SCORM 1.2 manifest file
Can zip and upload to SumTotal LMS, but manifest file does
not record test scores or completion of module.
Hi we use SumTotal, you need to change the order of the API:
Find the scorm_support1_2 Javascript file in the template
folder:
(Program
files>Adobe>Captivate3>Templates>Publish)
Changes the zero value to one on line 39 which looks like
this:
if(intAPISearchOrder==0) to look like this:
if(intAPISearchOrder==1)
ALSO: the SCORM settings within the project itself must be
'complete/incomplete', I have found that pass/fail doesnt work with
Sumtotal.
Save and re-publish your project, ready to re-load to
SumTotal.
Webbo
Similar Messages
-
Publishing in Captivate 3, SCORM 1.2, no manifest file...
I’m using Captivate 3, publishing to FLASH/SWF with SCORM 1.2 enabled. I’m only getting a zip with two swf files and nothing else.
I’ve selected Quiz Results only, Score to LMS as Percent, Report Pass/Fail with Reporting level as Interactions and score.
I’ve required Answer all – the user must answer every question to continue
Selected Allow user to review quiz, show score at end of quiz and show progress
In LMS Customization settings, nothing is selected.
When I access Advanced Interaction there are nothing but blank spaces in the Track Score column for the Quiz slides.
I believe this is why when I publish I’m not getting a manifest file, but I have run out of ideas.On your Quiz Settings select:
Status Representation
Incomplete-->Complete
Success/Completion Criteria
Report slides viewed = 100%
Uncheck Quiz
Uncheck Data to Report/Interation Data
Click the Advanced button and select "Set extit to normal after completion". -
when i publish a project in Captivate 2, the manifest file
that generates is titled 'breeze-manifest', and it won't import
into our Pathlore LMS... in the 'reporting' window i have the
'scorm' radio button selected and completed all the required fields
in the 'manifest' area... can anyone help me figure out why i'm
getting the breeze-manifest stuff instead of the manifest
information for the course?...Hi,
In Order to generate the imsmanifest.xml which will contain
the information for SCORM, you MUST have atleast one scoring object
in your project. That is either a question slide or any interactive
object (like button/click box) with tracking enabled.
To enable the tracking for an interactive object, go to the
reporting tab of the object (from object properties) and tick -
Include in Quiz and reporting.
After this when you publish the project with HTML you will
see the manifest XML file in the published location.
- -
Problem with manifest file and Plateau LMS
I have published a course with a quiz in SCORM 1.2 and tried
to upload to a Plateau LMS.
It seems that a "page cannot be found" message is the result
after upload and we try to launch the course. The course works
outside the LMS (when run locally on my computer).
The Plateau LMS support team tried to help, and found the
following: "There is something wrong with this manifest, though I
cannot ascertain what that is exactly. Most of the file name is in
the parameter field, which is causing the launch path to look like
this:
/content/apmm/cbcgis/mars/BRTMAIN/MARS?BRT%20Maintenance%20Template_%2020080226.htm=
Everything in the parameters field is placed after the
filename in a URLencoded querystring after the question mark that
you see above. it should look like this:
/content/apmm/cbcgis/mars/BRTMAIN/MARS BRT Maintenance
Template_ 20080226.htm"
Can anyone please help resolve this, or have any advice?
This is the first time we have tried uploading Captivate
courses to this LMS, and we have been having problems with the
manifest file in general. I have looked at all the material I can
find on publishing and the manifest file, but cannot seem to
resolve my issue.
Thanks
WarwickWarwick,
I have had this error with an Authorware set of SCORM files
when my LMS was looking for index.htm and I had named it index.html
- you wouldn't think that would cause an error but it did. I would
be more than happy to package a Captivate file of just a few
screens that works on my LMS (which is Learn.com's Learning
Center), and send you the SCORM files to test... That could be a
start anyhow. I will send you a private msg. with my e-mail
id. -
I am making a WBT where I need to use the scorm feature with Presenter and PowerPoint. I have looked at the help file for the instructions on what options to select for scorm and when I publish my presentation as a .pdf file I am not getting a manifest file with it. What am I doing wrong?
I don't believe that the PDF version will do SCORM reporting. Publish out a zip of the Flash version and you will be able to see the manifest file in that zip. (don't publish directly to your desktop or you will end up with about 20 files and folders that you have to keep track of).
-
Manifest.xml - Manifest file in Captivate 6
Hello,
I am publishing a course and uplaoding it to my LMS using SCORM 2004 and it says the Manifest file (manifest.xml) could not be found and the page thus cannot be found. Does anyone know how to fix this or could walk me through what I did wrong?If the Captivate publish dialog shows that it is zipping the files, then unzip one of them again yourself and see if you can see a file called imsmanifest.xml at the top level of the folder structure.
-
We have two Lic for Adobe Captivate2. When we try to package
a captivate demo using SCORM, only one lic will create the manifest
file for us. Both Lic were purchased at the same time. Please help.
We just found out that when we package the same captivate
file using captivate Macromedia captivate, all the necessary files
are created and loaded successfully into our LMS (Saba).
Unfortunatlly, I cannot say the same thing about Adobe
Captivate 2.AS I understand it, a manifest won't be generated if there's
nothing to
track. I always assumed that meant at least one interaction
had to be
marked as 'scored' and the Quiz Manager settings had to be
completed
(type of tracking, etc). I don't know if 'track by slide
views' means a
manifest will be generated or not...
But you're suggesting that on one system, without any scored
interactions and no Quiz Manager settings, that a manifest is
being
generated with just 'track by slide views' checked?
I'm not familiar enough to know if that's all that should be
needed, nor
if that option should result in a manifest.
A common workaround for content that needs to be viewed but
has no
'quiz' is to place a scored interaction on the first slide
that simply
says something like 'Click here to begin'. Since everyone
clicks to
start the course, they automatically score 100%, which can be
correlated
to a 'completed' status.
Erik
hxdabbas wrote:
> The settings are little bit different in both version. I
tried my best to come
> as close as possible. The zip file is produce but the
manifest file is not
> available. There is no quize to take. All I am trying to
do is track by slide
> views only option.
>
> I was told that there are some updates for Captivate 2
on the Adobe site that
> I cannot find.
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware -
Validating Manifest File Error
Upon publishing my file, I run it through the ReloadScormPlayer 1.2. and get the following error with the manifest file. Any ideas as what I need to do to fix this?
Problem validating manifest
(file:/D:/Documents%20and%20Settings/kawittrock/reload/reload-scorm-player/server/webapps/ reload-scorm-player/course-packages/2009%20Scoring/imsmanifest.xml: 95, 102): cvc-id.2: There are multiple occurrences of ID value 'ahs_cont_scor_062309'.
(file:/D:/Documents%20and%20Settings/kawittrock/reload/reload-scorm-player/server/webapps/ reload-scorm-player/course-packages/2009%20Scoring/imsmanifest.xml: 95, 102): cvc-attribute.3: The value 'ahs_cont_scor_062309' of attribute 'identifier' on element 'item' is not valid with respect to its type, 'ID'.Upon publishing my file, I run it through the ReloadScormPlayer 1.2. and get the following error with the manifest file. Any ideas as what I need to do to fix this?
Problem validating manifest
(file:/D:/Documents%20and%20Settings/kawittrock/reload/reload-scorm-player/server/webapps/ reload-scorm-player/course-packages/2009%20Scoring/imsmanifest.xml: 95, 102): cvc-id.2: There are multiple occurrences of ID value 'ahs_cont_scor_062309'.
(file:/D:/Documents%20and%20Settings/kawittrock/reload/reload-scorm-player/server/webapps/ reload-scorm-player/course-packages/2009%20Scoring/imsmanifest.xml: 95, 102): cvc-attribute.3: The value 'ahs_cont_scor_062309' of attribute 'identifier' on element 'item' is not valid with respect to its type, 'ID'. -
WLS 6.1, SP2, Error Deploying WAR, Manifest file problem
Hi,
When I moved to SP2 on 6.1, I am getting a new error while deploying a war file.
It looks from the stack trace that there is a problem with my manifest file, but
I am just taking the manifest file created by jdk1.3 jar utility - My META-INF
dir is empty before jarring. When opened in notepad, the cursor can go to the
start of the line below the blank line. I mention this in case that is the EOF,
and relevant to the problem. Any help is much appreciated.
Mike
Manifest File:
Manifest-Version: 1.0
Created-By: 1.3.1 (Sun Microsystems Inc.)
Stack Trace:
####<Feb 22, 2002 10:32:36 AM EST> <Info> <HTTP> <mdunbar> <myserver> <ExecuteThread:
'1' for queue: '__weblogic_admin_html_queue'> <system> <> <101031> <[WebAppServletContext(1118014,ipp,/ipp)]
extracting classfiles to C:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\WEB-INF\_tmp_war_myserver_myserver_ipp:>
####<Feb 22, 2002 10:32:36 AM EST> <Debug> <HTTP> <mdunbar> <myserver> <ExecuteThread:
'1' for queue: '__weblogic_admin_html_queue'> <system> <> <101158> <Exception
thrown while loading ipp: java.lang.StringIndexOutOfBoundsException: String index
out of range: -1>
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1525)
at weblogic.utils.jars.ManifestEntry.stream(ManifestEntry.java:166)
at weblogic.utils.jars.Manifest.stream(Manifest.java:78)
at weblogic.servlet.internal.WebAppHelper.resolveManifestName(WebAppHelper.java:398)
at weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.java:177)
at weblogic.servlet.internal.WebAppServletContext.extractClassFiles(WebAppServletContext.java:3405)
at weblogic.servlet.internal.WebAppServletContext.setDocroot(WebAppServletContext.java:3376)
at weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContext.java:862)
at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:815)
at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:428)
at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java:74)
at weblogic.j2ee.Application.addComponent(Application.java:163)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:329)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
at weblogic.management.mbeans.custom.WebServer.addWebDeployment(WebServer.java:76)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy32.addWebDeployment(Unknown Source)
at weblogic.management.configuration.WebServerMBean_CachingStub.addWebDeployment(WebServerMBean_CachingStub.java:1121)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:315)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:491)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:361)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:984)
at weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:971)
at weblogic.management.internal.DynamicMBeanImpl.add(DynamicMBeanImpl.java:956)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:648)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy98.addTarget(Unknown Source)
at weblogic.management.mbeans.custom.ApplicationManager.autoDeploy(ApplicationManager.java:867)
at weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:966)
at weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:886)
at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:802)
at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:733)
at weblogic.management.mbeans.custom.ApplicationManager.update(ApplicationManager.java:206)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy5.update(Unknown Source)
at weblogic.management.console.webapp._domain.__upload_app._jspService(__upload_app.java:149)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:241)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
at weblogic.management.console.actions.ForwardAction.perform(ForwardAction.java:35)
at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:171)
at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
####<Feb 22, 2002 10:32:36 AM EST> <Error> <J2EE> <mdunbar> <myserver> <ExecuteThread:
'1' for queue: '__weblogic_admin_html_queue'> <system> <> <160001> <Error deploying
application ipp: Could not load ipp>
####<Feb 22, 2002 10:32:36 AM EST> <Error> <Management> <mdunbar> <myserver> <ExecuteThread:
'1' for queue: '__weblogic_admin_html_queue'> <system> <> <141042> <Error deploying
application .\config\mydomain\applications\ipp.war: java.lang.reflect.UndeclaredThrowableException>I figured out what was causing this for me. Apparently, the new Manifest reader
classes in WLS SP2 are a lot pickier ( polite way of saying they dont handle exception
cases very well ;-) ). I had 2 third-party jar files in my WEB-INF/lib directory
whose manifests had issues that the Manifest reader could not handle. One of
them was a header line that wrapped and the other had extra lines at the end of
the file. I had to unjar them, fix the manifests, and re-jar them. the server
started up fine after that.
It might be nice if they provided a better error message than "String Index Out
Of Bounds: -1" for this problem, but hey, you can't have everything because where
would you put it :)
"Mike Dunbar" <[email protected]> wrote:
>
Hi,
When I moved to SP2 on 6.1, I am getting a new error while deploying
a war file.
It looks from the stack trace that there is a problem with my manifest
file, but
I am just taking the manifest file created by jdk1.3 jar utility - My
META-INF
dir is empty before jarring. When opened in notepad, the cursor can go
to the
start of the line below the blank line. I mention this in case that is
the EOF,
and relevant to the problem. Any help is much appreciated.
Mike
Manifest File:
Manifest-Version: 1.0
Created-By: 1.3.1 (Sun Microsystems Inc.)
Stack Trace:
####<Feb 22, 2002 10:32:36 AM EST> <Info> <HTTP> <mdunbar> <myserver>
<ExecuteThread:
'1' for queue: '__weblogic_admin_html_queue'> <system> <> <101031> <[WebAppServletContext(1118014,ipp,/ipp)]
extracting classfiles to C:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\WEB-INF\_tmp_war_myserver_myserver_ipp:>
####<Feb 22, 2002 10:32:36 AM EST> <Debug> <HTTP> <mdunbar> <myserver>
<ExecuteThread:
'1' for queue: '__weblogic_admin_html_queue'> <system> <> <101158> <Exception
thrown while loading ipp: java.lang.StringIndexOutOfBoundsException:
String index
out of range: -1>
java.lang.StringIndexOutOfBoundsException: String index out of range:
-1
at java.lang.String.substring(String.java:1525)
at weblogic.utils.jars.ManifestEntry.stream(ManifestEntry.java:166)
at weblogic.utils.jars.Manifest.stream(Manifest.java:78)
at weblogic.servlet.internal.WebAppHelper.resolveManifestName(WebAppHelper.java:398)
at weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.java:177)
at weblogic.servlet.internal.WebAppServletContext.extractClassFiles(WebAppServletContext.java:3405)
at weblogic.servlet.internal.WebAppServletContext.setDocroot(WebAppServletContext.java:3376)
at weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContext.java:862)
at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:815)
at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:428)
at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java:74)
at weblogic.j2ee.Application.addComponent(Application.java:163)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:329)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
at weblogic.management.mbeans.custom.WebServer.addWebDeployment(WebServer.java:76)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy32.addWebDeployment(Unknown Source)
at weblogic.management.configuration.WebServerMBean_CachingStub.addWebDeployment(WebServerMBean_CachingStub.java:1121)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:315)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:491)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:361)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:984)
at weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:971)
at weblogic.management.internal.DynamicMBeanImpl.add(DynamicMBeanImpl.java:956)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:648)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy98.addTarget(Unknown Source)
at weblogic.management.mbeans.custom.ApplicationManager.autoDeploy(ApplicationManager.java:867)
at weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:966)
at weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:886)
at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:802)
at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:733)
at weblogic.management.mbeans.custom.ApplicationManager.update(ApplicationManager.java:206)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy5.update(Unknown Source)
at weblogic.management.console.webapp._domain.__upload_app._jspService(__upload_app.java:149)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:241)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
at weblogic.management.console.actions.ForwardAction.perform(ForwardAction.java:35)
at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:171)
at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
####<Feb 22, 2002 10:32:36 AM EST> <Error> <J2EE> <mdunbar> <myserver>
<ExecuteThread:
'1' for queue: '__weblogic_admin_html_queue'> <system> <> <160001> <Error
deploying
application ipp: Could not load ipp>
####<Feb 22, 2002 10:32:36 AM EST> <Error> <Management> <mdunbar> <myserver>
<ExecuteThread:
'1' for queue: '__weblogic_admin_html_queue'> <system> <> <141042> <Error
deploying
application .\config\mydomain\applications\ipp.war: java.lang.reflect.UndeclaredThrowableException> -
Package load Failed! Invalid package Title, manifest file cannot be found
Greetings. I am new to UPK and am seeking guidance on an upgrade to 11.1.
A little background on what we are trying to do:
We have two machines:
Windows 2003 machine in domain 'X' | UPK 11.0.0.1.
Windows 2008 R2 virtual machine in domain 'Y' | UPK 11.0 on the new machine first, install the 11.0.0.1 patch, and then upgrade to 11.1.
We are using the same database as the old machine. Developer Server is Standard Authentication, Knowledge Center is Windows authentication.
==========================================================================================
So far we have installed 11.1 with the respective database upgrades, but are lost as to how to migrate the old Content Root data. We have copied all the content to the new Content Root, added it to IIS like the old machine, and verified that the UPK database Content Root path is correct and working.
For the rest of the post, I am remoted into the server from my local workstation, and then using IE to access KCenter on the server's FQDN, not via localhost.
Since I am green, so I presumed that I would need to import the titles under Manager in KCenter. I zipped each content folder individually (they are named "1", "9", etc), and then attempted to import each zip file.
NOTE: At this stage sometimes we are prompted to authenticate again. When it does, sometimes the credentials that we know work, get rejected and we are prompted again. This will repeat until we get a 401 and we have to start over. We have verified that the Windows account currently in session with the site is valid and has administrator authority within KC.
NOTE2: On the first few tries, .NET complained that maxRequestLength was not large enough. I had our servers team increase it on the actual server in order for us to proceed.
Provided we don't have to authenticate again, or that it actually accepts our credentials, we get to the 30% mark and then receive the error: *"Package load Failed! Invalid package Title, manifest file cannot be found"*
Does anyone have any wisdom for this process? The title importation section in the deployment manual is not helping, and the administrator from whom I am taking over this software has not had to deal with this before.
Thank you,
Ian
Edited by: 986290 on Feb 5, 2013 10:21 AMHi Marc, thanks for the post,
I have gone through an extensive troubleshooting process with Oracle, including their development team, in order to fully complete our project setup. As a supplemental bit of information, we also were having connection errors when attempting to publish directly to the knowledge center.
As far as the context of this post, here is the solution in brief:
1) Verify that the package being imported was published from the same version of the Developer Client as the Knowledge Center installation's.
2) Check for database consistency issues. In our case we were using a database that was built in another domain. After numerous attempts with Oracle support on the line to determine the inconsistency, it was decided to completely reinstall and build a new database from scratch in the new domain.
3) Check application pool identities and access (while we had some inconsistencies here, correcting them did not change the behavior of the import/publish errors)
In review, a lot of what we had setup was correct. Our primary point of failure, we feel, was using the old database. Technically this should not have been a problem, but Murphy likes to get his way sometimes.
Cheers,
Ian -
Need help with a manifest file
I'm trying to make a jar file executable, and I've seen numerous questions and answers regarding this particular issue, and none of them helped me with my problem.
I have a batch file that runs the application without any problem, but when I try to create a manifest with the main class attribute copied char by char from my batch file and run it, I get a message "could not find the main class".
I been browsing the web for the past 4 hours* now and the only type of answers I see for that problem is something like this:
...Main-Class... "${main.class}".
This type of solution is worthless to me, since it doesn't tell me why my path is correct when I use the .bat file and incorrect when used in a .jar file.
Thanks,
Omer.I read there the related topics.
However, it wasn't even close to being helpful.
I'm using ant and the inner build.xml syntax is probably eluding me somewhere.
In fact, if it was possible to find an example build file that was written for ant 1.6 or later and contains the Main-Class attribute (I've seen some examples that contain an example file, but none of them contained the Main-Class attribute, and I found some Main-Class examples but none of them showed where they should go or how they should appear within the manifest file.
I'm at the point when I'm about to give up the whole idea and provide the unprofessionally looking .bat file.
I thank anyone who has put his mind to this issue, but if there is no build.xml example, I guess you can't help me.
Thanks anyway.
It's frustrating to see how the most flexible language there is to work with when coding, becomes next to impossible to work with when you need to deploy it.
Update, 30.04.2008:
I have managed to figure out that the problem wasn't with the main class, but with the classpath.
I run the program from Intellij, and everything works perfectly. I use a batch file, and perfect. I try to use an Ant generated jar with the classpath attribute set exactly like the batch file's paths, and nothing.
There is no error message either.
The classpath is located under "/lib/*.jar" in the distribution directory, where the "program.jar" is located.
I have come to the point that i would pay to see a proper working build.xml and to see the relative and absolute paths of the classpath.
This is actually harder than developing an extremely rich server application.
Edited by: omerk76 on Apr 30, 2008 11:04 AM -
Powershell: How do I upload files with metadata from a manifest file?
I am using the script from this blog to try to upload files into SharePoint, using a manifest file to specify the metadata associated with each file. Right now, the script works, but is not populating
the metadata from the manifest (xml) file. When I write the $metadataManifest variable out to the console, I get the contents of my xml file, so the code is reading the file when it should. However when it gets to the line in bold ($metadataManifest.Columns.Column),
it does not go into that block...it just skips on to checkin the file. Again the $metadataManifest variable shows all the content in my xml manifest file. Here is what the script looks like...
#Get web and document library objects
$web = Get-SPWeb "http://companySite"
$Library = "My Library"
$docLibrary = $web.Lists[$Library]
$ManifestFilePath = "C:\PowerShellScripts\Manifest.xml"
$LocalPath = "C:\Upload\Test Upload\My Upload Directory\"
if ($ManifestFilePath)
$metadataManifest = (Get-Content ($ManifestFilePath))
write-host "Manifest file: " $metadataManifest
else
write-host "Manifest file not specified for categorising uploaded documents"
#Check for the LibraryStartFolder parameter to specify a root folder
if ($PSBoundParameters.ContainsKey('LibraryStartFolder')) {
$folder = $web.GetFolder($docLibrary.Title + $LibraryStartFolder)
else
$folder = $docLibrary.RootFolder
#Attach to local folder and enumerate through all files
if($IncludeSubFolders) {
$files = Get-ChildItem $LocalPath -Recurse
else
$files = Get-ChildItem $LocalPath
$files | ForEach-Object {
#Check if the object is a folder - if so, create it in doc library
if ($_.PSIsContainer) {
if (($IncludeSubFolders) -and (!$FlattenStructure)) {
#Generate folder path for creation in SharePoint
#by looking at the parent folder on the local path
$spFolderPath = ($_.Parent.FullName.Replace($LocalPath,"")).Replace("\","/")
#Get the folder into which the new folder will be created
#by adding the folder path generated above, if one existed
if ($spFolderPath -eq "") {
$currentFolder = $web.GetFolder($folder.Url)
else
$currentFolder = $web.GetFolder($folder.Url + $spFolderPath)
#Check to see if subfolder already exists
#and create it if not
$testFolder = $currentFolder.SubFolders[$_.Name]
if ($testFolder -eq $null) {
write-host "`nAdding folder" $_.Name "to" $docLibrary.Title "in" $web.Title "..." -foregroundcolor Green
$newFolder = $currentFolder.SubFolders.Add($_.Name)
else
write-host "`nFolder" $_.Name "already exists in" $docLibrary.Title "and shall not be created" -foregroundcolor Red
else
#Generate file path for upload into SharePoint
if ($FlattenStructure) {
$spFilePath = ("/" + $_.Name)
else
$spFilePath = ($_.FullName.Replace($LocalPath,"")).Replace("\","/")
$spFullPath = $folder.Url + "/" + $spFilePath
#Check if the file exists and the overwrite option is selected before adding the file
if ((!$web.GetFile($spFullPath).Exists) -or ($Overwrite)) {
#Add file
write-host "`nCopying" $_.Name "to" $spFullPath.Replace("/" + $_.Name,"") "in" $web.Title "..." -foregroundcolor Green
$spFile = $folder.Files.Add($spFullPath, $_.OpenRead(), $true)
#$spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stream]$fileStream, $true)
$spItem = $spFile.Item
#Walk through manifest XML file and configure column values on the file
$metadataManifest.Columns.Column | ForEach-Object {
#Single value text columns
try
if (($_.Type -eq "Text") -or
($_.Type -eq "Choice") -or
($_.Type -eq "Boolean") -or
($_.Type -eq "Number") -or
($_.Type -eq "Currency")) {
$columnName = $_.Name
write-host "Setting value on column"$columnName "..." -foregroundcolor Blue
$_.Values.Value | ForEach-Object {
$spItem[$columnName] = $_
write-host "Value set to"$_
catch {}
#Multiple line text column
try
catch {}
#Multiple choice columns
try
catch {}
#Hyperlink columns
try
catch {}
#Single User column
try
catch {}
#Multiple User column
try
catch {}
#Single value Managed Metadata column
try
catch {}
#Multi value Managed Metadata column
try
catch {}
#Update document with new column values
$spItem.SystemUpdate($false)
#Check in file to document library (if required)
#MinorCheckIn=0, MajorCheckIn=1, OverwriteCheckIn=2
if ($CheckIn) {
if ($spFile.CheckOutStatus -ne "None") {
$spFile.CheckIn("File copied from " + $filePath, 1)
write-host $spfile.Name"checked in"
#Approve file (if required)
if ($Approve) {
if ($spItem.ListItems.List.EnableModeration -eq $true) {
$spFile.Approve("File automatically approved after copying from " + $filePath)
if ($spItem["Approval Status"] -eq 0) { write-host $spfile.Name"approved" }
else
write-host "`nFile"$_.Name "already exists in" $spFullPath.Replace("/" + $_.Name,"") "and shall not be uploaded" -foregroundcolor Red
$web.Dispose()
And here is what the manifest file looks like...
<?xml version="1.0" encoding="utf-8"?>
<Columns>
<Column Name="Column1" Type="Text">
<Values>
<Value>First File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Column1" Type="Text">
<Values>
<Value>Second File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>9876</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data2</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More more Data</Value>
</Values>
</Column>
</Columns>
I can't figure out what am doing wrong...why my script is not iterating through the manifest file to upload the document along with the metadata. I would really appreciate any help. ThanksHi Spawn,
Name should not be a problem.. I will probably post you the entire code (I modified it to meet your goals for having multiple column xml nodes as well)
For the code snippet below:
a. In powershell all my changes will have ## prefixed comments
b. in XML I have changed one column name to "Name" to replicate your case and also added a parent node for making the xml well formed.
and the SharePoint output
Please see the code below
$web = Get-SPWeb "http://intranet/sites/test"
$Library = "My Library"
$docLibrary = $web.Lists[$Library]
$ManifestFilePath = "D:\Manifest.xml"
$LocalPath = "D:\UploadPath\"
if ($ManifestFilePath)
##read the xml file as an xml object
[xml]$metadataManifest = (Get-Content ($ManifestFilePath))
write-host "Manifest file: " $metadataManifest
else
write-host "Manifest file not specified for categorising uploaded documents"
#Check for the LibraryStartFolder parameter to specify a root folder
if ($PSBoundParameters.ContainsKey('LibraryStartFolder')) {
$folder = $web.GetFolder($docLibrary.Title + $LibraryStartFolder)
else
$folder = $docLibrary.RootFolder
#Attach to local folder and enumerate through all files
if($IncludeSubFolders) {
$files = Get-ChildItem $LocalPath -Recurse
else
$files = Get-ChildItem $LocalPath
$counter=0
$files | ForEach-Object {
#Check if the object is a folder - if so, create it in doc library
if ($_.PSIsContainer) {
if (($IncludeSubFolders) -and (!$FlattenStructure)) {
#Generate folder path for creation in SharePoint
#by looking at the parent folder on the local path
$spFolderPath = ($_.Parent.FullName.Replace($LocalPath,"")).Replace("\","/")
#Get the folder into which the new folder will be created
#by adding the folder path generated above, if one existed
if ($spFolderPath -eq "") {
$currentFolder = $web.GetFolder($folder.Url)
else
$currentFolder = $web.GetFolder($folder.Url + $spFolderPath)
#Check to see if subfolder already exists
#and create it if not
$testFolder = $currentFolder.SubFolders[$_.Name]
if ($testFolder -eq $null) {
write-host "`nAdding folder" $_.Name "to" $docLibrary.Title "in" $web.Title "..." -foregroundcolor Green
$newFolder = $currentFolder.SubFolders.Add($_.Name)
else
write-host "`nFolder" $_.Name "already exists in" $docLibrary.Title "and shall not be created" -foregroundcolor Red
else
#Generate file path for upload into SharePoint
if ($FlattenStructure) {
$spFilePath = ("/" + $_.Name)
else
$spFilePath = ($_.FullName.Replace($LocalPath,"")).Replace("\","/")
$spFullPath = $folder.Url + "/" + $spFilePath
#Check if the file exists and the overwrite option is selected before adding the file
if ((!$web.GetFile($spFullPath).Exists) -or ($Overwrite)) {
#Add file
write-host "`nCopying" $_.Name "to" $spFullPath.Replace("/" + $_.Name,"") "in" $web.Title "..." -foregroundcolor Green
$spFile = $folder.Files.Add($spFullPath, $_.OpenRead(), $true)
#$spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stream]$fileStream, $true)
$spItem = $spFile.Item
## ensure we pick the corresponding node in the columns xml (first file, first xml node, second file - second node likewise)
#Walk through manifest XML file and configure column values on the file
$metadataManifest.FileData.Columns[$counter].Column | ForEach-Object {
#Single value text columns
try
if (($_.Type -eq "Text") -or
($_.Type -eq "Choice") -or
($_.Type -eq "Boolean") -or
($_.Type -eq "Number") -or
($_.Type -eq "Currency")) {
$columnName = $_.Name
write-host "Setting value on column"$columnName "..." -foregroundcolor Blue
$_.Values.Value | ForEach-Object {
$spItem[$columnName] = $_
write-host "Value set to"$_
catch {}
#Multiple line text column
try
catch {}
#Multiple choice columns
try
catch {}
#Hyperlink columns
try
catch {}
#Single User column
try
catch {}
#Multiple User column
try
catch {}
#Single value Managed Metadata column
try
catch {}
#Multi value Managed Metadata column
try
catch {}
#Update document with new column values
$spItem.SystemUpdate($false)
##increment the counter to read the next xml node
$counter++
#Check in file to document library (if required)
#MinorCheckIn=0, MajorCheckIn=1, OverwriteCheckIn=2
if ($CheckIn) {
if ($spFile.CheckOutStatus -ne "None") {
$spFile.CheckIn("File copied from " + $filePath, 1)
write-host $spfile.Name"checked in"
#Approve file (if required)
if ($Approve) {
if ($spItem.ListItems.List.EnableModeration -eq $true) {
$spFile.Approve("File automatically approved after copying from " + $filePath)
if ($spItem["Approval Status"] -eq 0) { write-host $spfile.Name"approved" }
else
write-host "`nFile"$_.Name "already exists in" $spFullPath.Replace("/" + $_.Name,"") "and shall not be uploaded" -foregroundcolor Red
$web.Dispose()
and the xml file
<?xml version="1.0" encoding="utf-8"?>
<FileData>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>First File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>Second File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>Third File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>Fourth File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>Fifth File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
</FileData>
Thanks and Regards,
Partha
AvePoint -
How to put chinese character in the Manifest file
Hi,
I want to know that how can we put chinese characters in the manifest file. Please suggest a solution.
Regards[slightly confused stuff removed]Sorry, AmitChalwade123456, I know trolling can be very funny, but you're confusing the sh*t out of newbies with this almost-seems-usefull kind of talk.
Stop that.
And in case you really meant that seriously: Please refrain from giving advice with regard to encoding. What you posted is wrong (to put it mildly). -
Help using manifest file classpath.
I have a jar file (A) that is dependant on another jar file (B). When I run my app, which references jar A, if it doesn't also include jar B in its class path I get an error referencing jar B (as expected)
Exception in thread "AWT-EventQueue-0" java.lang.NoClassDefFoundError: org/apache/commons/io/FileUtils
But if I add the following to jar A's manifest file:
Class-Path: E:\commons-io-1.1.jar
if get an error referencing jar A
java.lang.NoClassDefFoundError: utilities/gui/ExitApplicationProducerOk, now I have "Class-Path: .\commons-io-1.1.jar"...That's still Windows-specific. If you want it to be relative to the referring jar, then simply specify commons-io-1.1.jar without the windows-specific path notation prefixing it.
-
Using Manifest File in PowerBuilder 5
Hi,
We are working in an old project which was developed in PowerBuilder 5.0,
We followed the below steps to get the list of DLL and OCX getting register with our Application
1. Searched in application installation path.
2. Searched in source code.
Is there any other way to get the list of components and reference list?
We need the above list to create manifest file.
We have another big challenge that whether Manifest file is work with PB5 or not? If yes,how to make PB5 app to communicate with manifest?
Please help...
Thanks,
SundarRoland,
Please help me to find third party DLL and mention the DLLs to be register.
I hope that the below dlls are related to PowerBuilder 5.0 and need not to register
Pbbgr050.dll, Pbdbt050.dll, Pbdwe050.dll, Pbodb050.dll, Pbroi050.dll, Pbrtc050.dll, Pbrte050.dll, Pbrtf050.dll, Pbshr050.dll, Pbtyp050.dll
I have doubt on following DLLs and ocx
msvcrt.dll, MSVCRT40.dll, OLEPRO32.dll, Pfccom32.dll, CTDATE32.ocx
Please confirm above 4 DLLs and 1 OCX are need to register?
Thanks,
Sundar
Maybe you are looking for
-
How do i get rid of cover flow in music on my 4s
how do you get rid of cover flow off on the 4s and go back to play list
-
How to display time duration (NOT dates) with an input mask in a JTable?
Background: I am trying to display in a JTable, in two columns, the start position and time duration of an audio clip. They are stored as type float internally eg. startPosition = 72.7 seconds. However I wish to display on screen in the table in HH:m
-
Acrobat Pro XI Not installing.
I am running Windows 7 64Bit and I downloaded Acrobat Pro XI three times through the Acrobat Assistant and every time I get the following message. This version of the file is not compatible with the version of windows you are running. Request you to
-
I downloaded the latest version of Firefox to install on my Mac (OS 10.5.8). When I tried to install it gave me a message saying I had "insufficient privileges". I am using the Admin account. What should I do?
-
This apple ID cannot be used for MobileMe Sign in with a different Apple ID
When I try and use my Apple ID to setup the free find my account on MobileMe I get this error after I hit the OK on the pop that reads Terms of service have changed. "This apple id cannot be used for MobileMe. Sign in with a differant Apple ID" I can