Score from MIDI issues...

Can anyone tell me how to make MIDI transcribe CORRECTLY? What I mean is, I have MIDI notes on specific keys, and it is somehow scribing two of the same key hits on two different staffs. Why would this happen? I mean, MIDI uses standard keys...
For instance, I am trying to transcribe drums I have written in MIDI for my drummer. I have a fill consisting of 16th notes across toms, kick, and snare. The basic pattern is two 16ths on each drum (so two 16ths on each MIDI key) which should transcribe as two 16ths per staff line. It is putting the second 16 of two that should both be on the kick on two different staffs; the second being used for toms.
It almost looks like it isn't in the correct time either, as it is grouping 16ths in triplets, which they are now.
Sorry if this is confusing. It is for me as well. Any ideas?

Wait, I think I may have it. The way I programmed it with my controller before importing the MIDI to Logic was basically done double-time. I selected the hits and converted them to half speed, doubled the tempo, and viewed the score again and now it looks right. I guess I was confusing it with the tempo I set originally.
I'll poke around more to make sure, but I wanted to post this ASAP. If anyone has any other ideas, lemme know. I'd still think that the other way should have scored correctly.

Similar Messages

TS5167 iMac 27 Inch from mid 2011 with screen display issues

I have a iMac 27 Inch from mid 2011 with a 2.7Ghz Intel Core i5 processor and a AMD Radeon HD 6770M 512 MB video card. The screen has started to go dark on the left side whilst the right side is normal. Has anyone else had this issue? Is it the video card that is defect?
Thank you

Hello! I have a problem with the video card radeon 6970M, is the one that is described in this article ((((I'm from Ukraine, and I purchased my iMac 27 " in the United States. Can you do something to help me with this problem? In Ukraine are now very expensive to change the video card on the iMac, the dollar is very high, a new video card will be very expensive for me. I can't work right now on my computer (((
0E7247ABF86E
Wed Aug 27 13:47:26 2014
Machine-check capabilities: 0x0000000000000c09
family: 6 model: 42 stepping: 7 microcode: 40
signature: 0x206a7
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
9 error-reporting banks
Processor 0: IA32_MCG_STATUS: 0x0000000000000004
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e):   0x00003f7f81890b5f
IA32_MC3_MISC(0x40f):   0x000000000003ffff
Processor 1: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e):   0x00003f7f81890b5f
IA32_MC3_MISC(0x40f):   0x000000000003ffff
Processor 2: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e):   0x00003f7f82b44482
IA32_MC3_MISC(0x40f):   0x000000000003ffff
Processor 3: IA32_MCG_STATUS: 0x0000000000000004
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e):   0x00003f7f82b44482
IA32_MC3_MISC(0x40f):   0x000000000003ffff
panic(cpu 1 caller 0xffffff8000cdcad9): "Machine Check at 0x00007fff8c94b14a, registers:\n" "CR0: 0x0000000080010033, CR2: 0x00000001084a1000, CR3: 0x0000000045bac03a, CR4: 0x00000000000606e0\n" "RAX: 0x0000000000000000, RBX: 0x00007f993c100000, RCX: 0x00000000000002e5, RDX: 0x0000000000000008\n" "RSP: 0x00007fff5a355610, RBP: 0x00007fff5a355620, RSI: 0x00007f993c12e480, RDI: 0x000000010589f000\n" "R8: 0x00007f993c100000, R9: 0x00000000000002e4, R10: 0x0000000000001955, R11: 0x0000000000000000\n" "R12: 0x00007f993c12e480, R13: 0x000000010589f000, R14: 0x0000000000000000, R15: 0x00000000000275b4\n" "RFL: 0x0000000000000206, RIP: 0x00007fff8c94b14a, CS: 0x000000000000002b, SS: 0x0000000000000023\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2422.110.17/osfmk/i386/trap_native.c :168
Backtrace (CPU 1), Frame : Return Address
0xffffff81edc13dd0 : 0xffffff8000c22f79
0xffffff81edc13e50 : 0xffffff8000cdcad9
0xffffff81edc13fb0 : 0xffffff8000cf3fef
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide:     0x0000000000a00000
Kernel text base: 0xffffff8000c00000
System model name: iMac12,2 (Mac-942B59F58194171B)
System uptime in nanoseconds: 603458021016
last loaded kext at 243321867094: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f833bc000, size 65536)
last unloaded kext at 368833330215: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f833bc000, size 57344)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.14.28
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.kext.AMDFramebuffer 1.2.4
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleIntelHD3000Graphics 8.2.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.AMDRadeonX3000 1.2.4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleIntelSNBGraphicsFB 8.2.4
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.kext.AMD6000Controller 1.2.4
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AirPort.Atheros40 700.74.5
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.kext.triggers 1.0
com.apple.iokit.IOSurface 91.1
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothFamily 4.2.6f1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.iokit.IOAcceleratorFamily 98.22
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleThunderboltEDMSink 2.1.3
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMC 3.1.8
com.apple.kext.AMDSupport 1.2.4
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPOutAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1
com.apple.iokit.IOFireWireSBP2 4.2.6
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.3.1
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 683.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: iMac12,2, BootROM IM121.0047.B1F, 4 processors, Intel Core i7, 3.4 GHz, 16 GB, SMC 1.72f2
Graphics: AMD Radeon HD 6970M, AMD Radeon HD 6970M, PCIe, 2048 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393955353432382D3034322E413030472020
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393955353432382D3034322E413030472020
Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.74.0-P2P
Bluetooth: Version 4.2.6f1 14216, 3 services, 15 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: WDC WD1001FALS-403AA0, 1 TB
Serial ATA Device: KINGSTON SH103S3480G, 480,1 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Ext HDD 1021
USB Device: USB2.0 Hub
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: USB Device
USB Device: Razer Arctosa
USB Device: Internal Memory Card Reader
USB Device: IR Receiver
FireWire Device: My Book 111D, WD, Up to 800 Mb/sec
Thunderbolt Bus: iMac, Apple Inc., 22.1

Requesting Windows Experience Index scores from anyone running WIN 7 on either current-model 13" MBPs... Thanks!

Requesting Windows Experience Index scores from anyone running WIN 7 on either current-model 13" MBPs... Thanks!

Hi mchainmchainmch,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

How to create chord charts from midi using logic pro x

How to create chord charts from midi using logic pro x

Depending on what you mean by Chord charts (Tabs?)
Use the Score.......
http://help.apple.com/logicpro/mac/10/#lgcpf755d649

How can I export slideshows created in Aperture v3.3.2 from Mid-2009 MacBook Pro-17 to blank DVDs?

(Fifth futile attempt in two hours, before I learned there was a Post webpage – I’m new to ApSuppCom - and after I learned that I am not allowed to update previous content, so I had to back out, make a few changes, and start over.) How can I export slideshows created in Aperture v3.3.2 (complete with superimposed captions and music tracks) from Mid-2009 MacBook Pro-17 to blank DVDs ? (Some other specs: Mac OS Lion 10.7.5; Capacity 499.5 GB; Processor 2.8 GHz Intel Core 2 Duo; Memory 4GB 1067 MHz DDR3; Graphics NVIDIA GeForce 9400M 256MB)
I cannot do a copy (export) without various error messages appearing and the inevitable stoppage occurring. Always with the DVD Video Player final message reading, “Supported disc not available.” Advisors and Mac Geniuses at local Apple Stores have told me to try Roxio Toast. When I visited the Roxio website, and found numerous other company products, the descriptions all seemed to suggest that most of the apps shown can easily export videos to DVDs, but nothing was said about finished digital slide shows being exported. At future events soon, I hope to be handing out these finished DVDs (free) to the people in them. Any help will be greatly appreciated. A.Z.

How can I export slideshows created in Aperture v3.3.2 (complete with superimposed captions and music tracks) from Mid-2009 MacBook Pro-17 to blank DVDs ?
Aperture cannot burn slideshows to a DVD. It only can export a video of your slideshow.
In Aperture 3 you use the "Export" button in Aperture's slideshow project to render a video to a folder on your disk.
Then you use iDVD or another program to burn a video DVD.
I cannot do a copy (export) without various error messages appearing and the inevitable stoppage occurring. Always with the DVD Video Player final message reading, “Supported disc not available.”
Could you please describe the exact steps that are causing these error messages?
How are you exporting your slideshow from Aperture? Which settings are you using? And how are you importing the video to iDVD or Toast to burn a video DVD?
For more suggestions see Karsten Schlüter's user tip: How to create a video-DVD? (Macs without iDVD)

Is that possible to report score from a selected set of questions in a quiz?

Hi I am new to Captivate and SCORM. I've been reading the forum discussions and Lilybirl's blog, and learned a lot in the past few days. I wish someone could help me with this too:
We hope to design a course within a single captivate project which allows the following functions:
There are several pre-tests and one post-test. The scores from each pre-tests will be used for branching purpose. See, if one takes pre-test 1 and passes, then she will go to lecture 2; otherwise goes back to lecture 1; if one takes pre-test 2 and then passes, then she will go to lecture 3; otherwise go back to lecture 2; same for pre-test 3, 4, 5, .... Now I know that I can use a customized variable to realize this part. I can create a user varaible as pretest_score, and set it as 0 at the beginning of each pre-test; let it do the math everything the learner answers a question slide. Then at the end of each pre-test, jump based on the value of the pretest_score. Then for the post-test, the pretest_score will be set as 0 again, and the culculation will start from 0. It will also generate a customized report page to report scores on each pre-test and also on the post-test.
However, we wish to be able to pass only the final score on the post-test to the LMS. Since I read that most of quiz variables are read only. Is there any way I can get around this? Is there something in the SCORM package that I can change to the variable that I created so that I can pass this variable's value to the LMS?
Any suggestions would be very helpful.
Thank you very much.

Hi,
I do not describe it in the blog posts, but you could also set the scores of the pretest question slides to 0, and track those scores only with a user variable and advanced actions. That way the total score will have only the scores of the final test, where you attach score to those question slides. Only one annoying thing: the total number of questions will have all the questions included, same with the number used in the progress indicator. You'll have to avoid showing those numbers to the user, but if you can live with that, could be easier than to create custom question slides.
Lilybiri

Yoga 2 Pro - Wake From Sleep Issue

Hey Guys,
Just recently purchased a Y2P (i7 256gb) less than a week ago. The issue i am currently experiencing is when i wake the laptop from sleep, usually at least 15 mins of sleep, the laptop will come up but then the system is considerably laggy/slow & then becomes completely unresponsive so much to the point that it seems as if it freezes. I am not able to move the mouse (trackpad & usb mouse) & the keyboard buttons do not work/register anymore. Pressing the power button does not put the laptop back to sleep but i can still see everything on the screen from where i left off before closing the lid & the laptop goes into sleep mode. Only way i can recover from this issue is to do a hard reset by holding the power button until the machine powers off & then to boot it back up.
Also, i have updated the BIOS & did all the windows updates from a clean install of Windows 8.1 (different from a factory reset) in order to avoid the Superfish vulnerability. All the drivers have been installed as well (confirmed by the Device Manager).
Any other people experiencing the same problem & have any potential fix for this issue? Any help on this matter would be much appreciated.
Solved!
Go to Solution.

You can try this -
Go to Control Panel >> Power Options >> Change Plan Settings (For active plan)
Click on Change Advanced Power settings
Under Sleep option, Change the Hybrid Sleep option (to the opposite of whatever is set right now for both On Battery and Plugged In)
Also, not sure if fastboot is enabled on your laptop but you can try disabling it. Google "Disable fastboot in win 8.1" and you will get the results.
Let me know if any of those helped you.
Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
When your plans fail, your Real Story begins!!

Waking from sleep issues

Hi, I have a 17" G-5 i-sight imac, running os 10.4.8, and have been having wake from sleep issues similar to what others have posted. These first showed up in late August. About 25 % of the time, when waking the computer from sleep the screen remains black, and after about 10 seconds the fan starts running at full speed, The only way to stop this is to hold in the power key until the computer shuts down, and then restart. What's interesting is that this only seems to happen using my apple wireless keyboard and mouse; when using a usb keyboard and mouse there is no problem. Could this be a bluetooth-related problem? The bluetooth settings are all correct (allow bluetooth device to wake computer, etc). The apple care guy basically said he didn't know how to help me, and it's driving me crazy! The only wired keyboard/mouse I have is from my 233 bondi blue imac, so just using that to avoid the problem is not a good option. Please help!
Jerry

If your Mac happily goes to sleep but won't wake up--Hold down the power switch to force-reboot your machine and get it running again.
Don't worry-your Mac isn't narcoleptic. Its Open Firmware system or NVRAM (nonvolatile RAM) is likely corrupt, and your Mac can't remember how to wake up.
Restart your Mac and immediately hold down the Command-Option-O-F key combo until you see a somewhat intimidating command-line display that ends with the Open Fimware prompt. Type the following line:
reset-nvram
press the return key on your keyboard
set-defaults
press return
reset-all
press return
Your Mac will reboot. Once it's running, put it back to sleep to test. If the problem recurs your Energy Saver preferences may be the culprit. Delete the com.apple.PowerManagement.plist file (go to Finder/Hard drive/Library/Preferences/SystemConfiguration)--don't worry, your Mac will regenerate a new one--and then restart to see if that rights the wrong.
Still didn't work? Might be time to call AppleCare or see an Apple Genius or a technician.
Cheers!
DALE

Hello! I have some my violin recorded audio files and want them to be converted to printable notation throw "audio to score"from Factory. But do not have a normal result. Could someone help me, please. .

I have some my violin recorded audio files and want them to be converted to printable notation throw "audio to score"from Factory. But do not have a normal result. Could someone help me, please. .

seeren wrote:
Normal result is on the sloppy side of inaccurate.
Wish I'd started this topic so I could give you a green star!
Great description.

Mac Book Pro from mid 2009 compatability with Apple displays

Is my Mac Book Pro from mid 2009 compatible with the Apple Cinema 23" Displays from circa 2005?

Here is the link:
http://store.apple.com/us/browse/home/shop_accessories/all_accessories/cables_do cks#!
Make sure the pins are correct for it. There is DVI-D as well so you need to double check that you are purchasing the correct one.

Oracle10g database migration from MID to MIT

Dear all,
im currently doing the migration from production server (MID) to dev server (MIT).
i've use 2 method below but all encounted the error and fail to import. hope some one can point the error and explain the some of my problem.
1. used oracle exp and imp
full database.
- i've exp the full database and drop all the current R3 table by following selection syntax.
select 'drop table sapsr3.' ||table_name|| ';' from user_table.
- but some table fail to drop because some of the table name consist '//'
- after doing imp, R3 cannot be start and keep show yellow status.
- log file display 'waiting for termination icman'
Q1. is that the method i did is correct?
Q2. how do i drop the table which start from '//'
single table.
- i've exp a single table from database then imp.
- while i check on SQL+. the table exist and consist data.
- but when i check on GUI. the table doesn't exist.
Q3. is that the table imported is only import to oracle. but not R3?
Q4. how to make it completely update to R3?
2. used SAP brtools.
full database.
- i've export a complete database backup(MID) by selected
backup and recovery -> database backup -> backup device type (disk)
- then import the backup to MIT
restore and recovery->while dabase reset->select consistent database backup()->
check the status of database files()->restore control files and redolog files()->
restore data files() ->reset program status()
note: () means the whole process.
Q5. database restored from MID to MIT, but the MIT could not start R3. may i know what i miss to cross R3 could not start?
single table
- export single table thru segment management-> export table from MID.
- import single table thru segment management-> import table to MIT.
Q6. error show oracle_home didnt set. but i've check on system enviroment and oracle_home is there. and i double confirm the variable by enter 'set'. Oracle_home still there. should i set oracle_home in cmd again?
note: pls state which method is preferable and which question is answering.
thanks and appreciate from yours reply.

finish patch the r3load and add the dbs/ora/tnsname = <SID> in the tnsname.
but the error is still the same.
INFO 2009-08-17 18:48:29
Output of C:\usr\sap\MID\SYS\exe\uc\NTI386\R3load.exe -testconnect is written to the logfile R3load.exe.log.
WARNING 2009-08-17 18:48:29
Execution of the command "C:\usr\sap\MID\SYS\exe\uc\NTI386\R3load.exe -testconnect" finished with return code 2. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
C:\usr\sap\MID\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090817184829
C:\usr\sap\MID\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#20 $ SAP
C:\usr\sap\MID\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 7 2009 08:04:27
C:\usr\sap\MID\SYS\exe\uc\NTI386\R3load.exe -testconnect
DbSl Trace: Cannot connect: dbs/ora/tnsname in profile missing
(DB) ERROR: db_connect rc = 256
DbSl Trace: Cannot connect: dbs/ora/tnsname in profile missing
(DB) ERROR: DbSlErrorMsg rc = 29
C:\usr\sap\MID\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\MID\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090817184829
ERROR 2009-08-17 18:48:29
CJS-30023 Process call 'C:\usr\sap\MID\SYS\exe\uc\NTI386\R3load.exe -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
ERROR 2009-08-17 18:48:29
FCO-00011 The step testDatabaseConnection with step key |NW_Export|ind|ind|ind|ind|0|0|NW_ABAP_Export_Dialog|ind|ind|ind|ind|4|0|NW_ABAP_Export|ind|ind|ind|ind|0|0|testDatabaseConnection was executed with status ERROR .
INFO 2009-08-17 18:48:56
An error occured and the user decide to stop.\n Current step "|NW_Export|ind|ind|ind|ind|0|0|NW_ABAP_Export_Dialog|ind|ind|ind|ind|4|0|NW_ABAP_Export|ind|ind|ind|ind|0|0|testDatabaseConnection".

Problem: Socket connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time

Problem: Socket
connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time
Environment: -
OS:
Windows XP SP2/7
Code:
VC 6.0
Dll: MFC
Problem Description: -
We have written a utility program which create socket (Using windows standard method [MFC]), and then make connection with another service (List Display) running
on port 3334 in different machine and retrieve the required list data. This program was working fine in almost all the machines.
But, we have received a severe intermittent issue on two machines. Client is facing issue in displaying the list data from port 3334.
Attempt: -
First we tried to debug code, and we come to know that socket is not creating in utility program. So we tried to telnet on ListDisplay service port 3334 and we were surprised that we were able to telnet, then we opened some more
telnet window on same port 3334 around (6 to 8) window, and each cmd connected properly. But we were not able to create socket from utility program.
Problem is severe because issue is intermittent.
We have tried all the way, but we are not able to figure it out, that what can be the exact problem and what are the conditions, when utility program will not
connect with ListDisplay service on port 3334.
Kindly assist to resolve this issue. For any help, we would be really thankful.

Hi,
According to your description, it seems that you have created an utility program which is making connection with another service port 3334, however, two clients are facing issue in display the data list from port 3334.
Port: 3334/TCP
3334/TCP - Known port assignments (1 record found)
Service
Details
Source
directv-web
Direct TV Webcasting
IANA
Since the port 3334 is used by directv-web service, I'd like to suggest check this service it is working well on the problematic clients.
1. The client can be resolved in DNS well? Please run "nslookup" in the prompt command.
2. Is there any 3rd party application interrupting? Do test in clean boot.
2. Strongly suggest you run process monitor tool to analysis it.
I am looking forward to your reply if you have any updated on your side.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Unable to download/preview sounds or scores from Resource Central in Soundbooth CS5

I'm trying to download sounds and scores from Resource Central in Soundbooth CS5, but I get the following errors numbers:
(404) Error:0 when trying to download
(0) ioError:-1 when trying to preview
However, the online indicator is green and I am still able to view and search through the list of sounds/scores, so I am not sure what is causing the errors to occur. This didn't happen to me until after the start of May 2013.
I've tried restarting Soundbooth, but the problem still persists.
I'm running Soundbooth CS5 on 64-bit Windows 7.

It is probably simply gone. SB has long been deprecated and "start of May" sounds exactly like the files simply went offline. Haven't seen any announcements on that, but I'm sure they exist somewhere...
Mylenium

Creating Change request from an Issue

Hi, all.
We have created new transaction type for change request (SDCR at default) and have specified it for usage in parametre CHANGE_REQUEST in DNO_CUST04.
However, creation of a change request from a issue (problem) ignores this customisation. As has shown code research - the constant there is used.
Whether there are to it reasons or notices in the documentation?
Whether there was for you such problem and how you solved it?
Regards,
Konstantin

You need to maintain Transaction Types Mapping. Map your target procedure type (ZDCR) to your source procedure type (e.g. SLFN or ZLFN).
Do this in IMG task "Define Mapping Rules for Copy Control"

I have a mac osx 10.4.11 from mid 2007 how do I upgrade

I would like to upgrade my mac 10.4.11 from mid 2007 but am not really sure where to start! I am a little challenged in the computer world Thank you for any infromation you may have

Firstly, purchase OS X Snow Leopard from the Apple store and install it.
Then, your computer may be Mountain Lion compatible. Can you post the model number of your computer?

Score from MIDI issues...

Similar Messages

Maybe you are looking for