SCORM 2004 version required by Multi Sco Packager 6?

Does anyone know which version of SCORM 2004 is required by the Multi Sco Packager? I have a SCORM .ZIP file packaged for 2004 v2.3 and the MSP is telling me that the SCORM version is "incompatible." Thanks! Laura

Hi there,
Welcome to Adobe Community.
If you are getting that error then try changing the Scorm 2004 version to 3rd edition under the manifest.
Thanks!

Similar Messages

Multi-SCO Packager does'nt works with scorm 2004 (captivate 7) ?

Hi everybody,
I recently published a mutli scorm using Captivate 7 and multi scorm packager.
Eveyrthing works great when I publish each content to scorm 1.2 and use multi scorm packager after. It works fine in my LMS (moodle or Dokeos).
But when I publish each content to scorm 2004 and after use multi scorm packager, my course doesn't work in my LMS. A new window is open but nothing is displayed.
Anyone has the same issue with mutli scorm packager from captivate 7 and scorm 2004 ?
Best regards.

Hi,
I just tested the same workflow as you mentioned, i created a new project in version 7, set reporting fro SCORM 2004 and published using multisco packager and uploaded it to an LMS (http://cloud.scorm.com)
I was able to launch and go through the course successfully which makes me curious about the nature of your course.
could you please tell us, if this was built in a previous version of Captivate?
can you upload the same package to scorm cloud and verify the results.
Caan you check the Edition of you settings which is 3rds by default. (Quiz-- Quiz Preferences-- Scorm 2004--Manifest), republish and then upload again.
Good Luck.
Anjaneai

Multi-Sco Package Freezes at End of First SCO

Greetings!
I have created a simple 3-SCO 2004-manifest Multi-SCO package for upload to our LMS.
SCO1 - Pre-Test
SCO2 - Video
SCO3 - Post-Test
My problem is that no matter what I try, the playback freezes at the end of the first SCO and will not proceed to the second one.
Our LMS is Interactyx (which I gather is loosely based on Moodle).
On a lark, I also created a 1.2 manifest version, and it too failed to proceed from one SCO to the next.
In the "At End" options, I have tried forcing it to call the next SCO directly (link and by file name), and I have tried the "Stop" option, and I have tried the "Close" option and I have tried the "Continue" option.
Uploaded separately, each SCO works perfectly - I only have trouble w/ it going from one SCO to the next. I've called Adobe tech support and they've watched it do this via screen sharing and are working on it - but I hoped someone here might have a quick solution.
Does anyone have any tips/tricks/technomagic that will fix this for us?

I am having this exact problem with my MultiSCO. We have several modules set to close after playing. All of the SCOs open one after another perfectly, except that first one. The designer programmed a button on the last slide to open up the next movie in the sequence and it worked. Not as nicely as the other SCOs, but it did work. I know this is way to late to help you, but maybe it will help the next person!
Kelly
@KellyPhillipsNC
www.effectivetrainingdesign.com
www.redfeathernetworking.com

Can the multi-sco packager be used to package Muse projects for LMS?

We are currently experimenting with Muse, and we are interested in the posibility of using Muse to develop eLearning courses. Is there any way that Muse projects can be packaged into a zip file that can be loaded into an LMS? Perhaphs using Captivate's multi-sco packager?

Captivate's Multi-SCORM Packager is purely for Captivate content and it usually has to be created by a specific version of Captivate to be compatible with a specific version of the packager app. So, the answer is most likely to be no.

Multi-SCO Packager Lesson Hierarchy

I am creating a course using the Multi-SCO Packager. When I test my course in Scorm Cloud, the Scorm player designates my first Lesson as the 'parent' lesson and all the other lessons it's 'children'. How do I remove this indentation so all lessons are on the same level?

I tested using both the Multiple SCO template in 1.2 and 2004. I also tested using the Simple Remediation which produced the same 'indented' result. I just tested the course again after shortening the title of the initial lesson and that seemed to resolve the issue, However I would like to resolve this without changing the title length if possible. Any other ideas? Thanks!

Multi-SCO Packager is not included in Adobe Captivate 6?

I justed downloaded Adobe Captivate 6, and installed it as a trial. I didn't find the Multi-SCO Packager. So it was still not included in Adobe Captivate 6?

Passing no judgement on whether this alignment was a good idea or not...do then consider the eLearning Suite for your next upgrade if the packager is indeed important. HOWEVER, be sure it is - it's a nice tool for easing the upload of many lessons into the LMS...but it does NOT automate Sequencing, which is the somewhat automatic transition between lessons based, as far as I know. It's simply a tool for bundling several separate SCORM packages into one .zip. For instance, in our LMS, uploading a SCORM package made with the Multi-SCO Packager saves time, but results in several separate lessons that have to be individually launched from the LMS anyway...
So you may not be missing out on much
NOW, having the Aggregator suppor Sequencing, THAT would be cool!

Captivate - Multi SCO Packager does not open

eLearning 6.1 was installed on several machines, but neither one could get SCORM to work. From Start > All Programs > Adobe eLearning Suite 6.1 > Multi SCO Packager, it opened a gray empty window. Same problem if I opened from Captivate File > New Porject > Multi SCO Packager. I installed Captivate 6 and Captivate 7 on different machines, I still got the same issue. eLearning6.1/Captivate had the latest updates as well as Windows 7 64-bit SP1.
How to fix this? Please help.

Thanks RodWard, here is a screenshot. The Adobe menu shows the content, but the New Course and Publish Course are inactive.

Difference between Aggregator Project / Multi SCo packager / multi captivate projects with links...

Now I have to admit I am a little lost between the possibilities of captivate 8...
What differences exactly between these developements:
Aggregator project?
Multi sco packager?
or create a single file with mutliple Captivate projects all linked through the Action : "open the project or URL"....?
If I need only a single SCO on one unique completed course, should I use the project aggregator ?
but would the projects sizes be a problem? and explain why to use the Action : "link to project"..rather than the aggregator?
basically I wish one single file with all the courses accessible from one screen / (project?)
reports only on the course followed, resume on the course, back to the course Menu language selection .....
thanks for any help....the more i read the more i am lost... ;(

Thank you for this details.
It seems then that none of this two, aggregator or packager, can be 'twisted' to be used in the Menu selection I need.
Aggregator project?
A way to link several Captivate output files through a common menu created by the aggregator.
>Does using the aggregator mean there are still several / each output files to be uploaded in the LMS separately?
Are you publishing to swf only?
>I publish for the LMS plateform, swf, html, but also for IPads! Would it make a difference?
"You could also have your manifest point to a language selection page which would then launch the applicable Captivate files."
>Is there a good video tutorial that would show how to link and publish captivate projects together? I have created a Cp menu page with buttons that would link to each cp (language) files but I am not sure I do it properly...
I need to be sure what to enter in the Actions/Link to file or link to URL field...and to follow the right step to publish and copy paste the files in the same (callees...) folder...
Many thanks for your help!

Javascript for custom Exit button on Saba LMS with SCORM 2004 v3 requirements.

What should I add to the javascript panel on a custom exit button in Captivate to properly exit a course uploaded to a Saba LMS with SCORM 2004 requirements?

I can confirm that the approach recommended by georgeyp worked for me with Captivate 5.5 and Saba. After publishing in Captivate, I opened the SCORM zip package and edited the imsmanifest to remove the masteryscore line. It seems that the LMS has nothing to compare to the 0 score value passed by Captivate and so it does not move the incomplete course to the Transcript and mark it ‘Unsuccessful’.
I did not have an issue with the course getting stuck on the first screen and just showing the LMS initialization text.
Note that I also tried the additional code (suggested but not guaranteed by Saba) and it did not solve the problem. I also tried using the 'SendTrackingDataAtEnd' SCORM template available in Captivate under Preferences > Quiz > Reporting. It did not solve the problem either.

How do I create a final congratulations page with multi sco packager?

Using multi scorm packager with a bunch of projects. Most of them have their own quizzes. When I complete each module, they get reported as complete to the LMS.
I'm using SCORM cloud to test, and I want it so that when every thing has been completed, the user sees or has access to a final page which basically says congratulations and shows a certificate of completion or something.
As it stands it's not obvious when a user has passed the course.
Thanks,
Ryan

That's not tracked in Captivate, only in the LMS. So you'd need to develop custom coding that interrogates the LMS to get the aggregated scoring information. Captivate isn't designed to do that.
As for the sequencing rules, that's also not something you can do within Captivate or the Multi-SCORM Packager tool. However, if you Google for information about SCORM sequencing rules there's plenty of information about the way to write them into the imsmanifest.xml file manually.

Captivate 8 install hangs at 16%. Tried on multiple enterprise laptops, using windows 7 64Bit. Cannot install Adobe Multi SCO Packager. Any thoughts?

I am trying to install Captivate 8 on our Enterprise laptops. The install will not move pasts 16% and I have tried the install on several laptops. Image is windows 7 64bit. Any suggestions would greatly be appreciated.

Hi @prdstudio3 ,
Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

Packaging Multi-SCO Captivate Projects - query

Hi
We are considering upgrading to the eLearning Suite so that we can use the Multi-SCO Packager. For the timebeing I am tried using a free software called Relead Editor. With this, when a learner clicks out of the course early, the next file automatically opens. I don't know if I'm doing something wrong or if the software just isn't seeing the multi-SCOs as one course.
If anyone has used this eLearning Suite Extension, then I would really like to hear from you. Any advice to resolve this issue would be greatly appreciated.
Thanks

Captivate 6 now uses Rustici SCORM drivers and the output is much superior to all previous versions of Cp with regard to LMS integration. Are you manually editing the files in order to create multi-SCORM packages? If so, am I correct in assuming that you bought Cp as a standalone app and do not have the Adobe E-learning Suite with the Multi-SCORM Packager tool?

Can anyone verify which version of SCORM 2004 Captivate 4 supports?

Captivate 4 in supporting SCORM 2004 writes 1.3 out to the manifest.
Obviously it supports SCORM 2004 version 1, but can anyone verify whether it does support either version 2 or version 3 of 2004?
We're trying to make sure our LMS is up to the latest specs. Version 4 just came out in March 2009, so we don't expect any products to support that yet, but we at least want to be able to support the latest Version up to that being used.

Cp4 should be able to ouput SCORM 2004 content that plays in an LMS that supports any of the 4 editions.
This does NOT mean that Cp4 has all the new changes already built into it.
But it does mean that Cp4 still handles the basics that are core to each version without attempting the latest extras.
The latter editions of scorm 1.3 (aka scorm 2004), added to and clarified aspects of the spec (e.g. sequencing and navigation control between sco's, global variables that can be shared between sco's, etc.), but Cp does not do any of that anyway.
There is one big thing that I did come across though that I want to mention.
Early on, they changed the name from scorm 1.3 to scorm 2004.
As a result, you can have equivalent courses, whose only difference is that the manifest file refers to the spec by a different name.
Many LMS vendors have accounted for this and it should not make a difference.
However, I had a case where the version of the LMS being used was released when it was still called scorm 1.3.
My courses (which were scorm 2004, 2nd and 3rd edition) initially would fail the basic package validation when uploading because it was looking for "1.3" in the imsmanifest file.
Changed the line in the manifest to reflect the old name, and suddenly everything was fine again.
In my case, to verify I ran the package through each iteration of the ADL Conformance Test Suite for scorm 2004 (just adjusting name of the referenced schema) and it ran through without a hitch.
Hope this has helped.
Russ

Still struggling with Captivate 6, Oracle LMS and SCORM 2004

Still can't get this course tracking with scores. Herewith the screen shot. Does anyone know if the settings I have chosen for the quiz are correct. When I load the published course into the lms and test it, it shows "not attempted" prior to opening it and it gives the final score on the last quiz slide. There is a slide after the last quiz slide. It still seems not to transfer the scores to the lms. I recently found out that we have Scorm 2004 version 4, so I changed the configuration setting as it was defaulted to version 3, but that still hasn't helped with the scores. Under the start and end settings, I have chosen close project for the end. I have been through a week of torture with this course! Please can anyone assist as I'm not sure what to do anymore!

Oh no. Now I'm panicking! I will try it. Thanks
Mrs T Cassisa
Oracle Learning Management Practitioner
Tel: 27 (21) 403 3069
Fax: 27 (21) 403 3333
www.parliament.gov.za
>>> RodWard <[email protected]> 2/26/2014 11:20 AM >>>
Re: Still struggling with Captivate 6, Oracle LMS and SCORM 2004
created by RodWard in Quizzing/LMS - View the full discussion
This sounds like you have some major issue in this course project file.
Breaking it up into smaller files might not fix your issue.
I suggest you create a new blank CPTX project file, add one true/false quiz question, set it to report to LMS with the settings you have above, publish as a single SCO package zip file, and upload to both your LMS and SCORM cloud.
If this file doesn't even work, your installation of Captivate would have to be suspect and nothing you do in course module is going to fix that until you work out what the problem is. If this very simple single-SCO lesson plays OK and reports successfully to the LMS, then we need to figure out what is lacking in your current file.
It could be that your current file has somehow become corrupted. See the suggestions here for how to debug general corruption issues:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic- troubleshooting-techniques
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6158090#6158090
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6158090#6158090
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6158090#6158090. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Quizzing/LMS at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Captivate 7 Scorm 2004 and some Errors

I've exported 2 captivate scorm files and used the Adobe Multi Sco Packager to create one course.
When we upload the packaged scorm file to the LMS we keep getting the following errors in the debug window:
Can someone point me where I can start to look on how to fix this issue?
55: GetValue("cmi.launch_data")
56: GetErrorString("403")
57: return "Data Model Element Value Not Initialized"
58: 403 Data Model Element Value Not Initialized
59: GetLastError()
60: return "403"
61: GetLastError()
62: return "403"
63: GetErrorString("403")
64: return "Data Model Element Value Not Initialized
----- and also the following:
83: SetValue("cmi.score.scaled","NaN")
84: GetErrorString("406")
85: return "Data Model Element Type Mismatch"
86: 406 Data Model Element Type Mismatch
87: Invalid data format for Real: NaN
88: GetLastError()
89: return "406"
90: GetErrorString("406")
91: return "Data Model Element Type Mismatch"

It should if you enable Interaction Data (default).

SCORM 2004 version required by Multi Sco Packager 6?

Similar Messages

Maybe you are looking for