Scorm Content Not Created in Presenter

I have some existing content that i would like to run in
Breeze. When i try to upload the zipped SCORM package, it wont
recognise the zip, despite zip being an accepted file format. The
only thing i can see in the guidance that might be an issue is that
the package files are different and Breeze/Connect requires an
index.html doc, but this is not how the content is packaged in the
content i have.
Has anyone got experience of using content not created using
Presenter? Will it work?

Breeze / Connect Training does not support a SCORM package.
See more in this post:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=394&threadid=1117904

Similar Messages

BDoc's not created when downloading certain partners

Hi,
we have a problem when downloading certain partners from R/3.
Adapter Object CUSTOMER_MAIN
Source Site: ECC 6.0
Target Site: CRM 2007
For certain partners, BDocs are regularly created, for some the status is "OK - green" in R3AR but when trying to search for BDocs there is a message "No BDocs found for this Request / Initial Load".
Clearly the partners are not created and present in BP.
Anyone encountered this error?
Thank you

Hi,
If there is a valication error or an error in update task at the CRM system, the BDocs shoudl ideally be in interrmediate state.
However you can still search for entries in transaction sm13 to check if there are any update failures. Also make sure that
you are not searching for only fully processed BDoc in smw01.
If none of the above holds good, there would be some sysfail for R3AI_BUPA* in smq2. Please check the above. If still in doubt, reply back.
Best Regards,
Shourav

Presenter SCORM courses not scoring correctly in Firefox

We are having an issue with SCORM courses created in Presenter not communicating back the correct quiz score when using the new version of Firefox. These courses worked properly in the older version of Firefox. I can provide the course if needed. The courses were created in Presenter 7.0.5.7588. Tried creating the course in version 10 but it still didn't work.
Logs:
https://cloud.scorm.com/sc/guest/ViewDebugLog?logId=2e8e43d1-aad9-4b92-85ee-cfc285d66142&c ourseTitle=Adobe_Presenter
https://cloud.scorm.com/sc/guest/ViewDebugLog?logId=67e35d6e-e3a7-46ee-9a43-02c5d5840e5c&c ourseTitle=Adobe_Presenter
https://cloud.scorm.com/sc/guest/ViewDebugLog?logId=d419225a-24b7-46df-864a-70cb547ae5e4&c ourseTitle=Adobe_Presenter
https://cloud.scorm.com/sc/guest/ViewDebugLog?logId=b297a9ab-af2a-484a-b051-7ee0f0ae8e97&c ourseTitle=Adobe_Presenter

Hello,
Thank you for your reply. I have tried changing the reporting options to score vs. percentage and that doesn't work either. My LMS is Mzinga (Knowledge Planet). Below are screen shots of my settings.
How do I get the "Mastery Score" section of the Manifest settings to be available (mine is grayed out)? I read something about this on one of the disscussion forms but can't fibgure out what I'm missing to make it available. Could this setting have something to do with my issue?

Can I create multiple presentation templates against one content item?

I want to create multiple presentation templates that publish the same content item in different ways.
As far as I can tell from the publisher GUI this is not possible.
Am I missing something?

It may not be feasible to have two PT associated with a DT technically. But there is a workaround / solution for your requirement. thats what i meant in my prev post.
To accomplish your requirement in a simple fashion try doing this
1) copy the contents of all PT, DT and Content Items with all its folders in the _NEWS (portlet templates) folder to a new folder called 'PortletA' (or) make use of the News portlet template to create a portlet
2) Now modify the DT's and PT's according to your requirement.
3) Create a portlet using "Published Content" webservice and configure the 'Main' to your portlet.
4) if you create and pblish new article, you can find two html's are getting published.
If this doesn't resolve your requirement,
Create two sets of Dt & Pt's. In the article PT, try to add the other Pt as "related items to publish", so on publishing one the other one gets published.
Bharat Karthik
[email protected]
http://www.eminenttech.com/
Edited by bharatkarthik at 09/05/2007 2:35 PM

Not Attempted page on scorm content

hi all,
I' ve import scorm content, create offering and publish it. But when a user tryng to access the page, it always displays a 'Not Attempted' page, with a 'Home' link. Whats wrong ? Any idea ?
thanks
- andar -

hi, who can i have this information. In apache access log, i notice 2 redirection when i click to launch a content.
192.168.1.102 - - [28/Jun/2007:10:12:09 +0000] "GET /ilearn/en/learner/jsp/attempt.jsp?action=start&rco_id=-1&classroom_id=226 HTTP/1.1" 302 582
192.168.1.102 - - [28/Jun/2007:10:12:09 +0000] "GET /ilearn/en/learner/jsp/player.jsp?rco_id=219&classroom_id=226&home_url=http%3A%2F%2Fld-landry%3A7777%2Filearn%2Fen%2Flearner%2Fjsp%2Fuser_home.jsp HTTP/1.1" 302 378
192.168.1.102 - - [28/Jun/2007:10:12:10 +0000] "GET /ilearn/en/learner/jsp/player_error.jsp?message=NOT_ATTEMPTED&classroom_id=226 HTTP/1.1" 200 821
So i dont think this error came from the content. I repeat that i have this error also with defaut content installed with ilearning.
Can some one explain me what going wrong?

Why is my flash content not working on my dreamweaver created html site?

This is a problem that's happening on my website I'm creating. I created a quick test website to show you the problem on the fourm. It's the same problem, and if you can provide the solution to this test website I can apply it to my main website.
Test website on server:
test331754952.net23.net
What I did:
-launched flash
-typed "test" and made it spin 360 degrees
-published swf
-launched dreamweaver
-created a site
-moved swf to site folder
-saved a html file to the site folder
-in dreamweaver, went to insert, media, swf, then selected the swf I made
-it inserted the swf, creating a gray placeholder for it
-re-saved the html document, at which point dreamweaver created a folder named script and 2 files, an swf, and a javascript file
Site Directory:
Scripts Sub-Directory:
What happens:
-when I launch the swf on my machine, it plays fine
-when I open the swf directly on the test website on the server, it plays fine
-when I open the html with the embended swf on the test website on the server, it shows a gray box, then goes white
-In dreamweaver, when I go to preview in browser and choose internet explorer, it tells me I don't have new flashplayer(I do: flashplayer 11)
Ie also pokes up a box at the bottom that says its not allowing content. When I click allow content, it creates a gray box
-In dreamweaver, when I go to preview in borwser and choose google chrome, it tells me flash player has stopped a potentionally unsafe operation. When I close this dialog box, it gives me a gray box where my swf should be embeded.
-I've tried changing global flash secuirty setting and it does nothing
-I've tried visiting the test website on multiple computers in my household to no avail
-I've tried having friends visit the site on their computer at their house to no avail
-I did't touch the code on this test website-the code is exactly what dreamweaver generated
Html Document Code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
</head>
<body>
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="550" height="400" id="FlashID" title="test">
<param name="movie" value="test.swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="15.0.0.0" />

<param name="expressinstall" value="Scripts/expressInstall.swf" />


<object type="application/x-shockwave-flash" data="test.swf" width="550" height="400">
    
    <param name="quality" value="high" />
    <param name="wmode" value="opaque" />
    <param name="swfversion" value="15.0.0.0" />
    <param name="expressinstall" value="Scripts/expressInstall.swf" />
    
    <div>
      <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
      <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
    </div>
    
</object>

</object>
<script type="text/javascript">
swfobject.registerObject("FlashID");
</script>
</body>
</html>
Javascript file code(the one dreamweaver made when I inserted swf):
/*! SWFObject v2.0 <http://code.google.com/p/swfobject/>
Copyright (c) 2007 Geoff Stearns, Michael Williams, and Bobby van der Sluis
This software is released under the MIT License <http://www.opensource.org/licenses/mit-license.php>
var swfobject = function() {
var UNDEF = "undefined",
OBJECT = "object",
SHOCKWAVE_FLASH = "Shockwave Flash",
SHOCKWAVE_FLASH_AX = "ShockwaveFlash.ShockwaveFlash",
FLASH_MIME_TYPE = "application/x-shockwave-flash",
EXPRESS_INSTALL_ID = "SWFObjectExprInst",
win = window,
doc = document,
nav = navigator,
domLoadFnArr = [],
regObjArr = [],
timer = null,
storedAltContent = null,
storedAltContentId = null,
isDomLoaded = false,
isExpressInstallActive = false;
/* Centralized function for browser feature detection
- Proprietary feature detection (conditional compiling) is used to detect Internet Explorer's features
- User agent string detection is only used when no alternative is possible
- Is executed directly for optimal performance
var ua = function() {
var w3cdom = typeof doc.getElementById != UNDEF && typeof doc.getElementsByTagName != UNDEF && typeof doc.createElement != UNDEF && typeof doc.appendChild != UNDEF && typeof doc.replaceChild != UNDEF && typeof doc.removeChild != UNDEF && typeof doc.cloneNode != UNDEF,
   playerVersion = [0,0,0],
   d = null;
if (typeof nav.plugins != UNDEF && typeof nav.plugins[SHOCKWAVE_FLASH] == OBJECT) {
   d = nav.plugins[SHOCKWAVE_FLASH].description;
   if (d) {
    d = d.replace(/^.*\s+(\S+\s+\S+$)/, "$1");
    playerVersion[0] = parseInt(d.replace(/^(.*)\..*$/, "$1"), 10);
    playerVersion[1] = parseInt(d.replace(/^.*\.(.*)\s.*$/, "$1"), 10);
    playerVersion[2] = /r/.test(d) ? parseInt(d.replace(/^.*r(.*)$/, "$1"), 10) : 0;
else if (typeof win.ActiveXObject != UNDEF) {
   var a = null, fp6Crash = false;
   try {
    a = new ActiveXObject(SHOCKWAVE_FLASH_AX + ".7");
   catch(e) {
    try {
     a = new ActiveXObject(SHOCKWAVE_FLASH_AX + ".6");
     playerVersion = [6,0,21];
     a.AllowScriptAccess = "always"; // Introduced in fp6.0.47
    catch(e) {
     if (playerVersion[0] == 6) {
      fp6Crash = true;
    if (!fp6Crash) {
     try {
      a = new ActiveXObject(SHOCKWAVE_FLASH_AX);
     catch(e) {}
   if (!fp6Crash && a) { // a will return null when ActiveX is disabled
    try {
     d = a.GetVariable("$version"); // Will crash fp6.0.21/23/29
     if (d) {
      d = d.split(" ")[1].split(",");
      playerVersion = [parseInt(d[0], 10), parseInt(d[1], 10), parseInt(d[2], 10)];
    catch(e) {}
var u = nav.userAgent.toLowerCase(),
   p = nav.platform.toLowerCase(),
   webkit = /webkit/.test(u) ? parseFloat(u.replace(/^.*webkit\/(\d+(\.\d+)?).*$/, "$1")) : false, // returns either the webkit version or false if not webkit
   ie = false,
   windows = p ? /win/.test(p) : /win/.test(u),
   mac = p ? /mac/.test(p) : /mac/.test(u);
/*@cc_on
   ie = true;
   @if (@_win32)
    windows = true;
   @elif (@_mac)
    mac = true;
   @end
return { w3cdom:w3cdom, pv:playerVersion, webkit:webkit, ie:ie, win:windows, mac:mac };
/* Cross-browser onDomLoad
- Based on Dean Edwards' solution: http://dean.edwards.name/weblog/2006/06/again/
- Will fire an event as soon as the DOM of a page is loaded (supported by Gecko based browsers - like Firefox -, IE, Opera9+, Safari)
var onDomLoad = function() {
if (!ua.w3cdom) {
   return;
addDomLoadEvent(main);
if (ua.ie && ua.win) {
   try { // Avoid a possible Operation Aborted error
    doc.write("<scr" + "ipt id=__ie_ondomload defer=true src=//:></scr" + "ipt>"); // String is split into pieces to avoid Norton AV to add code that can cause errors
    var s = getElementById("__ie_ondomload");
    if (s) {
     s.onreadystatechange = function() {
      if (this.readyState == "complete") {
       this.parentNode.removeChild(this);
       callDomLoadFunctions();
   catch(e) {}
if (ua.webkit && typeof doc.readyState != UNDEF) {
   timer = setInterval(function() { if (/loaded|complete/.test(doc.readyState)) { callDomLoadFunctions(); }}, 10);
if (typeof doc.addEventListener != UNDEF) {
   doc.addEventListener("DOMContentLoaded", callDomLoadFunctions, null);
addLoadEvent(callDomLoadFunctions);
function callDomLoadFunctions() {
if (isDomLoaded) {
   return;
if (ua.ie && ua.win) { // Test if we can really add elements to the DOM; we don't want to fire it too early
   var s = createElement("span");
   try { // Avoid a possible Operation Aborted error
    var t = doc.getElementsByTagName("body")[0].appendChild(s);
    t.parentNode.removeChild(t);
   catch (e) {
    return;
isDomLoaded = true;
if (timer) {
   clearInterval(timer);
   timer = null;
var dl = domLoadFnArr.length;
for (var i = 0; i < dl; i++) {
   domLoadFnArr[i]();
function addDomLoadEvent(fn) {
if (isDomLoaded) {
   fn();
else {
   domLoadFnArr[domLoadFnArr.length] = fn; // Array.push() is only available in IE5.5+
/* Cross-browser onload
- Based on James Edwards' solution: http://brothercake.com/site/resources/scripts/onload/
- Will fire an event as soon as a web page including all of its assets are loaded
function addLoadEvent(fn) {
if (typeof win.addEventListener != UNDEF) {
   win.addEventListener("load", fn, false);
else if (typeof doc.addEventListener != UNDEF) {
   doc.addEventListener("load", fn, false);
else if (typeof win.attachEvent != UNDEF) {
   win.attachEvent("onload", fn);
else if (typeof win.onload == "function") {
   var fnOld = win.onload;
   win.onload = function() {
    fnOld();
    fn();
else {
   win.onload = fn;
/* Main function
- Will preferably execute onDomLoad, otherwise onload (as a fallback)
function main() { // Static publishing only
var rl = regObjArr.length;
for (var i = 0; i < rl; i++) { // For each registered object element
   var id = regObjArr[i].id;
   if (ua.pv[0] > 0) {
    var obj = getElementById(id);
    if (obj) {
     regObjArr[i].width = obj.getAttribute("width") ? obj.getAttribute("width") : "0";
     regObjArr[i].height = obj.getAttribute("height") ? obj.getAttribute("height") : "0";
     if (hasPlayerVersion(regObjArr[i].swfVersion)) { // Flash plug-in version >= Flash content version: Houston, we have a match!
      if (ua.webkit && ua.webkit < 312) { // Older webkit engines ignore the object element's nested param elements
       fixParams(obj);
      setVisibility(id, true);
     else if (regObjArr[i].expressInstall && !isExpressInstallActive && hasPlayerVersion("6.0.65") && (ua.win || ua.mac)) { // Show the Adobe Express Install dialog if set by the web page author and if supported (fp6.0.65+ on Win/Mac OS only)
      showExpressInstall(regObjArr[i]);
     else { // Flash plug-in and Flash content version mismatch: display alternative content instead of Flash content
      displayAltContent(obj);
   else { // If no fp is installed, we let the object element do its job (show alternative content)
    setVisibility(id, true);
/* Fix nested param elements, which are ignored by older webkit engines
- This includes Safari up to and including version 1.2.2 on Mac OS 10.3
- Fall back to the proprietary embed element
function fixParams(obj) {
var nestedObj = obj.getElementsByTagName(OBJECT)[0];
if (nestedObj) {
   var e = createElement("embed"), a = nestedObj.attributes;
   if (a) {
    var al = a.length;
    for (var i = 0; i < al; i++) {
     if (a[i].nodeName.toLowerCase() == "data") {
      e.setAttribute("src", a[i].nodeValue);
     else {
      e.setAttribute(a[i].nodeName, a[i].nodeValue);
   var c = nestedObj.childNodes;
   if (c) {
    var cl = c.length;
    for (var j = 0; j < cl; j++) {
     if (c[j].nodeType == 1 && c[j].nodeName.toLowerCase() == "param") {
      e.setAttribute(c[j].getAttribute("name"), c[j].getAttribute("value"));
   obj.parentNode.replaceChild(e, obj);
/* Fix hanging audio/video threads and force open sockets and NetConnections to disconnect
- Occurs when unloading a web page in IE using fp8+ and innerHTML/outerHTML
- Dynamic publishing only
function fixObjectLeaks(id) {
if (ua.ie && ua.win && hasPlayerVersion("8.0.0")) {
   win.attachEvent("onunload", function () {
    var obj = getElementById(id);
    if (obj) {
     for (var i in obj) {
      if (typeof obj[i] == "function") {
       obj[i] = function() {};
     obj.parentNode.removeChild(obj);
/* Show the Adobe Express Install dialog
- Reference: http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=6a253b75
function showExpressInstall(regObj) {
isExpressInstallActive = true;
var obj = getElementById(regObj.id);
if (obj) {
   if (regObj.altContentId) {
    var ac = getElementById(regObj.altContentId);
    if (ac) {
     storedAltContent = ac;
     storedAltContentId = regObj.altContentId;
   else {
    storedAltContent = abstractAltContent(obj);
   if (!(/%$/.test(regObj.width)) && parseInt(regObj.width, 10) < 310) {
    regObj.width = "310";
   if (!(/%$/.test(regObj.height)) && parseInt(regObj.height, 10) < 137) {
    regObj.height = "137";
   doc.title = doc.title.slice(0, 47) + " - Flash Player Installation";
   var pt = ua.ie && ua.win ? "ActiveX" : "PlugIn",
    dt = doc.title,
    fv = "MMredirectURL=" + win.location + "&MMplayerType=" + pt + "&MMdoctitle=" + dt,
    replaceId = regObj.id;
   // For IE when a SWF is loading (AND: not available in cache) wait for the onload event to fire to remove the original object element
   // In IE you cannot properly cancel a loading SWF file without breaking browser load references, also obj.onreadystatechange doesn't work
   if (ua.ie && ua.win && obj.readyState != 4) {
    var newObj = createElement("div");
    replaceId += "SWFObjectNew";
    newObj.setAttribute("id", replaceId);
    obj.parentNode.insertBefore(newObj, obj); // Insert placeholder div that will be replaced by the object element that loads expressinstall.swf
    obj.style.display = "none";
    win.attachEvent("onload", function() { obj.parentNode.removeChild(obj); });
   createSWF({ data:regObj.expressInstall, id:EXPRESS_INSTALL_ID, width:regObj.width, height:regObj.height }, { flashvars:fv }, replaceId);
/* Functions to abstract and display alternative content
function displayAltContent(obj) {
if (ua.ie && ua.win && obj.readyState != 4) {
   // For IE when a SWF is loading (AND: not available in cache) wait for the onload event to fire to remove the original object element
   // In IE you cannot properly cancel a loading SWF file without breaking browser load references, also obj.onreadystatechange doesn't work
   var el = createElement("div");
   obj.parentNode.insertBefore(el, obj); // Insert placeholder div that will be replaced by the alternative content
   el.parentNode.replaceChild(abstractAltContent(obj), el);
   obj.style.display = "none";
   win.attachEvent("onload", function() { obj.parentNode.removeChild(obj); });
else {
   obj.parentNode.replaceChild(abstractAltContent(obj), obj);
function abstractAltContent(obj) {
var ac = createElement("div");
if (ua.win && ua.ie) {
   ac.innerHTML = obj.innerHTML;
else {
   var nestedObj = obj.getElementsByTagName(OBJECT)[0];
   if (nestedObj) {
    var c = nestedObj.childNodes;
    if (c) {
     var cl = c.length;
     for (var i = 0; i < cl; i++) {
      if (!(c[i].nodeType == 1 && c[i].nodeName.toLowerCase() == "param") && !(c[i].nodeType == 8)) {
       ac.appendChild(c[i].cloneNode(true));
return ac;
/* Cross-browser dynamic SWF creation
function createSWF(attObj, parObj, id) {
var r, el = getElementById(id);
if (typeof attObj.id == UNDEF) { // if no 'id' is defined for the object element, it will inherit the 'id' from the alternative content
   attObj.id = id;
if (ua.ie && ua.win) { // IE, the object element and W3C DOM methods do not combine: fall back to outerHTML
   var att = "";
   for (var i in attObj) {
    if (attObj[i] != Object.prototype[i]) { // Filter out prototype additions from other potential libraries, like Object.prototype.toJSONString = function() {}
     if (i == "data") {
      parObj.movie = attObj[i];
     else if (i.toLowerCase() == "styleclass") { // 'class' is an ECMA4 reserved keyword
      att += ' class=" + attObj[i] + "';
     else if (i != "classid") {
      att += ' ' + i + '="' + attObj[i] + '"';
   var par = "";
   for (var j in parObj) {
    if (parObj[j] != Object.prototype[j]) { // Filter out prototype additions from other potential libraries
     par += '<param name="' + j + '" value="' + parObj[j] + '" />';
   el.outerHTML = '<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"' + att + '>' + par + '</object>';
   fixObjectLeaks(attObj.id); // This bug affects dynamic publishing only
   r = getElementById(attObj.id);
else if (ua.webkit && ua.webkit < 312) { // Older webkit engines ignore the object element's nested param elements: fall back to the proprietary embed element
   var e = createElement("embed");
   e.setAttribute("type", FLASH_MIME_TYPE);
   for (var k in attObj) {
    if (attObj[k] != Object.prototype[k]) { // Filter out prototype additions from other potential libraries
     if (k == "data") {
      e.setAttribute("src", attObj[k]);
     else if (k.toLowerCase() == "styleclass") { // 'class' is an ECMA4 reserved keyword
      e.setAttribute("class", attObj[k]);
     else if (k != "classid") { // Filter out IE specific attribute
      e.setAttribute(k, attObj[k]);
   for (var l in parObj) {
    if (parObj[l] != Object.prototype[l]) { // Filter out prototype additions from other potential libraries
     if (l != "movie") { // Filter out IE specific param element
      e.setAttribute(l, parObj[l]);
   el.parentNode.replaceChild(e, el);
   r = e;
else { // Well-behaving browsers
   var o = createElement(OBJECT);
   o.setAttribute("type", FLASH_MIME_TYPE);
   for (var m in attObj) {
    if (attObj[m] != Object.prototype[m]) { // Filter out prototype additions from other potential libraries
     if (m.toLowerCase() == "styleclass") { // 'class' is an ECMA4 reserved keyword
      o.setAttribute("class", attObj[m]);
     else if (m != "classid") { // Filter out IE specific attribute
      o.setAttribute(m, attObj[m]);
   for (var n in parObj) {
    if (parObj[n] != Object.prototype[n] && n != "movie") { // Filter out prototype additions from other potential libraries and IE specific param element
     createObjParam(o, n, parObj[n]);
   el.parentNode.replaceChild(o, el);
   r = o;
return r;
function createObjParam(el, pName, pValue) {
var p = createElement("param");
p.setAttribute("name", pName);
p.setAttribute("value", pValue);
el.appendChild(p);
function getElementById(id) {
return doc.getElementById(id);
function createElement(el) {
return doc.createElement(el);
function hasPlayerVersion(rv) {
var pv = ua.pv, v = rv.split(".");
v[0] = parseInt(v[0], 10);
v[1] = parseInt(v[1], 10);
v[2] = parseInt(v[2], 10);
return (pv[0] > v[0] || (pv[0] == v[0] && pv[1] > v[1]) || (pv[0] == v[0] && pv[1] == v[1] && pv[2] >= v[2])) ? true : false;
/* Cross-browser dynamic CSS creation
- Based on Bobby van der Sluis' solution: http://www.bobbyvandersluis.com/articles/dynamicCSS.php
function createCSS(sel, decl) {
if (ua.ie && ua.mac) {
   return;
var h = doc.getElementsByTagName("head")[0], s = createElement("style");
s.setAttribute("type", "text/css");
s.setAttribute("media", "screen");
if (!(ua.ie && ua.win) && typeof doc.createTextNode != UNDEF) {
   s.appendChild(doc.createTextNode(sel + " {" + decl + "}"));
h.appendChild(s);
if (ua.ie && ua.win && typeof doc.styleSheets != UNDEF && doc.styleSheets.length > 0) {
   var ls = doc.styleSheets[doc.styleSheets.length - 1];
   if (typeof ls.addRule == OBJECT) {
    ls.addRule(sel, decl);
function setVisibility(id, isVisible) {
var v = isVisible ? "inherit" : "hidden";
if (isDomLoaded) {
   getElementById(id).style.visibility = v;
else {
   createCSS("#" + id, "visibility:" + v);
function getTargetVersion(obj) {
     if (!obj)
         return 0;
var c = obj.childNodes;
var cl = c.length;
for (var i = 0; i < cl; i++) {
   if (c[i].nodeType == 1 && c[i].nodeName.toLowerCase() == "object") {
       c = c[i].childNodes;
       cl = c.length;
       i = 0;
   if (c[i].nodeType == 1 && c[i].nodeName.toLowerCase() == "param" && c[i].getAttribute("name") == "swfversion") {
      return c[i].getAttribute("value");
return 0;
function getExpressInstall(obj) {
     if (!obj)
         return "";
var c = obj.childNodes;
var cl = c.length;
for (var i = 0; i < cl; i++) {
   if (c[i].nodeType == 1 && c[i].nodeName.toLowerCase() == "object") {
       c = c[i].childNodes;
       cl = c.length;
       i = 0;
   if (c[i].nodeType == 1 && c[i].nodeName.toLowerCase() == "param" && c[i].getAttribute("name") == "expressinstall") {
       return c[i].getAttribute("value");
return "";
return {
/* Public API
   - Reference: http://code.google.com/p/swfobject/wiki/SWFObject_2_0_documentation
registerObject: function(objectIdStr, swfVersionStr, xiSwfUrlStr) {
   if (!ua.w3cdom || !objectIdStr) {
    return;
   var obj = document.getElementById(objectIdStr);
   var xi = getExpressInstall(obj);
   var regObj = {};
   regObj.id = objectIdStr;
   regObj.swfVersion = swfVersionStr ? swfVersionStr : getTargetVersion(obj);
   regObj.expressInstall = xiSwfUrlStr ? xiSwfUrlStr : ((xi != "") ? xi : false);
   regObjArr[regObjArr.length] = regObj;
   setVisibility(objectIdStr, false);
getObjectById: function(objectIdStr) {
   var r = null;
   if (ua.w3cdom && isDomLoaded) {
    var o = getElementById(objectIdStr);
    if (o) {
     var n = o.getElementsByTagName(OBJECT)[0];
     if (!n || (n && typeof o.SetVariable != UNDEF)) {
         r = o;
     else if (typeof n.SetVariable != UNDEF) {
      r = n;
   return r;
embedSWF: function(swfUrlStr, replaceElemIdStr, widthStr, heightStr, swfVersionStr, xiSwfUrlStr, flashvarsObj, parObj, attObj) {
   if (!ua.w3cdom || !swfUrlStr || !replaceElemIdStr || !widthStr || !heightStr || !swfVersionStr) {
    return;
   widthStr += ""; // Auto-convert to string to make it idiot proof
   heightStr += "";
   if (hasPlayerVersion(swfVersionStr)) {
    setVisibility(replaceElemIdStr, false);
    var att = (typeof attObj == OBJECT) ? attObj : {};
    att.data = swfUrlStr;
    att.width = widthStr;
    att.height = heightStr;
    var par = (typeof parObj == OBJECT) ? parObj : {};
    if (typeof flashvarsObj == OBJECT) {
     for (var i in flashvarsObj) {
      if (flashvarsObj[i] != Object.prototype[i]) { // Filter out prototype additions from other potential libraries
       if (typeof par.flashvars != UNDEF) {
        par.flashvars += "&" + i + "=" + flashvarsObj[i];
       else {
        par.flashvars = i + "=" + flashvarsObj[i];
    addDomLoadEvent(function() {
     createSWF(att, par, replaceElemIdStr);
     if (att.id == replaceElemIdStr) {
      setVisibility(replaceElemIdStr, true);
   else if (xiSwfUrlStr && !isExpressInstallActive && hasPlayerVersion("6.0.65") && (ua.win || ua.mac)) {
    setVisibility(replaceElemIdStr, false);
    addDomLoadEvent(function() {
     var regObj = {};
     regObj.id = regObj.altContentId = replaceElemIdStr;
     regObj.width = widthStr;
     regObj.height = heightStr;
     regObj.expressInstall = xiSwfUrlStr;
     showExpressInstall(regObj);
getFlashPlayerVersion: function() {
   return { major:ua.pv[0], minor:ua.pv[1], release:ua.pv[2] };
hasFlashPlayerVersion:hasPlayerVersion,
createSWF: function(attObj, parObj, replaceElemIdStr) {
   if (ua.w3cdom && isDomLoaded) {
    return createSWF(attObj, parObj, replaceElemIdStr);
   else {
    return undefined;
createCSS: function(sel, decl) {
   if (ua.w3cdom) {
    createCSS(sel, decl);
addDomLoadEvent:addDomLoadEvent,
addLoadEvent:addLoadEvent,
getQueryParamValue: function(param) {
   var q = doc.location.search || doc.location.hash;
   if (param == null) {
    return q;
    if(q) {
    var pairs = q.substring(1).split("&");
    for (var i = 0; i < pairs.length; i++) {
     if (pairs[i].substring(0, pairs[i].indexOf("=")) == param) {
      return pairs[i].substring((pairs[i].indexOf("=") + 1));
   return "";
// For internal usage only
expressInstallCallback: function() {
   if (isExpressInstallActive && storedAltContent) {
    var obj = getElementById(EXPRESS_INSTALL_ID);
    if (obj) {
     obj.parentNode.replaceChild(storedAltContent, obj);
     if (storedAltContentId) {
      setVisibility(storedAltContentId, true);
      if (ua.ie && ua.win) {
       storedAltContent.style.display = "block";
     storedAltContent = null;
     storedAltContentId = null;
     isExpressInstallActive = false;
Can someone please help! I've looked and tried prety much everything. If you can provide a solution I would GREATLY apreciate it!

There is no Flash player version 15... as in your code:
<param name="swfversion" value="15.0.0.0" />
For some reason Adobe thought it would be a good idea to target a Flash player version (15) as default.....which may be out a couple years in the future. Go figure!!!
If you don't like player version 9, change to 10 or 11.... just not 15 (yet).
Best wishes,
Adninjastrator

Hi, is this the right product for enabling flash contents? I need support for my Harvard e-learnings pls. After downloading Presenter, I get an error message 'Not a valid presenter' when I add the Harvard url. Need help.

Hi
Is there anothe product for enabling flash content.

Pallavi,
Adobe Presenter is a plug-in application to MS PowerPoint that allows you to add video, audio, Flash and quiz content in to a presentation and then author it out as a Flash based presentation that can the be delivered to others via the web. You are asking about enabling Flash content. In what browser/application are you needing to enable Flash Content?
The 'Not a valid presenter' message is most likely due to you not have the rights to author content to Harvard's e-learning system, but without knowing if the URL is for a Connect account or some other e-learning platform, it's hard to give any useful insight.

SCORM (flash Player Content) not working on Windows Server 2012 R2 which has IE11 integrated installed on it.

Hi Everyone,
I have website which contains SCORM package, installed on Windows Server 2012 R2 which has IE11 installed on it.
Flash Player is also embedded with IE.
IE Version: 11.0.9600.17278.
Updated Version: 11.0.12 (KB2977629)
When I launch SCORM (flash Player Content) from my application, it is not working. It just displays a blank page however the Title of IE is set to the text from the SCORM content.
However if I access the same URL from any other machine which has previous version of Windows OS (i.e. previous to Windows 8 OS), it is working as expected on IE9, IE10 and IE11.
While trying to find out the cause, I came across some forum which says we have to install the “Desktop Experience” on the server to enable the inbuilt flash player. After doing that also, My SCORM contents are not getting displayed.
To find out more details, I have uploaded the SCORM Package on SCORM Cloud to check if it is working there. Here again the same problem, it doesn’t work and displays
error message saying that “Member is not found” and when I tried to find out the location of the error then it is coming at
Windows.document.myFlash.setVariable(…) method on the Windows Server 2012 R2 with IE11.
When I performed “Addwatch”, it is saying that Windows.document.myFlash doesn’t have setVariable(…) method.
However if access the same cloud URL from other machine (Having OS previous to Windows 8 OS), it is working as expected.
I have attached the screenshot of the error.
Any help would be appreciated.
Thanks

Hello,
I'd ask the SCORM package provider or in Microsoft's ASP.Net forums:
http://forums.asp.net/
As Microsoft's ASP.Net forums are on a different platform, we cannot move the question for you.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

SharePoint 2010 + RBS.msi does not create tables ("mssqlrbs") at the content DB

Installed on W2K8 SP2 + SQL 2 K 8 R2 CTP November + SPS2010 beta.
SQL instance by default MSSQLSERVER and WSS_Content default content database.
Step by step following installation and use of remote Blob Storage capacity documentation:
http://technet.microsoft.com/en-us/library/ee748631(office.14).aspx
The RBS.msi, at the log file component installation it seems that installation is correct, but displays the error:
... Executing op: ActionStart(Name=FixFilestreamStoreConfig,,)
Información 2769. El instalador ha encontrado un error inesperado. El código de error es 2769. La acción personalizada CreateFilesNoUI no ha cerrado 21 identificadores MSIHANDLE.
... Executing op: CustomActionSchedule(Action=FixFilestreamStoreConfig, ActionType=3070, Source=BinaryData, Target=RepairProvider, CustomActionData=filestream;C:\Program Files\Microsoft SQL Remote Blob Storage10.50\Provider Libraries\Filestream Provider\FilestreamProviderConfiguration.xml)
The content database have not created the necessary tables "mssqlrbs" and running the command in the SharePoint Shell:
$ rbss.Installed () returns "False"
I have not found a walkarround or anything let me to implement tables and simulate the installation that performs the .msi, provided in the Feature Pack for Microsoft ® SQL Server ® 2008 R2 November Community Technology Preview (CTP)
Any help would be appreciated.
Thx
Eva

Hi,
I am getting same error. r.
The
error code is 2769. Custom Action CreateFilesNoUI did not close 21 MSIHANDLEs
Can you please let me know How you resolved this error ?
Thanks in Advance...

Why are my questions blocked with "you may not create or edit content?"

When ever I submit a question, I am told I can not "created or update content" and my query is not accepted. What is going on?

The Apple way or the highway.
Here is my ASC work flow...
1) I login.
2) Start an auto reloader.
Unless you do something every thirty minutes you get logged out. The forum software waits to tell you this as long as it can to keep you in suspense ;-) .
I use Firefox and ReloadEvery.
https://addons.mozilla.org/en-US/firefox/addon/reloadevery/
You need to pick a page that will reload over time without stalling out. It's ASC. I've found my profile display the best to use. I get my Profile page after some logins. It's ASC. Change rccharles to your apple id.
https://discussions.apple.com/people/rccharles?view=discussions
3) I open another window to do my normal ASC browsing.
4) I have a FireFox bookmark to goto the discussions that I have participated in. I've modified it to add on the content stuff.
turingtest2 recommends. Change rccharles to your apple id:
https://discussions.apple.com/people/rccharles/content?filterID=participated~obj ecttype~objecttype%5Bthread%5D
5) Use turingtest2's generated links with the /content suffix as browser bookmark to the ASC discussions:
Site map of Communities and Categories
https://discussions.apple.com/docs/DOC-2463
6) I run with Hiroto's modification to user content. This is the only way these forums are readable for me. How to adjust the format and layout of ASC Web Pages:
https://discussions.apple.com/docs/DOC-7501
7) Read and answer my old posts. I kind of memorize the time I last posted. ( It's way bad that apple eliminated the last poster to a thread. )
8) I use tabbed browsering. From a list of discussions, hold down the command key then click on the link. You get two tabs this way. The original window will keep where you have been.

Error when installing Integration content- Could not create java

Hi all,
when i been installing the integration comp. in a server win 2005 32 bits, the installer give the next error: coul not create java virtual machine.
i try desintaling and installing jvm 1.5 like manual, and i dont know why happens this error.
help please-
is bussines one 8.8 pl 19
regards
Humberto

Humberto,
Try downloading the latest version of the Business One framework for 8.8 or the latest version of B1iSN 8.8 which will load Tomcat 6 and well as Java 6 and see if that helps.
Eddy

XI Content Not working Properly for ISR to Triversity Integration

Hello Everyone,
I am not very sure whether this is the right forum for posting such a technical question, but since the context is basically functional, I am firing away with the question:
We are working on a ISR-XI-Triversity Integration scenario. The standard XI Content available in SMP is used as the basis of integration. But the content seems not to work for certain business scenarios, specifically promotion discount download scenarios. When we define a promotion, activate the prices and fire the Assortment List IDoc (WBBDLD.WBBDLD03), we can see that the desired article and the conditions are present in the IDoc. This IDoc should create the following files after XI Transformation:
1. PLUTXN.ASC - EAN Data
2. XREFTXN.ASC - Article Data
3. PROMOTXN.ASC - Promotion Data
4. NEWPARM.TRG - Trigger File
But after the transformation, the PROMOTXN.ASC file is not created. When we go for analysing the problem, we find that the Value Mapping ERPPriceCondition/ERPPriceConditionSchema to IXRetailPriceType/IXRetailPriceTypeSchema is not functioning; i.e. Even when values are present in the source Agency/Schema, the Traget Agency/Schema is not populated. Do we need to do any specefic configuration for achieving the transformation?
Any ideas?
Thanks and Sincere Regards,
Amitabha

Hi Amitabha,
thank you very much for the details.
As it looks like, the reason of the missing promotion data in SAP POS was the missing listing information in SAP Retail.
Listing is an very important retail process. In assortment list for a store, oonly listed articles will be taken into account.
To list articles, you can do it via MM42 (artaicle mainteance listing view) or the listing transactions (WSP4)
or the easier way for prompotions, start WAK2 or WAK3 and press teh button (subseq. processing) ans select the LISTING button.
If you receive any errors there in listing process, check the artcile master, if the reference logistic views are maintained and can be re-used for listing process.
Regards
Björn

ADF Faces: !-- ERROR: could not create stylesheet for oracle-desktop.xss

Hi,
I'm using ADF Faces EA6. Sometimes when I create the EAR, it doesn't include the file "oracle-desktop-ea6-ie-6-windows.css" which muest be present in the "adf/styles/cache" directory. If I check the source code from the browser, it starts like this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"><html dir="ltr" lang="es-ES">
<head><title>Sistema de Seguridad</title><meta name="generator" content="Oracle ADF Faces"><script type="text/javascript" src="/fmv/adf/jsLibs/Commonea6.js"></script><script type="text/javascript">_defaultTZ()</script></head>
Please note the comment: 
Does somebody know the reason?
TIA,
Brian

If everything is set up properly the css will get generated if it doesn't exist. You do not have to be running in the IDE for the css to be correctly generated. Running the app first is generating the css before you deploy, so you've taken away the symptom but not solved the problem. If you try running on another browser, for example, you'll probably run into the same problem.
Does your ear get unzipped when you deploy? Do you have a writable file system for the css to get written to? There is a known issue with WebLogic where it doesn't expand the EAR.
Please check to see if there are errors in the logs.

Is it possible to maintain versioning of portal contents edited/created ?

Have few doubts about weblogic portal 9.2
1]Is it possible to maintain versioning of portal contents edited/created?
2]Can portal presentation mechanism hide selected output fields?
3]How will Presentation service support storage of view state in a repository?

Mr.Raja
As far as my knowledge, it does NOT make sense to assign a material to more than one class type.
We can assign many classes to a single class type of a material.
For configurable material, create the material using material type : KMAT.
& then, activate the 'batch management" control in the material master, for that material.
Pls revert with feedback.
Hope, that helps you.
Rgds
Sumanth.Gururaj
Consultant/Systems Analyst - SAP SD/MM

Do our users have to install Flash player to see our scorm content?

I am currently creating a scorm content using Captivate 5.5 within Moodle.
My question is do our users have to pre-install Flash player to see our scorm module?
If so, is there any way we can avoid it?
One idea that I thought of is to install flash player on a moodle server.
Is it possible to do so, or this is something that I do not need to worry about?
Sami

Hi Sami,
I think, It's hard to find any user who might not have Flash Player already install on their browser.
Google Chrome has it inbuilt and most of the browser they get installed as a plug-in.
Not just for your course, every user would need Flash Player that for view several websites (say YouTube )and failing that they wont be able to see Flash enabled content.
I would suggest that do not worry about the Flash plugin as almost all users would have it already.
With Captivate 6, you also have an option of using HTML 5 as published output not just flash!
Thanks,
Anjaneai

Scorm Content Not Created in Presenter

Similar Messages

Maybe you are looking for