SCORM-Based Presenter content does not track in LMS when using IE9 or above

MS has changed IE browser behavior to restrict SCORM communication between course content and an LMS when content is launched using IE 9, 10, or 11. This is not specific to a particular LMS. The problem occurs with Presenter 7 and 8 content. It occurs with Articluate content. It's about a security fix that was implemented with "unintended consequences". The work around has been to force users with IE9 or 10 to run in compatiblilty mode. This may work in a corporate setting with a small # of users but a long term solution needs to found. Articulate has developed a patch for new content and an "updater" that wil fix existing content.
I do not see any mention of this problem on the Presenter site. What is Adobe doing to fix this? There has to be a way to update existing content automatically as we can not afford to republish all our content.
I need help with this issue.

Hi Bernhard,
nice to hear that we resolve the problem
> Karstens answer solved my base problem,
> Detlevs answer lead into the right direction.
Not that I've that need for points...
It's just the question why my answer (if you follow the link, my answer was: delete two lines, from which one is essential to be deleted) only "lead into the right direction"... In fact, it solved the base problem, I would claim for me
To give the technical background: If your write
<property name="ComponentType" value="jspnative"/>
the portal runtime expects a component consisting of a native JSP; the second directive -
<property name="JSP" value="pagelet/InitialPage.jsp"/>
- for this case tells where to find this JSP. So if you delete the first line, <i>at least</i> the second line has no sense anymore. To clean up such a portalapp.xml, it just makes sense also to delete the second line.
Best regards
Detlev

Similar Messages

Captivate 7 course does not track or bookmark when using Fire Fox browser. Can anyone help me???

We recently switched from using EI to Fire Fox. When we switched my Captivate 7 course is now not bookmarking or tracking in the LMS. Prior to the switch the course was working fine. Bookmarking and tracking as it should.

I only have Windows 7 handy to test...
I installed the bookmarklet from here: http://www.refworks.com/refworks/bookmarklet.asp
On a non-secure (HTTP) page, it worked as designed and populated a page with reference info. When I clicked import it took me to another page, I guess a login is needed to do that.
On a secure (HTTPS) page, it opened only a blank tab and triggered a mixed active content block in the secure page. To work around that, I edited the bookmarklet to this code:
<pre><nowiki>javascript:var%20wRWMain1=window.open('','RefWorksBookmark');d=document;i='AddToRWScript';if(d.getElementById(i))RWAddToRW1();else{s=d.createElement('script');s.type='text/javascript';s.src='//www.refworks''.''com/refworks/include/addtorw.asp';s.id=i;d.getElementsByTagName('head')[0].appendChild(s);}void(0);</nowiki></pre>
(The change is removing the http: from src='http://...' so the script will be retrieved using whatever protocol the site is using.)
Then I reloaded the secure page and tried again. This time Firefox warned me the data was submitting to an insecure page, I OK'd that, and got the expected Web Page Info on refworks.com.
Can you get that far?
''Sorry, the bookmarklet is messed up because of the wiki syntax. I will re-post.''

Msi x99 gaming 9 ack does not detect capture card when using with xsplit

msi x99 gaming 9 ack does not detect capture card when using with xsplit
i install every but still it does not work.

Hi
It wasn't hard to find your motherboard version:
http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
Since your BIOS is v20.1, it couldn't be G3
Apart from checking BIOS, you can only check motherboard or moth...

Completion not recorded in LMS when using IE 11

Has anyone else had problems with course completion not recording in the LMS when using IE 11?

Yes, we are experiencing the same issue. It appears that the course is trying to re-initialize upon termination...
We may have to force using Compatibility mode which can be driven from a meta tag in the index page header...
<meta http-equiv="X-UA-Compatible" content="IE=EmulateIE11" />
Anyone tried this?

IPhone 6 does not show in iTunes when using WiFi

My iPhone 6+ shows up in iTunes when connected via USB. But if I disconnect the cable and turn off iTunes and then come back later it does not show up like my iPhone 5 did using OS 7.
I have the option selected in iTunes to "automatically connect using WiFi".
I have tried turning off my phone and restarting iTunes but it does not help.
Any suggestions?

Greetings Paul,
It sounds as though you are attempting to sync with iTunes via WiFi, and are running into some complications. After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iTunes WiFi sync:
Sync using Wi-Fi
Open iTunes
To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable.
Click the Device button in the upper-right corner. (If viewing the iTunes Store, click the Library button first.) If you don't see your device, choose View > Hide Sidebar.
In the Summary tab, select "Sync with this [device] over Wi-Fi."
When the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it. The iOS device will sync automatically when the following conditions are true:
The iOS device is charging.
iTunes is open on the computer.
The iOS device and the computer are on the same Wi-Fi network.
While the iOS device is in the left-hand column of iTunes, you can select the content tabs and configure sync options.
Click Apply or Sync to sync the iOS device.
If the iOS device doesn't appear in the Devices section or you can't sync, please try these steps.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Oci_close does not release the connection when using DRCP

Hello everyone,
we are currently testing the deplyment of DRCP with 11g. I have the whole thing setup (correctly to my best knowledge), but I am facing an issue. The call to oci_close does not seem to release the connection to the pool as I would expect and therefore we see similar behavior like we were getting without using the DRCP.
Our setup is using two RAC instances running 11.1.0.6.0, I am using PHP 5.1.6 with PECL installed oci8 1.3.4. The DRCP pool is configured and started, each with 100 max servers.
When the webserver is idle it looks, well, idle.
SQL> SELECT INST_ID,NUM_BUSY_SERVERS FROM GV$CPOOL_STATS;
INST_ID NUM_BUSY_SERVERS
1 0
2 0
The script is as simple as it gets:
<?php
$c = oci_pconnect('scott','tiger','IWPPOOLED');
$s = oci_parse($c, 'select * from emp');
$r = oci_execute($s, OCI_DEFAULT);
oci_close($c);
sleep(30);
?>
What I would expect is that the script would connect to the pool, do the work for a tiny moment and then release the connection for usage by other script.
But after I point the browser to the script, I get a 30 second loading time (as expected) but the server is busy all the time, like this:
SQL> SELECT INST_ID,NUM_BUSY_SERVERS FROM GV$CPOOL_STATS;
INST_ID NUM_BUSY_SERVERS
1 0
2 1
After the 30 second sleep, it is released and busy servers are back to 0.
If I load the server with ab using 256 connections:
ab -n 1000000 -c 256 -k http://mywebserver/ocitest.php
the pool is maxed out and the connects are stalling:
SQL> SELECT INST_ID,NUM_BUSY_SERVERS FROM GV$CPOOL_STATS;
INST_ID NUM_BUSY_SERVERS
1 95
2 95
My network config for this service is following:
IWPPOOLED =
(DESCRIPTION =
(LOAD_BALANCE=ON)
(FAILOVER=ON)
(ADDRESS = (PROTOCOL = tcp)(HOST = 10.1.16.33)(PORT = 1521))
(ADDRESS = (PROTOCOL = tcp)(HOST = 10.1.16.34)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = IWP)
(SERVER=POOLED)
(FAILOVER_MODE=
(TYPE=SELECT)
(METHOD=BASIC)
(RETRIES=5)
(DELAY=3)
The phpinfo() look like this:
OCI8 Support enabled
Version 1.3.4
Revision $Revision: 1.269.2.16.2.38.2.20 $
Active Persistent Connections 1
Active Connections 1
Oracle Instant Client Version 11.1
Temporary Lob support enabled
Collections support enabled
Directive Local Value Master Value
oci8.connection_class IWPAPP IWPAPP
oci8.default_prefetch 100 100
oci8.events On On
oci8.max_persistent -1 -1
oci8.old_oci_close_semantics Off Off
oci8.persistent_timeout -1 -1
oci8.ping_interval -1 -1
oci8.privileged_connect Off Off
oci8.statement_cache_size 20 20
I am using the instant client for 11g
Any ideas?
Thanks!
Michal

Don't forget to use oci_free_statement($s); See "Closing Oracle Connections" in The Underground PHP and Oracle Manual. (I was just simplifying this example today for the next release of the manual).
You may also see the "dedicated optimization", where a pooled server in a non- maxed-out pool is retained (unless needed by another PHP process) under the assumption that the initial PHP process might become active again. See http://www.oracle.com/technology/tech/php/pdf/php-scalability-ha-twp.pdf
Feel free to email me offline (see my profile) if there are questions/data you don't want to post.
cj
Edited by: cj2 on Oct 16, 2008 8:12 AM

Sound does not transfer to TV when using HDMI in Mavericks?

Hi Everyone,
When I connect my MBP to my Samsung smart TV via hdmi the picture goes across perfectly but the sound stays on the MBP!
Anyone know why this might be?
My MBP is latest late 2013 model, 2.6Ghz 16Gb Ram with Nvidia GeForce GT 750M
Thanks in advance.
Mark (UK)

Hello,
I have the exact same problem! I can't find any hdmi settings in the system prefrences > Sound.
Also same model (late 2013).
Does anyone know why this isn't working? I hope i'm just mistaken because 2300$ is a lot of money for a laptop that can't stream audio through HDMI.
Gr,
Tonc.

CSM does not show rule numbers when using sections?

I started using sections in access rules within CSM 4.2 but all the rules that are within these section do not show anymore the rule number in the list.
Can this be changed? Is this a bug?

The numbers are shown, but you have to expand the column. Somehow cisco makes the no. column to small to see the numbers in a section by default. And they replace the numbers with a dot or two as soon as it is too small to display the numbers.

Hosted Build Controller does not build test project when using GitContinuousDeploymentTemplate.12.xaml

So basically my unittest project using mspec is not even built and copied to the outputfolder even though I build the sln file. This happens only if I put in a azure deployment environment in the build. It works with exactly the same parameters if I just
remove the azure deployment parameter in the same template. I really don't get why it's impossible to run unit tests and fail the build before deploying to staging. Is it supposed to be like this?

Hi Espen,
I would like to know what you mean when you say "put in a Azure deployment environment in the build", and whether you have run a post script during the build process. Please give out more details about your scenario, or share you build log here. You can
check whether it's build fine locally by using MSBuild or build directly with Visual Studio.
Maybe you can check whether the Azure environment has the right version of mspec test adapter. Or use Nuget package restore feature to include the needed files in your solution before building. If the build related to hosted build controller, you can configure
an on-premise build controller for VSO. See this
thread for more information.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
By Azure deployment variable I mean "Windows Azure Deployment Environment" variable which you can configure under the Process tab after rightclicking the build definition and clicked "Edit build definition" in Visual Studio.
I actually figured out what was wrong though. When "Windows Azure Deployment Environment" is set, the build target is set to <your_azure_project>:Publish. This target probably only builds the projects useful for that particular project, hence the unittest
project is not built. I fixed the issue by adding a msbuild argument under 2.Build->5.Advanced->MSBuild arguments. I had to set it to "/t <your_azure_project>:Publish;Build" and all worked well. Notice the order of the targets though. If I used
Build first, the whole build failed with some error trying to some virtual web folder. Also, <your_azure_project> is not entirely correct. At least for me it's named like My.Azure.Project, but the build target is My_Azure_Project.
I don't really know if it's supposed to be this way, but it looks to me like a small bug in the template at least.

Macbook does not see Appletalk Zones when using the airport

Anyone having a problem with seeing appletalk zones on a Macbook OS version 10.4.9 using the airport wireless connection? I have enabled Appletalk and no zones show up. I have an older Powerbook G4 running 10.4.8 and it sees the zones just fine via its Airport connection. It also shows up when I connect the MacBook via an ethernet conneciton but not via the airport. I am trying to get this fixed so I can use my old LaserWriter 4/600 printer. I don't understand why it works on the PowerBook but not the Macbook.
Anyone got any ideas?
Thanks for the help

Apple Tech Support solved this problem quickly and easily. In short, the USB connected printer was pointed to the computer and not the Airport Express. Here's what they ran me through:
- Assumes the Airport Express sees the printer as connected via USB
1. Open System Preferences > Print & Fax
2. Regardless of the printers you see, click the "+" button to add a printer
3. Select the Default icon
4. Check the Kind... should be Bonjour
5. Select the printer type connected to the Airport Express... the system will start to add such a printer
6. Ensure the Location is the Airport Express (mine was previously pointed to the MacBook)
-- You can change the name here is you like also such as "Kitchen HP Photosmart c4480)... recommend a different name than the original one installed so you know which one to remove later
7. Select Add
8. Remove the original printer which is pointing to the MacBook
You should be good to go.... Key points: Bonjour and Location as the Airport Express

FailureHandlerExample does not seem to work when used in the ProcessModelPostStepFailure Sequence of the SequentialModel

I've incorporated the FailureHandlerExample into my Test Sequences (with some minor modifications) and it works ok when it is in the SequenceFilePostStepFailure in my Sequence File. However, it says in the Sequence comments that this can be made into a ProcessModel Sequence by putting into the ProcessModelPostStepFailure Sub Sequence of the SequentalModel. I tried this, and it doesn't work. It has the same internal steps as the SequenceFilePostStepFailure Sequence, but it never gets called. What do I need to do to get this to work properly in the event of a failure?

I have just tried the callback and it works for me. Here is what I did.
1) open new sequence file.
2) double click on model path shown at the bottom of the sequence editor. This opens model file associated with the new sequence file.
3) with the process model file active, select Edit>>Sequence File Callbacks
4) select ProcessModelPostStepFailure in the dialog box provided, click the Add button and then the Edit button.
5) Add a message popup to the newly created ProcessModelPostStepFailure.
6) Return to the new sequence file created in step 1 above.
7) select the None adapter and insert a Numeric Limit Test step type.
8) change the step limits to be 5 and 10. The step will then fail since the default measurement is 0, outside of the limits.
9) run the sequenc
e by selecting Execute>>Single Pass.
The step fails and the ProcessModelPostStepFailure is called, displaying the message popup.
See if this works for you.

Music does not play on Iphone when using the Remote app for Itunes , is this normall.

Hi all,
I am using the remote App for ITunes on my IPhone 5,I can get the phone to operate
ITunes perfectly but there is no audio coming from the phone, I am having a party and I
want to play the same playlist throughout the house without having it up at full volume.
I was hoping to leave the laptop downstairs and plug the IPhone into a stereo upstairs.
If this is normal ...........
Is it possible to load the playlist on to 2 computers , and have them playing the same music
simultaneously.
Any suggestions please

See http://discussions.apple.com/thread.jspa?messageID=9926596

Re: msi x99 gaming 9 ack does not detect capture card when using with xsplit

I concur with all of badboy2k's thoughts. He puts forth a very good explanation, and it makes sense.
I'd get the power supply out and get a good branded power supply (Seasonic is my preference at this time)....

I have a MSI z87-GD65 and I cannot get the computer to reboot.
I am on a fresh windows 7 install.
Specs
i5 4690k
EVGA GTX 670
EVGA 750w
G skill 2x8gb 2400
samsung 250gb ssd
Did:
Latest bios update from msi
CMOS reset
Latest Intel ME driver from msi

I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

Before you connect any device to a new library go to the Devices tab of the the preferences panel via Edit > Preferences (Windows) or iTunes > Preferences (Mac) and ensure the box next to Prevent iPods, iPhones, and iPads from syncing automatically is ticked. You can now safely connect the device to your computer without the danger of media being automatically deleted or overwritten.
To get all your content off your connect your iPad to your new computer.
Then use a 3rd party piece of software to transfer your content
I have found Senuti useful but there are others listed in the article I linked to in a previous post.
https://discussions.apple.com/docs/DOC-3991
That will let you transfer your non purchased content
For Purchased content log in to iTunes on the new computer
In Itunes Store click on Purchased under the Quick Links section on the right.
Download any music by clicking on the cloud button

My table of contents does not use the entry style I select for words in the paragraph that have character styles applied to them in the chapter, so some of the letters are showing up as green, which is fine in the chapter but not in the TOC.

My table of contents does not use the entry style I select for words in the paragraph that have character styles applied to them in the chapter, so some of the letters, specifically parameters, are showing up green, which is fine in the chapter but not in the TOC. I can manually fix this in the TOC by changing the character style to none after the toc has been generated, but I don't want to do this.

What application are you running? Please ask this in the forum of the product you're using.

SCORM-Based Presenter content does not track in LMS when using IE9 or above

Similar Messages

Maybe you are looking for