Scored !! a T7400 2.16 Core 2 duo on the cheap !! and now ....

Ok .... After many online searches, local calls to computer shops, etc. etc. .. I finally scored a cpu for my 1.66 T2300 powered T60.
   I was begining to loose hope I could find one and was considering lowering my sights to a 2.0 T7200 but I played the early bird this morning and got the worm.    T7400 inbound to me from Chicago as we speak .... $26 tested and working... Im all fired up and excited.
   What do I need to do now?   Bios update?? Is their a specific Date I should look for that will insure I have the right Bios?
   What are you guys doing when installing a used chip.. throw it in? clean off old Silver and re apply ?? new silver over old? Cleaning the used chip?

That's a very fine CPU, and an excellent deal.
My daughter has it in her T60 (see my signature) and it runs extremely well given the age of the T6x platform.
Enjoy the upgrade.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

I have an iMac 1.83 ghz Intel Core Duo. The sound is suddenly intermittent, the magic mouse erratic. I'm running OS X 10.6.8. How do I correct this? Will Lion run on this machine?

I have an iMac 1.83 GHZ Intel Core Duo. The sound is suddenly intermittent, the magic mouse erratic. I'm running OS X 10.6.8. How do I correct this?
Will Lion run on this machine?

Unless you have an intel core 2 duo processor or greater, you can not run Lion
General requirements-Lion
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space

Apart from backing up all docs, music, movies and pics, what else do I have to do before upgrading my 2007 24"iMac with 2.33 Core Duo/2 GB SDRAM and OSX 10.4.11 to Snow Leopard10.6.3? from

Apart from backing up all docs, music, movies and pics, what else do I have to do before upgrading my 2007 24"iMac with 2.33 Core Duo/2 GB SDRAM and OSX 10.4.11 to Snow Leopard10.6.3? from

In addition to the other suggestions, see:
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html

I bought iMac 27 quad core i7 last June. Last month i have noticed lots of dark patches on the screen and now they are growing more. i bought this from US but now i have moved to Kuwait. How much it cost to replace the screen?

I bought iMac 27 quad core i7 last June. Last month i have noticed lots of dark patches on the screen and now they are growing more. i bought this from US but now i have moved to Kuwait. How much it cost to replace the screen?

Mac and Mac models are picky about the RAM the Mac needs to see and use.
As you have found out, the 1067 speed RAM will not work in your year and model iMac.
You need the 1333 speed RAM.
If, you can return the RAM for a refund, do it!
If not, try online Mac RAM source and seller Crucial memory. They have a table that matches your Mac to the correct and reliable RAM. You may need to contact them to see whether or not they ship to South Africa, though.
If Crucial dpesn't work out, here's the specs for your year and model iMac that you need to seek out and purchase.
Maximum Memory
32 GB (Actual) 16 GB (Apple)
Memory Slots
4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM
Good Luck!

IMac Intel Core Duo - what software works and what doesn't???

So I decided to start this post/topic to get feedback from everyone who uses their Intel based iMac for all different reasons and all the various sortware that people use. This includes software, games, freeware and such.
Here's my 2 cents:
Adobe CS2 software works fine except for Adobe Version Cue2. In other words, thus far InDesign CS2, Illustrator CS2, Photoshop CS2 and ImageReady CS2 seem to work fine. Probably a bit slower than on the G5's but not noticeably different.
Anyone else have feedback on their software that you use daily???

Toast 7 works brilliant on my iMac Core Duo. A lot
better than my Powerbook G4.
EyeTV 2 is working fine on my Intel Core Duo as well.
I'm new to Mac, and bought an eyetv (PX-TV402U for Mac) with my iMac core duo. However, it doesn't run worth a hoot, can get some channels but lots of snow in picture. I'm sure I read somewhere on Plextor's site about a software issue with new core duo, but can't find it now and can't get a responce from Plextor. You say yours is working fine, is that because you have Toast 7? I'm stumped at the moment. Got any suggestions?

Mac mini Intel Core Duo fan very loud and runs at high speed all the time.

I purchased an "Open box" Mac mini Intel Core Duo, 1.66Ghz, 2G ram, 80G HD and SD a few days ago from Fry's.
It runs beautifully except the fan is very loud compared to any Mac my family has ever had. It is so loud that we were thinking of putting it under the desk.
The fan runs constantly, and I mean all the time, at a high speed. You can really feel the air coming out the exhaust vents. The case is always cool to the touch as is the exhaust air.
My aunt bought a similar Mac mini (But only 512Mb ram) the same day. Her's is very quiet. The case feels just slightly warm, not unlike other Mac mini's I've seen.
Should my Mac mini's fan be running this way?
Thanks,
llulua
BTW: The "open box" was sealed with a Fry's label and it said that this had a new warranty. Yet, checking the serial number, it said that it had about 260 days left. I guess Fry's is backing it?
Also, someone told me that perhaps the main wire from the fan to the logic board is disconnected.
eMac 1Ghz, iBook 500 dual usb, Mac mini 1.66Ghz Intel Core Duo 2g ram Mac OS X (10.4.8)
eMac 1Ghz, iBook 500 dual usb, Mac mini 1.66Ghz Intel Core Duo 2g ram Mac OS X (10.4.8)

Since you have 2 gigs of memory, my thoughts are that when the party (Fry's or the origianl purchaser) upgraded the memory, they neglected to reattach the wire at the front of the Mini under the IR receptor at the right front corner that regulates the fan speed. This wire must be unattached in order to upgrade the memory, and is probably why the original person brought it back, because of the fan noise resulting from failing to reattach the wire. If that wire is left unattached, the fan runs continually at high speed to protect the CPU and system in general. If you do not want to use a putty knife to open the Mini, take it back to Fry's and ask someone who is Mac savvy to open it and reattach the small plastic receptacle at the end of the wire into its socket at the right front of the machine. When I go to Fry's, I am always concerned because the employees allow people to pry keys off of the Apple notebooks, so don't expect that their employees to know or care about anything Mac.
Al PB 12" 1.5 Mac OS X (10.4.5)

MacBook Pro Core Duo - replaced the keyboard, now I've got no illumination

Think I've put this is the right forum now!! LOL!!
Any thoughts? No keyboard illumination after replacing my old keyboard with a brand new keyboard & top panel/trackpad.
Machine is a MBP 2 Gig Core Duo.
Could it be the ribbon connector that connects the keyboard to the trackpad? Or is it one of the other connectors?
Thanks in advance,
Dan

Thanks for the reply
I'd done it myself (out of warranty a LONG time ago!!LOL!)
Checked in the links - and it looks like everything is connected fine.
Downloaded Labtick, but even on full, no illumination at all.
I press F9/F10, and get a "no entry" sign on the screen (with a greyed-out keyboard brightness icon)
Any suggestions?
forgot to say, running 10.5.7
Dan
Message was edited by: esotericarmstrong

Upgrade to Leopard on Intel Core Duo IMAC with Parallels and VM Ware

I received my copy of Leopard 10.5.1 today but after reading so many installation reviews on various sites, including this one, I am hesitant to install it. I did purchase a 500G Lacie firewire drive only because someone suggested cloning my current drive, just in case. I needed the extra drive anyway. I read up making sure all the permissions are up to date, so I was going to boot to my Tiger disc to make sure everything is fine with the hard drive. I am not sure how to proceed.
Is there a way to have everything backed-up so that I don't have to reinstall everything over again?
I don't want to loose my settings either. Someone on one site said boot to Leopard to install, but I don't want to erase my current OS or files. Others say just put the Leopard disc in and go from there. Again, I'm not sure which menu items to activate.
Any links to step-by-step procedures for upgrading to Leopard would also be appreciated. Then I understand I have to upgrade to 10.5.2 and that may be a problem too.
Thanks,
Tim

1. Prepare your system for backup:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Prepare your new external hard drive:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
3. Create a bootable clone of your system to the external drive:
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
If you upgrade to Leopard I suggest you do so using Archive and Install rather than an Upgrade Install:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
You do not have to update to 10.5.2 immediately unless you want to. Software Update will present you with a number of updates that may be available. However, you can wait on these until you are satisfied everything is working as you'd expect. When you do decide to install the updates just be sure to repair the hard drive and permissions first as a precaution.

Can u put a core 2 duo cpu in a core duo MBP?

as above

I suppose you could if you're up to de-soldering 478 very small pins to remove the old Core Duo, cleaning the contacts, and resoldering the pins of the Core 2 Duo to your logic board.
MacBook Pro 17" 2.16GHz, 120GB, 2GB, Matte, 120GB USB Western Digital HDD Mac OS X (10.4.7) Windows Vista RC1 Dual-Boot iPod 5G 60GB Black

HT4628 I did the security update on 4-2-13 and now my airport card will not turn on. OS 10.6.8 Intel imac 4,1 core duo. My macbook pro did not have this issue and wifi here is working on that. Is there a setting that was changed? Thank you!

Airport card will not turn on after security update yesterday. worked normally (for the download of the update) until then. Wifi here works fine with my Macbook Pro right now so the issue is with the card / computer / software not the provider. Did the update change something?
OS 10.6.8 imac core duo. The indicator is on the tool bar but is empty.

Airport card will not turn on after security update yesterday. worked normally (for the download of the update) until then. Wifi here works fine with my Macbook Pro right now so the issue is with the card / computer / software not the provider. Did the update change something?
OS 10.6.8 imac core duo. The indicator is on the tool bar but is empty.

G4 iMac migrates to Intel Core Duo

I just migrated the contents of my 17” G4 iMac to a 20” Core Duo. The only piece of software that wouldn’t run on the new Mac was Nikon Capture 4.4.1; upon launching, it told me that it was missing necessary files. I reloaded the software from my original 4.0 discs. This time the error message said to click to go to PACE and run the installer, which I did. The installer claimed to run successfully, but NC4 still claimed to be missing files. At this point I went to the NikonUSA website and downloaded the NC4.2 updater. After running this and rebooting, NC4 ran just fine. I finally updated it back to V4.4.1, which also works properly.
Rosetta notwithstanding, compared to running NC4 on the G4, it’s much faster. Opening a D200 RAW file on the Core Duo is about as fast as opening a D2h file on the G4--not instantaneous, but reasonable at around 7 seconds. Same goes for edit files.
With 2 gigs of RAM on the Core Duo, NC doesn’t suck up all the memory, as it did on the 1 gig G4. No “page outs” when working on several RAW files at a time. This is much better performance than I had been expecting from it.
PSE3 work reasonably well, too. Faster than on the G4, at least.
While I was trying to get NC4 to work again, I did play around with iPhoto6. It seems very fast and has some interesting features, so I’ll probably start using it too.
All the included iLife6 programs seem to work well, and much faster than on the G4.
I had no problems with any peripherals except a very old USB CameraMate Compact Flash card reader, for which the OS X driver appears to no longer function. A no-name card reader I got for free from OMax works fine, though. So does my Epson 1650 flatbed ( I use PSE3 to access it), a QPS external firewire drive and an Epson 1270 printer. No problems with Wi-Fi or ethernet,either. When I plugged the ethernet cable fron the Core Duo into my Airport Extreme base, the computer automatically switched its settings from Airport to ethernet--neat!
This is the seventh Mac I’ve owned and the easiest migration so far. The improvements in performance and in the quality of the display greatly exceed my expectations.
Danny W.
20" iMac Intel Core Duo Mac OS X (10.4.6)

I just migrated the contents of my 17” G4 iMac to a 20” Core Duo. The only piece of software that wouldn’t run on the new Mac was Nikon Capture 4.4.1; upon launching, it told me that it was missing necessary files. I reloaded the software from my original 4.0 discs. This time the error message said to click to go to PACE and run the installer, which I did. The installer claimed to run successfully, but NC4 still claimed to be missing files. At this point I went to the NikonUSA website and downloaded the NC4.2 updater. After running this and rebooting, NC4 ran just fine. I finally updated it back to V4.4.1, which also works properly.
Rosetta notwithstanding, compared to running NC4 on the G4, it’s much faster. Opening a D200 RAW file on the Core Duo is about as fast as opening a D2h file on the G4--not instantaneous, but reasonable at around 7 seconds. Same goes for edit files.
With 2 gigs of RAM on the Core Duo, NC doesn’t suck up all the memory, as it did on the 1 gig G4. No “page outs” when working on several RAW files at a time. This is much better performance than I had been expecting from it.
PSE3 work reasonably well, too. Faster than on the G4, at least.
While I was trying to get NC4 to work again, I did play around with iPhoto6. It seems very fast and has some interesting features, so I’ll probably start using it too.
All the included iLife6 programs seem to work well, and much faster than on the G4.
I had no problems with any peripherals except a very old USB CameraMate Compact Flash card reader, for which the OS X driver appears to no longer function. A no-name card reader I got for free from OMax works fine, though. So does my Epson 1650 flatbed ( I use PSE3 to access it), a QPS external firewire drive and an Epson 1270 printer. No problems with Wi-Fi or ethernet,either. When I plugged the ethernet cable fron the Core Duo into my Airport Extreme base, the computer automatically switched its settings from Airport to ethernet--neat!
This is the seventh Mac I’ve owned and the easiest migration so far. The improvements in performance and in the quality of the display greatly exceed my expectations.
Danny W.
20" iMac Intel Core Duo Mac OS X (10.4.6)

PowerMac G5 vs iMac Intel Core Duo

Hello, I currently have a PowerMac G5 Dual Core and am thinking of getting another computer. I have a question. In terms of performance, what is faster, the G5 (Dual) on the PowerMac or the Intel Core Duo on the iMac (running at the same speed).
And at the bottomline, what would be the machine that I want for gaming, publishing, and video editing? The PowerMac G5 (Dual) or the iMac with Intel.
Thanks for the assistance!! Have a good one.
P.S. Are there any plans of releasing a PowerMac with an Intel processor.
PowerMac G5 Mac OS X (10.4.6)
PowerMac G5 Mac OS X (10.4.6)

(Oh...right...sorry for mentioning that) Thanks for hte response!
Anyways, I just want a computer that will not be outdated for a while. I don't want to purchase the G5, and then months down the road, not see the G5 in production anymore.
One thing about the iMac I'm not too fond of is the lack of upgradibility (or so it seems so). Due to it's size, it would be very difficult for someone to upgrade it's internal components.
I will be purchasing either today evening of tommorow, and I want to know what will be my best choice for the future, the iMac Intel Core Duo or the PowerMac G5.
I always thought of the PowerMac G5 as a beast, and I still do, but some of the latest reviews and benchmark tests I have seen have said that the iMac (with Intel Core Duo) has performed very close to the PowerMac.

Core Duo MacBook history

MacBook 2.0 Core Duo, not the current Core Duo 2 processor. I purchased this unit, refurbished directly from The Apple Store site. It shifted in it's packaging and arrived without any start-up discs. Right away it started to act up. I went through several kernel panics (which I hadn't seen in years) and it would just restart itself at a moment's notice. The restarting thing just kept going on and on. I tried other OS X.4 disks that I had, but they were all rejected. Apple support mailed me a set of disks and they were rejected by the MacBook also. At this point, I needed a computer fast, within 24 hours to send off with my wife on an international journey. I called Apple, told them my situation. I agreed to purchase another MacBook (new, from the local Apple Store) and they agreed to issue an RMA for full credit on the old unit.
The RMA never came. I had the person's name, a ticket number and her direct phone extension. She never returned my calls. I then took it up with American Express which I used to buy the unit. After a lengthy review, AMEX decided that the "bad" MacBook was mine and issued me a full credit. Wow! Except, Apple must really not want this machine back. They caved way too easily.
I asked around, and others mentioned that the original Core Duo MacBooks were "dogs". I kept hearing, "did it just keep restarting on you too?". Was this a knock on these units. The newer, 2.16 MacBook (Core Duo 2) works great. But, I now have a "free" MacBook. Is it worth trying to revive this thing, or are these just "dogs" as I have been told?

I have a core duo bought October 2006. One of the last made, a week 39 unit. I have had one problem with it. The battery was one of the bad batch and Apple replaced it with no problems. It has been one of the best computers I have ever had. I just installed a 320 GB hard drive and with that and Leopard it runs better than ever.
Accent Codes for the Macintosh

Photoshop CS 2 Update For Intel Core Duo?

Does anyone know if there will be an update to Photoshop CS2 to optimize the performance on an Intel Core Duo? The performance of Photoshop CS2 on my Mac Book definitely seems slower than on my older G4 Powerbook.

Hi
Have a look at this:
https://store2.adobe.com/cfusion/store/index.cfm?store=OLS-UK&view=olscat&catType=CSSUITES&catID=CSSUITES&nr=0#view=ols_cat&loc=engb&store=OLS-UK&catType=PRODUCTS&catID=PRODUCTS&catOID=1578503&nr=0
When you get to website, change Show Me to Creative Suite family.
I got an email saying CS3 is out.
Steve

Intel core duo v dual 2.0ghz ppc

Locked by an Apple Discussions Host
Stay on topic. Apple's discussion forums are here to help people use Apple products and technologies more effectively. Unless otherwise noted, don't add Submissions about nontechnical topics, including:
That Apple rumor you saw on another website.
Discussions of Apple policies or procedures.
Speculations/rumors about unannounced products.
Hi.. I’m fed up with all the hype about the new imac core duo being twice as fast as the imac g5 2.1ghz. A lot of the magazines are also saying yes the core duo beats the g5 at this, that, and the next thing. What I’d like to know is how would the core duo have compared in performance had Apple had put a dual core 2.0ghz g5 in the imac like it done with the power mac range.
Just a thought
Cheers
Gerry

I'm curious about this too. In addition to what Gerald says, I note that there's also no mention anywhere of how the new dual core Intel processors perform as compared with, say, the Pentium 4 or whatever number they are at now.
As for the heat business, I see in MacFormat this month that IBM have announced a 4ghz - 5ghz powerpc chip. Apparently they have even tested one running at 6ghz, that they now plan to go in servers. So the PowerPC chip doesn't seem to be dying out now.
I am going to have to upgrade my 6500/300 sometime in the near future and as the Intel chips are going to force me to lose all my Classic software anyway, it seems sensible to work out what all the options are, if you get my gist.
PM6500/300 (603e) Mac OS 9.1.x

Scored !! a T7400 2.16 Core 2 duo on the cheap !! and now ....

Similar Messages

Maybe you are looking for