Score Window:  Thru Instrument no longer changes when changing tracks

Today is my 8th day working in the score window and all of the sudden the thru instrument no longer changes to the track (stave) selected in the score window.
What button/key command did I press and how do I get the previous behaviour back?

some of theswe 'inconsistencies' are there for a reason:
- because that is the way the program evolved
- because they are not inconsistencies on another level or work flow.
also you should be aware that logics philsophy is to be customizable. in general it is almost always possible to set something up so that it behave you would like or expect it to. there problems inherent with this kind of philosophy, but it is what makes logic unique and very flexible.
i would strongly advise you to start perusing the ley command list at every possible moment. reassign key commands so that they behave more consistently for you. for example i have developed my own heirarchy of key commands:
- single strokes for all the most commonly invoked key commands and opening of editors.
- any other editor or subeditor i will use the 'shift' modifier (ie for me shift means open...)
- then complex modifiers for actions that are quite drastic, such as merge etc.
i try to keep all KCs relevant to their function...so for example
c = convert
m = mute
q = open event editor (ok not that one so much)
finally, when in doubt customize, customize, customize.

Similar Messages

  • Position of items in a region changes when changing region display point

    Hi all,
    I encounter a strange behaviour of items when changing the display point of a reports region from default (Page Template Body (3)) to anything else.
    If set to Body (3), my items are correctly displayed above the report, but else they are displayed below.
    Changing the sequence numbers does not affect this.
    To clarify what I mean I created a sample application:
    http://apex.oracle.com/pls/otn/f?p=16478:1
    Is there any possiblity to influence whether items in a reports region are displayed below or above the report table? - I did not find anything...
    TIA,
    Felix

    If you read the description of those other regions you'll clearly see "items below region content" rather than "items above region content", like the page template body region #3.
    This is one limitation of the ApEx region templates that some would like to see improved - meaning, allowing for more flexibility.
    Earl

  • Entourage - Appointments change when changing time zone

    Hello There,
    When changing the time zone in Entourage all the appointments already entered do change as well.
    E.g. the appointment is 8 am. After changing the time zone by 4 hours, the appointment changes to 4 am
    I don't know why that is as it does not make any sense at all. Just because you change the time zone while travelling the time of your appointments don't change.
    What can I do to avoid he undesired change of appointments.
    Thanks

    Hi Tom!
    Don't change the timezone in Entourage once you have it set. Instead, change your Mac's timezone using the Date & Time System Preferences pane.
    The default timezone in Entourage is your reference point for new appointments only. For example, if you create an appointment at 9 a.m. CST, it's still going to occur at 9 a.m. CST even though you're really at 7 a.m. PST by your clock. If you intend to schedule an appointment that will occur while you're traveling schedule it for the time in your Entourage default timezone.
    Hope this helps! bill
    1 GHz Powerbook G4 Mac OS X (10.4.7)

  • Windows XP, Java and long filenames when running application from a server

    Hi,
    I've been struggling with this for a while, can't understand why Windows XP seems to give me 8.3-filenames with ~ (tilde) instead of the full file- and path-names.
    I've added a key in the registry, when a user right-clicks on a txt-file they get an option to open the file using my program. The key maps to:
    javaw.exe -jar "\\networkdrive\automapper.jar"  "\\networkdrive\Automapper.cfg" "%1"This basically means that javaw will be used to execute my automapper.jar and the automapper.cfg and filename/path will be added as parameters to my java-program. Notice that my jar-file resides on a network-server and not on my local machine. This works just fine though.
    However, when I read the supplied filename in my java-code it is always in Windows 8.3-format using ~ to represent the missing chars. This is not a huge problem since everything works. The problem is that I convert the file and save it with a different file-ending, but with the same name (before the suffix). This means that the user runs my program on:
    this_is_a_long_file_name.txtand ends up with his original file and my new file named something like:
    this_i~1.qqqwhich admittedly looks ugly.
    If I run the application locally on my machine everything works fine and the long file names seems to handled correctly. The problem only arises because the program is run from a server. This is a microsoft network, I do not know anything else about it, sorry.
    Now I know, this is not strictly java-related, but I'm running out of options here and thought that perhaps one of you have solved this before. An option would be that I myself convert the short-filename to a long one, if that is possible? Any pointers would be greatly appreciated! If you don't know the answer, but know a good place to ask I would appreciate that as well.

    It seems to me that if a File (in the java-sense) is created with a 8.3-path it retains that path, meaning that this code will always give the same result in both printLn-statements:
       System.out.Println("input: " + args[2]);
       File file = new File(args[2]
       System.out.Println("output: " + file.getName());will give the output
    input: very_long_file_name_here.txt
    output: very_long_file_name_here.txt
    or
    input: very_~1.txt
    output: very_~1.txt
    regards,
    martin

  • Session Restore isn't working!!!!!!!! Both my mac laptop and Windows 7 desktop no longer respond when I click "restore previous session" Please get this fixed asap, as it is my most used feature on FireFox!

    System Restore is not working!!! Both my mac laptop and now my Windows 7 desktop will not allow me to restore previous sessions.

    Try to use the "Restore Previous Session" entry in the History menu instead.
    See also:
    *[[/questions/892970#answer-271366]]

  • Why do my video timings, specially in the parts where there are titles get changed when changing the format in a file converter?

    Hi, i am currently working on a project in NSTC format but seem to have a technical problem. I have exported it (in wmv.) but i want to convert it to MP4 (iPod) and DVD format. Now, I have tried to convert the video with many pieces of software and they all seem to change my timings (e.g a title is shown before it should). This doesnt happen in the .wmv file but it seems to happen on both DVD and NSTC. Am I doing something wrong in premiere or is it another problem?
    Thanks in advance

    I am not sure that I am following. You have a Sequence in PrP, and have your Titles positioned and their Duration set, as you need. (I'm assuming Lower Thirds, or similar). Your preview verifies that everything is proper and satisfactory. Then, when you Export to certain formats, the Titles have "moved," so that they no longer accompany the proper visual from, say Video Track 1. Is that correct? If so, I am sorry to say that I have no idea how that could happen. I just want to get clarification on the exact problem, and will consider what could be afoot. Also, others will likely benefit from a bit more info.
    Good luck,
    Hunt

  • What are the things to be changed when changing page name, model, jws, etc?

    Hi Everyone,
    My jdev version is 11.1.2.3.0.
    I have developed one ADF application with one page and it is working fine.
    Now i need to change my page name so i modified and it is also working fine.
    But while deploying it gives error like model-viewcontroller already exists because previous application without changes is already there in server.
    without disturbing the previous application i need to deploy this changed application as a new application to the web logic server.
    For that what are all the changes i need to perform and where to perform?
    Please give suggestions.
    Thanks.

    You only need to change the webroot and the application name (you may try with the same application name, but I', not sure it works then).
    When you then deploy the server take the ear a new application.
    Timo

  • Automatic batch change when change in stock happened.

    hi dudes,
    i am having the requirement like when ever change in stock for a material after GR or GI, the batch number should be changed for whole quantity.
    plz respond asap with an advice.
    thanks and regards
    Robert.

    Get a Z program developed which gets trigerred when a Batch GR or GI is happened, this Z program should create a new batch, copy the characteristics of the old batch, and do a batch to batch transfer of stock for that material from old batch to new batch.
    Or to post a GR and GI you mean when GR is done to the same batch.
    Get a Z transaction for GR and GI with the link to the above scenario.

  • Fontface changes when changing html of text

    I have a textfield nested in a symbol and am using an Adobe web font (droid-sans). When I change the text inside the textbox with something like the following:
    sym.getSymbol("captionButton").$("textBox").html("Hide Captions");
    the fontFace APPEARS to go to some other sans font and seems bold from that point forward. Do I need to reset all the css properties of the fontface every time I change html text in a textbox. And if so, could someone tell me the correct sytax, given the action above?
    Thanks.

    You mean I have to break it again ;-) OK, I'll try to find a previous version. OK, I commented out the css setting on init and the css settings when the caption button is clicked.
    whoops. looks like a bad upload. I'll try again in a few minutes.
    OK, uploaded. Sorry I had to include some assets just so it would load but it's all in a zip file. Ironically, downloading it to test it, it doesn't change to bold but it does seem to change fontfamily so the concept is the same.
    https://www.dropbox.com/s/wzr5s3nb12uccu4/sample.zip

  • How to promt user to save changes when changing non-database fields?

    Hi,
    I have a form with two tabs. The datablock Block_1 on tab_2 is based on a database view. But all the displayed items of Block_1 are non-database items. Whenever a user changes some items in Block_1 and presses save button, the values from non_db items get copied to the db_items (based on view) and commit_form is called. This works fine.
    But the problem here is: after changing some items in block_1, if the user navigates to some other option/form from the menu , the form doesnt promt the user to 'save the changes' and all the changes made are lost. How can I fix that?
    I have a form level key-exit trigger, (which does not fire) with following code :-
    Declare
      X  Number;
      alert_is             alert;
    Begin
    If :System.Mode = 'ENTER-QUERY' Then
           Exit_Form;
    Else
      If :System.Form_Status In ('NEW','QUERY') Then
           alert_is := FIND_ALERT('TMPL_EXIT'); -- "Are you sure you want to exit?"
        X := Show_Alert('TMPL_EXIT');
        If X = Alert_Button1 Then
           Exit_Form(no_validate);
        End If;
        Else
           Exit_Form;
      End If;
    End If;
    End;

    Slava Natapov wrote:
    Samita wrote:
    Whenever a user changes some items in Block_1 and presses save button, the values from non_db items get copied to the db_items (based on view) and commit_form is called. Try to copy values to the db_items not in save button, but in WHEN-VALIDATE_ITEM of non_db items.- I created the non-db items becoz, it was asking me 'Do you want to save changes', even when I only queried data from the view (becoz i was doing some computations while displaying the items. and the form assumed that the DB items were begin changed ). Inorder to get rid of that problem, i used mirror_items (non-db) for all the db items.
    So under this scenario, when i copy values to the db_items in WHEN-VALIDATE_ITEM trigger of non_db items, the form considers the db_items are changed and asks 'Do you want to save changes' even when the user has not made any changes and only queried data.
    Edited by: Samita on Dec 9, 2009 10:12 AM

  • BOM Component changes when changes done in VC

    Hi All,
    When ever we are changing the characteristic values in Variant configuration, it result the component changes in the BOM.
    Please any body let us know how to find the what are the component changes in the BOM when we change any characteristic value in VC. Is there any FM or it will store in any table?
    Regards,
    Vasu.

    Sure Vasu,
    Find explanation on  this as below :
    BOM components are selected by making use of a special type of dependency called SELCETION CONDITIONS.
    If you want to find which BOM components will be selected on selecting which characteristic value, then follow the below given procedure :
    1. goto T.Code CS03.
    2.enter BOM header name , plant etc. and press enter.
    3. now you are in inside BOM.
    4. Select any BOM component for which you want to check when will it be selected during configuration.
    5. then, in top menu , choose  Extra --> Object Dependencies --> Assignments
    6. It will display all Object Dependencies assigned to that BOM component.
    7. Select the Dependency with type Selection Condition.
    8. Click on Dependency editor.
    9. It will show you the Dependency code
    10. when the condition as per this code is satisfied, the component is selected during configuration.
    Please revert back if you have any doubt.
    Reward Points.
    Regards,
    Gaurav Raghav.

  • Safari 5.0 - URL does not change when changing location

    I have noticed this on two Macs running 10.6.3. When moving between pages (eg, clicking on a link within a page, or using the Google search bar to locate and load a new page), the URL in the address bar does not change to the new location. It remains at the
    This applies whether the new page is within the same domain, or is at a different location.
    Specific test: Load http://news.bbc.co.uk in Safari. Towards the top left of the page, there's a link to the BBC home page, which should appear in the status bar as "http://www.bbc.co.uk". Clicking on it will send you to that page, but the URL will remain as the news subdomain. If you click to another tab, then click back, it'll then update correctly.
    Matt

    Hi Matt,
    MIght be corrupted Safari pref files.
    Go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop.
    Relaunch Safari and see if that makes a difference. If not, move the .plist file back to the Preferences folder. If Safari functions as it should, move that .plist file to the Trash.
    If the problem persists, go to ~/Library/Caches. From the com.apple.Safari folder move the "cache.db" file to the Trash. Relaunch Safari.
    Carolyn

  • Message read status not changing (when changed on the server)

    I have Mail set up to for Gmail using IMAP. I also have my iPhone set up for Gmail using IMAP. When a message gets marked as being read (either by reading it in Gmail, Mail or my iPhone) Mail does not update the status to read. If I read the message on Gmail or in Mail my iPhone updates the status to read. Shouldn't Mail update the status of the message to read when it changes on the server?

    Try - https://www.cibc.com/ca/personal.html
    https://cibc.com is not the same as https://www.cibc.com <br />The certificate is only valid for https://www.cibc.com , not https://cibc.com

  • Random changes when changing setting for individual slide in a slideshow

    I've used iPhoto for years and produced many slideshows. However, now when I try to use Ken Burns Effect for an individual slide, I click on the "start" area, adjust my slide, click on "end," and then iPhoto jumps to a totally different slide in the slideshow. When I go back to the slide I wanted to work with, nothing was saved, and the same random change of picture happens.
    Actually, the Ken Burns Effect hasn't worked correctly on ANY slide I've tried.
    Also, when I try to rearrange the slide order, the slides may stay in the correct order for a few seconds, but then a slide may jump four slides to the right (and again out of order). This behavior is strange and random. It is infuriating and I don't know what to do.
    Any help would be greatly appreciated.
    ALSO, when I export a slideshow with music, the song plays fine for a few minutes, but then another song starts and the two songs are playing on top of each other (actually, it may be the same song playing over itself too).
    What gives?!

    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    Regards
    TD

  • Component changes when changes done in VC

    Hi All,
    When ever we are changing the characteristic values in Variant configuration, it result the component changes in the BOM.
    Please any body let us know how to find the what are the component changes in the BOM when we change any characteristic value in VC. Is there any FM or it will store in any table?
    Regards,
    Vasu.

    Hi Anji,
    Thanks for your reply.
    The above FMs are returning only the characteristic changes. But i need to to find the Changed Components in BOM if the characteristic value changes. Plese give any other FM if you are having.
    Regards,
    Vasu.

Maybe you are looking for