Scope of analysis is not available

Hallo
I have Webi 3.1 and Univerce on Bex Query .
Problem consist of Scope of analysis . Button of Scope of analysis in Web document is grey .
Maybe it was nessesary Univerce on Infocube doing ?
Thank you.

pls see the following post:
SCOPE OF ANALYSIS button Inactive
scope of analysis
Scope of analysis
rgs,
Parth.
Edited by: Partho Mukherjee on Nov 7, 2011 12:40 PM

Similar Messages

Ad hoc analysis not available in Smart View Panel after connect with LDAP

Hi everyone,
Ad hoc analysis is not available when connecting to Smart View in excel with LDAP users . However with native users it works properly.
Product:
Hyperion 11.1.2.2 (Essbase, Shared Services)
log: appserver.log:
[2013-10-07T20:26:01.280+01:00] [AnalyticProviderServices0] [ERROR] [] [oracle.EPMOHPS] [tid: 44] [ecid: disabled,0] [APP: APS] [SID: 78068AE3305D7D9141156C174F65E4] [[
java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
        at java.lang.reflect.Method.invoke(Method.java:611)
        at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:282)
        at org.apache.commons.digester.CallMethodRule.end(CallMethodRule.java:626)
        at org.apache.commons.digester.Rule.end(Rule.java:253)
        at org.apache.commons.digester.Digester.endElement(Digester.java:1222)
        at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
        at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
        at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
        at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
        at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
        at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
        at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
        at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
        at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
        at org.apache.commons.digester.Digester.parse(Digester.java:1785)
        at com.essbase.smartview.xml.XmlHandler.invoke(Unknown Source)
        at com.essbase.smartview.xml.XmlHandler.invoke(Unknown Source)
        at com.essbase.smartview.xml.XmlHandler.invoke(Unknown Source)
        at com.essbase.smartview.xml.EssbaseSmartView.doPost(Unknown Source)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:738)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
        at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1657)
        at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1597)
        at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:131)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(AccessController.java:310)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:188)
        at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:116)
        at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:77)
        at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:908)
        at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:934)
        at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:502)
        at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java:181)
        at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:91)
        at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:864)
        at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1592)
        at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:186)
        at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:452)
        at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:511)
        at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:305)
        at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:83)
        at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
        at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
        at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
        at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
        at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:204)
        at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:775)
        at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:905)
        at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1646)
Caused by: java.lang.NoClassDefFoundError: org.apache.commons.pool.KeyedPoolableObjectFactory
        at java.lang.J9VMInternals.verifyImpl(Native Method)
        at java.lang.J9VMInternals.verify(J9VMInternals.java:72)
        at java.lang.J9VMInternals.initialize(J9VMInternals.java:134)
        at com.hyperion.css.spi.impl.ldap.JNDIHelper.getURLContext(JNDIHelper.java:355)
        at com.hyperion.css.spi.impl.ldap.JNDIHelper.getURLContext(JNDIHelper.java:342)
        at com.hyperion.css.spi.impl.ldap.LDAPProvider.authenticate(LDAPProvider.java:356)
        at com.hyperion.css.facade.impl.CSSAbstractAuthenticator.authenticateUser(CSSAbstractAuthenticator.java:613)
        at com.hyperion.css.facade.impl.CSSAPIAuthenticationImpl.authenticate(CSSAPIAuthenticationImpl.java:69)
        at com.hyperion.css.facade.impl.CSSAPIImpl.authenticate(CSSAPIImpl.java:102)
        at com.hyperion.css.facade.CSSAPIFacade.authenticate(CSSAPIFacade.java:119)
        at com.hyperion.dsf.server.framework.HyperionCss.authenticate(Unknown Source)
        at com.hyperion.dsf.server.framework.HyperionCss.authenticateUser(Unknown Source)
        at com.essbase.smartview.provider.EdsProviderImpl.getCssToken(Unknown Source)
        at com.essbase.smartview.admin.CSSProvider.initializeAndRetrieveCssToken(Unknown Source)
        at com.essbase.smartview.admin.EssbaseProvider.openApplication(Unknown Source)
        at com.essbase.smartview.admin.ApsHandler.openApplication(Unknown Source)
        ... 57 more
Caused by: java.lang.ClassNotFoundException: org.apache.commons.pool.KeyedPoolableObjectFactory
        at java.net.URLClassLoader.findClass(URLClassLoader.java:434)
        at com.ibm.ws.bootstrap.ExtClassLoader.findClass(ExtClassLoader.java:191)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:660)
        at com.ibm.ws.bootstrap.ExtClassLoader.loadClass(ExtClassLoader.java:111)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:626)
        at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:62)
        at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:58)
        at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:511)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:626)
        ... 73 more
Thanks in advance

Hi everyone,
Ad hoc analysis is not available when connecting to Smart View in excel with LDAP users . However with native users it works properly.
Product:
Hyperion 11.1.2.2 (Essbase, Shared Services)
log: appserver.log:
[2013-10-07T20:26:01.280+01:00] [AnalyticProviderServices0] [ERROR] [] [oracle.EPMOHPS] [tid: 44] [ecid: disabled,0] [APP: APS] [SID: 78068AE3305D7D9141156C174F65E4] [[
java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
        at java.lang.reflect.Method.invoke(Method.java:611)
        at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:282)
        at org.apache.commons.digester.CallMethodRule.end(CallMethodRule.java:626)
        at org.apache.commons.digester.Rule.end(Rule.java:253)
        at org.apache.commons.digester.Digester.endElement(Digester.java:1222)
        at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
        at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
        at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
        at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
        at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
        at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
        at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
        at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
        at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
        at org.apache.commons.digester.Digester.parse(Digester.java:1785)
        at com.essbase.smartview.xml.XmlHandler.invoke(Unknown Source)
        at com.essbase.smartview.xml.XmlHandler.invoke(Unknown Source)
        at com.essbase.smartview.xml.XmlHandler.invoke(Unknown Source)
        at com.essbase.smartview.xml.EssbaseSmartView.doPost(Unknown Source)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:738)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
        at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1657)
        at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1597)
        at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:131)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(AccessController.java:310)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:188)
        at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:116)
        at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:77)
        at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:908)
        at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:934)
        at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:502)
        at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java:181)
        at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:91)
        at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:864)
        at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1592)
        at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:186)
        at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:452)
        at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:511)
        at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:305)
        at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:83)
        at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
        at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
        at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
        at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
        at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:204)
        at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:775)
        at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:905)
        at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1646)
Caused by: java.lang.NoClassDefFoundError: org.apache.commons.pool.KeyedPoolableObjectFactory
        at java.lang.J9VMInternals.verifyImpl(Native Method)
        at java.lang.J9VMInternals.verify(J9VMInternals.java:72)
        at java.lang.J9VMInternals.initialize(J9VMInternals.java:134)
        at com.hyperion.css.spi.impl.ldap.JNDIHelper.getURLContext(JNDIHelper.java:355)
        at com.hyperion.css.spi.impl.ldap.JNDIHelper.getURLContext(JNDIHelper.java:342)
        at com.hyperion.css.spi.impl.ldap.LDAPProvider.authenticate(LDAPProvider.java:356)
        at com.hyperion.css.facade.impl.CSSAbstractAuthenticator.authenticateUser(CSSAbstractAuthenticator.java:613)
        at com.hyperion.css.facade.impl.CSSAPIAuthenticationImpl.authenticate(CSSAPIAuthenticationImpl.java:69)
        at com.hyperion.css.facade.impl.CSSAPIImpl.authenticate(CSSAPIImpl.java:102)
        at com.hyperion.css.facade.CSSAPIFacade.authenticate(CSSAPIFacade.java:119)
        at com.hyperion.dsf.server.framework.HyperionCss.authenticate(Unknown Source)
        at com.hyperion.dsf.server.framework.HyperionCss.authenticateUser(Unknown Source)
        at com.essbase.smartview.provider.EdsProviderImpl.getCssToken(Unknown Source)
        at com.essbase.smartview.admin.CSSProvider.initializeAndRetrieveCssToken(Unknown Source)
        at com.essbase.smartview.admin.EssbaseProvider.openApplication(Unknown Source)
        at com.essbase.smartview.admin.ApsHandler.openApplication(Unknown Source)
        ... 57 more
Caused by: java.lang.ClassNotFoundException: org.apache.commons.pool.KeyedPoolableObjectFactory
        at java.net.URLClassLoader.findClass(URLClassLoader.java:434)
        at com.ibm.ws.bootstrap.ExtClassLoader.findClass(ExtClassLoader.java:191)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:660)
        at com.ibm.ws.bootstrap.ExtClassLoader.loadClass(ExtClassLoader.java:111)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:626)
        at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:62)
        at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:58)
        at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:511)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:626)
        ... 73 more
Thanks in advance

Merge clip via audio synch option not available?

The dialog box which should hypothetically allow me to merge device-captured audio to DSLR footage via an audio waveform analysis is not available. I'm using CC6, totally up to date, so why is this feature not included?

I finally got it to work. I had to select the Realtek Digital Output, disable the Speakers option and then restart iTunes.

WEBI 4.1 Scope of Analysis panel is Disabled with OLAP Univers Connection

Hello All,
I am facing an Issue with Web intelligence 4.1 that the Scope of analysis panel is disabled although I have created a hierarchy in my OLAP universe connection but also it is disabled, so please there is any way to enable the scope of analysis panel and use hierarchy from OLAP universe connection this will solve my issues with drill down webi reports.
BOBJ version is 4.1 and BW version is NetWeaver 7.4
Please advice

HI Tarek Badr.
Unfortunately the Scope of Analysis Feature is not available for OLAP.It would be grayed out.
The hierachies should be defined in the source system if you want the tree drill down like a parent child hierearchy..but if you just need drillling you can defined custom hierachies in the universe and use drilling in the report but u wont define the scope of analysis in any case..
BR
Prabhith

Error on extend an internal table, but the required space was not available

Hi All,
I am trying to retrieve cost data from COVP tables, as well as the quantity, cost centre, and price unit fields from MSEG / BSEG tables. Thing is, if the AWTYP value in COVP table = 'MKPF', i have to get the data from MSEG, otherwise, I need to get it from BSEG table.
I kept getting this error message:
<i>You attempted to extend an internal table, but the required space was not available.</i>
Anyone have any idea how to make my codes more efficient?
Please help. Thanks!
Regards,
Cecilia
REPORT ZMISCY004.
TABLES : COVP, BSIS, BSEG, MSEG, MAKT, CSKU.
PARAMETERS :
P_FILE(300) DEFAULT '\sapdcdatasaprptoh.txt' LOWER CASE.
DATA MSG_TEXT(50).
DATA :
XKOKRS LIKE COVP-KOKRS,
XBELNR LIKE COVP-BELNR,
XBUZEI LIKE COVP-BUZEI,
XGJAHR LIKE COVP-GJAHR,
XPERIO LIKE COVP-PERIO,
XWKGBTR LIKE COVP-WKGBTR,
XWTGBTR LIKE COVP-WTGBTR,
XREFBN LIKE COVP-REFBN,
XREFBZ LIKE COVP-REFBZ,
XKSTAR LIKE COVP-KSTAR,
XBEKNZ LIKE COVP-BEKNZ,
XMATNR LIKE COVP-MATNR,
XBUKRS LIKE COVP-BUKRS,
XREFGJ LIKE COVP-REFGJ,
XREFBK LIKE COVP-REFBK,
XLTEXT LIKE CSKU-LTEXT,
XMAKTX LIKE MAKT-MAKTX,
XAWTYP LIKE COVP-AWTYP,
XTWAER LIKE COVP-TWAER,
XSGTXT LIKE COVP-SGTXT,
BSEG_KOSTL LIKE BSEG-KOSTL,
BSEG_MEINS LIKE BSEG-MEINS,
BSEG_MENGE LIKE BSEG-MENGE,
MSEG_KOSTL LIKE MSEG-KOSTL,
MSEG_MENGE LIKE MSEG-MENGE,
MSEG_MEINS LIKE MSEG-MEINS.
DATA : BEGIN OF ITAB_COVP OCCURS 10,
KOKRS LIKE COVP-KOKRS,
BELNR LIKE COVP-BELNR,
BUZEI LIKE COVP-BUZEI,
GJAHR LIKE COVP-GJAHR,
PERIO LIKE COVP-PERIO,
WKGBTR(15) TYPE C,
WTGBTR(15) TYPE C,
REFBN LIKE COVP-REFBN,
REFBZ(3) TYPE C,
KSTAR LIKE COVP-KSTAR,
BEKNZ LIKE COVP-BEKNZ,
MATNR LIKE COVP-MATNR,
BUKRS LIKE COVP-BUKRS,
REFGJ LIKE COVP-REFGJ,
REFBK LIKE COVP-REFBK,
LTEXT LIKE CSKU-LTEXT,
MAKTX LIKE MAKT-MAKTX,
AWTYP LIKE COVP-AWTYP,
TWAER LIKE COVP-TWAER,
SGTXT LIKE COVP-SGTXT,
BSIS_WRBTR(13) TYPE C,
BSEG_KOSTL LIKE BSEG-KOSTL,
BSEG_MEINS LIKE BSEG-MEINS,
BSEG_MENGE LIKE BSEG-MENGE,
MSEG_KOSTL LIKE MSEG-KOSTL,
MSEG_MENGE LIKE MSEG-MENGE,
MSEG_MEINS LIKE MSEG-MEINS.
DATA : END OF ITAB_COVP.
SELECT M1~KOKRS
       M1~BELNR
       M1~BUZEI
       M1~GJAHR
       M1~PERIO
       M1~WKGBTR
       M1~WTGBTR
       M1~REFBN
       M1~REFBZ
       M1~KSTAR
       M1~BEKNZ
       M1~MATNR
       M1~BUKRS
       M1~REFGJ
       M1~REFBK
       M1~AWTYP
       M1~TWAER
       M1~SGTXT
       M4~KOSTL
       M4~MENGE
       M4~MEINS
INTO (XKOKRS,
      XBELNR,
      XBUZEI,
      XGJAHR,
      XPERIO,
      XWKGBTR,
      XWTGBTR,
      XREFBN,
      XREFBZ,
      XKSTAR,
      XBEKNZ,
      XMATNR,
      XBUKRS,
      XREFGJ,
      XREFBK,
      XAWTYP,
      XTWAER,
      XSGTXT,
      MSEG_KOSTL,
      MSEG_MENGE,
      MSEG_MEINS
FROM COVP AS M1
LEFT OUTER JOIN MSEG AS M4
ON M1~REFBN = M4~MBLNR AND M1~REFBZ = M4~ZEILE AND M1~REFGJ = M4~MJAHR
WHERE M1~SCOPE = 'OCOST' AND M1~AWTYP = 'BKPF'
OR M1~SCOPE = 'OCOST' AND M1~AWTYP = 'MKPF'
OR M1~KSTAR = '972022'.
IF XAWTYP = 'BKPF'.
SELECT KOSTL MENGE MEINS INTO (BSEG_KOSTL, BSEG_MENGE, BSEG_MEINS) FROM
BSEG WHERE BELNR = XREFBN AND BUZEI = XREFBZ AND GJAHR = XREFGJ AND
BUKRS = XREFBK.
ENDSELECT.
MOVE BSEG-KOSTL TO BSEG_KOSTL.
MOVE BSEG-MEINS TO BSEG_MEINS.
MOVE BSEG-MENGE TO BSEG_MENGE.
ELSE.
MOVE ' ' TO BSEG_KOSTL.
MOVE ' ' TO BSEG_MEINS.
MOVE ' ' TO BSEG_MENGE.
ENDIF.
*GET LTEST
SELECT LTEXT INTO XLTEXT
FROM CSKU
WHERE KTOPL = 'COAA' AND SPRAS = 'EN'.
*GET MAKTX
IF XMATNR <> ' '.
SELECT SINGLE * FROM MAKT WHERE MATNR = XMATNR.
MOVE MAKT-MAKTX TO XMAKTX.
ELSE.
MOVE ' ' TO XMAKTX.
ENDIF.
MOVE : XKOKRS TO ITAB_COVP-KOKRS,
       XBELNR TO ITAB_COVP-BELNR,
       XBUZEI TO ITAB_COVP-BUZEI,
       XGJAHR TO ITAB_COVP-GJAHR,
       XPERIO TO ITAB_COVP-PERIO,
       XWKGBTR TO ITAB_COVP-WKGBTR,
       XWTGBTR TO ITAB_COVP-WTGBTR,
       XREFBN TO ITAB_COVP-REFBN,
       XREFBZ TO ITAB_COVP-REFBZ,
       XKSTAR TO ITAB_COVP-KSTAR,
       XBEKNZ TO ITAB_COVP-BEKNZ,
       XMATNR TO ITAB_COVP-MATNR,
       XBUKRS TO ITAB_COVP-BUKRS,
       XREFGJ TO ITAB_COVP-REFGJ,
       XREFBK TO ITAB_COVP-REFBK,
       XLTEXT TO ITAB_COVP-LTEXT,
       XMAKTX TO ITAB_COVP-MAKTX,
       XAWTYP TO ITAB_COVP-AWTYP,
       XTWAER TO ITAB_COVP-TWAER,
       XSGTXT TO ITAB_COVP-SGTXT,
       BSEG_KOSTL TO ITAB_COVP-BSEG_KOSTL,
       BSEG_MEINS TO ITAB_COVP-BSEG_MEINS,
       BSEG_MENGE TO ITAB_COVP-BSEG_MENGE,
       MSEG_KOSTL TO ITAB_COVP-MSEG_KOSTL,
       MSEG_MENGE TO ITAB_COVP-MSEG_MENGE,
       MSEG_MEINS TO ITAB_COVP-MSEG_MEINS.
APPEND ITAB_COVP.
CLEAR ITAB_COVP.
ENDSELECT.
ENDSELECT.
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
IF SY-SUBRC NE 0.
   WRITE: 'File cannot be opened. Reason:', MSG_TEXT.
   EXIT.
ENDIF.
LOOP AT ITAB_COVP.
TRANSFER ITAB_COVP TO P_FILE.
ENDLOOP.
CLOSE DATASET P_FILE.

Cecilia - I think your problemn is a nested select:
*GET LTEST
SELECT ltext INTO xltext
FROM csku
WHERE ktopl = 'COAA' AND spras = 'EN'.
*GET MAKTX
    IF xmatnr <> ' '.
      SELECT SINGLE * FROM makt WHERE matnr = xmatnr.
      MOVE makt-maktx TO xmaktx.
    ELSE.
      MOVE ' ' TO xmaktx.
    ENDIF.
    MOVE : xkokrs TO itab_covp-kokrs,
                 etc.
          mseg_meins TO itab_covp-mseg_meins.
    APPEND itab_covp.
    CLEAR itab_covp.
ENDSELECT.
Do you need to do the inner select for every cost element text?
Rob

Service Not Available error with SSAS cube

Hi,
We imported Microsoft Analysis Services (SSAS) Cube into RPD using XMLA. While using the drill down feature in BI answers using presentation hierarchies, OBIEE is generating the following error
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: URL: http://<server>/<app name>/msmdpump.dll. The http return status is 503.< html><head><title>Service Not Available</title></head><body>Service Not Available</body></html>
However, drill down feature is working fine with attribute columns. Also the report is working fine up to certain level of drill down. In the log it is evident that OBIEE is generating multiple physical queries (with clause) to pull the data from the cube.
Is there any limit on the size of the mdx or number of mdx queries that msmdpump.dll can process? Is there any configuration that needs to be modified while working with SSAS cubes?
OBIEE version: 11.1.1.6.2 BP1
Much appreciate your time.

Hi Dhar,
Thanks for your reply.
Yes, your observation is correct. Changing the type of the hierarchies has some effect on the issue. I'm able to drill down to few more levels as the MDX generated by OBIEE in this less complex. But ultimately I'm facing the same issue after certain stage. I can only think of, the number of physical queries generated by OBIEE, as one of the possible reason for this. What is your opinion?
Interestingly, I tested the same RPD in 11.1.1.6.5 and I'm unable to reproduce in the issue so far in my testing . Is it a bug in 11.1.1.6.2?! However, upgrading to 11.1.1.6.5 is not an option for us at this stage.
Were you able to resolve the issue completely by only changing the hierarchy type? What version you have used in you project?
Thanks.

JSF Deployment error - login.faces not available

I am new to JSF and am having deploying my first example JSF pages in Eclipse on default Tomcat (6.x).
I feel I have done everything stated in the tutorial http://www.exadel.com/tutorial/jsf/jsftutorial-kickstart.html (I did not repeat the step by step instructions in the tutorial - instead, used these instructions to create my own pages / logic). However, I still get the following error:
HTTP Status 404 - /reportwriter/pages/login.faces
type Status report
message /reportwriter/pages/login.faces
description The requested resource (/reportwriter/pages/login.faces) is not available.
Here is my directory structure:
reportwriter
- src
- LoginBean
- LoginServer.java
- Resources.properties
- js
- html
- images
- pages
- login.jsp
- webRoot
- WEB-INF
- lib
- faces-config.xml
- web.xml
- index.jsp with a one line jsp forward to pages/login.faces
here is my faces-config.xml
<?xml version="1.0"?>
<!DOCTYPE faces-config PUBLIC
"-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN"
"http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
<faces-config>
<application>
<message-bundle>LoginBean.Resources</message-bundle>
<locale-config>
<default-locale>en</default-locale>
<supported-locale>en-us</supported-locale>
<supported-locale>fr</supported-locale>
<supported-locale>es</supported-locale>
</locale-config>
<view-handler>com.sun.facelets.FaceletViewHandler</view-handler>
</application>
<navigation-rule>
<from-view-id>/pages/login.jsp</from-view-id>
<navigation-case>
<description>Handle case for successful login</description>
<from-action>#{loginServer.loginAction}</from-action>
<from-outcome>success</from-outcome>
<to-view-id>/pages/task.jsp</to-view-id>
</navigation-case>
<navigation-case>
<description>Handle case for unsuccessful login</description>
<from-action>#{loginServer.loginAction}</from-action>
<from-outcome>failure</from-outcome>
<to-view-id>/pages/failure.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<navigation-rule>
<from-view-id>/pages/success.jsp</from-view-id>
<navigation-case>
<from-outcome>return</from-outcome>
<to-view-id>/pages/login.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<navigation-rule>
<from-view-id>/pages/failure.jsp</from-view-id>
<navigation-case>
<from-outcome>return</from-outcome>
<to-view-id>/pages/login.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<managed-bean>
<managed-bean-name>loginServer</managed-bean-name>
<managed-bean-class>LoginBean.LoginServer</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
</faces-config>
and here is web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="2.4" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>server</param-value>
</context-param>
<context-param>
<param-name>javax.faces.CONFIG_FILES</param-name>
<param-value>/WEB-INF/faces-config.xml</param-value>
</context-param>
<context-param>
<param-name>javax.faces.DEFAULT_SUFFIX</param-name>
<param-value>.xhtml</param-value>
</context-param>
<listener>
<listener-class>com.sun.faces.config.ConfigureListener</listener-class>
</listener>

<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>

<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>*.faces</url-pattern>
</servlet-mapping>
</web-app>
Can you think what I may be missing here to get the login.faces not available error?
One hint I have is - if I do not set a jsp forward line in the index.jsp file, I get the server deployment for the index.jsp file OK. But not when I have the forward from index.jsp to /pages/login.faces
I also tried setting the context in tomcat server.xml file as follows:
<Context debug="0"
docBase="C:/evsapi/ReportWriter/reportwriter/WebRoot"
path="/LoginBean" reloadable="true"/>
Still no use.
Please help!
Edited by: tipseeker on Dec 1, 2008 3:51 PM

tipseeker wrote:
<!DOCTYPE faces-config PUBLIC
"-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN"
"http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
I highly recommend your to stop with this and restart with JSF 1.2 instead. JSF 1.0 is legacy and may have still some nasty bugs. You may find this JSF 1.2 / Eclipse 3.4 / Tomcat 6.0 startup tutorial useful as well: [http://balusc.blogspot.com/2008/01/jsf-tutorial-with-eclipse-and-tomcat.html]
<context-param>
<param-name>javax.faces.DEFAULT_SUFFIX</param-name>
<param-value>.xhtml</param-value>
</context-param>There's the root cause of the problem, I think. Why did you add this? Are you using JSP or Facelets? This configuration is typical for Facelets, but in your remaining code I only see JSP's being mentioned.

New document, query drill, scope of analysis, buttons disabled

Hi,
i have many reports, as part of develepment, we are planning to use drill down in some reports, but,when i edit the report in infoview, it is possible to create new document but not in rich client, and it is not posible no edit query in rich client, the button is greyed out, also the drill button, and even the create new document is grayed out.
I read another post that says, is not posible to use scope of analysis if the universe is from BI,so i tought it could be the reason that scope of analysis was greyed out, but did another test with universe e-fashion and it´s exactly the same problem, the buttons -create new query edit query, drill, scope of analysis, are disabled.
I have all the rights in infoview and cmc i have tha administrator account, Could be the problem ..........that we have a temporary license?
Thanks for your help hope to solve it quickly

Hi,
Copy the report from Public folders to your favourites and tryfor drill down or creating a new document. May be your admin team can restrict in QA or PROD generally.
Cheers,
Suresh babu Aluri.

Infoobject not available in "D" version

Hi Friendz..
I am trying to activate the Business contents using report "RSO_BC_INSTALL_ALL". While analysing the log in SLG1, I find that the system shows that some of the infoobjects are not available in "D" version.
Example of error log:
Object '/APC/CHANCD' (IOBJ) of type 'InfoObject' is not available in version 'D'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '/APC/CHANCD' (in transport request IOBJ) of type 'InfoObject' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version D. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
Please suggest the reason for it.
Thanks & Regards,
Surjit P

hi
have you checked the infoonject in object types in BI content tab.click object types and in that choose infoobject and search the infoobject. if its there then drag and drop and install it.
Regards
Dina

Createdb10.sql with error "ORACLE not available"

guys..
I have installed PeopleTools 8.49 and PeopleSoft HRMS 9. I installed Oracle 11gR1 on OEL 5.3
I create /oradata/DEMO111/create by my self.
I modified file createdb10.sql
set termout on
set echo on
spool createdb.log
startup nomount pfile=$ORACLE_HOME/dbs/initDEMO111.ora
CREATE DATABASE "DEMO111"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
DATAFILE '/oradata/DEMO111/datafiles/system01.dbf' SIZE 300M REUSE AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL
SYSAUX DATAFILE '/oradata/DEMO111/datafiles/sysaux01.dbf' SIZE 120M REUSE AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
SMALLFILE DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE '/oradata/DEMO111/datafiles/temp01.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT
640K MAXSIZE UNLIMITED
SMALLFILE UNDO TABLESPACE "PSUNDOTS" DATAFILE '/oradata/DEMO111/datafiles/psundots01.dbf' SIZE 200M REUSE AUTOEXTEND ON NEXT
5120K MAXSIZE UNLIMITED
CHARACTER SET AL32UTF8
NATIONAL CHARACTER SET UTF8
LOGFILE GROUP 1 ('/oradata/DEMO111/redologs/redo01.log') SIZE 51200K,
GROUP 2 ('/oradata/DEMO111/redologs/redo02.log') SIZE 51200K,
GROUP 3 ('/oradata/DEMO111/redologs/redo03.log') SIZE 51200K;
spool off
I get ORA-01034: ORACLE not available and also ORA-00371: not enough shared pool memory, should be at least 102341017 ( below startup nomount pfile=$ORACLE_HOME/dbs/initDEMO111.ora
I set my ORACLE_SID at /home/ora111 and I edited bash_profile. Put and export ORACLE_SID=DEMO111
any Idea..?? please help.
best regard.

well thats true. I changed shared_pool_size to 112500000. Database created. Then I add :
undo_management=auto
undo_tablespace=PSUNDOTS
remote_login_passwordfile=NONE.
Q : How do we make password file like the guide said?
I ran utlspace.sql then PSTEMP and PSDEFAULT tablespace created.
I ran dbowner.sql then PSDBOWNER table, Index, sysnonym created. then revoke connect, resource, dba from PS.
I ran hcddl.sql then a lot of tablespaces created. But there are some tablespaces that were error.
The notification are same. ERROR at line 1:
ORA-19502: write error on file "/oradata/DEMO111/psindex.dbf", block number
153856 (block size=8192)
ORA-27072: File I/O error
Linux Error: 2: No such file or directory.
Additional information: 4
Additional information: 153856
Additional information: 839680
Q: Do you get same error? Is it about block number or block size?
I continued to run psroles.sql PSUSER role and PSADMIN role created. Also Grant succeeded.
I continued to run psadmin.sql twice because I miss the name. Second time I runned psadmin.sql, I put SYSADM as Peoplesoft Owner ID and PS as Peoplesoft Owner ID Password.
Q: What is Peoplesoft Owner ID Password? We create the Peoplesoft Owner ID Password in this running or it already created before.?
I continued to run connect.sql.
I cannot alter system set NLS_LENGTH_SEMANTICS=CHAR scope=both; But I can create spfile (I copy initDEMO111.ora to /apps/oracle/admin/DEMO111/pfile )
I install peopletools 8.49 first and peoplesoft HRMS 9 at the same directory on Window XP. ( c:\apps\psoft\hrms9)
but when I compare with your steps, it's different from this picture. I go to All Programs, I just see Peopletools 8.49 there.
http://2.bp.blogspot.com/_GAPqu9CUk1k/R4aT2fOgWiI/AAAAAAAAAN4/WYYq8JdsAfw/s1600-h/1ScreenShot001_LoadAppl.jpg
I go to Configuration Manager on my client computer, connect password is disable. What can I do for this
When I installed peopletools 8.49 ( both on Window XP and OEL 5.3), the installer did not ask for cd 2 to cd 7. I just runned cd 1, and it said "installShield wizard successfully installed...." It should skip the cd 5 on Windows XP, the installer did not ask the cd 2 and the rest. What's wrong?
(I just re-formated my computer with OEL 5.3 and installed again from tuxedo)
well, I just downloaded Oracle Client 11gR1 and installed with Administrator Type.
Q: How we connect to database server with Oracle Client like you said before that I will need Oracle Client runtime installation..?
hope you can help. :)
best Regard.

SAP Standard Transactions are not Available

Hi all,
I have one issue that we want to start our project system but some SAP Standard Transactions are not available when i check that Transaction its showing "DOES NOT EXIST". I have then Checked Program name of that same SAP Transaction code in SE38.. But there also it gives "program does not exist" .
Path is :SAP Menu ->Information Systems ->Project system ->Financials -> Costs ->Plan-based ->By Cost Element ->---Few Tcodes in this
I want to find out all Inactive Reports in Project System from Project Information system and then i want to make usefull that reports for client.
but i dont know the reason why this is not available..?and How can be made these all available.
Thanks.

analyse table t800
A.

ORACLE XE Not Available

Hi All:
I've been using Oracle Express Edition for a while, but today it has stopped working. The service is starting correctly but not the database, as you can see below.
net start OracleServiceXE
The OracleServiceXE service is starting.
The OracleServiceXE service was started successfully.
sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Jan 11 16:33:50 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn system/password
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Any idea?
Thanks.

Maybe it can help you.
Wed Jan 10 18:44:51 2007
ALTER SYSTEM SET sga_target='1000M' SCOPE=SPFILE;
Wed Jan 10 18:54:28 2007
Memory Notification: Library Cache Object loaded into SGA
Heap size 3823K exceeds notification threshold (2048K)
Details in trace file e:\oraclexe\app\oracle\admin\xe\bdump\xe_s000_1688.trc
KGL object name :with sqlplan as (
select c006 object_owner, c007 object_type,c008 object_name
from htmldb_collections
where COLLECTION_NAME='HTMLDB_QUERY_PLAN'
and c007 in ('TABLE','INDEX','MATERIALIZED VIEW','INDEX (UNIQUE)')),
ws_schemas as(
select schema
from wwv_flow_company_schemas
where security_group_id = :flow_security_group_id),
t as(
select s.object_owner table_owner,s.object_name table_name,
d.OBJECT_ID
from sqlplan s,sys.dba_objects d

Merge Dimension & Scope of Analysis buttons inactive

Hi experts,
We are currently on Business Objects XI 3.0. I am trying to merge common dimensions from 2 Universes, or to perform Drill-down on hierarchies. However, I don't know why the buttons <Merge Dimensions> and <Show/Hide Scope of Analysis Pane> are inactive, ie. grey in colour.
Is there something I need to set before I can use these 2 functions?
I've already ticked 'Auto-merge dimensions' (under Document Properties), but this flag is always unticked when I create a new document.
I've also set 'Start drill on existing report' (under Tools > Options).
Would appreciate any suggestion on getting these 2 functions working. Thanks in advance.
Linda
Edited by: Linda on Mar 9, 2009 11:01 AM

Hi Linda,
Have you tried Unchecking the option u201CUse Query Drillu201D (Document Properties) i.e. 3rd option under Document Options in WEBI?
I am not comfortable with SAP BW OLAP Universes because I never worked on it.
If you canu2019t combine the queries or u201CAdd a combined Queryu201D button is disabled then follow the steps:
1. Import the universe on which you are building the report.
2. Goto Universe Parameters-> SQL tab-> Check the option u201Callow the use of Union, Intersect and minus operatorsu201D
3. Save and Export the Universe
4. You can combine the Queries now.
I Hope this Helpsu2026..
Thanksu2026
Pratik

BI 4.0 Interactive Ana;lysis BICS Connection to BEx Query Scope of Analysis

Is there any setting on BEx query that needs to be set for Scope of Analysis to be enabled for hierarchy drilling in Query panel?

You are not able to use scope of analysis in an BI Universe.....if you want to use hierarchie you can define them in the universe manually...and it willl work for drilling options...
Regards

SCOPE OF ANALYSIS button Inactive

Hi,
I am trying to use SCOPE OF ANALYSIS in my webi report but the Scope of analysis button is graded out.
I have tried unchecking the "USE QUERY DRILL" under document properties as it was said in one of the threads, But no luck.
Could any one please hellp me through this, How to make SCOPE OF ANALYSIS BUTTON active??
Thank You!

If what Oscar suggests does not work, it may be a permissions issue.
You need to be granted permission to drill at the WebIntelligence Application settings via the CMC

Scope of analysis is not available

Similar Messages

Maybe you are looking for