SCOT setting problem

Hi,
I am able to send mail with attachment to my mail id (say [email protected]). But the attachment is in corrupted format.The attachment in the sap outbox is opening correctly. I tried with both ALI and PDF attachment.
The read receipt in my SAP Inbox is with message as 'No delivery to [email protected] (for reason, see long text)'.Then if I checked my SAP outbox, the message sent is with error status.
The same code is working fine in other system.I hope the problem is with the SCOT settings.Here is the configuration in that settings.
NODE:SMTP
RFC Destination: Z_SMTP(tested the connection working fine)
Node in use Checked.
Internet Checked: Set Address Area [email protected]
All Formats selected
Dev. type :POSTSCPT
Any useful pointers will be appreciated with reward points.
Regards,
J.Jayanthi

Seshu,
I maintained connection settings now. But this time I am getting a error in my outlook that 'There was a SMTP communication problem with the recipient's email server. Please contact your system administrator'.Status in my SAP outbox for that mail is unknown.
aRs,
I tried your idea before.But no effect.
Any suggestions?
Message was edited by:
Jayanthi Jayaraman
Message was edited by:
Jayanthi Jayaraman

Similar Messages

Backup failure due to Character set problem

Hi,
I am manually running a COLD backup script in Windows NT environment and all the logs has been captured below:
Recovery Manager: Release 8.1.6.0.0 - Production
RMAN-06005: connected to target database: db1 (DBID=754030292)
RMAN-06009: using target database controlfile instead of recovery catalog
RMAN> shutdown immediate;
2> startup mount;
3> RUN {
4> ALLOCATE CHANNEL disk1 TYPE disk;
5> BACKUP DATABASE TAG 'db1_db_full' FORMAT 'e:\backup\db1\db1_backup';
6> copy current controlfile to 'e:\backup\db1\Control_db1.ctl';
7> }
8>
RMAN-06405: database closed
RMAN-06404: database dismounted
RMAN-06402: Oracle instance shut down
RMAN-06193: connected to target database (not started)
RMAN-06196: Oracle instance started
RMAN-06199: database mounted
Total System Global Area 934143244 bytes
Fixed Size 70924 bytes
Variable Size 260554752 bytes
Database Buffers 673439744 bytes
Redo Buffers 77824 bytes
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: disk1
RMAN-08500: channel disk1: sid=13 devtype=DISK
RMAN-03022: compiling command: backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: backup
RMAN-06003: ORACLE error from target database: ORA-06550: line 1, column 166:
PLS-00553: character set name is not recognized
ORA-06550: line 0, column 0:
PL/SQL: Compilation unit analysis terminated
RMAN-06031: could not translate database keyword
Recovery Manager complete.
As the above log shown, I cannot do any backup command in the RUN bracket and it complains that the character set is not recognized.
This set of error happens when I have create six other Oracle databases in my NT box. Before that, I can manually run the backup with no problem and a backupset has been generated.
If you have come across this problem and have solutions of it. That will be great.
Thanks !!
null

kk001 wrote:
Hi ,
The export Backup failing due to character set problem
. . exporting table ravidlx
EXP-00008: ORACLE error 6552 encountered
ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-553: character set name is not recognized
P
Please suggest how to set character set
I don't know what you have.
I don't know what you do.
I don't know what you see.
It is really, Really, REALLY difficult to fix a problem that can not be seen.
use COPY & PASTE so we can see what you do & how Oracle responds.
do as below so we can know complete Oracle version & OS name.
Post via COPY & PASTE complete results of
SELECT * from v$version;

Using translate function to correct character set problem....

I have a table(TBL_STOCK) on Oracle XE.
Rows come from sql server 2005 with a trigger on sql server table via the linked server.
But there is a character set problem with some character like İ,Ş,Ğ.
They change to Ý,Þ,Ð. in Oracle.
How can i correct these ? Do you suggest the TRANSLATE function ?
What do u think, if i create an After Insert trigger on Oracle table(TBL_STOCK) and convert these character using the Translate function when they inserted from sql server.
Anyone have any other ideas that can be more efficient. Any thoughts appreciated.
Thanks in advance.
Adam
PS:The NLS_CHARACTERSET of Oracle is AL32UTF8.

It is sql server 2005 and Collation is SQL_Latin1_General_CP1_CI_AS

I cannot run You Tube Videos on my Apple Macbook Air MD760HN/B with OS X 10.9.4. the video window displays a message " An error occurred, Please try again later." Learn more. The screen is black with this message. There appears to be some setting problem?

Macbook Air MD 760HN/B with OS X 10.9.4
4 GB RAM, 1.4 Ghz intel Core i5
Problem 1
I.     On Youtube whenever I try to play a video, I get a message on a black screen "An Error Occurred, Please Try Again later. Learn More."
2.   I think it is some setting problem, being a new mac user, I am unable to sort it out.
Problem 2.
How to select more than one file in a folder to copy or delete. like it can be done in Windows with shift Click together.
if one has to select say, file 25 to file 37 in a folder with 75 files. select all (command A) works but I cannot select few continuous files.

Macbook Air MD 760HN/B with OS X 10.9.4
4 GB RAM, 1.4 Ghz intel Core i5
Problem 1
I.     On Youtube whenever I try to play a video, I get a message on a black screen "An Error Occurred, Please Try Again later. Learn More."
2.   I think it is some setting problem, being a new mac user, I am unable to sort it out.
Problem 2.
How to select more than one file in a folder to copy or delete. like it can be done in Windows with shift Click together.
if one has to select say, file 25 to file 37 in a folder with 75 files. select all (command A) works but I cannot select few continuous files.

JDeveloper IDE simple setting problem

Hi,
Recently we switched to JDeveloper from Visual Cafe .I have a simple setting problem.How can I set the options so that IDE gives, the core java classes and packages,and our application classes and packeges, prompts in imports as well as in code.Where to set the options.
eg: when I write
import java. it should prompt all the pakages.
Thanks in advance.
-Gopal
null

I am not sure I understand what you are requesting, but ...
You can configure JDeveloper projects to include various libraries by default.
This is done by selecting menu Tools | Default Project Properties.../ Libraries tab.
You should define a library for your classes.
You can import any of the packages / classes from all the libraries which your project includes.
It would be incorrect for a tool to automatically add a bunch of import lines at the top of every file because each file should import what it needs and just as importantly, not import what it does not need depending on the component type (e.g. a servlet should not include javax.swing.* ).
An easy way to import elements into JDeveloper is to type in something like:
import java.
// and then type in Ctrl Space
and this launches the package browser, you can select packages or classes to import.
You can also do this at the variable declaratiton point such as typing in:
foo() {
Frame x
// Press Control Alt Space
and this will correctly change the type (Frame) to the type you select in the package browser and add the import statement.
-John
null

Reflection function is not working, unable to click on it at all. Need help! Setting problem?

Hi all, I seek for your kind expertise advise on my Keynote. Once I've chosen a slide to open, any type of slide at all, my Reflection button or function is unable to be clicked on to perform that function. However, Shadow function facing no problem.
I can see the Reflection button but it's blurred like not allowing me to click on it at all. Is this cause by some software problem? Or setting problem? iWork has just being installed.
Appreciate your expert advice and help!

Thanks Kelly... That's very helpful. Appreciate that very much!
By the way, if I may ask further, do you know how to how to make the animation like Steve Jobs did during his presentation on Ipad or Ipad2 where the "word" will drop from top onto the centre of the slide with effect or sort of like smoke or dust floating off and dissolved at both sides of the "word"?
Will be more than grateful to be hear from again! Cheers and thanks again.

Oracle 8i us7ascii character set problem - help required urgent.

Hi frnds,
I have a oracle 8i database server installed on sun solaris os. The database character set is us7ascii. In one of the tables TIFF images are stored in a long column. I m trying to fetch these images using oracle 9i client and visual basic(oracle ODBC drivers). But i m unable to do so. I can not fetch special characters.
Is it because of the character set problem? but when i run my code on the server itself, i m able to fetch the images. I tried to fetch the images using oracle 8 i client on windows XP machine but could not do so. Are there any special settings that i have to do on the client side?

Indeed, it's an ODBC issue. Read this statement from Oracle:
From ODBC 8.1.7.2.0 drivers onwards it's NOT possible any more to
"disable" Characterset conversion by specifying for the NLS_LANG
the same characterset as the database characterset. There is now
ALWAYS a check to see if a codepoint is valid for that characterset.
Typically you will encounter problems if you upgrade an environment
that has NO NLS_LANG set on the client (or US7ASCII) and the database
was also US7ASCII. This incorrect setup allowed you to store characters
like èçàé in an US7ASCII database, with the new 8i drivers this is not possible
any more.
Basic problem is the 'wrong' characterset US7ASCII in the database. As long as no characterset conversion happens (that's the case on the unix server), special characters are no problem.
Werner

DB Creation(character set Problem)

HI,
I am in the process of creating new database from the full export dump file which i got from client. In the export logfile i can see,
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
I am creating the database manually at my site and planning to import that full export dumpfile from the client.
Do i need to create the DB with national character set WE8MSWIN1252 or can i also use character set as AL32UTF8
I want to se the correct character set so that my import doesn't fails because of charactor set problem.
Please help me.
Oracle Version At client site:9.2.0.1
OS :Windows
Oracle Version at my site:9.2.0.1
OS:LINUX
Thank You..

I can't answer your question because of several things.
The first is that all versions of 9i are currently in desupport and it has been years since I've seen one.
But if I was forced to work with 9i I certainly wouldn't do anything at all until I had patched to 9.2.0.8.
My recommendation would be, unless someone else can help you, to try it and see what happens.
Nothing ventured nothing gained.

Oracle character set problem - help reqed urgent !!

Hello frnds,
I have a oracle 8i database server installed on sun solaris os. The database character set is us7ascii. In one of the tables TIFF images are stored in a long column. I m trying to fetch these images using oracle 9i client and visual basic(oracle ODBC drivers). But i m unable to do so. I can not fetch special characters.
Is it because of the character set problem? but when i run my code on the server itself, i m able to fetch the images. I tried to fetch the images using oracle 8 i client on windows XP machine but could not do so. Are there any special settings that i have to do on the client side?

i run my code on the server itself, i m able to fetch
the images. I tried to fetch the images using oracle
8 i client on windows XP machine but could not do so.You able to fetch the image , So it is not because of the character set.
First thing you need to consider is that use certified combination of OS , client and database server only. Check Certify - Oracle's Certification Matrices
Virag

Agent control character set problem

Hi,
here's my problem :
i've got the grid that's running on a RHES4 with an agent. On another RHES4, i've got 10g databases that run and another agent.
The repository database is configured like this :
nsl_language = AMERICAN
nls_territory = AMERICA
character set = AL32UTF8
all the uploads from the agent on the RHES4 where the grid is installed are ok.
On the other server, as soon as there's an UTF8 character in a xml file (like " é " ou " ' "), the upload fails and the agent stops.
in the logs, it s clear it comes from this. I've deleted all the occurences of UTF8 characters in the xml file and restarted the upload and it's ok...
I've tested different configurations but without success.
Any clue ?
Alivetu

Thanks for the reply,
NLS LANG is set on the 2 machines with FRENCHFRANCE.WE8ISO8859P15
I've added the line '<?xml version="1.0" encoding="ISO-8859-1"?>' at the beginning of the xml file that doesn't work and made a 'emctl upload'....it has passed and the agent has stopped arrived to another UTF8 xml file...
So, it really is a character set problem but where to set it ???
Alivetu

EXPORT Backup failing due to character set problem

Hi ,
The export Backup failing due to character set problem
. . exporting table ravidlx
EXP-00008: ORACLE error 6552 encountered
ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-553: character set name is not recognized
P
Please suggest how to set character set
Regards,
kk
Edited by: kk001 on Aug 29, 2011 7:22 PM

kk001 wrote:
Hi ,
The export Backup failing due to character set problem
. . exporting table ravidlx
EXP-00008: ORACLE error 6552 encountered
ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-553: character set name is not recognized
P
Please suggest how to set character set
I don't know what you have.
I don't know what you do.
I don't know what you see.
It is really, Really, REALLY difficult to fix a problem that can not be seen.
use COPY & PASTE so we can see what you do & how Oracle responds.
do as below so we can know complete Oracle version & OS name.
Post via COPY & PASTE complete results of
SELECT * from v$version;

Space Designer Save Setting Problems

Space Designer Save Setting Problems
On the right side of the space designer you have "dry" and "rev" settings.
On reopening the plug-in the dry setting switches back to zero, although I saved it at a different setting...
Everytime, every project...

Does it do this on audio/software instrument channels and aux channels?
In general, when you load SD on an aux channel, Logic assumes it's going to be an FX return and so "helps you out" by setting the dry level to zero for you...
On other channel types it should work as expected...

HT4623 International Missed calls on 4s do not show 00s before the number, which creates the problem of call back. Is it a Tecnical fault or a Setting problem?

International Missed Calls on my i phone 4s do not reflect 00s which creates a problem of a Call Back. Is it a Tecnical inadequacy or a Setting problem?

It has righted itself. I am not sure how. But I turned off the Powerbook. And on the MacBook Air, I made sure to change the MAC number to the MacBook Air one.
I restarted the MacBook Air. Now, the internet radio is working well, no rebuffering the stream every ten seconds.
And when I turned on the Powerbook and tried the internet this time, I could not get connected.
I think the bad internet connection on the MacBook Air was due to the fact that the internet was being shared by two computers. Funnily enough, the internet was OK on the Powerbook but was not good on the MacBook Air when I did that.
So, it didn't turn out to be a MacBook Air problem but an internet provider problem.
I will keep my fingers crossed that the MacBook Air internet connection keeps working fine.
I think it's possible to use the internet on both computers simultaneously but the quality of the connection is poor on the MacBook Air when I do that. And when I turn off one of the computers, it is not possible to share an internet connection when I turn that computer back on again. I have to set up the MAC number of that computer again on the nespot site for it to access the internet. But if I do that, the internet quality on the MBA suffers.

EAX setting problems in Unreal Engine 2

'EAX setting problems in Unreal Engine 2N In Windows 7, I have noticed one problem that seems to be affecting all of the Unreal Engine 2 games (tested Unreal Tournament 2004 and Unreal II: The Awakening): the sound setting doesn't change when walking through rooms, for example, if you di've under water or walk into a pipe, the sound doesn't change at all. But EAX surround effects do work correctly - the sound isn't stereo.
Also, this doesn't seem to affect Unreal Engine nor Unreal Engine 3 games, since Unreal Tournament: GOTY does change the sound setting (at least when underwater), and Unreal Tournament 3 changes the sound setting depending on your location, as it should.
Any suggestions on how it would be possible to reenable the effects? Or any insight on why this happens?
Using Creative SoundBlaster XtremeGamer with 2.8.003 drivers.

<a rel="nofollow" target="_blank" href="http://connect.creativelabs.com/alchemy/Lists/Games/AllItems.aspx"]http://connect.creativelabs.com/alchemy/Lists/Games/AllItems.aspx[/url]
Scroll down toward the bottom and you will see settings for EAX and those games. Be sure to grab the newest version of Alchemy for your card here>
<a rel="nofollow" target="_blank" href="http://ccftp.creative.com/manualdn/Applications/AVP/202/0xC049DCFD/ALMY_PCVTAPP_LB__4_02.exe"]http://ccftp.creative.com/manualdn/Applications/AVP/202/0xC049DCFD/ALMY_PCVTAPP_LB__4_02.exe[/url]

OPEN DATA SET PROBLEM

Hello ,
I use the command OPEN DATA SET in order to upload file content from server ,
the problem is that i getting error :_No such file or directory ._
the file is exist in server I can see it when i put the path on windows start->run
and i give the permission for the folder to everyone .
1. My question is what i miss here
2. when i do little test and try to use GUI_UPLOAD i see the file content so i don't understand what is wrong here the file is not on my local PC
Regards
James

hi James,
the parameter file_name receives the name of the file (ja, ja, ja.......)
here comes the explanation:
in the transaction FILE you must define phisical and logical path for a file:
for example:
MY_FILE => pointing to the folder /host/temp/
and here comes the call to the function in your program:
CALL FUNCTION 'FILE_GET_NAME_USING_PATH'
    EXPORTING
      client                     = sy-mandt
      logical_path               = l_path    " the name of your logical path defined in trx FILE (MY_FILE)
      file_name                  = p_filename " the name of the file you want to read (for example: file.txt     )
    IMPORTING
      file_name_with_path        = file_trg
    EXCEPTIONS
      path_not_found             = 1
      missing_parameter          = 2
      operating_system_not_found = 3
      file_system_not_found      = 4
      OTHERS                     = 5.
in the variable file_trg you should get the value /host/temp/file.txt (from the example) to do the open dataset.
sorry about my english
regards, Sebastiá

SCOT setting problem

Similar Messages

Maybe you are looking for