SCORM - Compatible files for eLearning

Hi.
Where can a find SCORM compatible files for eLearning?
BR.
Goppan

Search through the iPod Discussions pages for some software recommendations.
QuickTime Pro doesn't open MPEG-2 (DVD format) without third party help and can't extract audio tracks from the files.

Similar Messages

  • SCORM package files for Dreamweaver/Coursebuilder interactions

    Gentlefolk;
    Trying to see if I can get Dreamweaver (CS3) with Coursebuilder interactions to play with LearnCenter LMS. The site is not loading because the LMS can't find the SCORM manifest files.
    I don't see an export function in Dreamweaver that would create the manifest files. Is there a way to generate the manifest files, so LearnCenter has something to grab onto?
    Or have I tumbled to the reason everyone is using Captivate?
    Many thanks!
    Don

    Hi Vijay;
    It has been a while since I started this thread or even looked at it, so I am hazy on my original inquiry. I will have to look again. Short answer to your question however is that every tool I play whith that outputs to SCORM-compliant content automagically creates the manifest files and all the related support files.
    I just wanted to acknowledge your message right now. Let me look at the original thread and see if I have any more information that may directly assist you.
    Don

  • HT1349 I need to restore back to 1.0 on my Nano as iTunes upgraded automatically to 1.2 and it's not compatible with my car device. Where can i download the ispw and ispw.signature files for 1.0 ?

    I need to restore back to 1.0 on my Nano as iTunes upgraded automatically to 1.2 and it's not compatible with my car device. Where can i download the ispw and ispw.signature files for 1.0 ?

    I don't think it's possible if you are stuck in recovery mode but I may be wrong...
    Since your device qualifies for iOS 8(.1), that is the version that will be downloaded/restored to the iPad.
    I do know that you can restore your iPad (from backup & as new) and keep the same iOS version if you restore using the iPad itself under Settings/Reset/Erase All Content and Settings but since you can't access this because your stuck in recovery mode, the point is moot.
    Have you tried downloading the update in the middle of the night (2 am or so) where dropouts are much less likely to occur?
    It's always possible to take your device in to an Apple Store (make a Genius Bar reservation first) and do the iOS update there in the Apple Store.. I'm sure they will gladly help you out with it and not charge you a thing. The trouble with that would be if you don't have an Apple Store nearby.
    Sorry I couldn't be of any more help.

  • I have a Sony DCR -SR32 which does not appear in the list of compatible cameras for imovie '11. Does anyone know if there is way to import files from this camera ?

    I have a Sony DCR-SR32 HDD video camera which does not appear in the list of compatible cameras for imovie '11. Does anyone know if there is way of importing video from this camera to imovie ?
    Thanks
    Pheona

    Greetings Pheona,
    That appears to be a hard drive based camecorder.  Usually these mount on the desktop of your computer as a little white hard drive icon.  If you go inside you should be able to find the movie files the camera is saving.  See what format they are (the last 3 letters at the end of the file name is a good place to start).
    You can drag the movie files from the camera hard drive to the computer to copy them.  Then convert them with a video file conversion program to a format iMovie can understand.
    Try converting one of the files using a video file conversion program like Video Monkey: http://videomonkey.org/downloads/
    In the "Convert to" drop down menu choose "DV" (Preferred), "Quicktime", or "MP4".  Then import the resulting file into iMovie and see if that works any better.
    If that program can't convert the files you can try another file conversion program:
    http://www.southpolesoftware.com/iVI/iVI.php
    http://shedworx.com/voltaichd
    http://www.elgato.com/elgato/na/mainmenu/products/Turbo264HD-software/product1.e n.html
    Hope that helps.

  • I have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please..

    i have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please

    Did you buy PSE in the mac app store? If not, just go to Help>Updates in the editor and update camera raw and you should be able to open the raw files in PSE 12 directly without the DNG converter.

  • What are compatible media files for the Tungsten E2

    I have a video clip that I'd like to put on my Tungsten E2.  The current file is saved as a .wmv.  When I attempt to sync using the Palm desktop software's media feature, I get the message that the file format is not compatible.   I can't find any information as to what are compatible file formats.  Any advice for me?
    Post relates to: Tungsten E2

    Avi's and mpg's are pretty safe.  Wmv's and .mov's won't sync.
    Wyrenut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Create PDF Compatible File Revisited AGAIN for PC

    Hi all,
    I know my way around a Mac, but I would like to help a PC buddy of mine out, too to achieve the same thing—that is, changing the code in the Illustrator preferences file so that every time you save you don't automatically save a PDF compatible file.
    Can anyone help me find my way through the directories for the Preferences file on a PC?
    Thanks
    Re: Create PDF Compatible File Revisited
    Sorry,  I was thinking of the New Document Profiles. Try  Users>(yourname)>Library>Preferences>Adobe Illustrator CS4  Settings.

    see this thread http://forums.adobe.com/thread/655678?tstart=0 (number 6)

  • How to Install Plug-in for PS cs5 to open RAW (.NEF) file for Nikon D810 Camera

    I need someone to walk me through how to install a Plug-in for PS cs5 to open RAW (.NEF) file for Nikon D810 Camera.
    I haven't used photoshop in ages and I got a new camera. I have been on the phone with Adobe (no help) and spent a couple of hours online trying to figure this out. I'm confused, frustrated and about to throw my computer out the window.
    Also, I placed this in the "Photoshop for Beginners" since Photoshop CS5 doesn't appear anymore. I know CS5 is outdated but I spent hundreds of dollars on this program and you would think adobe would still honor its product.
    Any guidance is much appreciated.
    AJ

    Odds are cs5 is too old. If you do a search on my the main Adobe website there is a list of compatible cameras for the last known update to camera raw for cs5.
    Each version of Photoshop only gets so many updates for camera raw then it is necessary to upgrade Photoshop to get the next update for camera raw.
    So you currently have 4 choices.
    1 upgrade Photoshop
    2 get Lightroom - latest version
    3 get Photoshop elements -latest version
    4 get dng converter - this will download the latest version an is the only option that is free.
    The dng converter can be found by searching Adobe website.

  • Why does Bridge Need Illustrator to Save as PDF compatible file?

    1. Why does Bridge need Illustrator files to be saved as PDF files? "PDF Compatible File" ticked in the save menu.
    2. Why does saving with this info take so long, even on decent fast modern systems?
    3. Why does Bridge not consistently render the Illustrator files in FULL RESOLUTIONS, seemingly shooting for half resolution much of the time, and simply stopping at that?
    4. Why does "clicking" on the preview inside Bridge bring up the full resolution?
    5. How do I shortcut this process so that every file is previewed in Full RESOLUTION, instantly?
    What is the point of Bridge?  What's its reason for existence?
    First time user of Bridge.

    Since someone is bound to say that this should be asked in the Bridge section... it already is.  And has been referenced back over here.
    You can find it here:
    http://forums.adobe.com/message/5655632#5655632
    Answer wherever you see fit, if you're up to the task of dealing with someone attempting to have a broader view, perhaps also suffering from somewhat objective analysis that sometimes contains direct criticism of the way Adobe does things.

  • Uncheck "Create PDF Compatible File" and "Use Compression" as my default save preference?

    We have discovered that unchecking the "Create PDF compatible file" generates much smaller .ai files when saved.  Since we do not need them to be PDF compatible we want to save them this way every time.  But right now every time we go to save a file the box comes up pre-checked!  We have to uncheck it every time!  Surely there is a preference setting somewhere that we can change so that the default is for these boxes to come up unchecked?
    I have looked under preferences and do not see it.
    Thanks
    The Print Craftsman.

    Which version of Illustrator are you using?
    Usually those settings could be changed by modifying the AIPrefs file.

  • "create pdf compatible file" gets tuned off when running batch

    I created an action that resizes an image and the saves it in the same format (AI) and then close the file. Next I open the AI formatted file I just created in PhotoShop it opens and looks great. So I go back to Illustrator and run the same action in a batch where I open a folder containing AI files run the action and save the files in a different folder. Now I try to open the files in PhotoShop and find out that the batch function some how turned off create pdf compatible file option when it got to save as in the action so now Im unable to open the file in PhotoShop. Im new to illustrator Im using cs4. Thank you for reading do you have any ideas?

    Thanks to all, I really appreciate all the pains which all of you have taken in resolving my problem.
    It wasn't Java problem, rather batch file problem. I was only changing the directory, and was not providing for the exe file to run.
    @echo off
    cd  "C:\JBoss\jboss-4.0.5.GA\bin\Fastran"
    "C:\JBoss\jboss-4.0.5.GA\bin\Fastran\FASTRAN.EXE"
    ren FTN04 FTN04i
    EXIT
    :finishNow it is working fine.
    I did check the access permissions, no problem with that I guess. The problem was with the path. The batch file couldnt go pass bin directory, and I noticed that only today ;(. At any rate, I changed that and now it is all smooth and dandy.
    Once again, thanks a lot.

  • Where can i download an install file for Photoshop Elements 5

    So, PE5 came with my Sony Vaio (Vista) on a recovery DVD. my computer has since died and i bought a new one running window 8.1, with no optical drive.
    1. I am having huge difficulty finding a download file for PE5, does anyone know where i can find one?
    or
    2. If i bought an external DVD optical drive, could i even run restore for that program due to windows changes?
    thanks!

    1. There is no download available for PSE5.  The oldest version available is 7.
    2.  If you mean you are wondering if the software is compatible with Windows 8, I would tend to think not.  Rather than buying an external drive you could consider buying the latest version of PSE instead.

  • .exe projector file for PC works fine, but extracted .hqx for Mac won't open when on CD

    I'm using Flash MX, AS 2, Projector 6, working on a PC.
    I saved two versions of my project -- one .exe for Windows and one .hqx for Mac.  The .exe works fine when burned onto a CD.  When opening the .hqx from a CD on a Mac, I got a message that the file is on a locked volume.  I discovered that the reason for this is that an .hqx is essentially a zipped file which has to be extracted, and when a file is extracted, the unzipped files are written onto the same location as the original.  When the original files are on a CD, Stuffit (Mac's zip extractor program) can't write onto that location.
    [So if anyone at Adobe looks at these forum posts, let me say that I think its absolutely ridiculous that the Mac version of Flash's projector files have to be extracted in order to be viewed!]
    To get around this problem, I saved the .hqx on my PC, put it on a portable hard drive and brought it over to a Mac (because Stuffit for PC converts it into an .exe for PC), and unzipped it.  When I'd test it on the portable hard drive or on a USB drive, the extracted file would work.  When I'd bring it back over to the PC and burn a CD with both versions on it, and then test that CD on the Mac, it wouldn't work.  Can anyone tell me why the extracted Mac version works on a hard drive, but not on a CD?  What do I have to do in order to make a Mac projector file work from a CD?

    Windows uses the FAT file system, Macs use the HFS file system. The two are not compatible. If you save a Mac projector file on a FAT file system, it won't be saved properly and it won't work. When you create a Mac projector from a Windows version of Flash, the file will be saved as a compressed .hqx file.
    Since you need to use a Mac to create a hybrid CD, when you move that .hqx file to the Mac, unstuff it and then use the resulting file for the CD. It will then run from the CD as expected.

  • Making a PDF X3 file for printing in only 1 colour (black)

    Hi,
    Sorry but it seems I need again some help.
    From InDesign CS 3 I am making (Print to Adobe PDF) a PDF file for a printing house (books and magazines).
    I need to do a PDF X3 compatible file, and among other settings it checks that indeed the file has only black, no other colors. I do this trough "Print to Adobe PDF" because while working, my text is colored so that I can more easily identify the styles in use. Then I print with the option "Composite CMYK" and "Text as Black". I also use crop marks.
    The problem is is that when checking the PDF X3 compatibility, the crop marks appear as a second color (Registered) so the file is flagged as having problems.
    What settings must I use so that the file cheks OK, that it has only black (1 colour) and can be generated by using "print to" and not "export as"?
    Thanks for the help,
    ionP

    Thank you for your suggestion, unfortunately it seems this is not the solution.
    I did print as composite gray, before that in "Preferences" I changed the settings to "Printing/Exporting: Output All Blacks as Rich Black". But when checked the conformity to PDF X3 the crop marks are showed as special color (so that I have a PDF with 2 colors).
    I also checked with an Acrobat Plug-In, "Quite Revealing", and it shows also 2 colors, Black (which is OK) and Registration (and that is not not OK). It should show only "Black", which it does if I do not put crop marks, but I need the crop marks.
    ionP

  • How can I reduce the size of a pdf file for emailing?

    I want to send a pdf file which is 8 mb, it has bounced in an email because it is too big, how can I reduce the size of the pdf file for emailing?

    Sometimes a simple "Save As" will reduce the file size slightly, but probably not enough to pass the <8 mb threshold of your recipient, as you need.
    You've probably seen it, try the next option in the Save As menu, "Reduced Size PDF," and make it compatible with the latest version possible, again considering the recipient. This suggestion assumes Acrobat X. You don't say which version you're using, but this tool was available at least going back to Version 8, but in a different place, you'll have to hunt.
    If all that doesn't work, you could remove some images from the source document, which also will reduce the overall size.
    Best luck.

Maybe you are looking for