SCOM to NOT monitor certain database instances

SCOM version: 2012 R2 RU3
Our SQL guys have gone out and purchased SpotLight and want to use it as the primary for monitoring and alerting on SQL at the database and instance level on "select" servers. So instead of SCOM monitoring, lets say all 6 databases on a SQL
server, it monitors 3 and Foglight monitors the remaining 3.
I see where I have the ability to start maintenance mode on select databases and need to know if this is the preferred practice? If not what are my options.
Any responses appreciated.

Phil, hi!
It depends on what you'd like to achieve. In case that you want to stop monitoring them temporarily than maintenance mode on DB level is a good way.
If you'd like to stop monitoring persistent and don't need the objects discovered you could disable the db discovery by override and run the following cmdletmin the Operations Manager shell:
Remove-SCOMDisabledClassInstance
Cheers,
Patrick
Please remember to click “Mark as Answer” on the post that helped you.
Patrick Seidl (System Center and Private Cloud)
Website: http://www.syliance.com
Blog: http://www.systemcenterrocks.com

Similar Messages

Hand Held application not recognising a database instance when running in cradled mode through Windows Mobile Device Centre.

How do I get a Hand Held application to recognise a database instance when running cradled through Mobile Device Centre?
I have a database instance on a networked machine as NZTESTSERVER2\NZ2008.
If I run the Hand Held application in WI-Fi connected mode it resolved this database connection name without any problems.
This database connection name also works from a Desktop application running on the PC that I have cradled the Hand Held to.
But the instance isn’t being resolved when I run the Hand Held application in cradled mode, without a Wi-Fi connection. In this case it still recognises the server address part ‘NZTESTSERVER2’ but it doesn’t recognise this with the database instance included
(\NZ2008).
I even tried using it with the servers IP and the instance (192.168.0.14\NZ2008), but again it recognises the server IP address (192.168.0.14), but not with the instance (\NZ2008).
So why does the app run in WI-Fi but not cradled mode?

It would better to understand your problem if you can share some code here,

How to NOT monitor SQL database on specific servers only

I have a test server with SCOM agent installed. I am using it for Lync watcher node to monitor Lync using SCOM. On this server there is a local SQL Express database. SCOM has MP for SQLs and alerts me about this SQL express database on test server that there
is buffer cache hit ratio too low or page life expectancy too low.
How to disable these SQL monitors for only this test server?

I am wondering whether using this cmdlet "Remove-SCOMDisabledClassInstance" I will not remove
any other SQL 2012 monitoring on another servers in my environment?
I also found this blog post
http://www.systemcentercentral.com/how-to-remove-objects-from-monitoring-remove-scomdisabledclassinstance/
where there is slightly different method, they propose to choose "SQL server 2012 installation seed"
rather than "SQL Server 2012 DB Engine"
They also suggest to use "Override the Object Discovery" rather than "Disable
the Object Discovery". What is the best approach?

Monitoring a 9.2.0.3 database instance in Grid Control 11gR1

Hi,
we configured EM Grid Control 11gR1 for monitoring some database instances. The monitoring works fine for the versions 9.2.0.1, 10.2.0.4 and 11gR2 , but we cannot configure it for version 9.2.0.3 and version 9.2.0.6.
The main page of 9.2.0.3 and 9.2.0.6 instances reports "Metric Collection Error" and every configuration (with Statspack or without, enable metrics or disable them) gives the same message.
I know that EM 11R1 is certified only for 9.2.0.8 but it seems strange that it works for version 9.2.0.1 (even if most features are disabled) and it don't works for the others 9.2 versions.
Someone has the same issue? Any suggestion ?
Thank you for your help.
Alex

Hello,
can you verify if the DBSNMP account is accessible (e.g. account is not locked).
Please have a look at Note:340158.1 for some debugging information around this error.
Regards,
Frank

Ent. Manager is not able to connect to the database instance. ORA-12541

Hi
I have installed and configured Oracle 10.2.0.1 on a Microsoft Cluster with Windows 2003 Server.
Database instance and listener are running OK on both cluster nodes.
On one of the nodes (pwmssrv1) I configured Enterprise Manager to monitor and control the database.
At the beginning it worked fine, but after making a reboot on this server the Enterprise Manager cannot see the database instance and listener anymore.
I already recreated/reinstalled EM and the problem persists.
When I try to access the Oracle EM I get the errors (it do not show the login page):
Database Instance
(it shows the red down arrow)
Host pwmssrv1
Port 1521
SID WMS10
Oracle Home C:\oracle\product\10.2.0\db_1
Listener
(it shows the red down arrow)
Status Down
Host pwmssrv1
Port 1521
Name FSLEFA_BOCWMS_ORA
Oracle Home C:\oracle\product\10.2.0\db_1
Location C:\oracle\product\10.2.0\db_1\network\admin
Details TNS-12541: TNS:no listener
Agent Connection to Instance
(it shows the red down arrow)
Status Failed
Details ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach)
If I do the "emctl status dbconsole" it shows:
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://pwmssrv1.BOCWMS.COM:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in directory C:\oracle\product\10.2.0\db_1/pwmssrv1.BOCWMS.CO
M_wms10/sysman/log
I also look into the logs and it shows a few errors (emoms.log):
2010-02-22 17:09:49,000 [HttpRequestHandler-9300338] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = Io exception: The Network Adapter could not establish the connection
2010-02-22 17:09:56,000 [HttpRequestHandler-22569956] WARN jdbc.ConnectionCache _getConnection.303 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
2010-02-22 17:09:56,000 [HttpRequestHandler-22569956] WARN jdbc.ConnectionCache _getConnection.306 - Io exception: The Network Adapter could not establish the connection
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
2010-02-22 17:09:57,000 [HttpRequestHandler-22569956] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = Io exception: The Network Adapter could not establish the connection
2010-02-22 17:09:57,000 [EMUI_17_09_57_/console/aboutApplication] ERROR em.console doGet.311 - java.lang.IllegalStateException: Response has already been committed
java.lang.IllegalStateException: Response has already been committed
Can someone help me on this problem.
Thanks in advance.
Jose

You need to do some troubleshooting to find exact issue...
Here are some metalink notes,
How to Verify Agent Connectivity to 'OMS and Repository' Target using emrepresp.pl [ID 472292.1]
--Database Status Shows Down Getting Error "Failed to Connect to Database Instance: ORA-12541: TNS:no listener " [ID 402227.1]
--Error While Configuring the Database from the Grid Control Console [ID 750621.1]
Hope this helps,
http://www.oracleracexpert.com/
Oracle RAC Load balancing and failover
http://www.oracleracexpert.com/2010/01/oracle-rac-load-balancing-and-failover.html
Download Oracle Grid Control and ASMLib and Install
http://www.oracleracexpert.com/2009/08/download-oracle-grid-control-and-asmlib.html

SCOM 2012 R2 & Exchange Server 2010 SP3 - Mailbox services not monitored

Having done everything depicted in Exchange Server 2010 MP I still have trouble with some Exchange services - they are in not monitored state (five days passed):
Mailbox All Database Services - Default-First-Site-Name
Mailbox Database Service - Management - test.local
Mailbox Database Service - PublicFolders - test.local
Mailbox Database Service - Users - test.local
Mailbox Many Database Service - Default-First-Site-Name
OfflineAddressBook Service - Default-First-Site-Name
Why is this happening? Since monitoring exchange mailbox databases is one of the most important tasks SCOM should be doing I assume something wrong is going on here. However there are no errors or alerts in SCOM console nor in OpsMgr
log on Exchange server itself.

Hi There,
Did you install the Microsoft Exchange monitoring correletion service while importing the Exchange 2010 management pack ?
Does your MS have RMS Emulator role ? As many alerts in the Exchange 2010 MP are targetted to Root management server class.
Also did you configure Test mailboxex and stuff post Exchange 2010 Import ?
Did you analyse the Ops manager Event logs in the MS and Agent ? Can you post the critical and Warnign events here.
Also is Agent proxy enabled ?
Also is the Action account of the Agents System or Domain account ?
Also refer: http://blogs.catapultsystems.com/jcowan/archive/2013/03/26/opsmgr-2012-and-2007-exchange-server-2010-monitoring-management-pack-how-to-perform-the-optional-configurations-for-synthetic-transactions-and-kerberos-authentication.aspx
Gautam.75801

Listener (and database instance) does not starts up automatically: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor

Hi at all.... I'm a newbie with database oracle.,
I have the follow problem:
I installed Oracle Database 11g R2 XE on my guest operating system CentOS 6.5.
I have changed the hostname in my SO CentOS (where is installed oracle 11g R2 XE) after installation was completed successfully.
-) Before and during installation the hostname was localhost.
-) After installation I changed the hostname in VMCentOS
From the moment I changed the hostname, nothing starts up automatically. In particular, the listener and the database instance does not starts up automatically.
When I starts up the listener manually and I try to connect to database instance with SQLPLUS i get this error:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
I think that the problem is due to the changed hostname because I, for testing and debugging purpose, re-installed a new OS CentOS virtual machine, re-installed oracle database 11g and I have not got that problem. The database instance and the listener starts up automatically!
Can any one tell me if maybe the problem is related to the hostname changed? ... and Why?
P.S.: After changed the hostname I have also modified the listener.ora and the tnsnames.ora by modifying the HOST with the correct hostname.

-) Output of command chkconfig (there isn't any line oracle-xe 0:off   1:off 2:on 3:on 4:on 5:on 6:off):
[oracle@VMCentOS /]$ chkconfig
NetworkManager     0:off    1:off    2:on    3:on    4:on    5:on    6:off
abrt-ccpp          0:off    1:off    2:off    3:on    4:off    5:on    6:off
abrtd              0:off    1:off    2:off    3:on    4:off    5:on    6:off
acpid              0:off    1:off    2:on    3:on    4:on    5:on    6:off
atd                0:off    1:off    2:off    3:on    4:on    5:on    6:off
auditd             0:off    1:off    2:on    3:on    4:on    5:on    6:off
blk-availability    0:off    1:on    2:on    3:on    4:on    5:on    6:off
bluetooth          0:off    1:off    2:off    3:on    4:on    5:on    6:off
cpuspeed           0:off    1:on    2:on    3:on    4:on    5:on    6:off
crond              0:off    1:off    2:on    3:on    4:on    5:on    6:off
cups               0:off    1:off    2:on    3:on    4:on    5:on    6:off
dnsmasq            0:off    1:off    2:off    3:off    4:off    5:off    6:off
firstboot          0:off    1:off    2:off    3:on    4:off    5:on    6:off
haldaemon          0:off    1:off    2:off    3:on    4:on    5:on    6:off
htcacheclean       0:off    1:off    2:off    3:off    4:off    5:off    6:off
httpd              0:off    1:off    2:off    3:off    4:off    5:off    6:off
ip6tables          0:off    1:off    2:on    3:on    4:on    5:on    6:off
iptables           0:off    1:off    2:on    3:on    4:on    5:on    6:off
irqbalance         0:off    1:off    2:off    3:on    4:on    5:on    6:off
jexec              0:off    1:on    2:on    3:on    4:on    5:on    6:off
kdump              0:off    1:off    2:off    3:on    4:on    5:on    6:off
lvm2-monitor       0:off    1:on    2:on    3:on    4:on    5:on    6:off
mdmonitor          0:off    1:off    2:on    3:on    4:on    5:on    6:off
messagebus         0:off    1:off    2:on    3:on    4:on    5:on    6:off
netconsole         0:off    1:off    2:off    3:off    4:off    5:off    6:off
netfs              0:off    1:off    2:off    3:on    4:on    5:on    6:off
network            0:off    1:off    2:on    3:on    4:on    5:on    6:off
ntpd               0:off    1:off    2:off    3:off    4:off    5:off    6:off
ntpdate            0:off    1:off    2:off    3:off    4:off    5:off    6:off
portreserve        0:off    1:off    2:on    3:on    4:on    5:on    6:off
postfix            0:off    1:off    2:on    3:on    4:on    5:on    6:off
psacct             0:off    1:off    2:off    3:off    4:off    5:off    6:off
quota_nld          0:off    1:off    2:off    3:off    4:off    5:off    6:off
rdisc              0:off    1:off    2:off    3:off    4:off    5:off    6:off
restorecond        0:off    1:off    2:off    3:off    4:off    5:off    6:off
rngd               0:off    1:off    2:off    3:off    4:off    5:off    6:off
rsyslog            0:off    1:off    2:on    3:on    4:on    5:on    6:off
saslauthd          0:off    1:off    2:off    3:off    4:off    5:off    6:off
smartd             0:off    1:off    2:off    3:off    4:off    5:off    6:off
snmpd              0:off    1:off    2:off    3:off    4:off    5:off    6:off
snmptrapd          0:off    1:off    2:off    3:off    4:off    5:off    6:off
spice-vdagentd     0:off    1:off    2:off    3:off    4:off    5:on    6:off
sshd               0:off    1:off    2:on    3:on    4:on    5:on    6:off
sysstat            0:off    1:on    2:on    3:on    4:on    5:on    6:off
udev-post          0:off    1:on    2:on    3:on    4:on    5:on    6:off
vmware-tools       0:off    1:off    2:on    3:on    4:on    5:on    6:off
vmware-tools-thinprint    0:off    1:off    2:on    3:on    4:on    5:on    6:off
wdaemon            0:off    1:off    2:off    3:off    4:off    5:off    6:off
winbind            0:off    1:off    2:off    3:off    4:off    5:off    6:off
wpa_supplicant     0:off    1:off    2:off    3:off    4:off    5:off    6:off
[oracle@VMCentOS /]$
Moreover in /etc/sysconfig there isn't any file oracle-xe!!!
At this point, I suspect that something in the installation I mistook.

Livecache Error in SCM5.0 - Database Instance Not Found

Hi,
I installed SCM5.0 SR2 IDES version on Windows 2003. I selected Livecache in SAP System option when installing SCM5.0. After complete installation, I executed MAxDb exe file to install the MaxDb. I get this error when I try to access LCA Monitor in LC10.
Here the error details:
Name and Server:    LCA - SCMSRVR
DBMRFC Function: DBM_CONNECT
Error:                      DBM Error
Return Code:           -4
Error Message:       Database Instance Not Found
It wolud be really helpful if someone could respond to this messgae.
Thanks
Satish

Hello Satish,
-> My assumption was correct. Please see my first reply:
"Please pay attention that the liveCache server software is not supported on the 32bit Windows
server. You could install the liveCache client software on 32 bit Windows server, if the
application running on the 32 bit Windows to be able to communicate to the liveCache instance. The liveCache instance need to be installed on another server, please overview the
PAM matrix or check info at
service.sap.com/liveCache -> Release-Dependent -> SAP LC/LCAPPS 5.0 ->
"Matrix of released OS platforms for SAP liveCache Technology 7.6.0"   "
You need the server, where you could install the liveCache instance.
After the liveCache instance will be installed, you need to follow up with the post installation
Steps from the liveCache installation guide, which you could also display from link
service.sap.com/liveCache -> Release-Dependent -> SAP LC/LCAPPS 5.0
-> "Yes.I found the above two files.
Dbmcli.exe --> Found in the directory /sapdb/programs/pgm
Sdbregview.exe --> Found in the directory /sapdb/programs/bin"
==> You could start the command prompt from those directories & run the recommended
        commands.
      With output of the 'sdbregview -l' command you will get the list of the database packages
      installed on the server.
-> Please see helpful SAP notes ::
               820824     FAQ: MaxDB / SAP liveCache technology
               767598    Available documentation
Thank you and best regards, Natalia Khlopina

SCOM 2007 R2 Root Management server showing Not Monitored State in Ops Mgr Console

Hello Experts,
In my Prod SCOM 2007 R2 environment RMS server state is "Not Monitored", But we are receiving alerts with limitation. By mistakenly I put Maintenance Mode while rebooting RMS server due to slow performance of the server.
Can anybody help me to revert back to the RMS Health state ?

We can identify the Performance Signature Data Collection Rules in this example by executing the following SQL Query. This query should be executed in SQL Management Studio against the Operations Manager database.
-- Return all Performance Signature Collection Rules
Use OperationsManager
select
managementpack.mpname,
rules.rulename
from performancesignature with (nolock)
inner join rules with (nolock)
on rules.ruleid = performancesignature.learningruleid
inner join managementpack with(nolock)
on rules.managementpackid = managementpack.managementpackid
group by managementpack.mpname, rules.rulename
order by managementpack.mpname, rules.rulename
This query will return all Performance Signature Collection Rules and their respective Management Pack name. A column is returned for Management Pack name and Rule name.
The following Performance Monitor Counters on a Management Server will provide information concerning Database and Data Warehouse write action insertion batch size and time. If the batch size is growing larger, for example the default batch size is 5000 items,
this indicates either the Management Server is slow inserting the data to the Database or Data Warehouse, or is receiving a burst of Data Items from the Agents or Gateway Servers.
· OpsMgr DB Write Action Modules(*)\Avg. Batch Size
· OpsMgr DB Write Action Modules(*)\Avg. Processing Time
· OpsMgr DW Writer Module(*)\Avg. Batch Processing Time, ms
· OpsMgr DW Writer Module(*)\Avg. Batch Size
From the Database and Data Warehouse write action account Average Processing Time counter, we can understand how long it takes on average to write a batch of data to the Database and Data Warehouse. Depending upon the amount of time it takes to write a batch
of data to the Database, this may present an opportunity for tuning.
Event ID 2115 A Bind Data Source in Management Group
http://blogs.technet.com/b/kevinholman/archive/2008/04/21/event-id-2115-a-bind-data-source-in-management-group.aspx
Niki Han
TechNet Community Support

10g Enterprise Manager is not able to connect to the database instance

I am running a Oracle 10g database in Solaris 10 server. When i am trying to connect to the enterprise manager it says Enterprise Manager is not able to connect to the database instance.
The database instance is open,the listener is up and the agent connection also says that it succeeded.
The server houses two 10g databases and the EM was working properly till yesterday. Kindly Help.
Thanks in advance.
Ram

Hi,
The EM is started and if i give emctl status dbconsole
-bash-3.00$ emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
http://gladiator:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running
Logs are generated in directory /db8/ora10gr2/product/10.2.0/Db_4/gladiator_TROY/sysman/log
it says that the EM is running. But when i am trying to access the URL it is in IE it says Page cannot be displayed what could be the problem for this???
Thanks in advance.
Ram

Share Point 2013 MP for SCOM 2007 R2 - Not Monitored State

Hi All,
I have imported SharePoint 2013 MP in SCOM 2007 R2 and the sharepoint farm group is in "not monitored" state, moreover only one computer name out of all sharepoint farm servers is being populated in unidentified machines (rest are not being
shown anywhere in Microsoft SharePoint folder).
I have followed all the steps as per installation guide of sharepoint 2013 (foundation & Server) MP. Configured run as account has the farm admin rights.
Please help as it seems discovery is not working properly.
Regards,
Prabh.

Hi,
Hope the below blog be helpful:
Configuring the SharePoint 2013 Management Pack
http://blogs.technet.com/b/kevinholman/archive/2013/05/14/configuring-the-sharepoint-2013-management-pack.aspx
Please go through it.
Regards,
Yan Li
Regards, Yan Li

Enterprise Manager is not able to connect to the database instance. The sta

Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
Listener is shown as unavailable.
lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 27-NOV-2012 11:52:40
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=freds-server.i-surname.co.uk)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 27-NOV-2012 11:50:02
Uptime 0 days 0 hr. 2 min. 37 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /opt/oracle/11g/network/admin/listener.ora
Listener Log File /opt/oracle/diag/tnslsnr/freds-server/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=freds-server)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=freds-server)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "GWORCL.i-surname.co.uk" has 2 instance(s).
Instance "GWORCL", status UNKNOWN, has 1 handler(s) for this service...
Instance "GWORCL", status READY, has 1 handler(s) for this service...
Service "GWORCLXDB.i-status.co.uk" has 1 instance(s).
Instance "GWORCL", status READY, has 1 handler(s) for this service...
The command completed successfully
I suspect that this is not just an OEM issue.
see
Listener working but not working for Enterprise manager oracle 11gr2 Linux.
for configuration files
Edited by: Neill_R on Nov 27, 2012 11:51 AM

This was solved by : Osama_mustafa
in the general questions forum
emca -deconfig dbcontrol db -repos drop
emca -config dbcontrol db -repos create

Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.

Dear all,
I have trouble to connect em console to database instance. My database is 11.2.0.3 and before this I did the patching from version 11.2.0.1, and now i cannot get fully functionality of em console.
error is:
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
It shows that agent is connected, database and listener is up.
I did recreation, dropping and recreating with emca, but no success.
Did anyone have similar problems with em console?
Regards,

You need to first of all, Connect to the Database as SYSDBA (because your were not connected), then start the database (because it is not started).
If you already used the username and password in the command prompt and you are sure that the database is already stared, then you need to set the ORACLE_SID before you open SQLPlus. This is because if SQLPlus does not know the SID you are connecting to, it simply thinks it is not up or has no service hence the message "Connected to an idle instance".

Enterprise manager is not able to connect to database instance

Hi
I am having a problem with Oracle EM. I would appreciate very much if anyone can help me.
I installed Oracle on XP which runs on virtual pc on XP as well. Everything is fine, I can connect to database with sqlplus, and there were no errors during installation.
But the problem is that, when I try to connect to database with EM, it says:
Enterprise manager is not able to connect to database instance . The state of the components are listed below.
Can anoyone help me?

user10637311 wrote:
When you want OEM DB , your existing DB should be created by DBCA or if suppose manually creaed DB then you have to configure that DB to EM by
"emca -config dbcontrol db -repos create". for these two cases istener should be running.
emctl start dbconsole -> to start dbconsole service
emctl status dbconsole-> status of servicesI am sorry, I was looking at $ORACLE_HOME\admin . And in the proper path, both listener.ora and tnsnames.ora do exist.
emca -config dbcontrol db -repos create :
<last part>:
INFO: This operation is being logged at C:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-02-18_02-01-40-AM.log.
Feb 18, 2010 2:02:46 AM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
cl\emca_repos_create_<date>.log for more details.
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2010-02-18_02-01-40-AM.log for more details.
Could not complete the configuration. Refer to the log file at C:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-02-18_02-01-40-AM.log for more deta
ils.
C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
cl\emca_repos_create_<date>.log:
Check if repos user already exists.
old 6: WHERE username=UPPER('&EM_REPOS_USER');
new 6: WHERE username=UPPER('SYSMAN');
old 8: IF ( '&EM_CHECK_TYPE' = 'EXISTS') THEN
new 8: IF ( 'NOT_EXISTS' = 'EXISTS') THEN
old 11: raise_application_error(-20000, '&EM_REPOS_USER does not exists..');
new 11: raise_application_error(-20000, 'SYSMAN does not exists..');
old 14: ELSIF ( '&EM_CHECK_TYPE' = 'NOT_EXISTS' ) THEN
new 14: ELSIF ( 'NOT_EXISTS' = 'NOT_EXISTS' ) THEN
old 17: raise_application_error(-20001, '&EM_REPOS_USER already exists..');
new 17: raise_application_error(-20001, 'SYSMAN already exists..');
old 21: raise_application_error(-20002, 'Invalid Check type &EM_CHECK_TYPE');
new 21: raise_application_error(-20002, 'Invalid Check type NOT_EXISTS');
DECLARE
ERROR at line 1:
ORA-20001: SYSMAN already exists..
ORA-06512: at line 17

Enterprise Manager is not able to connect to the database instance. Open??

Hello there,
After I installed oracle database and tried to start Enterprise Manager, I got the message:
Enterprise Manager is not able to connect to the database instance.
All statuses are OK (green and up) except database instance. It is also green and up but open. (Details: The instance is open.)
Can anyone help me about it?
I use Windows XP x64 with all patches installed. Oracle database R11g x64.
I tried with different database versions and different machines and different OS and loopback adapter and... my EM still want to log in.
I can log in with sqlplus. It accepts any pass for sys (as sysdba). Why?
My log files are available here: http://195.66.185.187/log.zip

You are using a bequeath connection when logging in with SQL*Plus on the server so the password is not validated.
Log in using SQL*Plus this way:
sqlplus /nolog
followed by
conn sys@<service_name> AS SYSDBA
and provide the correct password
My guess it it will fail.
If so then you need to use the correct password and if you don't know what it is set it when logged on as SYS.

SCOM to NOT monitor certain database instances

Similar Messages

Maybe you are looking for