Scope of planning MD 01

Hi gurus,
Hi i have define scope of planning ,tick the parallel proessing box in MD01.
Now during MRP run i m getting error mesage as"please check the destinationfor parallel processing "
Whats this.
please suggest

Hi,
In SPRO> MRP> PLANNING> Define MRP destination for parallel processing.
In this add your server name & in next field put no.1
Regards,
Dharma

Similar Messages

Scope of Planning for Total Planning

Hi SAP Gurus,
My Client Scenario is as follows
They import Spare Part materials from abroad to a Main Warehouse (defined as Plant in SAP) and then do stock transfer to around 60+ warehouse in different states (each defined as Plant in SAP).
At any time Stock exists in any of 60+ Plant and Main ware house Plant. However Purchase requirement and Purchase Order is created and placed from Only Main Warehouse Plant.
Now I am implementing Consumption based Planning with MRP. I am Planning to define a Scope of Planning for Total Planning.
Clarification I request :
1. Whether I need to define Only all 60+ Plants in Scope of Planning or can I include Main warehouse Plant also ?
2. In which case if there is requirement in one individual Plant and there exists stock in another one Plant - whether system will automatically create stock transfer Planned order. What Special procurement type I need to define for this (If it is 40 , whether I need to define any Issuing Plant, since I have 60 + Plants)
3. If I have to run Forecast and Planning run daily for 60+ Plants and weekly for Main warehouse Plant, Whether I need to create a Separate Scope of Planning for 60+ Plants and a Separate Variant for Main ware house Plant with different Schedules - Am I correct
Thanks and Regards,
R.Velmurugan.

Hi Kumar,
Thanks for your immediate response.
If we define Special procurement type 40 for 60+ warehouse Plants materials with Supplying plant as Main Warehouse Plant, then if there exists stock in one of 60+ Plants and there is requirement in one of another 60+ plants how system will consider and create stock transfer between them.
Whether stock transfer between 60+ as well as Main plant is Possible ? If possible how to define Special Procurement type ?
Secondly what ever issued from 60+ Plants is the real Consumption of Material (as Material issued from Main ware house plant to 60+ Plants is only stock transfers and not real consumption).
In which case how to go about for forecast and MRP run for 60+ Plants and Main plant ?
Thanks,
R.Velmurugan

No Planning happening with scope of Planning for total Planning

Hi SAP Gurus,
The Scenario is for Consumption based planning and MRP run.
I have created a New Entry under Scope of Planning for total Planning run and entered the required two plants under sequence of Plants.
I have also entered manually consumption values for trial materials in those two Plants. I maintained MRP and Forecast View.
I then ran MD01 using the Scope of Planning created. But when I check the MD04 results for trial materials, no Planning has happened.
I shows a message "Pl carry out Forecast for material xxx in Plant xxx "
Then using T.Code- OMDO, I created a variant for each Plant and also Scheduled. But after then also with MD01, No planning is happening.
When I check under T.Code - OMDU, the respective Plants were activated
Pl guide me the steps for Creating of Scope of Planning and then how to set up planning file and what could be the reason materials are not getting Planned.
thanks and regards,
R.Velmurugan.

Dear Mariano,
MRP type VV (forecast based Planning) is used for these materials.
I defined Scope of Planning for Total planning and included Plants in sequence.
Then I created new Variants for Planning file entries for these Plants (T.Code - OMDO).
Then I created new Variants for Planning file entry consistency for these Plants (T.Code - MDRE)
After then I executed Mass Forecast (T.Code - MP38) and then carried out total planning run using T.Code - MD01.
Now the materials are getting planned.
I missed Forecast run earlier.
I found the reason for the problem, hence closing the thread.
Thanks to Mariano and Daniele for your inputs.
Regards,
R.Velmurugan

Scope Of Planning

Hi All
We are using central planning and have defined the scope of planning in configuraton . We have also defined parallel processing .
But we can only see scope of planning field in MD01. We cannot see it in MD02. I beleive MD01 is for planning for single level only . We need to run the planning for single item , multilevel .
Can any one give me step by step procedure for executing the scope of planning run with the settinngs. Thanks
Kind Regards
Ayaz

Dear ,
MRP can be run Singel Item , Singel Level in MD03 that means materila can be planned individual level in this txn .Where as MD01-MRP Run means total planning irrespective of Plant , MRP Area , MRP Controller , Storae Loaction or Group of any combination at lowest level of the materail ( Lowest BOM level or Lowest Code ) .That's why in MDO1 , there is an option called Scope Of Planning through which you can plan matyerials in multiple location ( plant , storage loaction , MRP area etc ) based on the BOM structure ( singel level or Multilevel ) .
But in MD02-Singel Item , Multilevel means individual item having BOM , can be planned along with dependenet at its lowest level .So here you can not run MRP at group of plant or other combination as like MD01.But you have option to run at product group level where materials are includede under a product group.
So there is no such set up to run Scope Of planning in MD02 .
Hope it is clear
Regards
JH

In scope of planning ( md01), How to maintain MRP areas in scope of plg?

Hello PP members,
In scope of planning ( md01), How to maintain plant or MRP areas in scope of planning ?
What is the transaction code for maintaining plants or MRP areas in the scope of planning
I tried transaction code SAMP, Also went to SE93( Maintain transaction) for any related transaction codes for maintaining plants in scope of planning, it wasn't much help
Thanks for your time,
Thanks Again,
Suren R

Hi,
we can use Total planning(MD01) for a single plant or use scope of planning to control whether total planning is to be carried out for single plant/sevaral plant/ for one MRP Area/sevaral MRP areas/ combination of plant and MRP Areas.
Steps :
1.Group together the plants which are to be planned in spro in --->Define scope of planning.(OM0E)
2. Define the scope of planning as 999 for ex and give description.
2. Now select that and Specify the sequence in which Plants and MRP Areas are to be planned,
3.Goto new entries and enter the plant as 1000/MRP Area as 1000 with counter 1 and plant as 1100 with counter 2 and save.
4.Execute the total planning either as online job or as background job.
5.The planning run has to be always started with paralle processing.
In SPRO in define parallel processing in MRP enter the destination for parallel processing for ex your server name and enter the no .of sessions as 1 and save.
6.Tcode MD01 enter the scope of planning group and selet the parallel processing and enter.
7. All the materials to be planned in the plant / mrp area will be planned now.
Regards,
nandha

Testing MRP scope of planning and MRP lists

Hi,
I am configuring the scope of planning and want to know how can I test if the planning is happening in the sequence as specified in the scope of planning. I would have around 20 plants in the scope. I thought of going after the time stamp on the receipts created by the system. Is there any table like MDKP which can show me the sequence of planning ?
Also what is the use oif the tcode MD08.... delete MRP lists ? what is the use of deleting these lists besides keeping the system clean
Thanks

Hi
Reorganization of the MRP Lists - MD08
A report is available for reorganizing the MRP lists which you can find in the menu for MRP under the menu option, Environment. If you enter the selection criteria, plant, material, and MRP date, the system deletes all the MRP lists from the database that are no longer required.This report can also be started in a test session and you can instruct the system to print out a list of all the deleted MRP lists.
Further
Deleting MRP Lists - Manually in MD05
If the MRP list is no longer required, you can delete it manually. In order to do this, choose MRP list ® Delete document. The MRP list will be deleted.If you do not delete the MRP list manually, it is stored in the system until a new MRP list is created by a further planning run.
regrads
muthuraman.d

How can we assign a different scope of planning in MTO scenario?

Hi,
We are using MTO scenario. In this case, during sales order creation checking control AE is getting triggered. We want to use a different scenario during rescheduling transaction. But as per my analysis, V_V2 is also calling the same AE checking control eventhough we assigned a different checking control for Back order processing.
In this case, can we assign a different checking control (scope of check) for back order processing?
Regards.

Let me explain my requirement here....
This is a kind of trading or sub-contracting. Initially we will give the forecast to vendor...but Vendor will start the finished product production only after getting the confirmed order from us. Hence we thought to use strategy 50. So we will create a PO to Vendor only after getting a confirmed sales order from customer.
But in strategy 50 ATP confirmation is based on PIR. Hence we created a new requirement class (copy of 45 with ATP active). So in this new strategy ATP is against actual receipts instead of PIRs.
But sometimes Vendor may not be able to supply as per lead-time...and he may postpone the delivery date. In this case we are getting exception message 10 for the PO...even though PO is specific to a sales order. Still rescheduling job (V_V2) is not populating the new confirmation date as it is referring to the TRLT.
Hence we want to use ATP based on TRLT during sales order creation. And during rescheduling we want to use a different scope of check ('without TRLT' and with 'No storage location check'). Hence we created a new checking rule for rescheduling and this we assigned for that specific plant.
As per my observation, rescheduling job is not picking the scope of check that is assigned for rescheduling....it is calling the same checking rule AE during rescheduling also.
So my question here is... can we call a different scope of check during rescheduling run while using make to order strategy?
Regards.

Total Planning run (Scope of Planning)

Hello All
I am having a scenario wherein under a plant there are three divisions A, B & C. Divisions A & B falls under PP but Division C falls under PS. Now what I want is that how to plan the first two divisions A & B with total planning, cos i dont want to include Division C as for this division MRP would be run at Project level. Do I have to create MRP areas for these two Divisions A & B? Can you guide me out of this issue. Your inputs and guidance shall be appreciated.
Regards,
J K Tharwani

Thanks for your input YMReddy & Dharma,
I shall explain this thing again that there is a plant 1200 in which I am having three division A, B & C. C-Division is under PS, & Divisions A & B are under PP. What I want that I have to plan the materials under PP seperately under the total planning, becuase for Division-C MRP is run for Project.
I intended that I would create the different MRP Area for Division C, becuase by doing so at plant level this MRP area would be not considered, and when am running MRP for the plant 1200, it would only consider remaining Divisions A & B.
Initially, the plant MRP area includes the plant with all its storage locations and stock with subcontractors. When you have defined MRP areas for storage locations and for subcontractors and you have assigned the materials, the plant MRP area is reduced by exactly this number of subcontractors and storage locations, as they are now to be planned separately.
Please let me know if am going in the right direction. Waiting for your valuable inputs.
YMReddy please throw some more light on the inputs you have provided, and I would appreciate if you look into the input which am thinking of and provide your inputs as well, as in why it wont be useful this way. Your inputs shall be highly appreciated Thanks again YMReddy.
Regards,
J K Tharwani

Toatal scope of planning

Dear All,
I am getting below error message while MRP Run in MD01.
Please check the destinations for parallel MRP.
Could plz suggest me

Hi sailendra mulagada..,
Please check IMG-> Material management -> Consumption based planning -> Define Parallel processing in MRP.
There give the destination for llel processing and number of sessions.
if not solved come back.
regards.

Cross Plant Planning- MRP activation indicator turned after the creation of Material code

Dear Experts,
Working on Cross plant planning, where 1001 Production plant will stock transfer material to 8 different plants.
Right now, only 10001 plant had MRP and planning file entry ticked in customizing OMDU.
The other 8 plants have Materials codes created and MRP views extended but no MRP activation is ticked.
Now, to have Cross plant planning MRP set, I have done necessary configurations, Scope of Planning, Special Procurement 40, and parallel processing is configured. All master datas are set properly. Tested few scenarios in IDES, working fine.
If my understanding is clear, than I thin I need to run MDAB, activation of planning file and MDRE, Planning file Consistency Check, because MRP will run in background?
Is this correct or something more needs to be done ?? Please suggest
Please also tell what is the use of MDRE t code.
Best regards
Shailesh

Hello Shailesh
MDAB (RMMDVM20) is at plant level, you need to create different variants as per your plants
Create a variant for the new plants and then schedule a job for these variants.
Check customizing transaction OMDU -> set up planning file
entry and consistency check of planning file entries.
Best Regards,
R.Brahmankar

Sope of planning /qouta Arrangement

Hi PP expert.
i want to under stand scope of planning. there are two finish material type,one MTO and another is MTS.and have 4 production plant.
now for the MTS i want run one MRP for 4 plant. can i do from Scope of planning or Quota Arrangement.
kindly Guide me step be step of both scope of planning and quota Arrangement.what is difference in both.and which process is easy. and how i will send Demand managment to all 4 plant for MRP run.in both case.
Now for MTO.same there are 4 plant and want run only one MRP.can i do from scope of planning or Quota Arrangement.
kindly guide me for both MTO and MTS.only one MRP run for 4 plant
Regards
Aqueel

Aqueel,
You have asked about many topics. It is not clear what exact business objective you are trying to accomplish.
Quota arrangements has to do with the determination of sources of supply. It is not the same as running MRP in multiple plants.
MRP in ECC normally runs plant-by-plant. You can create a scope of planning, in which you specify the order of plants that MRP runs against. In this case, you execute MRP once, and in the background, MRP looks at the list of plants you have created, and then runs against the first plant, the second plant, the third plant, and so on. During the MRP job with Scope of Planning, the MRP processing programs do not run against multiple plants simultaneously, they complete one plant, and then move onto the next, and so on, until the end of the scope of planning list. You can configure scope of planning in OM0E.
Now you ask about two types of planning methods for materials, one is MTO and one is MTS. I guess you want to run MRP for the MTS only, against the 4 plants. You could define the MTS materials as MPS relevant, (change MRP type to M*) and then run an MPS job instead of an MRP job. In this case, MPS (MD40 et al), which is very similar to MRP, runs only against the MPS parts. If this workaround is not satisfactory, then you can use the standard MRP selection userexit (M61X0001) to define a specific suite of parts to run MRP against (such as "all MTS parts"). If you combine either of these solutions (MPS or userexit) with scope of planning, you can then run only the MTS parts against the 4 plants in your scope of planning, all in one job. You didn't speak of when/how you want to run the MTO parts, but you could do the same thing for these parts as well.
If, however, you wish to run both MTS and MTO parts in a single MRP run, against 4 plants, then just use scope of planning.
Demand management is not directly related to MRP. You can create Planned independent requirements for any combination of parts that you desire. These requirements, once activated, will cause MRP to run net requirements calculations, and produce procurement proposals (PurchReqs or PlndOrds or PurchScheds).
Rgds,
DB49

Inter-plant planning in REM

Hi i need some suggestions for inter plant planning in REM before mapping in SAP.
Our Scenario is Repetitive manufacturing and we have 2 plants which have 3 assemblies in each plant in case of discrete/process scenario with using special procurement key we can do inter plant planning but in case of REM SAP HELP suggest its not possible but don't understand why it is so?
please refer this link : http://help.sap.com/saphelp_46c/helpdata/en/70/442986c48d11d1b59d0000e82d81c3/frameset.htm.
So i want some suggestions from any one you who might have already experienced this scenario to map in SAP.
As i understand this can be achieved by MRP at 2 plants or with scope of planning apart from these is there any other way which can be simplified the task.
Cheers
KK
Edited by: kiran kumar on Feb 7, 2011 4:54 PM

On which version are you working?
ECC6
Have you tried the Inter-plant planning in REM If yes then what the error are you getting?
No i haven't tried this scenario will try and update mean while i want some inputs from any one who might have already experienced this scenario.
It s possible a stock transfer of the production plant may also be executed to the plant of the sales order also.
Could you please elaborate more what do you mean by this statement?
Cheers
KK

Inter Plant Planning

HI All,
I have got 3 Plants PL01, PL02, PL03 where material is undergoing some operation in pl01 and then it is passed to PL02 for another operation and then is passed to PL03 for final operation.
How can I do interplant planning and do capacity levelling
Regards
Amit

>
AMIT AGGARWAL wrote:
> I have my sequence as follows
>
> Pl03 Operation - Pl02 oper - subcontract 1 - subcontract 2 - PL01
>
> After PL01 I am geting FG. I am trying to use SPK 40 and SPK 30
> Pl guide me abt this
Material code:
Create a separate material code for Each transfer , SUb contracting dependets on the scenario
In plant - PL03
Consider your are producing material 1
Maintain procurement type E , and do the production
Plant- PL02
Consider your are producing Material1 --> Material 2
Maintain Procurement type F and maintain a SPK( create a new one in OPPQ) from PL02 for material 1
For material 2 maintain Procurement type E
SUB CONTRACTING
IN case operation subcontracting maintain in Routing
Or other wise
Consider Material 2--> material 3
Create a BOM for Material 3--> assign the material 2
maintain Procurement type F and SPK 30 for material 3
and the same for Other subcontracting material
Consider Material 3--> material 4
Create a BOM for Material 4--> assign the material 3
maintain Procurement type F and SPK 30 for material 4
IN PL01 Plant
Maintain Procurement type F and maintain a SPK (from PL02) for material 4
Run a MRP for material 4 in plant PL01 system will plan all the materialin other plant also
Or
Other wise maintain a scope of planning
in a sequence
PL01
PL02
Pl03
System will plan accordingly

Planning Run through MD01

I was trying to take planning run for several plants,
made necessary config in spro, but unable to generate plan orders,
when i taking planning run through MD02, Plan order for material is generated, Kindly help me to find where i have missed the settings, no error is cooming when i am taking planning run

Hello Abhay,
MD01 is not advisable to run for all plants (if you are working with scope of planning). Run the same from MDBT transaction in background and check the spool log once this MRP finish...This will be better advisable from SAP. here you will come to know which materials are planned or which are not.
1) Check the controller parameters are same of your MD02 and MD01 to create planned orders.
2) Check indicator 3 delete and recreate data in controller parameter for MD01.
3) Check planned all components from the sane screen.
4) Run with regenerative planning if it is first time.
Run the job from SE38 with variant to create plannig file entries for all parts in plants.
Check whether MRP area activate check box is active or not in customizing...check the same whether plant level MRP indicator activated in customizing.
Please let me know whether your problem is solved. Thanks
Regsrds...
TAJUDDIN

Scenario Planning..

Hi friends..
   Is scenario planning a new function avialable in CRM 5.0 ?
     When is scenario planning useful..? have any one used this functionallity..?
      If yes any example by which it is easy to understand...
Regards,
sanjana

hello Sanjana,
Scenario planning is done to compare which Marketing project grouped under a scenario would be an idealistic choice for optimum return.
A Scenario set is created and the relevand Accrual model is selected and planned start and end dates are mentioned. We add projects in the scenario and move them from Scenario scope to planning scope, we define a couple of other scenarios with marketing Projects grouped under them and we do a comparative analysis by selecting the appropriate accrual model.
Hope this helps.
Please reward points.
regards,
Muralidhar Prasad.C

Scope of planning MD 01

Similar Messages

Maybe you are looking for