Scorecard doesn't display data for some selections

Hi,
I have configured a scorecard to display detail data (product quantities for 4 quarters) based on different parameter (product code) selection in other master scorecard. The detail dashboard doesn't display data for all the product codes. It's weird even data is there for the same product code where the scorecard is mapped in the excel however doesn't display. Appreciate if any of you can help me to overcome the issue.
Technology: SAP Dashboard 4.1 SP4, Oracle 11g
Thanks,
Anurag

Hi Anurag
Have you taken an excel snapshot and checked if the master scorecard has the rows you expect to see in the detail sorecard?
Thanks
Runali

Similar Messages

Graph in BEX not displaying data for the selected range

Hi Gurus,
I am running a report for the calweek 200801-200840. But the graph is displaying value upto 200835. The data is available in the cube till 200840.
Please help!!
Thanks
Nisha

Hi Nisha,
Please check once again whether there is data for 200836 to 200840 for the corresponding selections and restrictions you have mentioned in the design of your query.
Regards,
Suresh

I have ios 7 and lately when im turning off cellular data for some apps when i leave settings and go back in they have turned on back again by themselves. It appears as if i cant turn off cellular data for the apps i want. Any tips?

I have ios 7 and lately when i go to settings-cellular and try to turn off cellular data for some apps it doesnt work. As i turn off cellular data for one app immideately after i exit settings and re-enter settings cellular data for that same app goes back on again by itself. That happens for most of my apps and is reqlly annoying. Whats more annoying is that when i am not using wifi even though the settings for cellular data for safari or facebook or some other app are turned on (since i cant turn them off as i mentioned) i get the message that cellular data is turned off for this app and i cant use the internet at all on cellular data. I have reset to factory settings and restored from backup and the problem persists. Is there some help or tips you can offer me?

Did you get anywhere with this? I'm considering wiping it and setting it up as a new device.

Index page CS4 doesn't display properly for google chrome users

index page CS4/ Dreamweaver doesn't display properly for google chrome users, shows as a blue page / version of Chrome is 17.0.963.56 m. version of flash is 11.1.102.62. Operating system is Version 6.1 (Build 7601, Service Pack 1). Javascript version 1.7. Quicktime is not installed.

www.pianofortemusicschool.com

How do I display lyrics for current selection in Itunes for windows?

How do I display lyrics for current selection in Itunes for windows? I have lyrics for many songs, am losing hearing and enjoy seeing the lyrics to remind me of my memory of the song...

try this.. http://www.lyricsplugin.com/
good luck.

Issue regarding condition pricing date as system date for some condition types in sales order

Hi
I have already created a sales order on 30.04.2014. Today I am adding new line item to sales order in VA02 transaction. in this order new line items condition pricing date for conditions JEX2,JECX should show as 12.06.2014. But currently it is showing as 30.04.2014. I need condition pricing date as system date for above conditions.
Regards
prashant

Hi
When I am changing pricing date VBKD-PRSDT in sales order header . It is changing the condition pricing date for all. Sales order is created on 04.06.2014. I have added line item 150 on 14.06.2014.
After adding line item 150 , there I have changed the pricing date as 14.06.2014. in sales A tab of item 150. But still it is taking from Sales order header date as 04.06.2014 for all conditions. But my requirement is for line item it should take as system date for some conditions like JEX2,JECX& JA1Y but for other conditions it will take as Order creation date. Please suggest. I have also attached screen shot below. please go through it.
Regards
PK
Sales order header change mode VA02
Here pricing date VBKD-PRSDT = 04.06.2016
Item change mode
I have added new line item 150 on 14.06.2014
Changed the condition pricing date to 14.06.2014 & saved
After saving I have gone to Va02 screen of line item 150
& there I have gone to condition pricing date field from item condition tab
for JEX2 condition type but still here condition pricing date is showing as
04.06.2014 as below.
Condition pricing date
My requirement is like this
For some particular conditions like JEX2 condition pricing date will take as system
date instead sales order creation date when I will add a new item 150 on
14.06.2014.but for other conditions it will show as order creation date for the
same line item 150 .

How to set Display Only for some records in CAT2 Worklist

Hi,
I have a requirement to modify an attributes for some records in the Worklist of CAT2.
We have an external system where we book our time. Weekly we import data from that external system into CATSDB using BAPI for every single employee.
We would like when the user wants to modify his time sheet to be able to add/modify all records except those which were imported from the external system. Which means that those records should be in Display only mode / grayed out / before release.
Is there any user exit or BADI that could help to modify that attribute and that will be triggered before displaying the Worklist ?
Please advise !
Thanks,
Stefan

I've solved the problem.
First I've added customer field in CI_CATSDB structure and when I am importing the data I am populating that field with 'X', which means that this is record from the external application.
I've created enhancement implementation in Function group->CATS, screen->2003 MODULE->D2000_MODIFY_LOOP, subroutine->modify_d2000_loop where I am checking the field mentioned above if it is 'X' I am modifying the screnn-output = off.
It works, thak you for your help.
Regards,
Stefan

BPM reporting not displaying data for newly added field

Hello All,
I have a BPM process up and running fine. I have added reporting for monitoring no. of context field. I have also created a VC model for displaying the BPM report data. However, VC application is displaying only the context field that I had selected initially during the New Reporting Datasource creation. It'd not display the reporting data for the field that I added later.
Please help

Hi Apoorva ,
Have you checked in the process repository whether your new process is activated or not?
Thanks & Regards,
Rohit

Problem while inserting data for some datatypes in Oracle 10g

Hi
I was trying to insert data in database for all the data types defined in Oracle 10g.
I was successful in maximum cases.
I was not able to insert data for following datatypes:
1 Long varraw
2 string
3 varraw
4 varnum
5 charz
6 unsigned int
7 native double
8 native float
Please put some light on it.
Thanks,
Gyanendra

Hi Subin,
You can try couple of things.
If your data is less than 32767, you can pass it to stored procedure and change it to clob type like
PROCEDURE CLOBQUERY
Param IN CLOB,
and you can call Procedure
EXECUTE CLOBQUERY '[Param.1]'
If your data is around than 1000000(32767*32), you can break the data in length of 32767 and pass it to param 1 to 32 like
EXECUTE CLOBQUERY '[Param.1][Param.2][Param.3]..[Param.32]'
Finally you can try to update jdbc drive.
check the link Link: [JDBC Limitation|http://confluence.atlassian.com/display/JIRA/UsingOracle10gdriverstosolvethe4000character+limitation]

Problem in displaying dates for replacement path with text variable

Hi all,
I have to display dates in sequence as descriptions for 15 columns based on the the date entered by the user in Bex Report.I managed to display date as description using text variable with replacement path for single column.I could not able to increment date for other descriptions.Could you please help me to solve this issue.Its urgent.
Ex: User enters 03/09/2007 then in the out put desciptions for the columns should be 03/09 04/09 05/09 ............ 17/09.
Thanks in advance.
Regards,
Mandadi.

Hi,
goto the properties of your KF and click on the variable button side to that of the description field and click on new/Create option.Enter the technical name description for the text variable and select Replacement path as the Processing type and in the nxt screen select Fiscal year as the replacement variable and in nxt screen specify as Key and provide offset values if necessary and click on finish.now select the variable by clickin on the variable button next to the description field.it comes after the description of the KF.Now run the query.
Thanks,
Sandeep

Value is displayed as -* for some cells though it has value

Hello
I have one report in which I am displaying amount for each cost center
(Hierarchy has been activated for cost center)
In report, for some cells it is displaying correct values for amount but for some cells it is displaying -*
but when I select on the same cell then I can see value for that cell in formula bar, but -* in the cell
hope I am clear
Please suggest any way to display values in all of the cells
Thanks & Regards

Hi,
You need to use currency conversion.
If you dont find a standard convertion formula available then you need to write your code for converting all currencies to INR.
Also check other SDN posts for currency conversion.
You are bound to find something.
I hope this would resolve your problem.
Thanks,
Kartik

Lumia 610 doesn't display notification for Outlook...

Hello, My Lumia 610 doesn't display notification (unread messages) for outlook when the screen is locked. However it does display the notification such as missed calls, text messages, face book messages, Gmails, Yahoo emails, Windows live emails. But nothing for Outlook. Can some one please help. Regards, Hussain

WIndows Phone 7.5 has a total of four positions where notifications can be shown on the lockscreen. If these are used further notifications are not shows. You can resolve this by clearing the existing notifications or link your inboxes which will result in the use of a single notification for new mail messages in any of the linked inboxes. You can find more information o this using this link.
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Background job not updating data for some steps of program

We have created a custom program and submitting the standard program RPRCCC_READ_KR1025
which is used for conversion of AMEX credit card files.
Since this program can update data for 1 company id at a time,we have created a background job
for that program with 10 steps and 10 variants of data related to 10 different company codes.
when this job is executed it is not updating data for all the 10 files , sometimes it updates 5,7,etc...
If we execute the other files which didnt update in job manually they are getting updated.
All the files executed with that program can be seen in PRTA transaction.
Regards,
Gautham.
Edit: Solved.
Since the standard program updates the database every time with commit work
there should be some time until the next database update,so we can use wait command
after the submit statement which will do the trick.
Edited by: Gautham Vangaveti on Aug 5, 2010 7:20 PM

Hi,
I mean B(Sub Assembly)
Item Rollup Flag
A No
--B Yes
---B1 No
---B2 No
---B3 No
--C Yes
In this case when we run cost rollup by giving item A, Oracle will consider below structure.
A
--C
Regards,
Sarvottam.

Clearing the displayed value for a SELECT-OPTION

How do I clear the displayed value of a SELECT-OPTION?
I have 2 SELECT-OPTIONs on my screen (standard basic report program screen). I use code like this to populate the drop-down boxes for each one.
=====
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_prgrp-low.
PERFORM fill_prgrp_values.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_prctr-low.
PERFORM fill_prctr_values.
=====
The value the user picks for the first SELECT-OPTION will affect what values I put in the drop-down list for the second SELECT-OPTION.
If a user enters a value for the second SELECT-OPTION, and then goes back and changes the value of the first SELECT-OPTION, then I want to do two things:
1. Create a new set of values for the drop-down list for the second SELECT-OPTION (no problem; working fine);
2. Clear the displayed value from the second SELECT-OPTION that the user entered previously. That value became invalid when the user picked a new value for the first SELECT-OPTION.
How do I clear that second displayed value?
I have tried CLEAR and REFRESH for the second variable using the formats s_prctr, s_prctr[], and s_prctr-low. They will erase the values of the internal table or part(s) of it, but the displayed value stays on the screen.
I need to clear out the displayed value so the user will either leave it blank or enter or select a new value.
I am using F4IF_INT_TABLE_VALUE_REQUEST to build the drop-down lists, and it works fine, but I do not see any function module to clear the displayed value off the screen.
Thanks for your help.

Sorry, but calling DYNP_VALUES_UPDATE did not work. This is how I coded it.
fld_reset_rcd-fieldname = 'S_PRCTR'.
fld_reset_rcd-stepl      = sy-stepl.
CLEAR fld_reset_rcd-fieldvalue.      " re-initialize s_prctr
CLEAR fld_reset_rcd-fieldinp.        " what goes in here?
APPEND fld_reset_rcd TO fld_reset_tbl.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
      dyname = 'ZFI_GL_BALANCE_NGL'
      dynumb = '1000'
    TABLES
      dynpfields = fld_reset_tbl
<Added code tags>
I have discovered that CLEAR and REFRESH of s_prctr will clear it somewhat. If I enter multiple values, ranges, etc., they will all be cleared, EXCEPT for the one single value that is displayed on the main screen. It is not cleared and it remains if you push the button to display the pop-up to enter ranges, etc.
To devrath.sampat -- Thanks for your example for building the drop-down list, but that is not the problem I am having. I am already able to build it just fine.
To repeat my problem, if I:
1. first enter / select a value for the first SELECT-OPTION s_prgrp
2. then enter / select a value for the second SELECT-OPTION s_prctr
3. And finally go back and select a new value of the first SELECT-OPTION s_prgrp from its drop-down list,
     when I do, the program needs to clear the value displayed on the main screen for the second SELECT-OPTION s_prctr (any additional values, ranges, etc., are cleared by CLEAR and REFRESH, if I go look; but not the value shown on the main screen).
Edited by: Scott Crosby on Feb 14, 2012 4:20 PM
Edited by: Suhas Saha on Feb 15, 2012 12:03 PM

Problem in displaying data for G/L Account in Tcode FAGLB03

Hi,
I am a abaper but my client is facing a strange problem in Tcode FAGLB03 that when it runs the tcode the data displayed for a purticular finanacial year then there are few months which remains blank in the display but the Carry Forward Balance is accurate.
In the similar way when we execute tcode for previous financial year it is displaying the data accurately and filling all the months columns in it.
Is there any way to present the missing data for that puritcular finanacial year?
Edited by: nav009 on Jan 3, 2010 10:04 AM

Hi,
Please check the same with your netweaver administrator(basis consultant). He would have the user name and pwd for the SAP support portal. You can view notes in SAP support portal.
SAP clearly says in the note that it is because of program error and you need to implement the correction notes.
Do involve your FI consultant and Basis consultant to resolve this issue.
Thanks
Aravind

Scorecard doesn't display data for some selections

Similar Messages

Maybe you are looking for