Scoping out Sharepoint - Is it possible to run web apps in the same domain as a web page? (ie not with references to a cloud)

From what I understand, with sharepoint it is possible to run web apps on the server that don't need to be referenced via the cloud, ie in contrast to SkyDrive.
If so, would it be possible to create a web site on the share point server that embeds say a word web app in a page, all done in the one server, on the same domain?
Thanks

Hi,
First Office Web Apps and SharePoint can't be installed in one server as it's not supported. So you need at least two servers - one for SharePoint and another for Office Web Apps. About 'word web app', As far as I know you can run word app/excel app runs
in either word/excel but not inside Office Web Apps.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com

Similar Messages

  • Midp 2.0: is it possible to run 2 timers at the same time?

    elo! jz wondering if its possible to run 2 timers at the same time..

    actually, im going to use the first timer for the character's animation such as walking.. the other timer i'll use for timing the 'walking activity' of the character (let's say, 3 seconds walking).. after 3 seconds, the character will stop and do other activity aside from walking..
    p.s.
    im mentioning about timers in midp 2.0 :)

  • My MacBook is almost two years old and has started running really slow. It gets bogged down when it is running different programs at the same time, like Safari and Pages. It didn't react this way until recently. Any advice would be very welcome.

    My MacBook is almost two years old and has started running really slow. It gets bogged down when it is running different programs at the same time, like Safari and Pages. It didn't react this way until recently. Any advice would be very welcome.

    Launch Disk Utility and select the icon of the internal drive (the drive itself, not the volume icons below it.) Is the SMART status "Verified?" If not, replace the drive immediately. If the status is "Verified," the drive may still be failing. Back up all data, if you haven't already done so. Reinstall Mac OS X, then run Software Update. Test with all wired peripherals disconnected. If it's still slow, you have a hardware problem.
    Mac OS X 10.6 Help: Reinstalling Mac OS X

  • Is it possible to run two applications at the same time on ipad.

    Hi,
    I would like to know of it is possible to play media apps (movies or bbc iplayer programs) while surfing the Internet with safari on ipad2. Even if I can't actually see the video while I'm surfing the net but can still hear it and can jump between the Internet and the movie without the movie stopping.
    Somehow I think the answer to this is no but then I also thought it wasn't possible to do print screen images with ipad until someone showed me how.
    Can anyone help?
    Thanks :)
    Locard

    Prior to iOS 6, it was possible to "multitask" with some media like playing audio from YouTube video while playing a game or surfing the web, but it changed in iOS 6.
    There are always a few surprises in major iOS releases, so who knows, it might work again in iOS 7. I never set my expectations for anything other than what Apple talks about publicly, but like I said, you never know.

  • Is It Possible To Run 2 Routers At The Same Time.

    This might be the dumbest question of all time but I am not computer savy. My two wireless PCs operate beautifully on my Linksys WRT54G. If, when I get the MacBook Pro, and for some strange reason I have connection proglems, can I get one of the airports and set it up just for the Mac. Read all sorts of problems of PCs not connecting to the Airports properly. I might be overly concerned but I don't have an Apple Store near me. I am driving 200 miles to Charlotte to justr try out and buy the Mac.

    You can put two routers on the same network, but you have to set them up correctly. You can put one of them in bridge mode, which means it will just act as an access point for the primary router, but won't do any routing itself. The second way is to set up a double NAT, with one router handling the Internet connection to the outside world and the second router handling the local network.

  • Is it possible to recharge multiple iPhones on the same computer but have each iPhone backed up with its own data?

    I have multiple iphones, one for personal use and one for work.  I would like to backup and recharge both on my MacBook Pro but do not want the information on the personal one to be on the work one.  My personal iPhone is 64 GB and the work one is 16 GB so the data from my personal iPhone would would not fit on the work iPhone  Both are running iOS 7.1.2 and the MBP is 10.9.4

    Disable automatic syncing - http://ipod.about.com/od/iphoneipodbattery/qt/disable-auto-sync.htm e.g. for charging device on another computer.

  • Running 2 apps at the same time

    My wife has an ipad2 that she loves, but she just updated the  ios to 6.1.3 from 6.0, thanks to me, and now she is really upset.  She "use" to be able to listen to audio from Youtube on Safari, bad youtube apps, and also be able to play games at the same time. Now with this upgrade, she can't do this, the audio just shuts off when she starts the game.  She aleady knows the process of starting the youtube video then doubl clicking the home button to bring up th menu at the bottom of the page and then starting her game, but the new iOS just shuts off what she was listening to.  Is there a fix for this or an easy work around??  We don't want to jailbreak either, because we shouldn't have to.
    do the newer ipads handle multiple apps running at the same time better with the faster chips??

    Hi Tim,
    I'm a little confused by this, if you listen to music from the Music app on the iPad this should still keep playing when doing other stuff but anything playing in Safari that I've had playing has always turned off when switching between apps.
    Regards,
    Steve

  • Is it possible to run process chain from the certain process/point?

    Hello
    Is it possible to run process chain from the certain process?
    How?
    Thanks

    Hello,
    yes it possible! use the following steps.
    1. Goto the process which you want the chain to start from.Goto display messages>> Chain tab. In the generated instance note the variant and instance.
    2. Goto table RSPROCESSLOG and give variant and instance and get logid details.
    3. t codese37>> run FM RSPROCESSFINISH.
    4. give the deatils u have got in RSPROCESSLOG table here and say execute.
    This will solve ur problem.
    Hope this helps!
    Reg
    Deepmala

  • It keeps saying running out of disk space need to delete some photos and videos but i already cleared out all my photos and videos and it keeps saying the same thing

    it keeps saying running out of disk space need to delete some photos and videos but i already cleared out all my photos and videos and it keeps saying the same thing.

    Connect the iPod to your computer. Click on the iPod under Devices and iTunes. How large is the "other" category as shown in the colored bargraph? If larger than about 3/4 GB, restore the iPod. That large of "other" indicates corrupted files.

  • How to run two icalenders on the same computer?

    How can i run two separate icalenders on the same computer? I have my own icalender with work, home, etc, and it's totally full. I am now running an artists collective and will publish the collectives icalender on the web. I don't, however, want to mix what will be a pretty busy calender with my own already too full one. Is it possible to run two totally separate calenders on the same computer?
    macbook   Mac OS X (10.4.8)  

    trsv,
    Welcome to Apple Discussions.
    Create two Groups...
    Calendar 1:
    Work
    Home
    etc
    Calendar 2:
    Collective Calendar
    You can then switch which groups you wish to display by activating/deactivating the check mark in the Calendar source window.
    That will also allow you to selectively publish the Collective Calendar.
    ;~)

  • Is it possible to have multiple SOA Server within same domain ?

    Hi All
    I need to know whether I can install and setup multiple soa_servers inside the same domain so that they can be managed by single weblogic instance.
    The use case scenario :
    We have a single DEV environment instance that has several environments configured with it like PR1, PR2, TR, PY, PC.
    The way we have achieved it is by creating partitions under soa_infra and deploying the code as we move up the ladder in testing phases before we move to separate QA and Prod.
    Because of the way Dev is being setup, we are not able to use/test Oracle B2B properly because there is no way to have environment specific distinction be created in Oracle B2B.
    In essence, at any point in time testing can happen only in one environment for out Dev box because it makes call to Oracle B2B (Trading Partners) and there is no way for us to distinguish whether the call is coming from PR1 or PR2 or PC or TR or PY.
    We have no issue testing it as long as it is not restricted to B2B but with B2B we are restricted because a single soa instance has a single B2b instance. ( We can not have partition wise instances of B2B)
    Requirement :
    Is it possible to install and configure different soa_server for.e.g
    soa_server1 : PR1
    soa_server2 : PR2
    soa_server3 : PY
    soa_server4 : PC
    soa_server5 : TR
    inside the same domain (dev_domain) so that they can be managed from single weblogic instance through Admin console and we can have different B2B instances for each soa_server.
    This way we will be able to differentiate between environments on the basis of ports with the same IP address.
    Please let me know if there is a possibility of achieving the same.
    Thank you so much in advance.
    Regards
    ACM

    Thanks Sharmela for your directions.
    Let me try to clone the soa server and see if it helps.
    Before I move forward, I would like to verify one thing from you.
    As you have mentioned the word "cluster" , I am not exactly trying to achieve the clustered setup "conventional way of load balancing and high availability" but instead I want to have these cloned soa servers( soa_server1 : 8001,soa_server2 : 8002,soa_server3 : 8003,soa_server4 : 8004,soa_server5:8005 )to have separate partitions ( PR1, PR2, PY, TR,PC) respectively.
    I hope I don't have to configure OHS to access these nodes since I want these nodes be available as a separate instance rather than redirecting load in case of any other becoming unresponsive ( OHS configuration)
    I am not sure whether I am making sense but all I need to do is point the PR1 instance having it's own port number(8001) to the PR1 instance of ERP.
    I think it is doable but just wanted to double check with you.
    Please let me know
    Thank you

  • Disallow running multiple instances of the same web start application..

    on the client? I have an application that is launched on the client by clicking on the link to the JNLP file. The problem is that I don't want the application to launch twice if the user clicks the link twice. Is there a way to keep web start from running multiple instances of the same app?
    I don't want to just disable the button after it is clicked because then the user won't be able to get back in if they need to.
    Any help out there?
    Thanks,
    Melanie

    The way I do this is to try connect to an obscure port number on the localhost at startup.
    if this connection succeeds I assume the app is already running. otherwise the program continues and registers as a server at that port number.
    I actually take this a little bit further by registering a web server at this port (I use the Brazil server), That way if the program finds an instance of itself running it can send a message to the web server and ask the program to do something (like start another window if,for instance you wanted to allow this but only within the same VM).

  • Running two instances of Windows Server 2012 Essentials R2 on the same domain

    We have Windows Server 2012 Essentials R2 running as a domain controller -- and have installed another licensed copy of the same thing on the same domain.  We want to use the 2nd server for running an LOB application and provide backup for the
    AD services. 
    The 2nd server is a member of the domain. Can I do this and have the 2nd server provide AD failover services like they do with 2012 Standard? 

    Two things to consider. In the XP and 2003 era, the OS was not written in a security-first fashion. While XP did have LUA, almost nobody used them. Then came Vista and UAC, and those prompts were a major pain point because nobody wrote for security. Fast
    forward 6 years and standard accounts are a normal best practice. Almost nobody in business recommends running daily tasks as administrator.
    I mention all this to illustrate that, similar to admin accounts, what you used to get away with no longer applies. Running LOB apps on a DC is just bad. Many times, the app just doesn't work. But even if you could get it to work, it is a terrible idea.
    If the stories of Home Depot, Target, and most recently Sony don't already give it away, I'll spell it out. We no longer live in an age where you can take shortcuts and expect to be safe. Large organizations make national news when they screw up. But small
    businesses are targeted just as often and are at just as much risk. From "leaking" their client info to having their data held for ransom, the small business is abused regularly, but never makes national news because they are, by definition, small.
    If you can take simple easy steps to help minimize that risk, such as keeping a domain controller free of other software and locked down, then it is almost unethical to do Otherwise in the modern computing era. The world ha changed. It is our responsibility
    as I.T professionals to change with it. That's why we get to call ourselves "professionals" in relation to I.T.
    So, what bad things? Risking the customer's very livelihood. I consider that pretty darn bad.

  • Running Multiple Web Dispatchers On The Same Server

    Is it possible to run multiple instances of Web Dispatcher on the same server?  I want to have one instance pointing to my WAS 6.40 system and the other instance pointing to my BW system.  I have set up two services on the NT server:  One named the standard sapwebdisp.exe and the other named sapwebdispbw.exe.  I am using two separate profile files, one for each instance.  The services start O.K.  However, when I attempt to access my BW system using the HTTP port as defined in the BW profile and the Web Dispatcher profile, I get a message back saying that "The server you are attempting to access has refused the connection with the gateway. This usually results from trying to connect to a service that is inactive on the server."  I have double checked that the service is running and that the BW system is up and available.
    Any help is appreciated.
    Regards,
    Doug

    Hey guys,
    it seems you are web dispatcher specialists
    I have problems connecting even one server
    I would like to add an Enterprise portal (DEP) to the web dispatcher.
    My config file :
    SAPSYSTEMNAME = SDM
    SAPGLOBALHOST = webdispatch
    SAPSYSTEM = 00
    INSTANCE_NAME = W00
    DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
    DIR_EXECUTABLE = $(DIR_CT_RUN)
    Accesssability of Message Server
    rdisp/mshost = 172.20.40.6
    ms/http_port = 8101
    Configuration for medium scenario
    icm/max_conn = 500
    icm/max_sockets = 1024
    icm/req_queue_len = 500
    icm/min_threads = 10
    icm/max_threads = 50
    mpi/total_size_MB = 80
    SAP Web Dispatcher Ports
    icm/server_port_0 = PROT=HTTP,PORT=80, TIMEOUT=120, EXTBIND=1, TIMEOUT=120, PROCTIMEOUT=120
    Is it possible for you to paste your config file here ? 
    With explanation what the portal name is en waht the web dispatcher name is ?
    The error I get :
    no valid destination server available for '!ALL' rc=7
    Where can I adjust this !ALL and !J2EE group ?
    Where can I manage the /link/ ? (like /irj/portal)
    If you need any info please let me know.
    THank you for your time & help
    BUD

  • Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

    Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
    I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
    TIA,
    Jerry

    Thanks, Martin.
    Good to hear someone has had success. The lack of it here is frustrating and depressing.
    Thanks again,
    Jerry

Maybe you are looking for