Score usually go up at the beginning of the month?

Open Dates: Amex (Closed)Date Opened 06/01/2002  AmexDate Opened 05/01/2015  BarclaysDate Opened 05/01/2015  BarclaysDate Opened 07/01/2015  BoA (Closed)
Date Opened 06/01/2003  BoADate Opened 05/01/2015  Cap1Date Opened 06/01/2015  CBNADate Opened 07/01/2003  ChaseDate Opened 05/01/2015  CitiDate Opened 04/01/2015  Care Credit (Closed)
Date Opened 02/01/2010  Anyone see anything?  

NRB525 wrote:
anon123 wrote:
Canadian-In-Seattle wrote:
 Experian considers all your cards to have been opened on the 1st of the month in the month they were opened -- have a look at account opened date, you will see on EX that it's always the 1st, regardless of what the actual day was. This is true on EQ as well but I think TU actually uses the real opening day.  So...... Take a look at two things: What happened to the age of your OLDEST account on that one day? And what happened to your AAoA on that one day? Both those numbers at EQ change only on the 1st of a month. I would bet you find your answer as to why your score went up--something hit a nice round number? Good to know about inquiries affecting up to a year. Oldest Account 13.2 year(s) Date Opened 06/01/2002 (Closed on 4/15/15, but Experian treats this as 4/1/15?)
 Nex Oldest AccountDate Opened 07/01/2003 (Open) Average Account Age 4.1 year(s)  So doesn't seem to be there. It must be something that happened in August or September? I'll look around.Well, oldest cards are nice to know, but you have recent INQ. That implies recently opened CC as well.What are the opening dates for each of the newer cards, those under 2 years?My inquiry dae CAP ONE NADate Filed06/08/2015
AMEXDate Filed05/15/2015 CHASE CARDDate Filed05/14/2015
BK OF AMERDate Filed05/14/2015 CBNADate Filed04/15/2015

Similar Messages

  • Because you this loading firefox.exe like process from the beginning of the computer with a load from 38 to 42000 kb or like I can solve this problem

    because you this loading firefox.exe like process from the beginning of the computer with a load from 38 to 42000 kb or like I can solve this problem, atualmente when lighting the computer among the processes that are loaded when beginning the computer is a process of name firefox.exe with a load of between 30 and 50000 kb but I don't find to the registered firefox inside the programs to crgar from the beginning when entering for msconfig.exe my operating system is so far windows xp up-to-date sp3 and my firefox is 7.0.1 version in Spanish that is my native language.

    That seems very suspicious. Two suggestions.
    First, try Firefox's Safe Mode. This will let you work around problems with add-ons and perhaps help you identify things to remove so that Firefox goes back to normal.
    I recommend making a backup of your Firefox settings before starting in Safe Mode. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
    Next, try starting Firefox in Firefox
    [http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
    Does that work? If so, you may need to disable your add-ons and just bring the most essential ones back to life until you discover the problem one.
    Second thought: malware. You could supplement your usual security scans with these:
    Malwarebytes Anti-malware : http://www.malwarebytes.org/mbam.php
    SUPERAntiSpyware : http://www.superantispyware.com/
    HouseCall : http://housecall.trendmicro.com/
    Hope this helps.

  • Should Output parameters always be declare at the beginning of the Stored Procedure?

    Should Output parameters always be declare at the beginning of the Stored Procedure?

    Usually input parameters listed first followed by output parameters. This is just a custom, not a requirement.
    Blog: How to architect stored procedure parameters?
    BOL: http://msdn.microsoft.com/en-us/library/ms187926.aspx
    Kalman Toth Database & OLAP Architect
    SQL Server 2014 Database Design
    New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

  • I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area.  I have stayed with 10G since the beginning.  Most months I don't use the 10G.  Verizon has no problem with me paying for Data I don't

    I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area.  I have stayed with 10G since the beginning.  Most months I don't use the 10G.  Verizon has no problem with me paying for Data I don't use.  This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages.  I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time.  Lots of charges.....But I'm am getting no help.  Not even an offer of a payment plan to help me out.  I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!!     Does anybody have any suggestions on how to deal with them?   We are not wealthy....or I would just pay this and walk away......

    There is a big misconception in what customers believe a cell carrier is obligated to do.
    You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
    Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
    There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
    Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
    Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
    Good Luck

  • Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

    Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

    Thanks. I've tried this and apparently the template I'm using is one of those where it doesn't work. I've tried dragging it as well as cutting a pasting but it always travels back to the end of the book. Maybe I can try changing the template temporarily, move the preface page, and then convert back to the original template. I'll experiment a little.

  • Adding a new value at the beginning of the list

    Hi,
    I've a list of values which are hard coded in the 'Elements in List' property for a Combo Box. Now, I want to add a new value at the beginning of the list. It doesn't allow me to add one. I have to delete all values and re-enter from the first which includes the new one. Is there any way that I can add a new value at the beginning of the list without having to remove other values.
    Thanks in advance.
    -- Srinivas

    Hi ,
    In order to implement the appropriate moves you have to use the key combinations : 1) <shift>+<ctrl>+'<' for deletion of the current list item(where the cursor is located)
    2)<shift>+<ctrl>+'>' for appending a blank row in order to add a new element...
    Regards,
    Simon

  • When i open a new tab i want the cursor to be at the beginning of the url (it was until this latest update, now the cursor is at the end of the url)

    I have just taken the latest update to 22.0 from the last version.
    In the past when i opened up a new tab the cursor would jump to the beginning of the URL and i could start typing. Now the cursor goes to the back of the URL and i have to double click the URL to type in a new one.
    Let me try to be as clear as i can. I have had firebox set for long time so when i open a new tab google.com comes up, and google is also my home page.
    I have not installed any options for a long time either. And nothing that has to do with tabs.
    What i remember is as i opened a new tab the URL of it would turn blue and i could start typing in a new URL. Now when i open a new tab i see google.com come up in blue, then the url turns to https://www.google.com/ and the blue goes away and the cursor is at the end of the URL. I now have to double click the URL to type.

    I switched to the "about blank" and then use my home icon to get to Google.com
    It is not quit as good as it was but usable.
    I think you should add two new check boxes in options under "tabs"
    1 - When opening any new tab, put the focus of the cursor on the URL.
    2 - When opening any new tab, put the focus of the cursor on the search box.
    This will take care of the majority of people.

  • Am new at pages and cannot figure out how to insert a bullet where I want it in the text, not at the beginning of the paragraph.  Word was much easier for me

    Am new at this forum and also at pages and can't figure out how to insert a bullet where I want it in the text, not at the beginning of the paragraph.  I found word much easier to use.  Please help. Trying to do a resume.

    On a US keyboard it is Option + 8 (above the letters). •

  • Make an alert box at the beginning of every month

    I'm writing a budgeting tool and at midnight at the beginning of every month I want to pop up an alert saying it is the start of a new month and enable a button in jsp.
    I have tried a couple ways to do this. First I wanted to keep creating a calendar and check if the date was 1. But then this would be much more work than is needed.
    Next I tried to use the TimerTask class and set a boolean to true at the first of every month, but then I couldn't figure out how to make the javascript run when the run method of that thread executes. I tried using a while loop in the jsp page itself to check the boolean but this just caused the page to hang.
    A third idea I was trying is to have an invisble form with a hidden field using this boolean. I was trying to figure out a way to use onChange to trigger the javascript, but this would only work for some sort of visible input.
    Anyone have any exprience on scheduling a task like this at the beginning of every month or about how to force a page to reload at a specific time? Thanks.

    You could even put that in a frame with a form to navigate a seperate frame:
    //frameset
    <html>
    <frameset frameborder="0" framespacing="0" rows="26px,*">
    <frame scrolling="no" frameborder="0" marginheight="0"
        marginwidth="0" name="frameA" noresize src="testingB.jsp" />
    <frame scrolling="no" frameborder="0" marginheight="0"
        marginwidth="0" name="frameB" noresize src="http://www.google.com" />
    </frameset>
    </html>
    //then your time-important page (called testingB above)
    <html>
    <body>
        <script type="text/javascript">
            function navigate() {
              var navigateTo = document.forms[0].address.value;
              if (navigateTo.toLowerCase().indexOf("http://" == -1)) {
                  navigateTo = "http://"+navigateTo;
              parent.frameB.location.href = navigateTo;
              return false;
            function doAlert() {
                alert("Time to do Something");
                window.location.reload(); //so it will happen again next month.
    <%
        //When first created, the calendar points to now.
        Calendar cal = Calendar.getInstance();
        long curTime = cal.getTimeInMillis();
        //then, lets set it to the 1st day of the month, at 00:00:01.00 (1 second after midnight
        cal.set(Calendar.DAY_OF_MONTH, 1);
        cal.set(Calendar.HOUR_OF_DAY, 0);
        cal.set(Calendar.MINUTE, 0);
        cal.set(Calendar.SECOND, 1);
        cal.set(Calendar.MILLISECOND, 0);
        //finally, add a month to get the first second of next month
        cal.add(Calendar.Month, 1);
        long triggerTime = cal.getTimeInMillis();
    %>
            //set the doAlert to occur after the # of milliseconds between now and
    next month.
            setTimeout("doAlert()", <%= (triggerTime - curTime) %>);
        </script>
        //form will read address you type in input, and navigate the other frame there.
        <form onSubmit="navigate();" name="nav">
          <input type="text" name="address" size="100" style="margin:3px" />
          <input type="submit" name="Go" value="Go" style="margin:3px" />
        </form>
    </body>
    </html>

  • How do I get rid of dead time at the beginning of the song without messing with the timing of staggered entrances of various tracks/instrument?

    How do I get rid of dead time at the beginning of the song without messing with the timing of staggered entrances of various tracks/instrument?

    marykaymaas wrote:
    How do I get rid of dead time at the beginning of the song without messing with the timing of staggered entrances of various tracks/instrument?
    either Select All and drag to the left (turn on the Lock Automation menuItem if you have any automation curves)
    or
    use the Cycle Region to export the exact length you wish:
    http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Downloaded songs don't start at the beginning of the song, why?

    the songs i bought from itunes don't start at the beginning of the song,  it's just the preview clip.

    Been having the same problems myself. And I don't know about you but sometimes it'll take a while to get it to actually play the first song.

  • Blank page at the beginning of the report

    I have a Report with a Group Above. I wanted a new page when a new Group began, so I selected the Group and changed Page Break Before to yes. It did start a new page with each Group, BUT there is now a blank page at the beginning of the report. How do I get rid of the blank page?
    Thanks, Wayne

    Hi Wayne,
    I don't know whether the solution provided by Jrg works for you or not. But I solved the problem in a different way.
    Insted using a page break on a repeating frame, I placed a boilerplate item in a corner just below the frame with a " "(white space) and I set the boilerplace item's property "Page Break After/Before" to "Yes". You understand me? just cheating ;)
    That worked for me.
    Cheers,
    Gouri Sankar

  • How to create links that guide you to a specific title on the page and not the beginning of the page?

    I'm trying to create links so that when you click on a title in the table of contents it guides you to the title on the specific page. However, when I do that it always sends me to the beginning of the page even if the title is in the bottom. Anyone knows how to do if I want to get to the title and not to the beginning of the page? When I use Finereader it create links from the table of contents automatically and those links send me to the title no mater where it is on the page. I've tried do edit the settings to look like those links created in Finereader but it doesn't work.
    I'm using Adobe Acrobat XI on a Mac Book Air.
    Regards,
    Andreas

    In you first query you can only have 1 column listed in your subselect, used ResourceID.
    http://www.enhansoft.com/

  • The file adapter takes also the mark of the beginning of the file as a char

    Hi guys,
    I need to use the file adapter for sending data into XI.
    My first column of the CSV file contain ID of the objects of length 8 chars. But when the adapter takes also the beginning of the file, the length starts to be 9 chars.
    How is it possible to disallow to take this mark?
    I didn't find any parameter in the file adapter settings, which could solve this problem.
    Thanx for answer! (Points guaranteed )
    Peter

    Hi Peter,
             While configuring sender file adapter, you can do the following.
           1. While defining Parameters for Recordset Structures , you can make use of the recordsetstrucure.beginSeparator function which will take the first string in the file as a begin seperator.
      i guess this would help you.
    regards,
    Aravindh.

  • Extra Blank Line gets added at the Beginning of the file by File Adapter...

    Hello All,
    I have created an RFC to File Adapter scenario in PI 7,1 and I am using Content Conversion in the File Adapter to convert the payload structure to flat text file. The input Structure is simple as follows:
    <File>
    <FName>some file name</Fname>
    <Record>
      <Data>
          <Line>Text Lines</Line>
    </Date>
    </Record>
    </File>
    while using the following Content Conversion Parameters: While I have defined "Record" as Structure.
    Record.addHeaderLine   = 0
    Record.fieldSeparator      = 'nl'
    Record.endSeparator      = 'nl'
    Here everything is working fine except that the text file getting generated has a blank line at the beginning. I was thinking that by adding "Record.addHeaderLine   = 0" parameter, no header line will be added to the file but this seems to be not working. I tried to include the top element "File" with the same parameters and different combinations but was not able to achieve the result and it stopped the file creation altogether.
    So, I'll appreciate if anyone can suggest something to get rid of the this blank line at the beginning of the file.
    Regards,
    Athar

    Extra blank line is actually provided for the FNAME node, but not displayed because of it has different structure with Record node.
    Change the structure for FNAME to :
    <FName>
    <Data>
    <Line>some file name</Line>
    </Data
    </Fname>
    this way "some file name" will be dispalyed in the text file at the first line of file. To remove it use this trick, define the following values in Content Conversion Parameters:
    in the Recordset Structure : FName,Record
    FName.fieldFixedLengths     = 0
    FName.fixedLengthTooShortHandling =     Cut
    FNamee.fieldSeparator = '0'
    FName.endSeparator =     '0'
    Record.fieldSeparator = 'nl'
    Record.endSeparator = 'nl'
    Rgds,
    Triana

  • Premier Pro is adding frames in the beginning of the video

    Hello guys,
    I have the following problem with Premier Pro.
    1. Several videos with different frame rate (24 fps and 30 fps)
    2. I create new sequence 24 fps
    3. Import videos to project and set them all to 24 fps via Interpret Footage.
    4. Now I am adding video to sequence, but Premier is adding 3 frames in the beginning from totally different video.
    What is that?
    Record of my screen is here
    Adobe Premier adds 3 frames in the beginning of the videofile | Screencast-O-Matic - Free online screen recorder for ins…

    I'm not sure why or how PPro is inserting frames from a different clip. But before digging into that, it might be worth exploring why you're using Interpret Footage to change the frame rate. In case you're not aware, Premiere Pro manages mixed frame rates automatically, so you don't have to do anything if you want the 30fps clips to play at normal speed in a 24fps sequence. In fact, changing the frame rate changes a clip's duration and playback speed.

Maybe you are looking for