Scope of analysis and use query drill?

Hai Everyone,
I have a hierarchy in my universe
country>region>client town -->client area
Now at reporting level if I keep country>client town>client area in scope of analysis its working fine but when I would like to have the drill in this way i.e region>client town>client area ,here even I don't want drill up from region to country,Its allowing to drill up.
I have tried even by disabling "Use Query Drill " option .
What is the reason behinde it to drill up by creating a new query?
Thanks in advance,
Pujitha

Hi pujitha,
when you define a hierarchy and run a report ,that data is brought into cube. So because of this it's allowing you to drill up
from region to country.
One thing you can do is try query drill. It will actually fire a query on database when you want to drill further (up or down).
Hope it's a helpful post.

Similar Messages

"Use Query Drill" in Webi 4.1 patch 3.1 on BEx query

Hi,
We are working with Webi version 4.1 and creating reports on BEx queries (BW 7.31)
Withn 6 months, BW will be migrated to HANA.
Is it possible to use the option in Webi document "Use Query Drill" on BEX queries when using BICS?
When using HANA, we would like to fetch fresh data from BEx query on HANA with every drill (up or down) step the user makes.
When on HANA, we'd like to keep Webi's microcube as little as possible.
Tx for yr reply,
Jan

Hi Jan,
"query drill" will only work for drill paths that have been created in a UNV or UNX universe. As BICS does not need UNV or UNX, it is not possible to leverage that setting using BICS.
Best regards,
Victor

Scope of analysis

Hi all,
How do I set the "scope of analysis" in WEBI, when I see in my report the icon is in disable mode. Can anyone let me know how to activate and the purspose of the function?
Regards,
Preetham

Hi Preetham,
Scope of analysis button grayed out:
Uncheck the option u201CUse Query Drillu201D (Document Properties) i.e. 3rd option under Document Options. (Right click on the report)
Scope of analysis is used to set the level of drill you want on the report. If you set the hierarchy up to level 5 then you can restrict the drill on this hierarchy to 2 or 3 levels.
I Hope this Helpsu2026.
Thanksu2026
Pratik

SCOPE OF ANALYSIS button Inactive

Hi,
I am trying to use SCOPE OF ANALYSIS in my webi report but the Scope of analysis button is graded out.
I have tried unchecking the "USE QUERY DRILL" under document properties as it was said in one of the threads, But no luck.
Could any one please hellp me through this, How to make SCOPE OF ANALYSIS BUTTON active??
Thank You!

If what Oscar suggests does not work, it may be a permissions issue.
You need to be granted permission to drill at the WebIntelligence Application settings via the CMC

Poor performance with WebI and BW hierarchy drill-down...

Hi
We are currently implementing a large HR solution with BW as backend
and WebI and Xcelcius as frontend. As part of this we are experiencing
very poor performance when doing drill-down in WebI on a BW hierarchy.
In general we are experiencing ok performance during selection of data
and traditional WebI filtering - however when using the BW hierarchy
for navigation within WebI, response times are significantly increasing.
The general solution setup are as follows:
1) Business Content version of the personnel administration
infoprovider - 0PA_C01. The Infoprovider contains 30.000 records
2) Multiprovider to act as semantic Data Mart layer in BW.
3) Bex Query to act as Data Mart Query and metadata exchange for BOE.
All key figure restrictions and calculations are done in this Data Mart
Query.
4) Traditionel BO OLAP universe 1:1 mapped to Bex Data Mart query. No
calculations etc. are done in the universe.
5) WebI report with limited objects included in the WebI query.
As we are aware that performance is an very subjective issues we have
created several case scenarios with different dataset sizes, various
filter criteria's and modeling techniques in BW.
Furthermore we have tried to apply various traditional BW performance
tuning techniques including aggregates, physical partitioning and pre-
calculation - all without any luck (pre-calculation doesn't seem to
work at all as WebI apparently isn't using the BW OLAP cache).
In general the best result we can get is with a completely stripped WebI report without any variables etc.
and a total dataset of 1000 records transferred to WebI. Even in this scenario we can't get
each navigational step (when using drill-down on Organizational Unit
hierarchy - 0ORGUNIT) to perform faster than minimum 15-20 seconds per.
navigational step.
That is each navigational step takes 15-20 seconds
with only 1000 records in the WebI cache when using drill-down on org.
unit hierachy !!.
Running the same Bex query from Bex Analyzer with a full dataset of
30.000 records on lowest level of detail returns a threshold of 1-2
seconds pr. navigational step thus eliminating that this should be a BW
modeling issue.
As our productive scenario obviously involves a far larger dataset as
well as separate data from CATS and PT infoproviders we are very
worried if we will ever be able to utilize hierarchy drill-down from
WebI ?.
The question is as such if there are any known performance issues
related to the use of BW hierarchy drill-down from WebI and if so are
there any ways to get around them ?.
As an alternative we are currently considering changing our reporting
strategy by creating several higher aggregated reports to avoid
hierarchy navigation at all. However we still need to support specific
division and their need to navigate the WebI dataset without
limitations which makes this issue critical.
Hope that you are able to help.
Thanks in advance
/Frank
Edited by: Mads Frank on Feb 1, 2010 9:41 PM

Hi Henry, thank you for your suggestions although i´m not agree with you that 20 seconds is pretty good for that navigation step. The same query executed with BEx Analyzer takes only 1-2 seconds to do the drill down.
Actions
suppress unassigned nodes in RSH1: Magic!! This was the main problem!!
tick use structure elements in RSRT: Done it.
enable query stripping in WebI: Done it.
upgrade your BW to SP09: Has the SP09 some inprovements in relation to this point ?
use more runtime query filters. : Not possible. Very simple query.
Others:
RSRT combination H-1-3-3-1 (Expand nodes/Permanent Cache BLOB)
Uncheck prelimirary Hierarchy presentation in Query. only selected.
Check "Use query drill" in webi properties.
Sorry for this mixed message but when i was answering i tryied what you suggest in relation with supress unassigned nodes and it works perfectly. This is what is cusing the bottleneck!! incredible...
Thanks a lot
J.Casas

"Enable query drill" opt. with multiple DPs launch all when drilling down

Hi folks,
I am using BO XI R2 and i am experiencing a weird behavior.
I have created a report with 11 data providers and the option "Query drill" enabled. The reason is that I have several COUNT DISTINCT measures that need to go to the database when I drill down (not possible to aggregate them). Basicaly, I have one data provider per item where item could be a table or a chart.
Now, when I do a drill down in one of dimensions in the tables/charts, I check the processes in the database and it looks like it is launching all the data providers, not just the one I am doing drill down with, so the performance is very poor. Anyone has experienced this behavior? Am I missing anything?
Thanks in advance

Hi John,
Following information might be helpful in resolving the issue.
You are able to drill only in one dimension in one report tab. The same dimension contained in 2nd report tab based on the same data provider is not drilled.
This is contradictory to what is documented in the product guide. See page 75 of the guide xir2_wi_analysis_en.pdf section 'Query drill and other reports based on the same data provider':
"Query drill and other reports based on the same data provider
If your document contains other reports that contain dimensions on which you drill in query drill mode, these reports are affected because the query drill modifies the dimensions they contain.
Example: Drilling on a dimension that appears in another report If you have two reports based on a query that contains Year, Quarter and Sales Revenue, and you use query drill to drill down to Year = 2001 on the first report, Web Intelligence also filters the data for Year in the second report to include 2001 only.
You can avoid this (at the cost of retrieving duplicate data into Web Intelligence) by creating a new data provider and rebuilding the other report against it. Now when you drill in query drill mode, the other report remains unaffected."
I hope this will help you.
Regards,
Sarbhjeet Kaur

Receiver SOAP Adapter Use Query String

Hello everybody,
I want to include in my Receiver SOAP Adapter the message id as part of the URL String, but I need to include only the MessageId value, if I use the Use Encoded Headers and Use Query String options it includes all the header fields as part of the URL, is there a way to define only the fields that I need?, thanks in advance.
Regards,
Julio Cesar

May be you could try to use adapter specific message attribute "TServerLocation". This will help you set the dynamic URL.
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm
Regards,
Prateek

New document, query drill, scope of analysis, buttons disabled

Hi,
i have many reports, as part of develepment, we are planning to use drill down in some reports, but,when i edit the report in infoview, it is possible to create new document but not in rich client, and it is not posible no edit query in rich client, the button is greyed out, also the drill button, and even the create new document is grayed out.
I read another post that says, is not posible to use scope of analysis if the universe is from BI,so i tought it could be the reason that scope of analysis was greyed out, but did another test with universe e-fashion and it´s exactly the same problem, the buttons -create new query edit query, drill, scope of analysis, are disabled.
I have all the rights in infoview and cmc i have tha administrator account, Could be the problem ..........that we have a temporary license?
Thanks for your help hope to solve it quickly

Hi,
Copy the report from Public folders to your favourites and tryfor drill down or creating a new document. May be your admin team can restrict in QA or PROD generally.
Cheers,
Suresh babu Aluri.

BI 4.0 Interactive Ana;lysis BICS Connection to BEx Query Scope of Analysis

Is there any setting on BEx query that needs to be set for Scope of Analysis to be enabled for hierarchy drilling in Query panel?

You are not able to use scope of analysis in an BI Universe.....if you want to use hierarchie you can define them in the universe manually...and it willl work for drilling options...
Regards

I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Is it necessary to add? If so, how do I add H Tags to iweb.

I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Are they necessary to add? Why would one add these tags and how do I add H Tags to iweb? And are there examples to look at? I am slowly learning about simple web design and assumed that iweb was stand alone without having to write code. Is this one of the reasons iweb is no longer supported? Thanks for looking at this!

A simple text page like this:
Heading
    sub heading
          text paragraph ....
Is traditionally represented by html tags like:
<h1>Heading</h1>
     <h2>sub heading</h2>
          <p>text paragraph ... </p>
I would guess that the use of h1-h6 tags helps search engines to understand the structure of a page as the tags imply a certain structure.
This can be compared to more generic tags like <div> that could represent any kind of content - and may be what iWeb uses (you'll have to check yourself).
I would generally recommend that you use some kind of up to date blog/site building tool, perhaps Wordpress or Squarespace (I haven't used either one myself) that support current web technologies - this should reduce your SEO issues and make it easier to properly support mobile/tablet users.

Dataset query issues twice if the dataset is connected to matrix and used in multilookup function

hello everybody.
could not find any information if this is an intended behavior:
dataset query issues twice if the dataset is connected to matrix and used in multilookup function
parameters in both queries are the same
ssrs: 2008 r2, sharepoint 2010 integrated
sharepoint 2010: september 2014 cu
thanks in advance
Sergey Vdovin

Hello, Wendy.
I prepared a very empty sample report for you to demonstrate the problem - with this report, i hope, there is no place to discuss the shrinking of time data retrieval.
There is one dataset, one parameter and one lookup function. The query is executed twice.
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner" xmlns:cl="http://schemas.microsoft.com/sqlserver/reporting/2010/01/componentdefinition" xmlns="http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition">
<AutoRefresh>0</AutoRefresh>
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>http://t005/ProjectBICenter/DocLib/IntegrationDBVdovin.rsds</DataSourceReference>
<rd:SecurityType>None</rd:SecurityType>
<rd:DataSourceID>7e554344-d6c2-48a5-a7f4-1d24608cb4b5</rd:DataSourceID>
</DataSource>
</DataSources>
<DataSets>
<DataSet Name="DataSet1">
<Query>
<DataSourceName>DataSource1</DataSourceName>
<CommandText>select 1 as temp, '$' as tempname</CommandText>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
</Query>
<Fields>
<Field Name="temp">
<DataField>temp</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
<Field Name="tempname">
<DataField>tempname</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
</Fields>
</DataSet>
</DataSets>
<ReportSections>
<ReportSection>
<Body>
<ReportItems>
<Textbox Name="ReportTitle">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Lookup(1,Fields!temp.Value,Fields!tempname.Value,"DataSet1")</Value>
<Style>
<FontFamily>Verdana</FontFamily>
<FontSize>20pt</FontSize>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:WatermarkTextbox>Title</rd:WatermarkTextbox>
<rd:DefaultName>ReportTitle</rd:DefaultName>
<Top>0mm</Top>
<Height>10.16mm</Height>
<Width>139.7mm</Width>
<Style>
<Border>
<Style>None</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</ReportItems>
<Height>57.15mm</Height>
<Style>
<Border>
<Style>None</Style>
</Border>
</Style>
</Body>
<Width>152.4mm</Width>
<Page>
<PageFooter>
<Height>11.43mm</Height>
<PrintOnFirstPage>true</PrintOnFirstPage>
<PrintOnLastPage>true</PrintOnLastPage>
<Style>
<Border>
<Style>None</Style>
</Border>
</Style>
</PageFooter>
<PageHeight>29.7cm</PageHeight>
<PageWidth>21cm</PageWidth>
<LeftMargin>2cm</LeftMargin>
<RightMargin>2cm</RightMargin>
<TopMargin>2cm</TopMargin>
<BottomMargin>2cm</BottomMargin>
<ColumnSpacing>0.13cm</ColumnSpacing>
<Style />
</Page>
</ReportSection>
</ReportSections>
<ReportParameters>
<ReportParameter Name="ReportParameter1">
<DataType>String</DataType>
<DefaultValue>
<Values>
<Value>1</Value>
</Values>
</DefaultValue>
<Prompt>ReportParameter1</Prompt>
<ValidValues>
<DataSetReference>
<DataSetName>DataSet1</DataSetName>
<ValueField>temp</ValueField>
<LabelField>tempname</LabelField>
</DataSetReference>
</ValidValues>
</ReportParameter>
</ReportParameters>
<rd:ReportUnitType>Mm</rd:ReportUnitType>
<rd:ReportServerUrl>http://t005/ProjectBICenter</rd:ReportServerUrl>
<rd:ReportID>cd1262ef-eca7-4739-a2ce-d3ca832d5cd6</rd:ReportID>
</Report>
Sergey Vdovin

Anyone know how to repair a corrupted .DMG file? I recovered the file using Disk Drill. There are actually 4-6 files I have encrypted into a DMG - now they are back on my desktop (deleted them months ago) and the size is correct (between 500-900 MB each)

I deleted several .mov files a while back that were encrypted into a .dmg file. Using Disk Drill, I was able to recover 5 of these files, roughly 500-900 MB each and successfully moved them to my desktop. When I try to open the .dmg file, the dreaded error message "no mountable file systems" shows up. I have tried various fixes based on searches and none have worked. Are these files just corrupted and unreadable, or is there a way to fix?

Thanks for the obvious question. I mean it. The very same thought came to me this morning and, sure enough, I had booted into another drive--my old one that, of course, had the old desktop, etc.
It didn't dawn on me that this was the case since I hadn't set it as a boot drive but I guess in the course of all the restarts I did, it got switched.
I'm back to normal again.

How to collect physical and logical disk counters using query?

Hai friends, i want to view physical and logical disk counters in sql server like Avg. Disk sec/Read, Avg.
Disk Bytes/Read, Avg. Disk sec/Write, Avg.
Disk Bytes/Write, etc., Can anyone tell me how to vies this by using query?
Thanks in advance..

Hai friends, i want to view physical and logical disk counters in sql server like Avg. Disk sec/Read, Avg.
Disk Bytes/Read, Avg. Disk sec/Write, Avg.
Disk Bytes/Write, etc., Can anyone tell me how to vies this by using query?
Thanks in advance..
Hello,
Sys.dm_os_performance counter will only show counters related to SQL server not Physical disk if you run below query in SQL server it will not return any value so no disk counter is present.You will have to see it using perfmon.
select * from sys.dm_os_performance_counters where counter_name like '%disk%'
This can also be done through power shell but I dont have experience with that.You can search net for power shell query to see Windows perfmon counters
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

How to use SOA Suite in conjunction with SOA Analysis and Design Tools

Hi everybody,
I am a novice in this field and I need some help regarding integrating analysis and design tools with SOA Suite.
We used to analyze and design with Oracle Designer and use its powerful form generator to develop a system. It almost covered all the software lifecycle and kept the traceability between anlaysis,design and implementation.
I have studied about the SOA concepts and read some papaer about SOA Suite. I have also installed the SOA demo based on SOA Suite and I found it absolutely amazing, but my problem is that It seems oracle does not have any tools for SOA Analysis and Design. am I right? if so, How can we analyze and design a system based on SOA concepts and implement it using soa suite in such a way that keeps traceability? What tools is used for this purpose?
It seems that IBM have some tools like Rational Software Architect and Rational Suite which enable people to design and analyze based on SOA concepts and then generates some pieces of code (like oracle designer in old days) but is it possible to design in these tools and then generating codes for SOA Suite ? (for example generating a bpel file from a design model)
As I told before I am a novice in this field and I would be so grateful if other users can share their expriences regarding this matter.
Any help would be highly appreciated.
Thanks in advance,
Navid

Learn About All Things SOA:: SOA India 2007:: IISc, Bangalore (Nov 21-23)
Aligning IT systems to business needs and improving service levels within the constraints of tight budgets has for long been the topmost challenge for CIOs and IT decision makers. Service-oriented Architecture (SOA) provides a proven strategy to clearly address both of these objectives. Creating more agile information systems and making better use of existing infrastructure are two leading factors that are boosting SOA adoption across large, medium, and small Indian industries from the BFSI, Retail, Telecom, Manufacturing, Pharma, Energy, Government and Services verticals in India. If you are an IT decision maker belonging to any of these verticals, SOA India 2007 (IISc, Bangalore, Nov 21-23 2007) presents a unique opportunity to gather cutting-edge business and technical insights on SOA and other related areas such as BPM, BPEL, Enterprise 2.0, SaaS, MDM, Open Source, and more.
At SOA India 2007, acclaimed SOA analysts, visionaries, and industry speakers from across the world will show you how to keep pace with change and elevate your IT infrastructure to meet competition and scale effectively. The organisers are giving away 100 FREE tickets worth INR 5000 each to the first 100 qualified delegates belonging to the CxO/IT Decision Maker/Senior IT Management profile, so hurry to grab this opportunity to learn about all things SOA. You can send your complete details, including your designation, e-mail ID, and postal address directly to Anirban Karmakar at [email protected] to enrol in this promotion that is open until 12 October 2007.
SOA India 2007 will also feature two half-day workshops on SOA Governance (by Keith Harrison-Broninski) and SOA Architecture Deep Dive (by Jason Bloomberg). If you are an IT manager, software architect, project leader, network & infrastructure specialist, or a software developer, looking for the latest information, trends, best practices, products and solutions available for building and deploying successful SOA implementations, SOA India 2007’s technical track offers you immense opportunities.
Speakers at SOA India include:
•     Jason Bloomberg, Senior Analyst & Managing Partner, ZapThink LLC
•     Keith Harrison-Broninski, Independent consultant, writer, researcher, HumanEdJ
•     John Crupi, CTO, JackBe Corporation
•     Sandy Kemsley, Independent BPM Analyst, column2.com
•     Prasanna Krishna, SOA Lab Director, THBS
•     Miko Matsumara, VP & Deputy CTO, SoftwareAG
•     Atul Patel, Head MDM Business, SAP Asia Pacifc & Japan
•     Anil Sharma, Staff Engineer, BEA Systems
•     Coach Wei, Chairman & CTO, Nexaweb
•     Chaitanya Sharma, Director EDM, Fair Isaac Corporation
A partial list of the sessions at SOA India 2007 include:
•     EAI to SOA: Radical Change or Logical Evolution?
•     BPEL: Strengths, Limitations & Future!
•     MDM: Jumpstart Your SOA Journey
•     Governance, Quality, and Management: The Three Pillars of SOA Implementations
•     Building the Business Case for SOA
•     Avoiding SOA Pitfalls
•     SOA Governance and Human Interaction Management
•     Business Intelligence, BPM, and SOA Handshake
•     Enterprise 2.0: Social Impact of Web 2.0 Inside Organizations
•     Web 2.0 and SOA – Friends or Foe?
•     Achieving Decision Yield across the SOA-based Enterprise
•     Governance from day one
•     Demystifying Enterprise Mashups
•     Perfecting the Approach to Enterprise SOA
•     How to Build Cost Effective SOA. “Made in India” Really Works!
For more information, log on to http://www.soaindia2007.com/.

Pass username and password adfs without using query string

pass username and password ADFS without using query string, Please help.
I used query string , but it is unsecured to pass credentials over url, with simple tool like httpwatch , anyone can easily get the password and decrypt it.

Hello MohitJainMJ,
You're not in the right forum. Here it's for FIM topics!
Regards,
Sylvain

Scope of analysis and use query drill?

Similar Messages

Maybe you are looking for