Scot configuration for SMTP

Hi all,
I wolud like to know the configuration steps need to do in the SCOT transaction inorder to send the mails from SAP system to othermail servers via SMTP.
Your help would be more appreciable
Many thanks in advance
rk.

Hi RKK,
e-mail, fax or paging/SMS via SMTP configured in the SAP Web Application Server & Which prerequisites and settings are required outside the SAP system?
Brodly there are five steps to configure
1. Profile parameters
2.User administration (transaction SU01)
3. Client assignment (transaction SICF)
4.SAPconnect administration (transaction SCOT)
5. Settings on the mail server (SAP-external configuration)
For step by step visit smtp configuration guide at
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm.
Cheers,
Shyam.

Similar Messages

SCOT configuration for internal & external email system in EP.

Hi,
I want to add SCOT configuration for internal & external email system in SAP EP 7.0 ?
What all steps I need to do ? any good documents on this ?

Hi Haider,
I have read the link you have given me to configure SCOT. I have 3 doubt plzz clarify.
Doubt No. 1:
In that link its mentioned that I have to add 2 profile parameter in the transaction RZ10 namely icm/server_port_<>* and is/SMTP/virt_host_<>*
My question is Can I put any value which i like in place of * like can I add either icm/server_port_2 OR icm/server_port_3 OR icm/server_port_4 in icm parameter AND ALSO
Can I put any value which i like in place of * in is/SMTP/virt parameter like can I add either is/SMTP/virt_host_0 OR is/SMTP/virt_host_1 OR is/SMTP/virt_host_2 .
Doubt No. 2:
What port value I have to put in the profile parameter    icm/server_port_2 in RZ10. Can I put any port value ? and automatically that port will work? say suppose I addded this profile parameter in RZ10
icm/server_port_2 = PROT=SMTP,PORT=25000,TIMEOUT=180          so automatically 25000 port will work ? or will it give error?
Doubt No. 3:
When I go to SMICM transaction and go to services , I get the following:
No. Log         Service name/port     Host name           Keep Alive    Proc TimeOut   Active
1     HTTP               8000                  epv.sopm.com           30                     60               Yes
2     SMTP               0                       epv.sopm.com            30                    60                Yes
3     HTTPS             8001                 epv.sopm.com            30                    180               Yes
This means that HTTP port is 8000,   HTTPS port is 8001. My question is why in SMTP its showing 0, why no port is shown?
I have not added any profile parameter like icm/server_port_2 = PROT=SMTP,PORT=25000,TIMEOUT=180     for SMTP in RZ10 as of now.
Is this the reason for this ?

SCOT Configuration for output format XLS in ECC6

Dear All,
Currently the ECC6 that I'm trying to configure the SCOT does not have a XLS format for Abap List, so I couldn't proceed with it.
Since the ECC6 only have standard output format. (HTM , PCL , PDF , TXT)
Is there anyway to add the output format for the XLS output format for SCOT configuration.
Thanks & Best Regards,
Rahim.

Hi,
Please refer SAP note 1151258.
Thanks
Sunny

Scot configuration for 4.6c systems

Hi All,
After having worked on Ecc 6 systems i am having problems understanding confog for 4.6c systems for SCOT for out bound mails.
We have a requirement where we need to change the mailhost name.In Ecc we just need to change in scot but whereas in 4.6c how do we change it.Thanks.

Hi Ambarish,
You do not configure the mail host in SAPconnect or the IMG but rather in Sendmail or the "other" mail software you will be using. SMTP was not available in releases before 6.10 as the ICM was not available. I will explain the flow of a request below:-
SAPConnect -> RFC -> Internet Mail Gateway -> Sendmail (or Sendmail equivalent) -> SMTP Mail Server
As you can see you do not enter the mail host and listening port of the SMTP server as Sendmail is the actual SMTP server. The mail is not relayed via SMTP but RFC from the SAP system and SMTP mail is forwarded from Sendmail. Note that Sendmail is a fully functioning mail server ! This method was not perfect but worked with some configuration.
Below is a "how to" that will enable you to setup mail routing from 4.6C to Exchange and all you have to do is enable Exchange to accept mails from the Sendmail clone (Emailrelay).
http://it.toolbox.com/wiki/index.php/Email_from_SAP_-_4.6C_using_MS_Exchange_2003
Using this method it is possible to send mails from 4.6C to Exchange via a hop via another SMTP server
Hope this helps
Michael

SCOT Configuration--for external mail

Hi All,
I am trying to configure SCOT on my solution manager server. and able to send mail inside comapny mail domain but not able to send mail on any external mail domain like yahoo,hotmail.gmail.
we are using MS exchange server for mailing. please advice me if any further setting require on Mail server side.
Thank
Gyan

Hi,
Yes this is because your SMTP email server does allow sending emails to the outsid world.
If you are using SAP WAS 6.10 or above you do not need any extra configuration you need only to follow the following steps:
https://service.sap.com/sap/support/notes/455140
This is because the SMTPplug-in from WAS 6.10 and onwards - supports all SMTP mail gateways and you do not need any SAP Exchange Connector as well to connect to MS Exchange Servers. Please find below the details from SAP as well:
https://service.sap.com/sap/support/notes/122657
if you have followed all the steps as mentioned in sap note 455140 above, please liaise with your M/S Exchange Server administrator so that he can unblock the sending of emails to the outside world as well, if that is permitted.
- Regards, Dibya

Save SCOT configuracion for SMTP in transport request

Hello,
I have just configured the SCOT/RZ10 transactions to enable DEV server to send emails using an external SMTP server. Now I want to transport such settings into QAS and PROD servers. Is it posible to include such configuration in a transport request?
Thanks and regards.
Federico

Hello Federico,
Can u tell me the step by step to send emails using an external SMTP server.
Regards

Mac OS X - Proper postfix configuration for SMTP

I am trying to use the built-in Mac SMTP service to allow emails to be sent from localhost, but something is not quite set up correctly. What are the correct entries to put into the postfix main.cf file? This is what I have in it right now: ### MAMP Postfix Configuration - Start ###
myorigin = comcast.net
myhostname = mailer.$myorigin
smtpd_sender_restrictions = permit_inet_interfaces
# smart host
relayhost = smtp.comcast.net
smtp_sasl_auth_enable = yes
smtp_sasl_password_maps = hash:/etc/postfix/sasl_MAMP_passwd
smtp_sasl_security_options = noanonymous Can anyone see what is wrong with this?

After taking a break from this topic for a while, I FINALLY found the combination of settings that allow me to route emails through Comcast SMTP servers. The settings are as follows: In /etc/postfix/main.cf, put:  # Comcast settings
relayhost = [smtp.comcast.net]:587
smtp_sasl_auth_enable = yes
smtp_sasl_password_maps = hash:/etc/postfix/saslpass
smtp_sasl_security_options = noanonymous (note: MUST put square brackets around SMTP server in relayhost entry)  In /etc/postfix/saslpass, put: smtp.comcast.net [email protected]:password In /etc/postfix/transport, put: # Comcast settings
* :[smtp.comcast.net]  At terminal prompt, type the following commands: postmap hash:transport
postmap hash:saslpass
postfix reload Test system by using following from terminal: telnet localhost 25
ehlo testmail.org
mail from:<[email protected]>
rcpt to:<[email protected]>
data
This is a test email.
quit If you get a message like: 250 2.0.0 Ok: queued as B746E283BE2A Then postfix has accepted the request Check /var/log/mail.log for something like: Oct 23 13:00:18 Michael-Sheavers-iMac postfix/smtpd[1554]: connect from localhost[127.0.0.1]
Oct 23 13:01:40 Michael-Sheavers-iMac postfix/smtpd[1554]: B746E283BE2A: client=localhost[127.0.0.1]
Oct 23 13:02:03 Michael-Sheavers-iMac postfix/cleanup[1556]: B746E283BE2A: message-id=<[email protected]>
Oct 23 13:02:03 Michael-Sheavers-iMac postfix/qmgr[1489]: B746E283BE2A: from=<[email protected]>, size=369, nrcpt=1 (queue active)
Oct 23 13:02:05 Michael-Sheavers-iMac postfix/smtp[1557]: B746E283BE2A: to=<[email protected]>, relay=smtp.comcast.net[76.96.30.117]:587, delay=56, delays=55/0.01/1.1/0.51, dsn=2.0.0, status=sent (250 2.0.0 oK0z1h00L2wgXwz01K10kE mail accepted for delivery)
Oct 23 13:02:05 Michael-Sheavers-iMac postfix/qmgr[1489]: B746E283BE2A: removed
Oct 23 13:02:09 Michael-Sheavers-iMac postfix/smtpd[1554]: disconnect from localhost[127.0.0.1]
Oct 23 13:15:12 Michael-Sheavers-iMac postfix/qmgr[1489]: C61D7283BD47: from=<[email protected]>, size=355, nrcpt=1 (queue active)
Oct 23 13:15:12 Michael-Sheavers-iMac postfix/smtp[1575]: C61D7283BD47: to=<[email protected]>, relay=smtp.comcast.net[76.96.30.117]:587, delay=2778, delays=2777/0.02/0.37/0.26, dsn=2.0.0, status=sent (250 2.0.0 oKEt1h00o2wgXwz8jKEuWR mail accepted for delivery)
Oct 23 13:15:12 Michael-Sheavers-iMac postfix/qmgr[1489]: C61D7283BD47: removed If you see "mail accepted for delivery", then your message has successfully gone through. It feels so good to have finally found a solution to tis perplexing issue!

Unable to configure Mail setup for SMTP : Please Help

Hi experts,
             I have been trying since 2 weeks with most of the links like help.sap.com, and other links which experts are sugested, but then also I am uable to configure the mail setup for a SMTP server from SAP R/3 4.7EE.
          Couls anyone help me please,
Challenge: I want to send mails from SAP system to other internet servers or mail servers.
                SMTP server is installed,
                 SAP R/3 4.7ee is in place.
I request you experts please provide the exact step by step procedure to configure, so that I should not run behind the links.
Thanks in advance,
Sunil

Hi Juan, Hi Juan,
             Thanks for your reply, I am happy that one big hope has come. regarding my issue its starts from the SCOT configuration, I have created the Node, and under support address types selected INTERNET type.
Under INTERNET settings
address area = *mail
have not mentiond RFC destination.
Hope this info will guide you my issue.
Thanks in advance,
Sunil

SAP SMTP Configuration for Microsoft Exchange Online (Microsoft Hosted Solution for Exchange - Office365)

Dear All,
We are using Microsoft Exchange Online (Microsoft Hosted Solution for Exchange – Office 365) for sending and receiving emails. Now we want to setup SAP SMTP so that emails / notifications can be sending through SAP via Microsoft Exchange Online. It is quite easy to configure for setting SMTP Services for locally hosted Exchange Server. But this is the first time I am trying to setup for Microsoft Exchange Online.
Current Instance Profile settings are as follows;
is/SMTP/virt_host_1                         *:25000
is/SMTP/virt_host_0                         *:*
icm/server_port_2 PROT=HTTPS,PORT=44300,PROCTIMEOUT=300,TIMEOUT=600
icm/server_port_1                           PROT=SMTP, PORT=1080, TIMEOUT=180
icm/server_port_0 PROT=HTTP,PORT=8000,PROCTIMEOUT=300,TIMEOUT=600
ms/server_port_0                            PROT=HTTP,PORT=81$$
SCOT Settings are
Mail Host             smtp.office365.com
Mail Port              587
Following are the settings for configuring Outlook for Exchange Online – Office 365;
Server name
Port
Encryption method
POP3
outlook.office365.com
995
SSL
IMAP4
outlook.office365.com
993
SSL
SMTP
smtp.office365.com
587
TLS
Please assist if any one configure office365 with SAP.

Hello Majid,
Were you able to setup SCOT for Office365 online, I have to setup same.
Can you help with some guidelines on how you setup.?
Regards,
Ashish

How to configure Symantec Mail Security for SMTP & Messaging Server 6.3

Hi!
I want to install a Symantec Mail Security for SMTP 5.0.1(host1) with Messaging Server 6.3 (in production - host2), but when I try to access to POP protocol to send a message from Internet, the system display a message with a relay problem.
- Could you help me with this issue?,
- Do you know some documentation that speaks of this?. I can't find any documentation that explain how to configure and integrate SMS and Messaging Server. Thanks in advance.
Regards, CR

ctemp1 wrote:
I want to install a Symantec Mail Security for SMTP 5.0.1(host1) with Messaging Server 6.3 (in production - host2), but when I try to access to POP protocol to send a message from Internet, the system display a message with a relay problem.I take it that you have configured the symantec software like this?
internet -> symantec mail security system -> sun messaging server -> recipientA better approach is the following
internet -> sun messaging server -> recipient
                          |
                         V
              symantec mail security system(refer here: http://blogs.sun.com/factotum/entry/messaging_server_correctly_deploying_the)
- Do you know some documentation that speaks of this?. I can't find any documentation that explain how to configure and integrate SMS and Messaging Server. Thanks in advance.There is no documentation specifically for symantec software but we do document how to send emails via the symantec mail security server using the aliasdetourhost channel keyword:
http://docs.sun.com/app/docs/doc/819-4428/6n6j42615?a=view#bgaqy
Regards,
Shane.

SMTP Configuration for GP

Hi All
I have to configure the SMTP settings in GP for mail trigger. I have the SMTP server IP and port details with me and have configured the same in the Portal->GP->Administration->Adminster BMF->Clients
I have followed the suggestions given in the following Link:[Re: Guided Procedures - set mail smtp host
But my problem is that when i use the following path : Guided Procedures -> Administration -> GP Configuration Tool -> Interactive Forms to configure the settings and click in Save after creating the communication settings, I get the following error:
com.sap.caf.eu.gp.base.exception.IllegalArgumentException: Input parameter: value has invalid value: null
     at com.sap.caf.eu.gp.model.forms.exceptionhandling.ExceptionHandler.throwIllegalArgumentException(ExceptionHandler.java:86)
     at com.sap.caf.eu.gp.model.forms.conf.ConfigAccessor.setProperty(ConfigAccessor.java:112)
     at com.sap.caf.eu.gp.model.svc.impl.ConfigurationManager.saveFormsEndpoint(ConfigurationManager.java:354)
     at com.sap.caf.eu.gp.model.svc.impl.ConfigurationManager.saveNonJ2EEConfigParams(ConfigurationManager.java:227)
     at com.sap.caf.eu.gp.model.svc.impl.ConfigurationManager.saveSzenario(ConfigurationManager.java:197)
     at com.sap.caf.eu.gp.model.svc.impl.ConfigurationManager.saveConfigurationSzenario(ConfigurationManager.java:179)
     at com.sap.caf.eu.gp.ui.conf.iforms.CInteractiveForms.save(CInteractiveForms.java:471)
     at com.sap.caf.eu.gp.ui.conf.iforms.wdp.InternalCInteractiveForms.save(InternalCInteractiveForms.java:215)
     at com.sap.caf.eu.gp.ui.conf.iforms.CInteractiveFormsInterface.save(CInteractiveFormsInterface.java:186)
     at com.sap.caf.eu.gp.ui.conf.iforms.wdp.InternalCInteractiveFormsInterface.wdInvokeMethod(InternalCInteractiveFormsInterface.java:196)
     at com.sap.tc.webdynpro.progmodel.generation.ExternalControllerPI$ExternalInterface.invoke(ExternalControllerPI.java:291)
     at $Proxy1581_10000.save(Unknown Source)
     at com.sap.caf.eu.gp.ui.gpconf.app.CConfigApp.saveWizard(CConfigApp.java:317)
     at com.sap.caf.eu.gp.ui.gpconf.app.wdp.InternalCConfigApp.saveWizard(InternalCConfigApp.java:158)
     at com.sap.caf.eu.gp.ui.gpconf.app.VConfigApp.onActionSave(VConfigApp.java:430)
     at com.sap.caf.eu.gp.ui.gpconf.app.wdp.InternalVConfigApp.wdInvokeEventHandler(InternalVConfigApp.java:247)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:131)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:72)
     at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.doHandleActionEvent(ProcessingEventPhase.java:156)
     at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.execute(ProcessingEventPhase.java:91)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequestPartly(WindowPhaseModel.java:161)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doProcessRequest(WindowPhaseModel.java:109)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:96)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:469)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:52)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doExecute(ClientApplication.java:1388)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doProcessing(ClientApplication.java:1208)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToApplicationDoProcessing(AbstractExecutionContextDispatcher.java:145)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForAppProcessing.doService(DispatchHandlerForAppProcessing.java:35)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:116)
     at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:93)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToApplicationDoProcessing(ExecutionContextDispatcher.java:114)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:80)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:506)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:526)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessingStandalone(ApplicationSession.java:457)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:248)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:698)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:230)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:228)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:192)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.doService(DispatchHandlerForRequestManager.java:38)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:116)
     at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:93)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToRequestManager(ExecutionContextDispatcher.java:140)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:92)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:104)
     at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
     at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doPost(AbstractDispatcherServlet.java:61)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
     at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
     at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Can anyone tell me, what's exactly is to be filled in the Create Communication Settings pop-up form...??
Please guide me.
Regards
Deepak

Hi Kevin
Thanks for the reply.
Yeah, i found the tool. Since i do not have access to the Config Tool (which is offline based), i accessed the same property using the /nwa/sys-config and then selecting the "Services" tab and accessing the property as said by you.
I could indeed see the property but was unable to modify it. After going through a bit around, there's a message in NWA portal stating that properties can be edited only with the Config Tool and not online.
Is it really this case or is there any workaround..?? Actually, am at a remote location and do not have access to the system local path and hence cannot access Config Tool.
Regards
Deepak

Scot configuration...Smtp

Hi friends,
there are 2 clients in our system in one of the client scot is configured and is working fine....
Now we need to configure the scot in the another client in the same system.. will this gona effect the previous client if not what all the steps need to be done to complete this configuration... smtp configuration..
please help me out in configuring smtp ..send me some blogs or documents
Regards
Vijay

Dera Vijay,
Yes you got to configure the same in new client on the same server as SCOT configuration is client independent
Back to SCOT, the configuration of the SMTP should look like:
Mail Host: the Exchange server domain name (FQDN)
Mail port: 25
Code Page: what ever you need (like 4110 unicode UTF8)
in the supported address choose Internet then click on the SET button and include your company address like:@XXX.ac.in:)
In the SAP's user manager (SU01) the user need an email address to be able to send emails.
Regards,
Ashutosh

CCMS Monitor for SMTP-Service via ICM SMTP-Plugin

Dear all,
we configured our SAP System for sending emails with the help of transaction SCOT. We are using the SMTP-Plugin brought in by the ICM. Everything works fine. Now we want to report how many emails are sent through that connection. For that we want to connect the SMTP-Plugin to the CCMS. Since I havn't found any documentation of that (the existing documentation is discussing how to configure an ordinary SCOT connection for CCMS), I'd like to ask somebody for help.
thanks in advance
best regards
Thomas Wetzler

http://www.spamhaus.org says:
Mail servers only run spam filters such as Spamhaus PBL on port 25, so if you find you are being blocked by the PBL when you try to send mail to your mail server that means you are not communicating with the mail server on the 'authenticated' port 587 but you're still on port 25. This means your 'SMTP Authentication' is not working correctly.
http://wiki.gandi.net/en/mail/standard-settings#smtp-account says:
SMTP Account
Name server : mail.gandi.net
Port : 25, 465 (with SSL) or 587 (try one or the other)
TLS or SSL: yes
SMTP Authentication : yes, using the same settings as for the POP / IMAP account
I was trying to use the same settings I have used for several years with Thunderbird and Apple Mail, ie SSL on port 465.
Is there something wrong with my settings which could be preventing mailx from using port 465?
A few debug tips would be appreciated.
Your link causes me to ask: Does the mailx on Leopard support SMTP directly?

RE: SCOT configuration

Hi,
When i am trying to send a mail from SAP to external mail id (say gmail id) i am getting the following error message
No delivery to [email protected], as recipient unknown
Message no. XS802
Diagnosis
The message from the node could not be delivered to recipient as the recipient is unknown.
System Response
Processing was ended normally.
Additional information of the node used (in the system language of the node):
550 5.7.1 Unable to relay for
Procedure
Check the recipient address, correct if necessary and send the message to the correct address.
If the node is an SAP system, the address is not contained in address management or SAPoffice exception management. In this case, you should maintain the address here.
If the node is not an SAP system, you must maintain the address in the appropriate system.
Please help me solve this problem
Regards,
Sowmya

Hi Soumya,
Please check the note 455140 for solving any of the SCOT configuration problem.
This is a very simple and clear cut note.
In your case: Check whether mail Address is specified in SU01 for the recepient user.
2. Node in use is checked in SMTP.
Hope this definitely solves your problem.
Cheers !!!
Satish Kumar.
Note: Reward Points if Useful.

How to configure the smtp server..

i had an error when running the java mail program..
this is my program
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import java.io.*;
import java.util.Properties;
public class MailClient
public void sendMail(String mailServer, String from, String to,
String subject, String messageBody,
String[] attachments) throws
MessagingException, AddressException
// Setup mail server
Properties props = System.getProperties();
props.put("mail.smtp.host", mailServer);
// Get a mail session
Session session = Session.getDefaultInstance(props, null);
// Define a new mail message
Message message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject(subject);
// Create a message part to represent the body text
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText(messageBody);
//use a MimeMultipart as we need to handle the file attachments
Multipart multipart = new MimeMultipart();
//add the message body to the mime message
multipart.addBodyPart(messageBodyPart);
// add any file attachments to the message
// addAtachments(attachments, multipart);
// Put all message parts in the message
message.setContent(multipart);
// Send the message
Transport.send(message);
protected void addAtachments(String[] attachments, Multipart multipart)
throws MessagingException, AddressException
for(int i = 0; i<= attachments.length -1; i++)
String filename = attachments;
MimeBodyPart attachmentBodyPart = new MimeBodyPart();
//use a JAF FileDataSource as it does MIME type detection
DataSource source = new FileDataSource(filename);
attachmentBodyPart.setDataHandler(new DataHandler(source));
//assume that the filename you want to send is the same as the
//actual file name - could alter this to remove the file path
attachmentBodyPart.setFileName(filename);
//add the attachment
multipart.addBodyPart(attachmentBodyPart);
public static void main(String[] args)
try
MailClient client = new MailClient();
String server="smtp.canvasindia.com";
String from="[email protected]";
String to = "[email protected]";
String subject="Test";
String message="Testing";
String[] filenames ={"c:/A.java"};
client.sendMail(server,from,to,subject,message,filenames);
catch(Exception e)
e.printStackTrace(System.out);
the error is .................
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected from p
ool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1196)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:584)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at MailClient.sendMail(MailClient.java:47)
at MailClient.main(MailClient.java:84)
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected fro
m pool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1047)
... 5 more
how to configure the smtp server in my machine..
please guide me...

This uses gmail account, and gmail smtp
* MailSender.java
* Created on 14 November 2006, 17:07
* This class is used to send mails to other users
package jmailer;
* @author Abubakar Gurnah
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
public class MailSender{
    private String d_email,d_password;
     * This example is for gmail, you can use any smtp server
     * @param d_email --> your gmail account e.g. [email protected]
     * @param d_password --> your gmail password
     * @param d_host --> smtp.gmail.com
     * @param d_port --> 465
     * @param m_to --> [email protected]
     * @param m_subject --> Subject of the message
     * @param m_text --> The main message body
    public String send(String d_email,String d_password,String d_host,String d_port,
            String m_from,String m_to,String m_subject,String m_text ) {
        this.d_email=d_email;
        this.d_password=d_password;
        Properties props = new Properties();
        props.put("mail.smtp.user", d_email);
        props.put("mail.smtp.host", d_host);
        props.put("mail.smtp.port", d_port);
        props.put("mail.smtp.starttls.enable","true");
        props.put("mail.smtp.auth", "true");
        //props.put("mail.smtp.debug", "true");
        props.put("mail.smtp.socketFactory.port", d_port);
        props.put("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
        props.put("mail.smtp.socketFactory.fallback", "false");
        SecurityManager security = System.getSecurityManager();
        try {
            Authenticator auth = new SMTPAuthenticator();
            Session session = Session.getInstance(props, auth);
            //session.setDebug(true);
            MimeMessage msg = new MimeMessage(session);
            msg.setText(m_text);
            msg.setSubject(m_subject);
            msg.setFrom(new InternetAddress(m_from));
            msg.addRecipient(Message.RecipientType.TO, new InternetAddress(m_to));
            Transport.send(msg);
            return "Successful";
        } catch (Exception mex) {
            mex.printStackTrace();
        return "Fail";
    //public static void main(String[] args) {
    //    MailSender blah = new MailSender();
    private class SMTPAuthenticator extends javax.mail.Authenticator {
        public PasswordAuthentication getPasswordAuthentication() {
            return new PasswordAuthentication(d_email, d_password);
}

Scot configuration for SMTP

Similar Messages

Maybe you are looking for