Scout camera image showing green line in image some time

We are using Basler Scout Camera Model no SCA1390-17gc  (GigE) for our application.
we are getting the green strip line in the image.
In Max we set 8000 Packets/Sec.
Network Jumbo frame we set 8kbps
we awaiting for your support

Hi Prakash,
Are you using multiple Scout Cameras? However, follow this link for a detailed explanation on acquiring images from the Scout camera.
http://zone.ni.com/devzone/cda/tut/p/id/5750
Please confirm if the link helps or not, and whether you still get the green lines.
Regards,
Sahil Singla
Applications Engineer
National Instruments
Regards,
Sahil Singla
Applications Engineer | National Instruments
(Give Kudos to good Answers and Mark it as a Solution if your problem is Solved)

Similar Messages

  • Macbook Pro screen showing green line and blacks out all the time

    My macbook pro have been recently showing green horixontal line all over the screen at times , and it goes away  after restarting couple of times, after i log in the screen black outs after couple of minutes and sometimes the screen act weird 

    I would suspect that there is a hardware component failing. I would take it in for diagnosis.
    Barry

  • HT2090 my facetime camera is showing green light but not opening up, no voice..what is happening

    i cant get my facetime working. no video just a green light

    Macbook Pro
    10.7 Lion
    http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    For More Info:
    http://support.apple.com/kb/HT2090?viewlocale=en_US&locale=en_US
    Best.

  • Firefox 31.0 EV-Certificate not showing green address bar in some cases

    I'm on vacation, using a public (non-password protected) wifi connection in a hotel.
    My bank's website is using an Extended Validation Certificate, hence the address bar should be green. Yet, right now, the address bar is no longer green (but it does show the lock icon). I checked some other TLS sites and, for example, https://www.verisign.com/ does show a green address bar.
    I also checked in Internet Explorer, which does show a green address bar. I compared the version and fingerprint for the certificates in Internet Explorer vs Firefox and they match.
    Is this a known issue?
    If not: has anything changed in Firefox 31.0 that could result in this?
    Cheers,
    Refund.
    P.S. Yes, I contacted my bank, their advice is to download and install Google Chrome because: 'Their experience with Chrome is better than with Firefox.' and see if the address bar stays green.

    What do you see in "Tools > Page Info > Security" if you click the padlock and click the "More Information" button?
    Are there any other icons on the location/address bar like a shield or exclamation mark?
    If there is a shield icon to the left of the "[[Site Identity Button|Site Identity Button]]" (globe/padlock) on the location/address bar then that means that mixed active content is blocked.
    *https://support.mozilla.org/kb/how-does-content-isnt-secure-affect-my-safety

  • IOS4 mail client only showing 2-line preview for some emails

    The only account tied into my iPhone 4 right now is my Gmail account. I was able to set it up quickly and it's been mostly trouble-free.
    However, I noticed that even though I have "Preview" set to "2 lines", it is not showing the preview for every email. Some emails, in the inbox view, properly show the sender, subject, and the first 2 lines of the message. Others only show the sender and subject. If I click on the ones that don't show a preview and view them individually, I am able to see the body of the message properly.
    This never occurred on my 3G running iOS 3.x. Has anyone else experienced this?

    I'm having the same exact issue in addition to the no subject emails. If I do a hard reset of the phone it seems to resolve the issue temporarily. My email is coming from gmail via the IMAP server. Any ideas of what seems to be the root cause anyone?

  • My iphone 4 has green lines

    my son dropped my cell on the hardwood floor. The screen isnt cracked but it show green lines. need help asap.

    Follow these steps in order until the issue is resolved.  Backup your device in itunes or icloud first.
    1) Restart your device (press and hold the HOME button and power button until the Apple logo appears and then release)
    2) Go to settings > general > reset > reset all settings
    3) Restore your device

  • Green line and flutter at bottom of screen amidst slowmo dissolves.

    I'm editing a wedding shot on miniDV at 30i. As with most weddings I use a lot of 50% speed with frame blending and a lot of dissolves. I've noticed that during some dissolves I get two pixels of what I can only term as flutter on the very bottom of my screen. This is especially noticable generally when I'm going from a bright shot to a dark shot or vice versa. It doesn't happen all the time but it happens very frequently. I also occasionally get a green line that renders for a single frame at the bottom of the screen.
    I should note a few things: first, this doesn't appear until I actually render the dissolve. In realtime effects they all look fine. second, the problem is totally consistent even if I rerender. I will always get the same flutter or the same green line at the same time code in the sequence with the same clip every time.
    I've only begun my investigations into this problem, but I believe it's a field problem of some kind in that some bug in how FCP renders is not handling the fields properly. I plan to submit a detailed bug report once I narrow the problem down further.
    I tried changing my sequence from bottom field first to no field dominance and the problem disappears. My final format is DVD so my question to the gurus out there as a fix for the time being is: if I render my entire sequence with no field dominance and then export it and compress (using something other than Compressor 2 which has known blockiness issues) and in the compression program specify bottom field first will the fields split back out fine without causing some other issue just as if I'd always had it bottom field first? In theory I would think that should be the case.
    Also, is anyone else experiencing or come across this problem?
    Dual 2.7Ghz G5 1.5GB RAM   Mac OS X (10.4.3)  

    If that is the concern, either crop the offending clip by a couple of scanlines, or use Andy's letterbox generator (in downloads on http://www.proapptips.com - you may have to register, but the plugin is free), and throw it over the offending section...
    Patrick

  • When browsing a new library that I created, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle the image appears. How do I get images to appear in the browser rectangles?

    When browsing a new library that I created and exported onto an external hard drive, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle, the image appears, but all the other rectangles remain empty - no image. How do I get images to appear in the browser rectangles? I am viewing this on a second computer (an older intel duo iMac), not the one I created the library on (a MacBook Pro). Both computers have Aperture 3.2.4 installed. When I return the external to the MacBook, all images appear in browser rectangles. What's happening on the iMac?

    You may have a problem with the permissions on your external volume. Probably you are not the owner of your library on the second mac.
    If you have not already done so, set the "Ignore Ownership on this Volume" flag on your external volume. To do this, select the volume in the Finder and use the Finder command "File > Get Info" (or ⌘I).
    In the "Get Info" panel disclose the "Sharing & Permissions" brick, open the padlock, and enable the "Ignore Ownership on this Volume" flag. You will have to authentificate as administrator to do this.
    Then run the "Aperture Library First Aid Tools" on this library and repair the permissions. To launch the "First Aid Tools" hold down the ⌥⌘-key combination while you double click your Aperture Library. Select "Repair Permissions" and run the repair; then repeat with "Repair Database". Do this on the omputer where you created the library and where you can see the thumbnails.
    Then check, if you now are able to read the library properly on your iMac.
    Regards
    Léonie

  • Apple tv 3 shows green image or with static

    Hello,
    I have a problem with an apple tv 3rd generation.
    As the title says, sometimes the image is green or just static.
    I connect it through HDMI and have tried on 2 different tvs (other HDMI devices work fine). I even restore the firmware and nothing.
    This is a short video of how it looks like http://www.youtube.com/watch?v=dRXzP0ZSJqo
    Anyone knows what is wrong with it or how to fix it?
    Thanks a lot.

    Well my issue is fixed, turns out the update with which cause my issue must have locked somthing up in the settings.
    I spent some time with one of the support people which is level two or higher and we found that the ATV3 had IP address etc setting for ethernet even with no ethernet/wifi available. We restored the ATV3 several times and even went to earlier versions of firmware to try to undo this, sadly this failed and my ATV had to be replaced, Apple sent out a new one now all is good again.
    I suggest you contact them and if you are able to get them to replace it for you.
    I did also notice that the iTunes update that came out at the same time had a problem which may have cause this to happen in the first place.
    Restore did not work unless you help option key while hitting the Restore.

  • Green line on the side of my export from an image sequence

    I have created an image sequence
    at 1024x768. I bring it into PP CS4 and on the far right side there is a green line running top to bottom. The timeline is the same size as the image sequence. What would cause this and how do I get rid of it?

    Have a look at this thread: http://discussions.apple.com/thread.jspa?threadID=1802274

  • Show the line after draw with IMAQ selectline.vi in the image display

    hi..
    may i know how to show the line on the image display after i draw the line by using the IMAQ select line.vi??
    i use the the IMAQ select line.vi for drawing few couples of lines...but i don know how to show it all on the image display...
    because i will forget the location of the lines after i draw it by IMAQ select line.vi...
    thanks for help..

    Hey,
    Just use IMAQ Draw.vi
    Christian

  • My iPhone 4 camera images have blue lines on them. Anyone else?

    My iPhone 4 camera images have blue lines on them. Anyone else have this?

    My iPhone 4 camera images have blue lines on them. Anyone else have this?

  • Windows XP can no longer "see" my iPhone as a camera/imaging device

    can't sync photos from iPhone to computer; Windows XP doesn't even see it as a camera or imaging device. Weird, since iTunes is able to synch music/contacts.
    No matter how I check, Windows XP can't find the device:
    control panel --> scanners and cameras - nothing!
    My Computer --> devices with removable storage - no iPhone
    Computer Management--> Device Manager - no iPhone or scanner/camera

    UPDATE - I think I've resolved my problem and that it is related to having my iPhone "passcode locked".
    1. I connected it and unlocked the iPhone, synced music, but had the problems I noted in my original discussion post
    2. I disconnected the iPhone, closed iTunes, reopened iTunes and reconnected the iPhone (making sure it was NOT passcode locked before connecting it) -- everything works fine.
    3. now I can get back to my original issue, was to figure out how to get only my NEW iPhone captured photos to synch, or at least have them date ordered. But that's a subject for another post.
    BOTTOM LINE - passcode lock may be the key for those who are having problems with their PC not able to see the iPhone as a camera/imaging device

  • Satellite S70-A-11H web camera image quality is not good

    Hi,
    Running windows 8.1 which came with the laptop.
    New out of the box.
    As per title.
    I find the image quality of the camera image to be very grainy, poor color etc.
    When I start the web camera using the search bar on the right, it starts using the Microsoft application, when you scroll down to settings all that is available under settings/options is Photo aspect ratio, Grid lines, Location info.
    I have been in touch with Toshiba Tech support who advised to do a Laptop refresh, which I did.
    This made no difference.
    After which they asked me to find the Toshiba web camera application on the laptop, this should have been in the Program Files folder in the Toshiba folder.
    This application does not exist on my laptop.
    The tech checked the same model laptop that he had available, which I was told when he selected the web camera, it opened using the Toshiba Web camera application, not Microsoft.
    I have looked at other Toshiba laptops with web cameras, and found the image quality to be better. Unable to get to settings as these laptops were on display and in demo mode, hence locked down to some extent.
    I can't believe that a web camera in this day and age for this value of laptop to have such poor image quality. My digital camera from 10year ago has better image quality.
    I have checked through the laptop, and I do not have this application installed.
    I have checked for updated drivers and software for my laptop, and cannot find this application to be applicable for my laptop. Drivers etc appear to be up to date.
    I would like to know, do other users of this S series have any issue of camera image quality.
    When the camera is selected what application is being used, Toshiba or Microsoft.
    Is Toshiba web camera application applicable to Windows 8.1, as I cannot see it listed for 8.1
    Does this sound like a hardware fault or a application/software issue.
    Any direction or help on this matter would be appreciated, as I am getting to the point of returning this laptop for a refund.
    Thanks in advance.
    D.
    Yes, I have tried using the FORCE!

    > The tech checked the same model laptop that he had available, which I was told when he selected the web camera, it opened using the Toshiba Web camera application, not Microsoft.
    The Toshiba webcam application is available for Win 7 system but the Win 8 and Windows 8.1 system use the own Microsoft webcam application.
    > I have looked at other Toshiba laptops with web cameras, and found the image quality to be better.
    Different Toshiba notebooks are equipped with different webcams.
    Satellite S70-A-11H was equipped with a *0.92 mega pixel webcam*
    A Satellite A660 for example was equipped with an _1.3M mega pixel webcam_
    So there is a difference in webcam resolution

  • MBP display is showing a thin green line on left side of the screen

    Hi All,
    I have 15 inch Unibody MacBook Pro bought in late 2009. Specs are as below. Initially it was 4GB RAM. I upgraded it later to 8GB OWC RAM.
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,3
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.8 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          6 MB
      Memory:          8 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MBP53.00AC.B03
      SMC Version (system):          1.48f2
    NVIDIA GeForce 9400M:
      Chipset Model:          NVIDIA GeForce 9400M
      Type:          Display
      Bus:          PCI
      VRAM (Total):          256 MB
      Vendor:          NVIDIA (0x10de)
      Device ID:          0x0863
      Revision ID:          0x00b1
      ROM Revision:          3448
      gMux Version:          1.8.8
      Displays:
    Color LCD:
      Resolution:          1440 x 900
      Depth:          32-Bit Color
      Core Image:          Hardware Accelerated
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Quartz Extreme:          Supported
      Built-In:          Yes
    Display Connector:
      Status:          No Display Connected
    I bought Lion from App Store recently and installed it successfully on my MBP. After few days when I left my machine running Lion from morning till evening I see a thin green line on the left side of the screen. I tried searching the web and tried few options like restarting the machine, resetting NVRAM and doing Apple hardware test (By pressing D while the machine boots). The Apple hardware test did not detect any problem. The green line still exists.
    Please suggest me how to get rid of green line.

    Hi Brent,
    I took it to apple service center. They did some checks and found out that the display has gone bad and they replced it with new one.
    Did you try connecting other display (may be Apple Display or Dell monitor) using an adapter?  In my case the Apple service center people tried doing it and the display was appearing just fine without any green line. So the fault was in my MBP display.

Maybe you are looking for