlbl.Text = a
pqriminadpaylbl.Text = a
pqriminpcdevlbl.Text = a
pqriminpctoollbl.Text = a
pqriminsaleslbl.Text = a
pqriminspadeslbl.Text = a
pqriminspamatlbl.Text = a
pqrimintdamortlbl.Text = a
pqrimintdcclbl.Text = a
pqrimintddtlbl.Text = a
pqrimintdfclbl.Text = a
pqrimintucdeslbl.Text = a
pqrimintucdollarlbl.Text = a
pqrimintucmatlbl.Text = a
pqriminvolaslbl1.Text = a
pqriminvolaslbl2.Text = a
pqriminvolasyear1lbl1.Text = a
pqriminvolasyear1lbl2.Text = a
pqriminvolasyear1lbl3.Text = a
pqriminvolasyear1lbl4.Text = a
pqriminvolasyear1lbl5.Text = a
pqrimindislbl.Visible =
False
pqriminprevbtn.Visible =
False
pqriminnextbtn.Visible =
False
End If
End Sub
</script>
<style type="text/css">
.trest
.newStyle1
text-align: right;
.table
width: 100%;
.newStyle2
font-size: 20pt;
font-weight: bold;
text-decoration: underline;
text-align: center;
.tdparts2
font-size: 16pt;
font-weight: bold;
.tb25
width: 25%;
font-size: 9pt;
.tb20
width: 20%;
font-size: 9pt;
.tb40
width: 40%;
font-size: 9pt;
.tb30
width: 30%;
font-size: 9pt;
</style>
</
asp:Content>
It works fin, but the designer keeps craping out. This was not happening until recently. Not sure what is up with it.
Maybe you are looking for
-
Setting environment variable Forms 10.1.2.0.2 (10g)
Hi, We are migrating forms from 6i to 10g(10.1.2.0.2). We want to run reports in batch form Forms 10g and setting these environment variable. Please let me know correct path for these variables in Application Server. FORMS_PATH= FORMS_OUTPUT= FORMS_M
-
recently sold laptop and have migrated to a new one I now get error 150:30 when I try to open the programme. am on a macbook pro with mountain lion
-
hi, some body run auto clearing tcode(f.13),we have to reset all cleared items.what is the tcode.we are using FBRA.in this tcode we have to do one by one document number.we have more than 150 documents.is it possible to do all documents at a time wha
-
Seems like Yahoo is the new Firefox default browser.
-
I have a 65 minute project on FCP that is NTSC. I need to output a copy of that to DVCAM in PAL. The DVCAM recorder can record in PAL. Do I need to convert the FCP project first? I used compressor to create a PAL quicktime file but honestly the quali