SCOT - Inbound Configuration

Dear Guru's,
We have configured SCOT in our system and its working fine while sending mails SAP id to SAP id, SAP id to External id and also if I send a mail from SAP Id to SAP Id it will have a copy at outlook box also.
But our issue was if I reply for the mail from outlook it will reach to outlook and not to SAP id. Could anyone guide me on this.
regards,
Guna

Theres plenty of information about this... please do some research before posting.
Read the "Rules of Engagament"
Regards
Juan

Similar Messages

Settings reqd in TCode SCOT to configure SMTP

Hi,
I am in the process of configuring SMTP. I have done all the ICM settings and settings in TCode SICF.
This is an external SMTP server and to be able to use it as a smtp server there is master username and password. For this case in SCOT do I have to use the default SMTP node or create a new node of type RFC?
Can any one please guide me further configuration steps.
Thank you,
sam

Hi,
Note 455140 - Configuration E-mail, fax, paging/SMS via SMTP
1. System user
In each client of an SAP system, a system user must be created to process the incoming messages. To do this, use transaction SU01 to create a user of the type "system" and assign the "S_A.SCON" profile to this user.
2. In transaction SU01, enter the Internet mail address of a user in the "E-Mail" field under "Address".
3. Client assignment (transaction SICF)
a. In the Logon data (SAPconnect) Provide the client and the user created.
b. Activate the node SAPconnect.
4. SCOT
a. Use the default SMTP node.
b. check the check box (Node in use) in "General Information".
c. Provide the Mail host in "SMTP Connection".
d. click on internet in "Support Address types".
e. provide a * in "Address area".
f. For "Output Formats for SAP Documents" the following is recommended:
   SAPscript / Smart Forms       PDF
   ABAP List                            HTM
   Business Object / Link          HTM
   RAW Text                             TXT
5. Default domain in SCOT.
The domain of this SAP system client is defined here, for example, crm-prod.company.com. It is used for the following purposes: The SMTP plug-in logs on to the mail server with the domain as ID. The message ID of outgoing mails is compiled with this domain. If an SAP user who has not entered an Internet mail address in their user master record sends an e-mail, a sender address is generated from the SAP user name and this domain, for example [email protected].
In Menu
settings --> Default Domain.
e.g crm-prod.company.com
6. Send job
E-mails that are sent from an SAP application are merely put into a queue. A periodically running background process, the SAPconnect send job, takes the e-mails from the queue and sends them via the Internet. This job can be scheduled from SAPconnect administration as follows:
"View" --> "Jobs". Check whether a job is already scheduled (displayed as a calendar icon).
Choose "Job" --> "Create", and specify a job name.
Place the cursor on the "SAP&CONNECTALL" variant and choose "Schedule Job".
Choose "Schedule periodically".
Specify a time interval (for example 10 minutes) and choose "Create".
Thanks,
Tanuj

SCOT- FAX configuration

How to configure to send FAX from SAP?.
Is it possible to send without having smtp server?
Is it reuired to use any specific FAX server software or any fax software can be triggered from SCOT?.
Thanks
sukhdev

Hello sukhdev,
It is possible to send thru external servers without using SMTP plugin as depicted in the diagram here:
http://help.sap.com/saphelp_nw70/helpdata/EN/42/ea000fb4b31a71e10000000a422035/frameset.htm
this can be done via some configuration settings, check out the process here:
http://help.sap.com/saphelp_nw70/helpdata/EN/2b/d9260b4b8a11d1894c0000e8323c4f/frameset.htm
Regards,
Siddhesh

SCOT email configuration

I configured SCOT for sending mail from SAP ..can anybody me tell how to test it out whether its working(sending mails) correctly or not
Any test method?

I am facing the similar problem. Here my requirement is i need to send email's from SAP to external address like gmail,yahoomail etc. iam able to send emails to Lotus notes which is configured in our company.
I have tried doing like this :
1)SCOT>utilities>Routing test-->Enter the recepient address and recepient type(eg:-INT).
Then click on ROUTES-->explain.
It should give three green colour icons.
I get all the three colurs. But when iam trying to send a new message through SO01 iam getting the following error :
Internal error: SO_OBJECT_MIME_GET Exception: 2. i have changed the respective userid with yahoomail address.
Immediate reply will be really apprecaited.
Thanks in advance

XI Adapter inbound (Configuration)

Hi,
I have followed the steps given here:
http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
But i am unable to post a message to the backend system via an inbound ABAP proxy.
Can you please let me know what should I populate in each of the adapter specific parameters?
Regards,
Ravi

Sorry for not providing enough details.
Here is an excerpt of SXMB_MONI error msg:
td><h1>Service cannot be reached</h1><br><h2>What has happened?</h2><p>URL http://MAGTERP:8000/sap/xi/engine call was terminated because the corresponding service is not available.</p></td></tr><tr><td> </td></tr><tr><td class="emphasize"><strong>Note</strong><br><ul><li> The termination occurred in system ECD with error code <b>403</b> and for the reason <b>Forbidden</b>. </li><li> The selected virtual host was 0 . </li></ul></td></tr><tr><td> </td></tr><tr><td><p><h2>What can I do?</h2><ul><li> Please select a valid URL. </li><li> If you do not yet have a user ID, contact your system administrator. </li></ul></ul><br/><p class="note">ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:magterp_ECD_00-v:0-s:403-r:Forbidden</p><br/><p>HTTP 403 - Forbidden<br><p>Your SAP Internet Communication Framework Team</p></td></tr></table></body></html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 403 with the description Forbidden Error while sending by HTTP (error code: 403, error text: Forbidden)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
@Michal: I do not see any field to give in the HTTP Destination.
I have chosen the addressing type as URL.
target host as the host name for the backend system.
service number: HTTP POrt for backend system.
path: /sap/xi/engine?type=entry : Is this correct?
Authentication Data:
Username and pwd have been provided
the correct client number is given.
My only doubt is whether I have given the PATH correctly.
Or am I missing something very basic here?
Regards,
Ravi

Scot configuration...Smtp

Hi friends,
there are 2 clients in our system in one of the client scot is configured and is working fine....
Now we need to configure the scot in the another client in the same system.. will this gona effect the previous client if not what all the steps need to be done to complete this configuration... smtp configuration..
please help me out in configuring smtp ..send me some blogs or documents
Regards
Vijay

Dera Vijay,
Yes you got to configure the same in new client on the same server as SCOT configuration is client independent
Back to SCOT, the configuration of the SMTP should look like:
Mail Host: the Exchange server domain name (FQDN)
Mail port: 25
Code Page: what ever you need (like 4110 unicode UTF8)
in the supported address choose Internet then click on the SET button and include your company address like:@XXX.ac.in:)
In the SAP's user manager (SU01) the user need an email address to be able to send emails.
Regards,
Ashutosh

E-Mail Inbound - reply is not linked to Service Request

Hi all,
we set up the E-Mail Inbound according to this guide E-MAIL INBOUND CONFIGURATION- ALM: Incident Management - SAP IT Service Management on SAP Solution Manager - SCN Wiki
The only difference to the Settings of the guide is that we maintained it for the ZMRQ. If we send an E-Mail to the System, then automatically a service request will be created. E.g. In the status "Customer Action" the requester gets an E-Mail with a tracking ID and can reply. But now we are facing a problem, the mail is not linked to the already existing ZMRQ and according to the rule policy again a new ZMRQ is created.
So we tried in addition to the mentioned guide above also this How to set up Threading in ERMS - CRM - SCN Wiki , this linked the ZMRQ to the mail. I am wondering a bit, because I know other systems with working inbound functionality and they are not set-up as in the Threading guide. Furthermore some other issues still exists after the reply the Status of the ticket is not automatically set to "in process", the text fields are not copied etc.
Now I removed the settings from How to set up Threading in ERMS - CRM - SCN Wiki again, because I think the reason is something else...
Does anyone know where the tracking ID of the incoming mail is checked? Does this take place in the workflow? I am thankful for every advice!
Regards
Katja

renstarr,
I don't own the items purchased anymore...
For new Apple ID iTunes says something like "This Apple ID has not been used with iTunes yet" and asks me for the credit card details etc
For testing puproses I've deleted one of the purchased application from my device and iTunes claims that I need to buy it again....

AS2 after change of certificate no inbound communication

Dear all,
the AS2 certifcate nearly ended, so we installed a new one. We send the public certificate to our customer. He installed the certificate, but the inbound communication is not working yet. The outbound communication is working.
The error messages from AS2 are:
Error in unkown channel: Alert triggered. 403 - com.seeburger.as2.exception.AS2PluginException: Failed to get inbound configuration from DATABASE. [7/27/10 8:55 AM]
Error in unkown channel: (No session available) >> Error type: COMMUNICATION_ERROR >> Error date: 7/27/10 8:55 AM >> Description: 403 - com.seeburger.as2.exception.AS2PluginException: Failed to get inbound configuration from DATABASE. [7/27/10 8:55 AM]
Error in unkown channel: (No session available) >> Error type: LOGICAL_ERROR >> Error date: 7/27/10 8:55 AM >> Description: Inbound communication from 5010793000014 to 4046423000001 not allowed: com.seeburger.as2.exception.AS2PluginException: Failed to get inbound configuration from DATABASE. [7/27/10 8:55 AM]
Can you help me on this issue. It is the first time we changed the certificate. The communication was working well with the old certificate. Is anything on our side missing?
Thanks and best regards
Frank

Hi Ravi,
This is really a useful information.
We have received a certificate file from our partner as you have mentioned.
I am in contact with BASIS colleague and trying if he could do it.
I would update the thread once it is resolved.
Thanks.
Best Regards,
Shweta

EMail ID field in transaction SU01and SCOT

Hello,
I would like to know what is relevance of "EMail ID field in transaction SU01" in sending/receiving mails.
(SCOT is configured for SMTP Mail exchange.)
Regards,
Nirav Shah.

Hi,
As I mentioned earlier if You assign email address in su01 then system will consider it as your email id and used it while sending or receving the mail.
e.g if you want to send email to <xyz>@<abc.com> and you have mentioned email id in su01 as <pqr>@<ccc.com> then system will send the email to <xyz>@<abc.com> in which from address is <pqr>@<ccc.com>
But if you do not mentioned the <pqr>@<ccc.com> and you have defined default domain "comp.com" and your user name is "hello" then system send the email to <xyz>@<abc.com> in which from address is <hello>@<comp.com>
Please email address after removing <>, as it is restricted to write any email address in the forum.
I hope you got your answer

Regarding ( ALE-BAPI ) Configuration

Hello all............
Iam working on ALE & EDI for some time.
In the Distribution Model View ( BD64 ) there is a option <b>'ADD BAPI'</b>.
I have gone through the documentation regarding this issue but could not get the exact break through which I was looking for.
Can anyone give me the exact steps for configuration to be followed right from creation of PORTS for Outbound & Inbound configuration of Purchase Orders using <b>ADD BAPI</b>.
Thanks in advance,
Ajay.

Hi Ajay,
The distribution model is used in ALE scenarios, which is basically master data replication. For transaction data like Purchase Orders there is no need to maintain the distribution model. Just maintain the partner profiles (WE20)!
Regards,
John.

ALE Inbound Cofiguration Steps needed

Hi friends,
kindly send me ALE Inbound Configuration Steps with all the Mandatory settings that need to be done
Thanks in Advance
Ganesh

Outbound:
Step 1. Application document is created when transaction is saved.
2. Message control is invoked.
3. Messages are processed by system.
4. Messages are Edited (if desired).
5. Output (ALE / EDI) is checked
6. Validate against Message control record from Partner Profile
7. Application Document is saved.
8. Entry NAST table is created for every selected output program
along with Medium & Timing.
9. Check for Process Immediately .
If (yes)
Determine Processing Program from TNAPR Table.
ELSE
Execute RSNASTED Program.
10. Read Partner Profile to determine Process Code.
11. Process Code points to the Function Module & Invoked.
12. IDoc is generated.
13. Check for ALE Request.
if (Yes)
Perform Filters, Conversions, Version Changes etc.
Else.
IDoc is stored in DATABASE.
INBOUND:
Step 1. EDI Subsystem creates an IDoc file from EDI Messages
2. Subsystem calls Functional Module EDI_DATA_INCOMING from startRFC program.
3. Data in Control Record is validate against the Partner Profile.
4. IDoc is generated in Database and syntax check is carried out.
5. IDoc file is deleted once file read.
6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
7. Check for Process Immediately.
If NO
Execute RBDAPP01 Program
Else
Read Process Code from Partner Profile
Process Code Points to Function Module
Application Document Posted.
further help:
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
Check these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
Please check this PDF documents for ALE and IDoc.
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
Reward points for useful Answers

Custom inbound in B2B

Hi,
I m having problem on the custom inbound configuration.I am following the sample tutorial.I configured in Jdev.In my configuration,B2B will receive file from c:\xyz then it will write to a directory via mediator layer.I configured TP.In TP i configured the channel which will poll from c:\xyz directory.Then it will pass the doc to Host TP.But for the above configuration the file(xml) is not getting read by the TP.I copy the file to the c:\xyz but not getting polled.I even saw the log file and business report section, but did not get any thing regrading this project. Please suggest.

Hi,
I droped the file name Welfergo_12345.dat at c:\xyz.The earlier probl. is solved but still m getting error.Please see the log below
Id 0AE391A5127F56CCAD600000F5DD7700
Message Id 0AE391A5127F56CCAC600000F5DD7200
Refer To Message Refer To Message
Sender Type
Sender Value
Receiver Type
Receiver Value
Sender Welfergo
Receiver Cognizant
Agreement Id
Agreement
Document Type ORDERS
Document Protocol Custom
Document Version
Message Type REQ
Direction INBOUND
State MSG_ERROR
Acknowledgement Mode NONE
Response Mode ASYNC
Send Time Stamp Tuesday, April 13, 2010 9:58:20 AM GMT+05:30
Receive Time Stamp Tuesday, April 13, 2010 9:58:20 AM GMT+05:30
Document Retry Interval 0
Document Remaining Retry 0
Native Message Size 21953
Translated Message Size
Business Action Name
Business Transaction Name
Xpath Name1
Xpath Value1
Xpath Expression1
Xpath Name2
Xpath Value2
Xpath Expression2
Xpath Name3
Xpath Value3
Xpath Expression3
Correlation From XPath Name
Correlation From XPath Value
Correlation From XPath Expression
Correlation To XPath Name
Correlation To XPath Value
Correlation To XPath Expression
Wire Message Wire Message
Application Message Application Message
Payload Storage Payload Storage
Attachment Attachment
Label
Collaboration Id 0AE391A5127F56CCAC600000F5DD7600
Collabration Name
Collabration Version
Business Action Name
Exchange Protocol Name Generic File
Exchange Protocol Version 1.0
Interchange Control Number
Group Control Number
Transaction Set Control Number
Error Code B2B-50547
Error Description Machine Info: (CTSINCALESX1AF) Description: Agreement not found for trading partners: FromTP Welfergo, ToTP Cognizant with document type ORDERS-1.0-INBOUND.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Agreement not found for trading partners: FromTP Welfergo, ToTP Cognizant with document type ORDERS-1.0-INBOUND.

SAP pdf coversion fails to preserve hyperlink (SCOT)

Hi
I create an email in raw text format. The URL is quite long and spans 2 lines.
When Sap Connect (SCOT) is configured to output emails in txt format, the emails are
generated fine, and the URL can be clicked on.
However, when the SCOT email option is configured to output PDF format,
an automatic line break is inserted in the URL. So when you click on the URL hyper link only the first part (first
line) is copied in to the browser, the rest is ignored. So we must cut and paste the rest manually.
Any ideas how to fix this?
Kind regards

You may be able to find more information by putting an infinite loop at the beginning of your user exit:
x = ' '.
while x = ' '.
x = ' '.
endwhile.
and then go into debugging via SM50 and set the x variable to break out of the loop.
This technique is useful debugging workflows and other code which you cannot get to directly by placing a break-point.
Andrew

Inbound XML file into ECC6 .. is middleware required?

Hi
We are running SAP ECC6 and do not have SAP XI.
An external system needs us to send an outbound WMTORD in XML format. We have configured the XML port and succesfully got an xmla file out of the system.
The external system will return a WMSUMO idox in XML format. ... but I am unclear if SAP can process this directly without some middleware or having to run special function modules (somehow?!).
Can anyone help clarify what needs to be done for the inbound xml file ... do I create a file port and SAP simply converts the xml into normal format?
I see some post about running function modules .. im not cleear on what program is used to run these
Any help appreciated
Thx

HI,
To answer your question specifically, No, there is no need for an middleware for your case.
You can just create an inbound port of type xml file port and do the necessary IDOC inbound configuration and that should be enough.
http://help.sap.com/saphelp_nw70/helpdata/en/3f/faa288bb7911d2897f0000e8216438/content.htm
Best Regards,
Ravi

SCOT Config: Message status Transmitted even when mail not received

Dear All,
We have SCOT correctly configured on one of our systems. We are able to send external messages.
The problem we are facing is that sometimes some of the sent email bounces(doesn't reaches recepient). But the status on the message sent shows as transmitted.
We tried with couple of wrong mail ids and systems accepts that and forwards the message to it and sets the message status as transmitted.
We checked with our mail admin for the send logs and the mail server has logs for the messeages as failed.
We are working with the option SAPConnect expects receipt confirmation for internet mail.
Regrads,
Vishal

Thanks all,
My outgoing messages are going fine to other domains.
I have set read receipts confirmation, but that isn't working I guess.
I have tested and configured my system for incoming messages.
I checked it through following test and I received a msg in my sbwp inbox.
telnet {SAP application server} 25000
     220 {SAP application server} SAP 700(37) ESMTP service ready
helo {own host}
      250 {SAP application server}
mailfrom:<{sender address}>
      250 Ok
   rcptto:<{receiver address}>
      250 Ok
data
      354 Enter mail, end with "."
   Date: fri, 15 May 2010
   From: {sender address}
   Subject: test
                            < <-- Enter a blank line here.
   Hello test
   .                        < <-- Enter only a period here.
      250 OK                <<-- This response may take a long time
   quit
      221 {SAP application server} Bye
Replace the lines in curly brackets with relevant values.
indented lines are the system response.
Can anyone let me know what settings has to be done on mail server side so that read receipts starts pouring in.
Regards,
Vishal

SCOT - Inbound Configuration

Similar Messages

Maybe you are looking for