Score & Hyper Draw

When using hyperdraw in the score editor, the pop up menu that displays cc data does not appear. Anyone else have the same issue?

Hi
Go to View Hyperdraw:Articulation ID and select "any"
Then try to display Hyperdraw velocity
Note that the 'Articulation ID" option has disappeared ;-)
Now you see it
Now you don't.... but you do see Note velocity in Hyperdraw
CCT
Message was edited by: CCTM.... typo

Similar Messages

Hyper draw doesn't appear unless you set Hyperdraw/Articulation ID

From the last 2 or 3 version Logic has an annoying behaviour on score window: Hyper draw doesn't appear unless you set Hyperdraw/Articulation ID/Any or None...
This procedure has 3 minus points:
1. The editing is slowed down
2. Every time you close and reopen the score window YOU HAVE TO REDO IT!!!!
3. What is it for?.....
It was better before...

For Radeon 7000, you need to:
pacman -S xf86-video-ati
You need to load those modules in /etc/rc.conf:
MODULES=(agpgart via-agp)
And in xorg.conf:
Driver "radeon"

Unable to use Hyper Draw on some projects

I might be doing something wrong, but all of a sudden in one of the current projects I'm working on I can't use Hyper Draw in the Piano roll view. I can't see any current automation or draw any new modulation, sustain, volume etc. I have had to revert to using track automation, which works OK.
If I start up a new project I can use Hyper Draw in the Piano roll and it appears to work on other completed projects. Have I changed a setting or parameter in the project that it won't work in, or is it a known bug?

Bump. Anyone?

Delete hyper draws (volume and Pan)

How can hyper draws (volume aund pan) be deleted from audio files in Logic Pro?

Lots of CC's in this topic...

How to copy volume automation to expression in hyper draw?

I want to copy the volume automation I've drawn into a track and place it as expression data in hyper draw. Another way to accomplish this would be to create expression (controller 11) as another parameter in the automation parameter view then I could just copy the volume automation to expression automation. I'm missing a piece to the puzzle here somehow, I bet this can be done but haven't been able to find the way. Help for a neophyte if you please!

First go into Track>automation>convert track automation to region automation.
Then open the Hyper editor.
If your volume lane isn't there go into the Hyper menu and choose "create hyper set for current events" - or use the inspector.
Click the lane header, so the volume lane is selected, and in the same menu and choose "convert event definition" - change it to 11 in the right hand box that appears.

LIST of keystrokes\shortcuts to open windows, eg. mixer to hyper-draw?

I know it's somewhere in there, in that fat manual. I keep putting off the long look.
So much has changed since Logic 6. I'd love to know where to find the LIST of shortcuts to change windows - e.g. to jump from piano to mixer to hyper-draw.
And the shortcuts to bring up the individual tools.
All ears,
Ben

i've just seen this have a look at your other post
saves me typing it out again

Hyper Draw graph is invisible

Hi,
A new bug has come (possible with any Apple update). Sometimes the Hyper draw is invisible. An example is if you select a track, an object, open Piano roll, open Hyper draw for Velocity - you can't see the graph. Or if you change from one object to another - the graph will not update with that objects graph but instead becomes... invisible.
Any help is appreciated It used to work.
Best regards,
Robert

Do not close the matrix editor window. Each time you open the matrix editor it will resize the layout. You should read the chapter about "Screensets". This way your settings will be saved and you can easily switch between editors.
Eddie

Hyper draw velocity question

When I'm editing velocities using hyper draw, sometimes it moves all values up or down, and sometimes it moves all values closer or further from the middle (changing the dynamic range instead of changing all volumes in one direction). It seemed like it chose between the two based on where I grabbed the values, but I could never figure it out and I don't see it in the manual.
And this seems to have been a L7 thing, with L8 now I can't seem to do the one that changes dynamic range at all.
Can anyone lend a hand on this, it's been bugging me forever. Thanks.

Searching the L8 online manual for 'velocity tool' reveals this:
+All selected notes can be altered simultaneously; the differences in their respective velocity values will be retained. If the velocity value of any of the selected notes reaches an extreme value (0 or 127), none of the other selected notes can be adjusted further.+
+You can override this behavior by holding Option while dragging. This allows you to continue altering the velocity values until the selected (clicked) note reaches an extreme value. It goes without saying that this will alter the velocity relationship of this note to the other notes.+

Hyper draw volume on audio Logic Pro 8

Has the ability to add hyper draw volume changes on audio tracks/files gone in 8?
thanks
roop

yup, it has!

Very annoying issue: Hyper draw doesn't work in Score

The concerning display remains grey and no data appears on it....
Very very annoying.......

Hi
Go to View Hyperdraw:Articulation ID and select "any"
Then try to display Hyperdraw velocity
Note that the 'Articulation ID" option has disappeared ;-)
Now you see it
Now you don't.... but you do see Note velocity in Hyperdraw
CCT
Message was edited by: CCTM.... typo

Hyper draw graphic bug?

Can anyone confirm this? When I draw in hyper edit data or move track automation to a region, the display in the arrange page is one quarter note later than the data that shows up in the event list. Needless to say this makes editing data difficult.

I had this happen occasionally, also in a different way using the Marquee tool and the scissors differing fom the position of the mouse click. Seems like corrupted projects. What helped me sometimes is moving the Song position start from 0 1 1 1 to 1 1 1 1 although this should not at all affect the position of the tools being in sync with the timeline of the project. But this therapy not always works so this is an annoying issue happening from time to time.

Hyper-draw stops working?

Second or third time I've encountered this; the arrow doesn't do anything and the pen just enters all the data at the same value (in this case 92) no matter what I draw with it. Anyone else have this problem, and a solution?

I've had the same problem, were you able to resolve it? If so, would you share that with me?
Thanks,
Ron

Hyper Draw Bug or Operator Bug?

When using HyperDraw, in an Arrange or Matrix Window, I try to Shift-Select (by shift-clicking or rubber banding) a non-contiguous number of nodes, I will mostly get all nodes in between as well but sometimes shift-clicking makes no selection at all.
This is quite different from the description in the manual.
Maybe I have overlooked some setting elsewhere preventing what I need to do? I hope so.
Any suggestions?
I am using LP7.2.3.
Thanks very much,
Marius

Aarrgghh. I know part of the problem is that I don't quite grok Aperture's model yet. But, still, something is not right.
I had created a new project called "Trips". In that project I created an album. If I selected photos from the "All Photos" smart album, I could put them in that album in that other project. But the photos still weren't in that other project. Just the album. This seems wrong, but I'm not sure.
So, instead of creating a project called Trips, I created a top-level folder. In that, I created an album for my one trip. Once again, I could select photos from another project. When I dragged them to the new album, I got a green "+". But when I dropped them, nothing happened. But, if I drag them from "All Photos" it works.
That can't be right. If I can put photos from any project into an album, I should be able to do it from anywhere. If I can't, I shouldn't be able to do it from "All Photos." If anyone knows which is right, let me know. Also, if anyone knows how to file a bug, let me know -- I will file this one with a good use case description.
Thanks,
tim

Adjusting Curve Shape in Hyper Editor

Hello all,
Is there a way to adjust the curve/slope shape (more concave, more convex...etc) drawn in Hyper Editor like how we can do with the automation in arrange window?
thanks.

Why not use Expression CC#11 in HyperDraw which is available below the Piano Roll?
Click on the line a couple of times with the pointer tool: Once before the point where you want the note to fade and another at the end point of the fade. Drag this second point down with the pointer tool.
If there are more notes after this point that need to sound, then you need to click a third time at the existing level before you drag down the second point.
Read the User Manual chapter entitled "Using Hyper Draw in the Piano Roll Editor"

Hyper editor

Hi
in a bass line, (midi) i want one note to fade. In the hyper editor, i use the volume track and it works fine, only in the mixer the volume slider happily moves up and down acording to the volume of the hyper editors curve. To be able to control the overall volume of the bass again, i send that bass track to a bus.
Apple midi loops are full of that little white lines and the fader in the mixer never moves. Can i manage that too? I feel i make it over complicated and there is an easier way, is there?
Turning the region into an apple loop leaves me with the same result, the fader in the mixer still moves.
The manual has left me clue less.
Pra

Why not use Expression CC#11 in HyperDraw which is available below the Piano Roll?
Click on the line a couple of times with the pointer tool: Once before the point where you want the note to fade and another at the end point of the fade. Drag this second point down with the pointer tool.
If there are more notes after this point that need to sound, then you need to click a third time at the existing level before you drag down the second point.
Read the User Manual chapter entitled "Using Hyper Draw in the Piano Roll Editor"

Score & Hyper Draw

Similar Messages

Maybe you are looking for