Score Editor: why wont chords paste on other parts?

Whether in Page View or Linear View I cannot copy and paste chords on the Piano Part to other Instruments.
I select first chord on the piano part, then Select Similar objects and all the chords begin to wink, then Copy..
Then I select say the bass part .. or one of the horn parts and Control V does not paste anything.
Could it be to do with the position of the chords in the piano part between the two staves? ie that they are already in a certain graphic place and a single stave part ( ie bass or trombone or trumpet) cannot "see" the chords" or does not have space for them?
In which case how do you vertically and horizontally re-align them? The inspector does not seem to respond and just has a little star in that box
All suggestions welcome
M S

Caramby wrote:
You need to log-in to view this content. Therefore many people will not be able to see it. You could >copy & paste the relevant section into a new post if you would like to improve access.
To anyone reading this - it is as easy as pie to join Logic Pro Help. They are a very helpful bunch of guys and a useful alternative resource for Logic issues.
If you cant read the post I refer to with a link, and are really interested in the answer .. just join them - it is as easy as joining here
PS The answer to my question about Chord Pasting is very specific and technical to the Score Editor and with great respect to all the answers here, they are guesses in the dark from people who do not use the Score Editor in the way I am trying to use it.
Please guys, check out Ski's response on LPH ... he really knows what he is talking about
Message was edited by: musicspirit

Similar Messages

  • After installing Ios8 my iphone wont get past the "icloud part" of the setup phase.

    So i installed IOS8 off my macbook pro onto my iphone 5 (not iphone 5s) and waited a couple minutes for it to finish, everything went smooth untill it finished. and i opened and unlocked my iphone. I first connected to Wifi which worked no problem. Then it said "To finish setting up ICloud enter the Apple ID password for (my apple ID)" so i enter the password Correctly and it will switch pages for about 2-3 seconds and say "updating your ICloud settings" but then it will just turn off the screen and go back to the Welcome screen where i have to unlock the phone and do the whole process over again. I've tried skipping that step. Ive tried doing it connected to Wifi and not connected, I've left it over night and tried again in the mornning, no luck. Please help!

    You won't be able to check your email without adding it, but if you're stuck at the welcome to mail screen, you should got to Settings>Mail Contacts Calendars and select your icloud account. Make sure that it's not asking you for a password or stuck on verifying.
    What I would do is select delete account from there and sign back into icloud

  • Score editor inserting notes.

    Hi Everyone
    Hope you're all keeping well. Please can some one help to explain how to insert a quaver note on a staff at the beginning of a bar or on the first beat of the bar with a minim on the same beat beneath it, I do know how to use the separation tool but I am having difficulty writing a quaver on the first beat instead I keep getting a crotchet. If anyone can help I'd really appreciate it take care.
    Tumahawk.

    There are two questions here: i) regarding the size of the note, quaver/crotchet etc ... depends on how the Score settings are displayed. Best thing is to read the manual if you want to do this in the Score Editor there are so many ways to do it and you need to get familiar with a couple of regular operations.
    i) ie the Song Position Line.. get used to placing this exactly in the bar where you want to insert a note.
    ii) Also the Event Editor: if you drag a note from the side of the score editor you need to look at the Event Editor to see exactly where you are placing it.
    iii) If you are using a midi keyboard to input the notes, then you need to set up key commands that would make the SPL move by the right increments, ie shift SPL a quaver, a crotchet etc.. and become familiar with the Key Command that shifts the SPL etc
    However if you just want to insert a note and drag it to the right size then the best place is the Matrix editor where you can see exactly how long the note length is... though the display of the note also depends on what your score settings are, so you may put in a quaver and if the Score Style show only crotchets, it will display a quaver as a crotchet.
    Regarding your second question about putting a minim on the same beat of the bar below a quaver.. you will need to explore the concept of Polyphonic voices and assign the line with the minim to a different midi channel
    This may all sound a bit complicated but the more familiar you get with the basics of the Score Editor the easier it will get

  • Why wont my battery charge past 95

    why wont my battery charge past 95%

    Battery may not show a full charge in Mac OS X
    If the battery icon in the Finder menu bar is set to show the percentage of charge , you might sometimes notice that the battery does not attain a full 100 percent charge when the power adapter is attached. This is normal behavior; battery life is maximized if charging is not continuously cycled on and off when the battery’s charge capacity is between 95 and 100 percent. When the battery level eventually drops below 95 percent, it will charge all the way to 100 percent.
    http://manuals.info.apple.com/en_US/MacBook_Pro_Users_Guide.pdf
    http://support.apple.com/kb/TS1909

  • Score Editor: Best chord symbol font?

    What is the best combination of 1) font and 2) size for Chord Root and Chord Extension? ...for jazz and pop parts
    PS Anybody notice if the Chord Symbol fonts/implementation has improved or changed in L8? I still have difficulty getting the chords looking really well sized and "professional" looking. Would appreciate a word from someone who really has nailed this aspect... ie font and actual size setting

    Thanks for your reply Mark .. but I am looking for some specific info here. I want to know what EXACT font and size is optimum - from someone who uses Logic's Score Editor to turn out parts for pro sessions/band parts etc.
    I have spent ages experimenting like you describe - but cannot find a combination of font and size that is really professional looking. Usually the accidental is too small or too large or too far away from the Root of the Chord. I am familiar with all the usual parameters in the Score preferences etc ... but the chord symbols still dont look that great to me. Usable yes .. but not great.
    If there is anyone out there with a specific favourite combination, I would much appreciate a word from you .. here -
    m s
    PS went through this same issue with L7 and wondered if there was something new in L8 that you had discovered

  • Score Editor: disappearing chord symbols

    Very annoyingly, after inserting chord symbols with the chord tool, the chord symbols have suddenly started disappearing after I TAB out of them to move to the next bar, or they disappear as soon as I click somewhere else to de-select.
    I cannot tell if this is a bug ( though I suspect it is) or some element of the score editor I am unaware of.
    After the chord disappears and I re-insert it. Same thing happens.
    Looking in the Event list shows that there are actually three chords inserted there as META events. But it seems they have disappeared for ever from the score...
    All suggestions appreciated.

    yo rohan.. you are indeed correct. Fiddling with the channel in the Event List cleared this up.
    cheers
    Adam
    PS can you now serve up some of that great coffee on the Event List ?

  • Microsoft office is installed on two user accounts. One account works fine, the other account keeps getting an error message. Why wont it work on both accounts?

    Microsoft office is installed on two user accounts. My husbands account works fine, but my account keeps getting an error message every time I try to open up a new document. Why wont it work on both accounts? How do I fix this?

    Hi Aubs,
    Without knowing what the error is, there's not much help we can provide....
    Cheers,
    GB

  • Invites to my calendar do not appear in my calendar on macbook pro running  Maverick, but appear on my other icloud syn ios 7 ipad and iphone. Why wont the invites show on Macbook Pro running Maverick?

    Invites to my calendar do not appear in my calendar on macbook pro running  Maverick, but appear on my other icloud synch ios 7 ipad and iphone.
    Why wont the invites show on Macbook Pro running Maverick?
    All other calendar events sync fine through Icloud.

    Hi Fundads,
    If you are having issues receiving calendar updates on your Mac, you may find the following article helpful:
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Regards,
    - Brenden

  • Imovie media browser only has one option, "Mobile". other videos had option for medium and small. mobile option wont import into iDVD. other videos gave me the Medium option, why not this one?

    help! imovie media browser only has one option, "Mobile". other videos had option for medium and small. mobile option wont import into iDVD. other videos gave me the Medium option, why not this one? need answers ASAP!

    That is your answer then.
    Large is 960x540
    Medium is 640x480 (or 720x480)
    Mobile is probably 480x272.
    It is offering you the sizes that make sense given the size of your source material.
    As a trick, you might try this. In your project, put a short 640x480 clip in the project as the first clip of the project. Then keep the rest of the project as is. See if it will let you share now in Medium. It will not look as good, because there are not enough pixels to cover the Medium size, but it might work.

  • Score editor: command z, bug?

    hi,
    I have a score with different time signatures: 3/8, 4/4, 7/7, 5/16, etc.
    Every time I press command+Z logic erases nearly all of my time signatures (and the last action I wanted to "undo" it isn't of course the addition of the time signatures logic erases )
    Is it a bug?
    thanks

    Hi Ko be
    I just tried opening in L8 an L7 song which has several key signature changes 4/4 to 7/4 to 4/3 and Command + Z doesnt erase them...
    I would be pretty sure that your problem is one of those bugs which occurs from a corruption within a Logic 8 document.. but is not a 'generic' L8 defect.
    L8 score editor - although improved in some ways - has driven me nuts with really simple weird bugs which L7 never used to do .. eg:
    • clicking on a chord symbol ( to bring up the box for editing different elements root/bass note etc) sometimes takes ages to activate - or when it does then the whole part disappears and you are left with a grey page which says " there is nothing in the score editor"
    • another intermittent bug is rubber banding a group of chord symbols to cut and paste simple, or drag alter alignment - just does not not work and the chords dont let themselves be selected and go into flashing mode. This is unbelievably irritating especially when you are expecting something so simple to work as before
    • the other method of selecting - holding shift and clicking on chord symbols to select a group doesnt work
    All this kind of stuff intermittent... ie you never know which Logic Song it is going to start behaving badly in
    all best
    M S

  • Font in Score Editor

    I made a lead sheet using the Logic the other day, and I have a question about it.
    The default typeface for chord symbol extensions is Times. This is fine, except when there are flats or sharps in the extensions (e.g. G7b5 or whatever). Using Times, of course, these extensions are shown as the letter b, sharps as pound signs.
    I know Logic uses the AScore font for stuff, but if I use that (or AScoreParts), the extensions get all messed up. Do I have any options for using Logic's internal stuff for this, or do I have to use an external music font? For what it's worth, I know that works, but I'd rather not have to do that if I can avoid it.
    Thanks!

    deb1806 wrote:
    Is there a simple way of changing the value of a note in Score Editor?
    Since representation of MIDI nots are is visually quantized in the Score window, the best solution is IMO to have both a score and a piano roll window open at the same time when you edit note lengths in Logic. At least if you want accurate edits.
    Alternatively, you could open the integrated HyperEditor in the Score window: you can't edit lengths there, but you can see them, and edit them using the Length parameter in the Inspector. However - if you do this, your edits won't be updated graphically until you release your mouse, and the method isn't very useful for editing notes played at the same time.
    If you edit manually played notes using the Nudge commands, you can risk creating overlapping notes, which could create results you don't want (overlapping notes).
    I used to use the score window for editing exclusively, but after having gotten used to using the piano roll, which both lets you see the velocity of each note and perform accurate edits of each note length, going back to editing in the Score window feels a little bit like with a fighting in the blind- which is why I use two windows combined.
    These Piano Roll and the Score window will never be 100% aligned (bar wise or playhead wise), but who knows, maybe we'll see an integrated solution one which lets you edit note lengths graphically in the score window - in one way or the other. This idea (see image below) wasn't bad at all...
    http://www.studio-central.com/images/notate2.gif

  • Score editor / sibelius

    Hi,
    I know there are many sibelius users here (due to the sometimes limited score editor in logic) so that is why i am asking the following:
    Is there a way to "paste at original position" in sibelius?
    Thnks in advance,
    K

    It should work OK.. A couple of years ago, I exported some Logic midi files into Finale without a problem.
    I would check Sibelius's preferences for importing midi files. Does it expect to see a bass on midi channel 2, drum on midi channel 10, melody on midi channel 1, etc. There is a GM standard, so that different applications and platforms can play midi files.
    Go back to the Logic file, and set up your channels accordingly. Often if you use Logics virtual instruments, you have everything on channel 1. Once you've set up your Logic midi tracks.. (Each instrument has to be on different midi channel) - Merge them into one region, and select the "export selection as midi file". If you don't Sibelius will see it as one big instrument, all parts, bass drums, guitar, melody, etc like being played on a piano. It will look and sound like chaos.
    When you've merged and exported your midi file, click on it's preview button from your finder. It will play it with quicktime on your desktop.. That should sound OK.. You should hear the different parts in appropriate voices. If this is all messed up, SIbelius won't know how to deal with it either.
    You may have to go back to the original Logic midi files, and put program numbers into each track (IE assign bass track to a GM bass patch, a piano part to a GM piano sound etc. ). Once you do this your merged exported midi file should be able to play in quicktime.
    Google online, and find a free midi sight, and download a file.. Play it from the desktop. Then drag it into Logic, It will divide itself into channels, and sometimes even assign instruments if it has proper PG's. Then look at the event list for each channel, and you will understand what it is doing..
    This may seem like a bit of work, but once you get used to it, it's easy. I sometimes move midi tracks between different programs to work on them. (ie. Logic and Band-in-a-box, Finale). It's pretty painless, once you get over the initial set-up issues

  • Is it possible to change the length of a note in the score editor?

    I thought I saw somewhere that it was now possible to adjust the length of a note in the score editor graphically, i.e. by clicking on the note and somehow adjust its length directly to change it from 1/4 note to 1/8 (for example).
    I don't want to do this by going over to the "Length" dialog on the left because I hate having to switch from thinking in terms of music notation and then having to think (temporarily) in MIDI ticks per beat, etc.
    I must admit that I'm finding it extremely frustrating to simply enter music into Logic in a score....I thought this was supposed to be one of its strengths but it seems to be providing amazing capabilities at the expense of ease of use for beginners.

    dhjdhj wrote:
    I thought I saw somewhere that it was now possible to adjust the length of a note in the score editor graphically, i.e. by clicking on the note and somehow adjust its length directly to change it from 1/4 note to 1/8 (for example).
    greetings dh... are you into Key Commands? There are two which will help you do the above in a trice:
    • Nudge Region/Event Length Right by SMPTE Frame
    • Nudge Region/Event Length Left by SMPTE Frame
    I set mine to the simple letter o and n
    - I click on a note and press o repeatedly.. it grows and grows longer and longer
    – I click on a note and press n repeatedly.. it shrinks and shrinks shorter and shorter
    All by little increments
    If you keep a Piano Roll window open while you do this, you can see the length do this exactly
    man, it is VERY quick and handy for changing the length of notes
    It really helps to have a view of the midi Piano Roll to cross check the exact length and position of the notes.
    Check out the Key Commands:
    • Set Next Higher division
    • Set Next lower division
    These change the note value in the transport bar near the time signature. Your time signature may be 4/4 but the "grid" on which the notes are appear in the Piano Roll could be displayed in quarter, 8th or 16th notes. If you experiment with these commands, then you can match the note lengths easily to the grid display visually (with the above nudge length commands)
    Also - you may like to experiment with the following 3 KEY Key Commands:
    1 • Nudge Region/Event Position Right by Nudge Value
    2 • Nudge Region/Event Position Left by Nudge Value
    This will move your selected notes forward in time or back in time according to the
    value that is set in the Transport bar - say it is 16ths .. then each press of the key will move the notes a 16th
    or if the value is 8th notes, then each press of the key forward or backwards will move the selected notes forward or back by this amount
    ... amazingly useful when you are taking a whole phrase and pasting it somewhere else, or if say you started to write a phrase in the Score Editor and you started on the wrong beat.. then you just Nudge back and forth
    3 • Set Nudge Value to Division
    .. this will in a trice change change the Nudge Value to whatever Note division value is set in the Transport bar
    HTH and forgive me if I have given you too much information
    ..problem is I spent too much time in the Transport Bar in Los Angeles last year drinking with the iSchwartz and other Logic reprobrates... you should join us some time

  • When i plug in my ipod to my PC it makes a sound like it doesnt accept it. on the ipod, it says connect to itunes because it was disabled many times. why wont it connect?P.S I know nothing about this kind of stuff

    when i plug in my ipod to my PC it makes a sound like it doesnt accept it. on the ipod, it says connect to itunes because it was disabled many times. why wont it connect?P.S I know nothing about this kind of stuff

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Power Mac G5 wont boot past the Apple Logo

    Mac: Power Mac G5 2.7Ghz DP w/ 4gb RAM (2x1gb, 4x512mb), Leopard
    Last week, I formated this computer and reinstalled OS X 10.5. I updated everything, reinstalled all my applications and replaced my documents. Everything was good for a couple days. I have and HP 1350 all-in-one printer (which HP no long has mac support for that model, so I can only use the scanner as a photocopier, but that's not the issue, it prints fine and I have printed files since the formatting) The printer is connect via USB to my Power Mac and then shared on my home network, wirelessly, with 2 other MacBooks and a 27" iMac. My roommate was trying to print something from his MacBook. In the printer queue on the MacBook, the file would say it was printing, but nothing would actually printer. When I went to the printer settings on the Power Mac, the dialog box said the printer was "in use." I reset the printer, nothing happened. I restarted the Power Mac, properly, and now the computer wont boot past the Apple logo. The spinning gear appears and spins for a minute or 2 and then it will just reboot on its own. It will just keep doing this in a continuous loop.
    I've tried to boot into safe mode (holding shift) but it still does the same thing.
    I manage to get the CD drive open by booting into open Firmware. I restarted the computer and was able to boot from the Leopard disc. I ran disk utility, and repaired the drive and the permission but everything was ok.
    I've unplugged any USB device connect but to no avail.
    I really don't want to reinstall Leopard again. it took almost 8 hours to install all the applications (such as Logic, Komplete 5, etc) and I had not setup time machine. There are some document files that I would prefer not to loose, but could deal with the loss.
    any suggestions?

    Ok, so I reinstalled Leopard, all my documents were in the "Previous Systems" folder, and the applications where present. I went to Software Updates to download all the need updates, which included 10.5.8, itunes, security fixes, etc. It notified my that I would have to restart. I click ok, everything was logged out and the updates started installing. As the computer restarted itself after the updates, i had the same issue again, where it would go to the Apple logo and then restart itself. The second time around, it just froze and the warning "You need to restart your computer" with the power logo in the background came up. So I manually restarted my computer and everything logged in correctly. I restarted it a couple time to see if I could duplicate the errors but everything keeps working properly. Now I'm kind of scare to restart my computer.
    Any suggestions as to why this would be happening? Is this most likely a software issue or a hardware issue? This never happened before I formatted last week. The last time I formatted the computer prior to that was less than a year ago.

Maybe you are looking for