Scope of Check Variation in Missing Part list Production Order

Hi,
I have a problem that While creation or conversion from planned order to production order if i get missing part list i found that Scope of check is as Z6 and ZP (Checking rule).But when when i Release the same production order also am getting missing part list here when i check scope of check as Z6 and PP(Checking rule).
Why this difference is coming,can any body tell the possible causes.
Cheers,
Kumar.S

>
KUMAR.S. wrote:
> Hi,
>
> I have a problem that While creation or conversion from planned order to production order if i get missing part list i found that Scope of check is as Z6 and ZP (Checking rule).But when when i Release the same production order also am getting missing part list here when i check scope of check as Z6 and PP(Checking rule).
>
> Why this difference is coming,can any body tell the possible causes.
>
> Cheers,
> Kumar.S
Kumar,
Its simple for creation and release of Production order different checking rule is used(This must be intentional). You check this in OPJK transaction, check for your order type / Plant combination for Business function 1(Create) the checking rule assigned would be ZP, whereas for the same order type / Plant combination for Business function 2(Release) the checking rule would be PP.
If you want the same, you can change it here. But I assume there must have been a purpose for this custom checking rule creation. You can find the scope of check difference between these 2 combinations in transaction OPJJ.
Regards,
Prasobh

Similar Messages

Standard Report for missing parts at production order operation level?

Hi PP Gurus,
            We have standard report for missing parts at production orders level.
For our client, they need a report for missing parts analysis at production order operation level. Do we have any such standard report in the SAP?
Please help.
Thanks,
Reddy.

Hi Arvind,
      Thanks for for your response.
1. List: Components, Layout: Standard layout          set the Missing part
       It shows the component requirement/withdrawn quantity for each operation of production order. It is not showing the commit quantity.
2. List: Components, Layout: Pick list          set the Missing part
       It shows the component requirement/withdrawn quantity for each production order.
3. List: Components, Layout: Missing Parts List-Material View          set the Missing part
       It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
4. List: Components, Layout: Missing Parts List-Order View          set the Missing part
       It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
      We are unable to get the solution from all these 1 to 4 reports from COOIS.
Do we have any option to change the existing layout (ex: 3 ) to get the commit quantity for operation with missing parts indicator?
If avilable, what is the procedure to be followed?
Thanks,
Reddy.

Autmatic upadate of status of missing parts in production order

Dear Gurus,
In production order to check missing parts status we have to click on push button for check for material availability. Is there any way available to update the latest material position in production order automatically?
Regards,
SAP CONS

Dear ,
This can be set at Order Control in OPJK .
You can goto OPJK-Select order type , plant and indicator 1(Availablity Check ) -Here Do not mark No Check check box and Mark material availablity check while saving .Keep the Collective Conversion indicator as 1-User decides based on if material is missing parts .
Regards
JH

Missing Parts in production Order no committed date and qty

Hello Guru,
May I ask your help to check our issue when we create a Production order, we got an error Order has missing parts. When check the Availability Check view, most of the components do not have committed date and qty even there are available stocks on them.
Can you help check what went wrong and its possible solution already check OPJK and OPJJ seems we have correct set up for this.?
I tried to check in CO09 on one component. from there there is also 0 committed qty and date. While the other component has OrdRes with 0 committed qty and date and there are some with values. Please help thanks.

Hi Ramagari,
OPJK
Plant AAAA
Ord Type: YYY1
Avalability Check: 2 (Check availability during order release)
Material Availability Part
Check mat. availability when saving order (tick)
Checking Rule : YP (PP checking rule - Production Order rel.)
Component Check Type : ATP Check
Release Material: 1 (User decides on release if parts are missing)
PRT Part
Checking Rule : 02 (Status check and inventory audit)
PRT Release : 1 (User decides to release when there's no PRT)
Capacity Part
No check (tick)
OPJJ
Availability Check: 02 (Individ. Reqs)
Checking Rule: 01 (Checking rule 01)
Stocks parts:
Include safety stocks (tick)
Missing parts processing part:
Checking period: GR : 0
In/outward movements part:
Incl. Pur Ord : X
inlc. pur Req (tick)
incl. dep req (tick)
Incl. reserv (tick)
incl. sales req (tick)
incl deliver (tick)
incl. ship notif (tick)
incl rel ord reqs : X
incl pld ord : X
incl prd ord : X

How to calculate missing parts for production orders?

Dear All,
I have this scenario i'm using collective orders\direct production method in my industry which means that sub assemblies don't enter any warehouses but transferdd directly to its superior order as a component , my problem is i want to know the missing raw material for the finished product , knowing that the FP has a 6 level BOM i want during ATP for production order the sustem checks only for the lowest level of material and takes only the CURRENT STOCK IN WAREHOUSES , what checking group should be used for the FP, Subassemblies and raw materials.
plz help
Ahmed Sobhi

HI,
If no Av. Check is to be done at all, then specify checking group as KP. But be informed, this will be impactive across all business processes meaning if you plan to sell the SFG & you place a SO for that item, an Av. Check will confirm it immediately as it has av. checking group as KP.
Now for the checking group maintained for raw mtl, go to OPJJ & check the details of the checking rule to know which receipts/ issues are considered & you may modify the same as per your need.
I would suggest do a test in your sandbox & if it meets your need, then adopt the same.
Regards,
Vivek

Missing Part List !!

HI
Is there any std report to see the missing part list.
I mean material issued to prod order and we wana see the shortage.
Thank You

in co11n or co15--from menu --u can check for any missing parts against prod. order..

Why the missing parts list changed after Pro.order released

I open a pro.order before released ,then I do the availability check get a missing parts list, this list including less parts than the missing parts after pro.order released ,why does it caused?which configuration caused?
Thanks,
Helai

Hi Lai,
You can do Material Availability check at the two stage of Production / Process Orders.
- First is to control (Check Missing Part) at the time of Order Creation.
T.code is OPJK - Select order type and Business Transaction -1 at the time of Order Creation
- Second is to control(Check Missing Part) at the of Order Relase.
T.code is OPJK - Select order type and Business Transaction - 2 at the time of Order release.
So it may possible that you have assign different checking group or checks to the above both stages , that's why you got different result regarding missing parts during above both stages.
Regards,
Dhaval

Missing parts for Process orders

Hi Experts,
We are trying to find out the Transaction to faciltate the Missing parts list for the process order even after the order has been completed having the Status TECO, CLSD. This is to understand whether proper enough materials are consumed for the order or not. Based on that Production incharge can ensure the component consumption is made as per the Process order requirement.
We are trying with CO24, this is showing the missing parts list if order does not contain TECO and CLSD status.
Also we are checking with COOISPI, COID, but could find the correct feature out of them.
Do we need to develop any customized report with the help ABAPers.If yes please guide us the method.
Please help us in acheiving the list of components which are not consumed as per the Process order requirement.
Also guide us to identify the list of materials which are excess consumed for the Process order.
Thanks in advance..

Hi Jiaul,
Thank you very much for your reply.
So we need to develop the program to flag the missing parts and its qty even after the Order has the status TECO or CLSD.
Can you please provide logic to develop the Program.
I am thinking to take the inputs from process order required qty Vs withdrwan qty. if the Qty difference is positve, which should come under missing parts. if the difference is still negative means excess qty consumed.
Waiting for suggestions
Thanks in advance

Missing parts list variations

Hi Guru's,
When we checked the missing part list in the "COOISPI "report (Process Order infromation system) for the planned order and compared this with the missing parts in the MD12 for the particular planned Order, there was a differnece in number of entires (components) betwwne both these lists. why is the missing part list for MD12 and COOISPI is showing the difference?
If anyone is familiar with this report please let me know what can be the reason for the difference. also can any explain the logic how this report does the availability check for the missing parts.
Thanks,
Nagesh.

Dear Nagesh,
1) For missing parts at plan order level check in MDVP ( Not in COOISPI )
2) Compare MDVP with MD12
3) AV check will carried out based on settings defined in OPJJ ( Combination of cheing group & checking rule )
Regards
Madhu Kumar

Missing Parts List While creating Prd. Order

Hi Friends,
My client is creating production Orders Manually thru CO01and While Creating & Saving The Production Order System Is Not Supporting In Giving Missing Parts list In spite Of Deficit of Un Restricted stock inStorage Location For BOM components used in that Order.
To my surprise when the defisit is for all the BOM components only one component is showing as missing part in missing parts list.
But While confirming the order The system is showing missing parts for all the components which are defisit for order confirmation.
I Tried To Get This From the Following Method
Checked For Define checking control In OPJK.
Selected plant, Order type & selected the business function 1 for create or 2 for release. And Maintained These Settings
a) Removed tick mark in No Availability check.
b) Type of component check Given as - ATP check.
c) Material release - 1. User decides on release if parts are missing.
d) PP Checking rule (Which Is same As with plant parameter OPPQ)
e) In Define scope of check (OPJJ) made a tick mark in check w/o RLT.
Then Assigned the availability checking group at Mrp View of Header material.
In spite Of All These Settings Still At The Time Of Order Release/Save A Warning Massage Or A Informative Massage Is Not Appearing
*Please Suggestu2026u2026u2026u2026*
hari

Hi,
Please check same checking rule use in Material master and with order type and plant?
Check the cheking group in material master MRP3 view for all material.
Go to Transection OPJJ - Maintain scope of check,
Select your Checking rule which you have assing to your order type and tick INLCUDE RESERVATION.
(1). CO24- Missing Parts Information System
Under this transaction you choose Selection from Reservations and then select Plant & Material then you can get Missing Parts List for your respective material without production / planned order also.
(2). COOIS : Production Order Information System
Under this transaction you need to Select in List option as Components and then go on Selection Tab.
For collective availability check use
COHV - Excute the roport w ith collective avaliabilty check.
COMAC.
Hope this help.
Regards,
R.Brahmankar

Missing Part list for Plant to Plant Purchase order

Hi,
      I need the following requirement in CO24,
      In CO24 its shows the missing parts for Sales order, similarly we want the missing parts list for Plant to Plant Purchase order in the same report. Also the report,
1.It should not consider the Planned order for a sales order.
2.It should not consider the planned order which can be convert into purchase requisition.
3.The procurement type should be "E" or "X".
Kindly guide me is there any standard layout changes in available or any development we have to do.
Thanks
Muthamil Murugan.G

Hi Purushothaman,
If you have the following settings in OPJK:
Plant                 XXXX
Order Type       XXXX
Availability Check    2
[X]Status Check
[X]Check material availability when saving order (may not need)
Checking Rule        PP PP checking rule
Component Check Type    ATP check
Release material     2 Release permitted despite missing parts
Then in COHV you try to mass release the order with the following parameter:
List: Order Header
Selection: Your selection criteria
Mass processing:
Function: Release
Max. No.of Processes 99
Save Log: Always
Release control order: Collective Order Release
Then after the order is released, you can find the missing part list of that order in CO03 menu path:
Goto->Missing Parts->Missing parts list
Hope it helps.
Regards,
Rachel

Missing part list is incomplete while creating Production Order and 2 components are not shown in the list.

Hi Team,
We are facing issue for availability check. During creation of Production order, the missing part list is not complete and it should show componenet A in the Missing part list. Below is the details:
Production Order quantity: 100 kg
Componenet A required quantity: 100 kg
MMBE Unrestricted qty: 1000 kg
MMBE Reserved Quantity: 2000 kg
So as per above figures component A should come as missing part during availability check. But it is not coming as missing part. Please check and give your inputs.

Hello
The results of availability check should NEVER be compared with MMBE. As already mentioned, transaction CO09 is more appropriate.
Also, this issue has been already discussed on hundreds of threads in the past. See some examples below:
Problem with missing parts list during production order creation
issue in committing material for production order
Material Availibility check in Production orders
availability check
order is not released
As it is stated on the The SCN Rules of Engagement you should do some research before opening a thread. Therefore, please use the search tool or even google to search for similar problems before opening a thread.
BR
Caetano

Production Order missing Part list error date 1,857 is not convertable

*Dear Experts*
When i m trying to check missing part list at production Order then system is showing the error
The date 1,857 is not convertible (please correct) in Production order Missing part list.
Rgds
Pankaj Agarwal

Dear ,
System is throwing you this message beacue your FC calander is vaild till 2010 and asking you to put the date btn FC valid from 2004 and FC valid to 2010.
Goto -OP03-Select the Factory Calnder Tab in change mode (pencil mode ) -Select the applicable calender chek box-Double click this -Extende the validit date till 2020 or beyond so that u will not face not only in this particular issue but in many other txn later on .
Agian -come back to OP03 main screen -Slect the Holiday calaner -Extende the same way and reassing in Factory calander
after this , do not forget to re-ssign this FC in respective plant in OP03-Plant assingment .
Try and revert back
Regards
JH
Edited by: Jiaul Haque on May 27, 2010 3:14 PM

Missing part list in plant maintenance ( CO 24)

Hi SAP experts,
Is it possible to use the transaction CO24 ( missing part list) for plant maintenance orders? If yes, what are prerequesites & configurations needed for it?
Regards

Hi,
I think CO24 can be used for Maintenance Orders too.... as there is no order category field mentioned in the selection screen.
Try for one the PM order and check ... currently I don't have any PM order other wise I would have checked and let you know....
Hope thsi will help you.
regards
radhak mk

Co24 missing parts list does not show material with shortage

Dear All,
I have a following problem: a production order with status MSPR which has 2 components in the missing parts list from availability check (inside that PO).
In Co24 tcode system does not show any missing parts for the same production order.
For these missing parts i have shipping notifications with an exeption message 10: "bring process forward".
My question is why Co24 does not show missing parts while they are shown in the production order if click on ATP check button.
Is there any interconnection with expection messages to bring process forward?
Thanks for your help!
Regards, Andrey

It seems that at the stage when atp check was run last time there were no reciepts for missing parts. When i was doing ATP check in production order i didn't save results thus respective table was still containing old results.
After i saved results of ATP check in production order missing parts were dispayed in Co24 as expected.

Scope of Check Variation in Missing Part list Production Order

Similar Messages

Maybe you are looking for