Scout mode and sbx at same time? Zxr and battlefield 4

I just recently purchased a soundblaster zxr for playing battlefield 4. I'm still trying to find the best settings, if anyone can help, I would appreciate it so much.
When I try to enable scout mode, SBX pro studio becomes disabled. Likewise, when I have scout mode enabled and then I change a setting in SBX pro studio, scout mode becomes disabled. These two modes can't work together?

IMO scout mode already include a set of predefined SBX configurations... so Its either that or your own settings.

Similar Messages

My ipod touch is in recovery mode n at the same time nt being detected in itunes

my ipod touch is in recovery mode n at the same time nt being detected in itunes

See if placing the iPod in DFU mode will all iTunes to see the iPod so you can restore it.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Next try another computer to help determine if you have an iPod or computer problem.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

X3500 "RFC 2684 Bridged" and "Bridged mode only" at the same time

Is it possible to achive this? With some older modem i could configure one ethernet port for Bridged mode only, so that i could connect directly to Internet through that port with own ip given by my ISP, and at the same time have the modem handle NAT internet connection for WLAN and other ethernet ports.
I really need this feature, is it possible with Linksys X3500?

Hi, the router does not have that feature. You can only select one internet connection type at a time. You may need to check on business class modem/router; perhaps they do have that feature.

Can synced lights, a wireless shutter remote and live mode work at the same time on the Canon600D?

I have a pair of synced lights connected through the hot shoe, and I'd like to use live mode and a wireless shutter remote to take self portraits from a distance... is this possible with the Canon600D? (Rebel T3i)
I'm finding that turning on live mode stops the lights from flashing, and even with it off, the lights won't flash if I use the remote to take the photo.
Help would be very appreciated!

Did a quick search, I don't think the 600D has the 'silent shutter' option.
But I might be wrong, it might only be manual only flashes that don't fire in Live View, TTL flashes (any brand) may work. Maybe it has something to do with the mirror being locked up. Regardless, a wireless trigger will behave the same as a non-TTL flash, so it's not going to work with off camera flash.
However, I think that Magic Lantern has a fix for it. Might look into that if it's something you need. That said, I've taken hundreds, probably thousands of photos of myself without Live View. Just tether to a laptop/tablet and you can see the results after you take the shot; adjust accordingly.

How to make two pictures that are in side by side mode end at the same time?

I have two pictures that I have set up to show side by side. But when that section ends, one of them disappears and the other continues to play for another second. How do I make them end at the same time?

You already posted this in another thread. Why start another?
http://discussions.apple.com/message.jspa?messageID=9873386#9873386
It just makes it harder for people to help you and for others looking for answers. If you still need help you can just "bump" the original thread.

Opening Form in Insert mode but making a query at the same time

My problem is that I want to open a Portal Form in Insert mode but at the same time making a query.
If I call a form with patameters the form opens automatically in update mode (to be more precise with FORMSTATE = UPDATE_AND INSERT). In that case the insert button is not shown.
I have come very close to a solution by running this code:
BEGIN
p_session.set_value(
p_block_name => 'DEFAULT',
p_attribute_name => '_FORM_STATE',
p_value => 'QUERY_AND_INSERT');
END;
under "... before processing the form". The form-state changes to QUERY_AND_INSERT' and I get the record from the table that I want but I still see no insert button!
I think that I can solve this problem in some table-triggers in the database but it would be interesting to know weather it is possible to do this in the portal.

Kari,
You can workaround the disappearing Insert button by creating a custom button instead.
If you look at the "standard" Insert button code it looks like this:
--- Type your PL/SQL code here...
doInsert;--- This is the default handler
--- ...and here, thanks...
in the generated forms package doInsert just calls internal insert handler:
procedure doINSERT
is
begin
onINSERT(
p_block_name => p_block_name ,
p_object_name => p_object_name,
p_instance => p_instance ,
p_event_type => p_event_type ,
p_user_args => p_user_args ,
p_session => p_session);
end doINSERT;
If you add a custom button to your form and from PLSQL event combobox select "Custom", then copy&paste this code to the event code:
onINSERT(
p_block_name => p_block_name ,
p_object_name => p_object_name,
p_instance => p_instance ,
p_event_type => p_event_type ,
p_user_args => p_user_args ,
p_session => p_session);
You will get a custom button which does exactly what the Insert button does and it will not disappear from the screen.
Thanks,
Dmitry

My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Can oracle work in shared and dedicated mode at the same time?

Hi All,
can oracle work in shared and dedicated mode at the same time?
Thanks

A database can work only in one mode at a time.
If the database is started in Dedicated Mode then it can not run in the Shared Mode. If you need to run it in the Shared Mode, bring down the Database , change DISPATCHERS, SHARED_SERVER, SHARED_SERVER_SESSIONS parameters in initfile and bring up the database to run it in Dedicated Mode.
But there is one catch here, if you have started the database in Shared Server Mode even then you can make a Dedicated connection to server.
Thanks!
M-

How to have a creative p5800 working in 5.1 mode and microphone at the same time

pls, can somebody advise, how can i use my creative p5800 in 5.1 mode and at the same time to have microphone working properly.
for the moment i have installed my creative as stereo speakers and the mic is plugged into the sound card, which is not very conviniet, because my rear speakers are not working.
i would be very greatful if somebody can help me.
10x in advance

Duplicate thread.
Cat

CSM route mode and bridge mode can exist at the same time?

I'm using CSM on ver 4.x,and I used to the bridge mode for firewall load balance,for a new requset,I have to create a new server/client vlan,but the original firewall load balance was effected when I issued the server vlan command,and I'd like to use route mode for the new server farm,I'm wondering that route mode and brige mode can't exist at the same time,because it seems it doesn't make sense.Any reply will be very appreciated.

you can use bridge mode and route mode at the same time.
Traffic with desintation mac address being the CSM will be routed, otherwise it will be bridged.
Gilles.

Can an Ironport work in both WCCPv2 and L4 Traffic monitoring modes at the same time?

Hello Ciscoers,
We have an ironport installed and we use WCCPv2 to redirect the traffic. And as it occurs, I have a need to forward the traffic for another network, that uses another path to the Internet.
So I was thinking using the L4 Traffic Monitoring.
To the best of your knowledge, is there a way to have the appliance use both WCCPv2 and L4 Traffic monitoring at the same time? From the configuration, it's one or the other.
Thanks,
J.

Ok. I'll try.
As a matter of fact, I plan to use policy-based routing to forward all the "interesting" traffic to the appliance.
For your TCP-Resets not seen, do you allow ingress on the span session?
J.

Can I configure csm as one arm and routing mode at the same time?

My csm currently is configured as the routing mode and bridge mode, resently I have a service requirement which I think the one arm mode should be the best resolution. Can anybody let me know if there will be any affect if I add the one arm mode to the currently production environment?
Thanks in advance.
Jason

Gille,
Thanks for your quick response. I notice you have same opinion about the one arm mode in your other post, but I think in the multi-tire data center design with fw in bridge mode and csm in one arm mode with RHI, do give us a lot of flexibilty. If I use policy routing instead of source nat, can I overcome these limit you metioned?
Do you know who csm could handle the TFTP traffic? I may have too much question, I am realy looking for your suggestion.
Thanks
Jason

Can a single Access Point support both bridge mode and Access Point mode at the same time

Hi Guys
Does anyone know which access point can work in both bridge mode and AP mode ?
Cheers

Well what are you trying to cover. If its really a large outdoor area, then look at the mesh AP. Those require a WLC. Autonomous or stand alone ap can perform bridging on one radio and client access on another. You can also look at AP that support indoor mesh that also controlled by a wlc. If your putting APs outdoors, then look at the outdoor mesh.
Thanks,
Scott Fella
Sent from my iPhone

TS3694 I was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current ios 6.0.1. plese send me some thing that is

was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current ios 6.0.1. plese send me some thing that is useful

Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474.

How to delete photo's from both Iphoto and source (external HD) at the same time

I've seen a few postings on this but none seem to answer the quetion. Sorry if this is a duplicate and I coudn't find the answer.
I have an external HD with over 4GB of pictures in various folders and subfolders. I would like to import one folder at a time and go through the photo's using iPhoto to choose which ones I want to keep and which ones I don't. If I come accross a picture I don't like I would like to delete it in iPhoto and at the same time have it deleted from my external HD. I have tried the following with no success:
1. Import photo's to iPhone and delete photo's I don't want. I did this in the photo's view, not events or albums.
2. After deleting the photo's I empited the iPhoto recyling bin which then sends the photo's to my Macbook pro recycle bin
3. I then emptied the macbook pro recyle bin.
From what I've read this is how you're supposed to be able to delete photo's permantently form you HD or External HD. The photo's I delete never end up getting erased from my external HD though. So now I'm still stuck with a back up of a bunch of pictures I don't want on my external HD. They are gone from iPhoto but this doesn't help or avoid taking up space. This only cleans up iPhoto library but not my actual external HD.
So am I correct that there actually isn't any way to do this other than going through the photo's on my external HD using Finder and deleting them before importing to iPhoto?

A managed library is the default type that iPhoto creates. Make sure you have the option selected to copy photos into iPhoto when importing:
was hoping it would at least keep thumbnails of all my photo's.
I use a DAM (digital asset management) program which will do exactly what you want: Media Pro 1. It creates catalogs (libraries) of thumbnails, up to 640 x 480, that is uses to manage the photos. You can do anything to the photos except edit, slideshows, or anything that requires the full source image when the source files are not available. You can arrange photos in Catalog Sets (like iPhoto albums), add keywords, etc. to them even when the sorce files are not available. When the source files are available you can write that metadata to the source file and rename files. You can use Media Pro in demo mode for about a month I believe.
A catalog file for 44,000 photos (178 GB) with the thumbnails set for 320 pixels at high resolution is only 1.5 GB. The larger the thumbnail selected the larger the catalog file will be.

Scout mode and sbx at same time? Zxr and battlefield 4

Similar Messages

Maybe you are looking for