Scope and Proposal preparation for SAP GRC AC Implementation.

Hi ,
I would like to know procedure how the RFP (Request for proposals) are prepared for SAP GRC AC Module implementation. and also how the scope and effort estimation are calculated.
are there any guidelines and checklist are available to be followed.
is there any generic approach followed during SAP GRC AC implementation for proposal as well as for effort estimation.
Pelase clarify my doubts
Regards,
RK

Hi,
Use RTA on SAP BASIS 7.00 System for any system other than ECC which has ABAP and Basis Level 7.00 with Kernel 7.00
I don't see any option for 7.20, may be it will be available later on.
We have SRM connected to GRC so I can cofirm, yes it is possible to connect SRM to GRC and work with SRM rulebook. RTA and Post-RTA activites and JCO and RAR connectors are a must to get it work properly. In fact all configurations are required as it is in ECC system.
No HR RTA is required ,as there is no HR module in SRM.
Regards,
Sabita

Similar Messages

  • Spanish Manual for SAP GRC AC 5.3

    Hello,
    I want to know if someone has an spanish manual for SAP GRC AC 5.3 for the 4 modules (RAR, SPM, CUP & ERM).
    Or if someone knows a link to get them. I need them.
    Thank you in advance.
    Best Regards.
    Pablo mortera.

    Hi Pablo,
    In 5.3 we can use the SPM by two different ways.
    1. FFID based: In this you make a user as a FFID and then you use this FFID to perform all the actions.
    User based roles are for the above.
    3. Role based: In this you assign the roles(maintained in SPM) to the user.
    Role based roles are for above.
    The basic diffeence is in first one you use user (FFID) to perform the activities whereas in second you use role (which are maintained in SPM).
    You can get more details of this in user guide and configuration guide.
    Regards,
    Shweta

  • How to Prepare for SAP PP Certification

    Dear SAP Experts,
    I want to prepare for SAP PP certification without coachng. I am already doing job as Consultant. Please guide me which books will be helpful and what benefit I can get after passing Certification.
    Your Kind feedback will be highly appreciable.
    Regards
    Muhammad Umar

    Dear Umar,
    You will be technically more strong than a fresh person as you are having experience. For more better understanding you can read out following Books
    PLM 114 ( Basic Data for manufacturing)
    SCM 240 ( Production Planning)
    SCM 310
    TSCM  40
    TSCM 42
    Recently, new book has been published by Jawad akhtar. You must read that.It's written awesome and in easy wordings
    Regards
    Qazi Raheel

  • Preparation for SAP HCM Associate Certification Exam

    Hi,
    I am preparing for SAP HCM Associate Certification exam, and I have got only five days in my hand.
    I want to know how can I utilize these five days in preparation very effectively, basically on which portion of the syllabus I must give more importance.
    I also want to know at what level the toughness of the questions are asked in certification weather it is direct questions/tricky questions or just basics questions.
    I have tested my skills in www.daypo.net where I found the questions asked on this website for practice was very tough. I have scored only 34% out of 80 questions.
    Currently I have four materials THR10_1, THR10_2, THR12_1 & THR12_2, is that there will be direct questions from this materials.
    I want to pass the certification.
    Can anyone please help me out.
    Regards,
    Kunal Sinha

    Hi Kunal
    I was going through the questions online, some of them are easy ones and some of them require hands-on experience in SAP HCM,
    I am new to SAP HCM and planning to write the SAP HCM exam soon, The online sample questions for SAP HCM are mostly based on the practical knowledge of configuration, is there a book available through which I can practice real case scenarios so that I can have better understanding of SAP HCM to give the exam. Any suggestions and exam related info is appreciated.
    Please reply.
    Thanks so much
    Ruchi

  • Information on SAP XI and Informatica PowerConnect for SAP.

    Hi all,
    Need information on SAP XI as well as on Informatica and Informatica Powerconnect for SAP .
    Thanks santosh

    Hi,
    XI:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/first%2bstep%2bto%2blearn%2bsap%2bxi%2bor%2bpi
    Informatica:
    BW and Informatica
    Regards
    Patrick

  • "Java and BAPI Technology for SAP" by by Ken Kroes - Is this book useful?

    Howdy partners,
    I've got a 'book' called "Java and BAPI Technology for SAP" by by Ken Kroes, Anil Thakur, Gareth M. deBruyn, Robert Lyfareff.
    Now, does anyone know if the info in this book is still relevant to the modern SAP world? I mean its still talking about ITS and stuff like that?
    Any input will be appreciated.

    With the blue cover? I have one with the something similar title, but it's quite out of date. There was lot of improvement on the Java side.
    So I would prefer something newer from SAP-PRESS. Check the SAP-PRESS site.
    BTW I don't consider ITS as an old technology...it was just integrated recently into WAS 640 to make it more powerful. This is the only available technology, which converts classic Dynpro to Webpage dynamically.
    Peter

  • Issue in Application Module and Enterprise Integration for SAP applications

    Hi,
    When I enabled the Application Module and Enterprise Integration for SAP applications Version 2.60 Patch 2 I am getting error in defect entity and Application Module. Does any one face this issue? Please let me know the solution.
    QC details:  QC 11.0 with patch 7
    I followed the steps given in ALM addin page to install the adapters
    Attached Screen shots of the Error

    Hi
    If you are wanting to know how to configure ESSO to be used to logon to SAP applications then there is a guide in the helpfile of the admin console. Simply do a search for SAP.
    In short ESSO-LM comes with a SAP helper object which needs to be selected on install. To enable the ESSO SAP helper to interact with SAP, the SAP server and the SAPGUI client need to be configured. The details for this are in the helpfile. If you have multiple SAP systems launched from the SAPGUI then this is the best method because it means ESSO can distinguish between the different SAP systems through matching screens
    If you have only one SAP system and you do not want to configure the SAP server then you could use send keys and not use the SAP helper object at all.
    Hope this helps

  • Gathering Technical and Business Requirements for SAP PI

    I need to some documents and tools, or interview guide & questionnaire to gather the stakeholders' technical and business requirements for SAP PI

    Thanks for the links,
    I am quite new at SAP and currently trying to elaborate should i use SAP PI or not based on my project stakeholder's requirements.
    And my biggest problem right now is how to capture technology and business requirements and match them with SAP PI
    I plan to use this format while requirements gathering about integration platform:
    1- Draft Requirements
    Q- What is the names and status of sending and receiving application and how they will be used
    2- Detailed Requirements
    Q- Connectivity, Administrative and Business related questins
    3- Administrative and project management information
    Q- Which applications are involved, who is the original supplier? Who is technical contact at the supplier
    4- Business requirements
    Q- Questions about the information flow which will support some business processes
    5- Connectivity to applications
    Q- Questions about connectivity mechanism, file formats (flat file or XML or something else), data access methods and so on
    What do you think about the general concept?
    Edited by: Alper Celik on Feb 2, 2009 10:37 AM

  • Prerequisites for SAP NW BPM implementation

    Hi All,
    Can you please let me know the prerequisites for SAP NW BPM implementation?
    Also,please let me know the phases in a SAP NW BPM implementation like requirement gathering and subsequent phases.
    Thanks in advance

    Hi,
    You can start with this document Step by Step Guide to SAP NetWeaver Business Process Management - Webinar Replay, and this simple example http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/307336b8-098c-2d10-be9c-d41ae345f0ff?QuickLink=index&…
    Regards.

  • Role Upload template for SAP GRC CUP 5.3

    Good Morning / Afternoon / Evening SAP Security Gurus,
    I am looking to upload end user roles via a role upload template spreadsheet for use in SAP GRC CUP 5.3.  I am referring specifically to the recommended template mentioned in step 11 of the 5.3 Post Installation CUP guide, so that roles can be picked within ERM for workflow.
    According to the guide, it recommends uploading from the backend systems via a spreadsheet - any template versions or advice on finalising this would be most appreciated.
    Best Regards
    Steve

    Thanks Ashish,
    Someone else recommended this option as well via another forum. Have tried it out and working fine. 
    Thanks for the reply
    Steve

  • Tcodes & Roles for SAP GRC AC 5.3 SPM in R/3

    Hello,
    After installing part of the SAP GRC AC 5.3 SPM in the Tcode SAINT (R/3).
    I want to know what Tcodes do I need to use the Tcode /VIRSA/VFAT.
    Or what type of roles do I need. Is there some.
    I have read the PDF "SAP Governance, Risk & Compliance Access Control 5.3 - 02 Post-Installation - SPM.pdf", and I have seen some roles. Are this the standard roles for the SPM in R/3?
    Best Regards.
    Pablo Mortera.

    Hi Pablo,
    In 5.3 we can use the SPM by two different ways.
    1. FFID based: In this you make a user as a FFID and then you use this FFID to perform all the actions.
    User based roles are for the above.
    3. Role based: In this you assign the roles(maintained in SPM) to the user.
    Role based roles are for above.
    The basic diffeence is in first one you use user (FFID) to perform the activities whereas in second you use role (which are maintained in SPM).
    You can get more details of this in user guide and configuration guide.
    Regards,
    Shweta

  • How to Prepare for SAP SD Certification

    Hi All,
    I have applied for SAP SD certification with EhP5 with exam code C_TSCM62_65, I am little nervous regarding preparation.
    Can any one tell me on how to prepare with proper methods to crack SAP SD certification.
    I have 3 years of experience in SAP SD and MM and I have referred  the syllabus from SAP training site.
    Little guidance will help ma a lot.
    Thanks,
    Sokita

    Hi Nouman,
    We are fully aware of this but this does not make it legal, I'm afraid. Using exam patterns and illegal material only undermines the quality of SAP certifications and diminishes the value for people who have honestly prepared for the exams and have fully earned it.
    Additionally, learning exam patterns by heart completely misses the point of becoming certified, because you don't actually gain any new knowledge or go into depth.
    I hope you understand this and I ask you politely to please stop sharing or asking for copyright materials.
    Regards,
    Joey

  • How to prepare for SAP FICO Certification Exam.

    Dear All,
    Can any body would like to tell me on the above cited subject. I have some related querries as below:
    1. Does the certification exam question refer the current SAP FICO Version?
    2. How to prepare for the exam as I do not want to attend the classes but to appear for exam directly.
    3. Is there the model question and answer paper available on sap site or internet.
    4. How to get the relevent SAP FICO books. Is the same available on internet?
    Your's the best reply / suggestions will be appreciated.
    Rgds,
    BABA

    Hi,
    a. Certifications are usually available for latest versions. contact sap education @sap.com for the same.
    b. Am not sure if you could take the exam directly. you need attend academy @ siemens/genovate or work on a sap projects and let your company sponsor you.
    c. http://www.sap-img.com/zf006.htm or http://sap.ittoolbox.com/documents/popular-q-and-a/sap-fi-certification-exam-2114 or http://www.sapprofessionals.org/?q=125_fi_questions_for_certification.
    d. Hi,
    The below link could be good place to start...
    https://www.sdn.sap.com/irj/sdn/wiki
    My Home > ERP Financials > Main &
    My Home > ERP Financials > Main > How-To Guides
    http://www.sap-img.com/sap-fi.htm
    http://tech.groups.yahoo.com/group/ficogroup/
    http://tech.groups.yahoo.com/group/SAPIENT-FICO/
    Rgds.

  • Roles and Authorization strategy for SAP BIBO

    Hello All,
    We are doing an implementation where Source is a Oracle, SAP BI warehouse and BO XI3.1 as reporting solution.
    Our customer has asked for the authorization strategy that will be implemented in SAP BI. Currently the users belong to different companies or plants or countries
    Current structure is like,
    User 1 belongs to Plant1 of Country1
    User 2 belongs to Plant2 of Country2
    user 3 belongs to Plant3 of Country1 etc..     
    We have more than 500 users who will use the reports. The user belonging to a particular plant should only see the plant data/Country data he belongs to.
    As I understand, we need to create the roles in BW and these roles to be imported into BO to use for the row and column level security.
    The options we considered are,
    1. Use Bex queries in BW to with ABAP code in CMOD to identify the user belongs to Plant  1, 2 or 3 and provide necessary authorizations.
    2. Create user groups based on the country or company they belong to and create as many roles as required. This will however impact the maintenance of so many roles in the BI system.
    We are also forced to avoid Bex queries in BW and hence,  trying to connect Multiproviders directly in BO universe.
    How should we go forward in designing the authorization concept? Any better ideas?
    Thanks and Regards,
    Srinivas

    There are two ways which we can implement this kind of authorization based on my knowledge.
    1. Data Security purely at BW
    If the data is secured based on roles and users, there is no  need of additional authorization from BO side except at report and folder level if you go for SAP Authentication.
    Once you use SAP authenication and enable single sign on option in universe connection, the SAP users can access data based on their profile set at BW.
    2. Data Security from BO
    Let's assume that, if nothing is set at BW and every thing to be take care from BO.
    Then you could create one multiple provider for each plant / country. Create one connection for each multiprovider
    Create restrictions (Tools--> Manage Access Restrictions) for each plant/country. There you can change connection names.
    So you would need to create many restrictions for different permutations and combinations.
    I never tries this option with Multiprovider. But It worked well with NON-SAP data.
    Hope this helps!
    Regards
    Gowtham

  • RDBMS and LATFORM SUPPORT for SAP XI

    Hello!
    I would like to know, whether the following RDBMS and PLATFORM SUPPORT-requirements (below) can be realized with SAP XI or not. I will be very thankful if someone can help me by answering of the following questions (if it is possible, Yes/No and with short explanation/comment)
    <b>RDBMS</b>
    a) database accept binary-large-objects (BLOBs) and  be referenced via the relational engine.
    b) standard pre-defined SQL queries and related calculations provided for use with industry standard reporting tools
    c) database monitoring tools be used to manage impending maintenance needs and potential problems and performance impacts (i.e., tool will monitor and detect prior to real problem occurring)
    <b>PLATFORM SUPPORT</b>
    a) Software supported on OS clustered servers  (If mutliple products, please indicate if all are support or list areas where clustering may not be recommended and why)
    b) software supported on HP-UX 11.i V2 (r6) on Itanium
    c) software supported on Windows 2003 sp1 (x64) on AMD Opteron 
    Thank you!
    Regards
    A. Henke

    RDBMS
    a) database accept binary-large-objects (BLOBs) and be referenced via the relational engine. - Better not to include custom objects in the SAP Database. It should be possible.
    b) standard pre-defined SQL queries and related calculations provided for use with industry standard reporting tools, You can try,
    c) database monitoring tools be used to manage impending maintenance needs and potential problems and performance impacts (i.e., tool will monitor and detect prior to real problem occurring) - Many installations use some tool to do monitoring, but SAP standard transactions are sufficient for good monitoring. try to practice them
    PLATFORM SUPPORT
    a) Software supported on OS clustered servers (If mutliple products, please indicate if all are support or list areas where clustering may not be recommended and why) - I think SAP will not support Clusters(except windows cluster, with some support). Your OS/Hardware vendor should support it on SAP environment.
    b) software supported on HP-UX 11.i V2 (r6) on Itanium - Yes, i think
    c) software supported on Windows 2003 sp1 (x64) on AMD Opteron - Yes

Maybe you are looking for

  • Can anyone write script for this

    You need to create a class called ?Account? that represents a bank account. The data describing each account consists of the customer?s account number, name and the current balance. Method shoud be provided to deposit an amount of money and to withdr

  • Is there a way to import iMessage pictures to laptop without saving them to camera roll?

    I send all my pictures from my camera roll to iMessage as soon as I save them. I have over 1000 pictures on there. With out saving them to my camera roll again, is there a way to import them to my laptop? I can get my camera roll images onto my lapto

  • [JS CS3] Releasing Anchored Objects

    Hello, The following script places a libray item as an anchored object... var myDoc = app.documents[0]; var myFrame = app.documents[0].textFrames.item("myTarget"); var myInsertPoint=myFrame.parentStory.paragraphs.item(0).insertionPoints.item(0) var m

  • Am trying to transfer my apps from my iPad to my new iMac computer

    how do i transfer my ipad apps to my imac computer?

  • Font Size Larger in Firefox :(

    Hey I have designed a site and the font size is larger in Firefox than it is in Internet Explorer. Here's the site: Click here for link I have searched everywhere through google to find answers but none worked. Does it have something to do with font