SCOM show every object in the report

Hi,
i got the following output in the report all objects are appearing before the report itself, any help in not showing this ?

Hi,
Do you mean that without click on plus sign, all objects are shown in the report?
Then what happen when you click on plus sign?
As far as I can tell, the report is build by report builder, and stored in the corresponding management pack, if you don't want the report like this, then we may need to rebuild it with designer, or create another report by using report builder.
Regards,
Yan Li
Regards, Yan Li

Similar Messages

How to align object in the report layout

Hello,
I find it very difficult to aligin objects in the report editor or in the template editor. I know there are some alignment options, like aligning to the grid or aligning a group of objects, but they seem to work on the bounding rectangle for the object. For my text objects, those rectangles are arbitrarily sized. So aligning those rectangles does not correctly align the text baseline, for example.
Does anyone have a tip on how you can align objects? I there maybe a way to alter the size of objects by changing a number in a property sheet somewhere?
Regards,
Frans

The problems I am having now occur when I am editing the margin in the template editor. For some reason, the flex and confine options can not be turned off in the template editor. I believe they are turned on in this mode, at least in tools:options: paper layout they are turned on. But anyway, this really does not matter because I don't have nested objects in the margin. The objects that will go flying off are completely unrelated to the object I want to move or resize.
Update: I have just tried editing the layout of a report that was based on the template I am working on. Turning flex off there had a positive effect. It seems indeed the 'flex' setting is to blame for the problems I am experiencing. Thanks for the tip!
So now I would really like to know how to turn of flex in the template editor..

Show SQL Query to be showed in Text object at the report

Is there any way where I can take/copy the query showed in "Database->Show SQL Query" to be showed as a field in a TextBox inside the report.
So it is a bit clearer what I am trying to do, it is to get who, when and what runs that report.
Thanks in advance
Tonio

Hi Toni,
I am not sure if I have understood your requirement. If you could elaborate what you are trying to do then i may be able to help.
I understand you want to copy the query which is displayed in DATABASE->Show query name... I hope u are refering to SQ01 trx...
I am not sure what next part..
Rgds
Abhijit

Function to show Universe Objects used by reports

Is there a function in XI3.1 to see all of the reports in which a particular Object is being used?
I don't see any of the canned audit reports that would show this.
Example: I have a Universe Object called "Ins. Proper Name'' and I want to see how many of our reports are using this object.
Thanks,
Mike

Mike,
Here is what I use:
Result Objects:
-Universe Name from Actions/Action Details
-Action Type from Actions
-Document Name from Actions/Document Operation
-Action Time from Actions
-Action Type Detail from Action/Action Type
Query Filters:
-Action Time Between <Begin Date> and <End Date>
Report Filters:
-Action Type In List: SQL Value
Note: Action Type Detail contains the SQL for every query that is run within the date range provided. While the SQL contains the name of every query in every report, it does not use reference a universe object by name. i,e, to check whether a specific universe object exists in the report, you will have to search for the object's sql.
Also, I use an additional another query filter to return only objects that match a specific pattern.
Let me know if you need anything else.
Best,
Srinivas

Missing objects from the report editor...

When some users try to create webi reports, they select their objects for the result and conditions, then they click Edit Reports under the Data tab, Documents - sometimes the objects don't show up? Is that a problem on the Client side or Server side?
Business Objects XI R2.

No, they have not tried that - but one of the users cleared their cookies and files under Internet Options - and now they see the objects?

The Picture of OLE object in the report can't be printed, and how to sovle dynamic OLE object based on path

Hi, everybody, I have a problem which the picture in the report can't be printed.I want to display some pictures in the reports and print them.So I insert the picture as OLE object, select the graph format and set graph location fomular with the path of the picture which is stored in the local machine. I run the system and generate the report, the picture is displayed correctly in the report, but when i print the report using ie's tool, the picture is gone and replaced with a little red mark. I want to use the new feature of dynamic graph location about the crystal report xi version, but I don't know where I should put the picture into on the web server and what the path is . Because my web server is installed in the another machine.I check the view source of html report and find that the system searches the picture under the crystalreportviewer11 folder on the web server.

Need to give the web server access to the folder

Multiple value variable - not showing Multiple values in the report

Hi,
I have careated a Multiple value variable for one of the characteristics in my Query. however, When i run the Query and select multiple values for the same, the report displays values for only the first selection.
Could you help me resolve this ?
Rgds
Shweta

Hello Shweta,
Are you running the report in the Analyzer excel or Web?
May be you can check the following:
1. Use the latest FEP. It is working for me.
2. May be the other values that you selected do not have corresponding keyfigures values. Hence it is showing only the first one.
Try selecting other values ( except first one selected this time )
Regards,
Sheik Bilal

How the show parameter form for the report over the web by using an url ?

hello,
my url to call my report is :
http://server/reports/rwservlet?report=rtm0350.rep&desformat=html&userid=un/pw@hostring&server=rep_server&paramform=yes
but it doesn't show me the parameter form to introduce the parameters and I get :
'FINISH SUCCESSFULLY'
has anybnody any idea ?
thank's

If this is a 'paper' report then =yes has always worked for me as long you have parameters declared in the report.
Description Use PARAMFORM to specify whether to display the Runtime Parameter
Form when you execute a report through CGI or a servlet. PARAMFORM is used only to
supply parameters to paper layout reports, not JSP-based Web reports.
Syntax PARAMFORM=YES|NO|HTML
Values
■ YES Display the Parameter Form.
■ NO Do not display the Parameter Form.
■ HTML Display the Parameter Form in HTML format.
Message was edited by:
Bob C

A group by field needs to appear on every page of the report.

Hi.
My rtf template has a word header which is the report descriptn that appears on evry page. The report is grouped by business unit and then grouped by job description. The problem is the business unit appears only first time when it gets changed and then it does not repeat its value until the next BU comes up. I want to display the BU on each page even though the value is same (just like as a heading of a section). I used the follwing tags. The one in bold is to solve the issue of puting the BU descr on each page. But does not work. Anybodys help is greatly appreciated.
*<?fld_BUSINESS_DESCR?>*
<?for-each-group:row_CU_DET_STG;./fld_BUSINESS_UNIT?><?sort
<?fld_BUSINESS_DESCR?>
<?for-each-group:current-group()/fld_JOB_FUNCTION?>
<?fld_JOB_DESCR?>
Sid

Thanks alot Tim for spreading your expertise. That worked !!. I added the start and end body tag along with your solution of using the section with the group and it worked. Thanks alot again. However there is one prob now the page numbers are being reset and i dont want to reset it because the page numbers should continue in sequence till the end of the report despite of Business Unit change. Please any suggestion to solve this problem.
Edited by: user12107527 on Oct 27, 2009 6:50 AM
Edited by: user12107527 on Oct 27, 2009 9:06 AM

Showing Prompt values in the report

A report contains two prompts. Users want those values shown in the report, ideally in the title. Is this possible? If so, please provide some direction.
Regards,
JS

You can do so by using presentation variables for those prompts and then using those variable names in the report title.
Doing that will give what your users want.

Discoverer Report showing invalid characters in the report data

Hi,
Can you please help me. I have designed a discoverer report in discoverer desktop 4i, when it is running the data showing some invalid characters in the data like below.
kara¿ah L¿MAK HOLD¿NG A.¿
I have executed the same query in sql plus at that time the data shows correctly. Please let me know, is there any settings required.
Best Regards,
Umamaheshwar.

Hi Umamaheshwar
This could be a registry setting. Let me give you some background. In the Windows registy, every Oracle Home has a setting called NLS_LANG. This is the variable that controls, among other things, the numeric characters and the language used. The variable is made up of 3 parts. These are:
language_territory.characterset
Notice how there is an underscore character between the first two variables and a period between the last two. This is very important and must not be changed.
So, for example, most American settings look like this: AMERICAN_AMERICA.WE8MSWIN1252
The second variable, the territory, controls the default date, monetary, and numeric formats and must correspond to the name of a country. So if I wanted to use the Greek settings for numeric formatting, editing the NLS_LANG for Discoverer Desktop to this setting will do the trick:
AMERICAN_GREECE.WE8MSWIN1252
Can you please check your settings? Here's a workflow:
a) Open up your registry by running Regedit
b) Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE
c) Look for the Oracle Home corresponding to where Discoverer Desktop is installed. It's probably called KEY_ORANT
d) Clicking on the Oracle Home will display all of the variables
e) Take a look at the variable called NLS_LANG - if it is correct Exit the registry
f) If its not correct please right-click on it and from the pop-up select Modify
f) Change the variable to the right setting
g) Click the OK button to save your change
h) Exit the registry
Best wishes
Michael

Web Page title is showing technical name of the report

When BI report is running from portal (web), in the wab page titel is showing report technical name. But i want to display report description,
If any one knows about this pls send me the how fix that. I am working on BI 7
Thanks
Samit

Hi,
Have you used a Text Item for displaying the name of the Query ? If yes, in the properties of the Text Item, you would have binded the Data Provider. Here, you can give the option of Displaying General Text and the General Test Item can be the Query Description.
Pls let me know if you have used somthing else or in some other way.

Templated report not showing static text/objects on inheriting reports

Post Author: linksfield-leon
CA Forum: Crystal Reports
I have created some basic templates with style/font for all objects on the report as well as some static heading information with parameter fields which will be used in all inheriting reports.However, when applying the template from the file it does not inherit any of the static text/parameters.I've noticed that when I open Crystal Reports 2008 templates, they have red markers on all objects to the left, re-saving this file and then using it as a template does mean that all the static text is inherited.What am I missing here?

Post Author: linksfield-leon
CA Forum: Crystal Reports
Anybody? Please...

Help required in embedding flash file object into Crystal Report file.

Hello,
      I use the default version of Crystal Report (i.e.'Crystal Report Basic For Visual Studio 2008 - version 10.5' ) which is the part of 'Visual Studio 2008', to create and display the Report. Further, as a requirement, I have to show 'Event Video' into the Report. But, as this default version of Crystal Report does not support Flash File, I uninstalled it and downloaded and installed the 30 days trial version of the Crystal Report (i.e. Crystal Report 2008 - version 12.0).
      Then, I created a new Crystal Report File using 'Crystal Report 2008 Designer', embedded the video as a Flash File(i.e. SWF file) into it. Now, when I add this newly created Crystal Report File into my sample application, which is created using VS 2008, it does not shows the embedded video.
      So, can anybody please tell me, how can I embed the Flash File into Crystal Report, so that it will be visible in the sample application?
I would like to appreciate your help and support.
Thanks,
-Yogesh.

Symptom :
When embedding a pdf document into a Crystal Report, only the one page shows.
Reproducing the Issue
Environment:
Crystal Reports OLE object
Cause
An OLE object only displays the first page.
Resolution
Embed multiple objects, one for each page
Or
Use a hyperlink to the object instead
Hope this helps!
Regards,
Vinay

Reg: 0COUNTRY and 0REGION are not displaying in the report

Dear SDNERS,
I am facing a problem in CRM Report " 0CRM_C04_Q003" I am not able to get the 0COUNTRY & 0REGION data in the reports it is showing # Not Assigned.
When I check the 0REGION & 0COUNTRY it is having data in it in the info objects.
I come to know that both the objects are navigational attributes of "0CRM_PROSPE" info object in the report and this info object does not have any data in it as it is having a referece char of 0BPARTNER.
0BPARTNER is not showing the data for 0COUNTRY AND 0REGION. pleaes advice how to get this in CRM report.
Points will be assigned for a quick response.
Regards,
Prasad.

Hi,
0COUNTRY and 0REGION as you said are Nav Att of 0CRM_PROSPE Master data.
If Master data object itself is not having data then it would not be possible for you to get data for these objects.
You can include these two objects in your InfoProvider and add in your Query as normal InfoObjects instead of Nav att.
Note: The two Infoobjects should be mapped with the appropriate source fields in the transformation and data load should be successful.
Hope this would resolve your issue.
Regards,
Geeta

SCOM show every object in the report

Similar Messages

Maybe you are looking for