SCP solved on my home built

I managed to solve the SCP problem with my home built rig and thought that I would share my story with the board. I am not saying that this will work for everyone else - or that it is an ideal solution - but it worked for me!
I have a home built media centre setup which had an old Audigy 2 ZS card in it and had been using for years without issue. To cut a long story short, I decided to upgrade to a Fatalty XFi card to try and get a best out of my rig when watching movies and playing games.
My rig contains 3 TV tuners (2 USB & PCi), 2GB RAM, a single GEForce 6 card, a 550W PSU, adaquate cooling, iTrigue 5600 speakers and now a Fatalty sound card (with the I/O board fully connected up). I am running MCE 2005 fully patched with all rollups and fixes currently available.
The installation of the card was painless and I installed the latest and greatest drivers off of the Creative website (v2.09.000 dated 9 Sept 06). Needless to say, I started to notice the often reported Snap crackle and pop syndrome when watching DVDs, watching TV, playing games and listening to MP3's.
I tried tweaking every setting the driver to try and identify a cause but, it didn't matter what setting I changed, I still had the same symptoms.
My next step was to try switching PCI slots so I used the Creative uninstaller and completely uninstalled the card, powered down, moved the card to another slot and re-installed. The same problem still persisted!
I should clarify at this point that my rig does not have an nForce mobo or chipset (I am Intel based)...the only nvidia component in my rig is a GEForce 6600 GT graphics card which runs via a PCIe6 interface.
My next step? The Creative posting indicated that the problem with the nForce mobos was down to PCI timings / latency so, I pulled the only other PCI device out of my rig. I uninstalled and removed the rarely used PCI TV Tuner card (a Hauppauge 00 analog / digital hybrid). To my utter amazement, my SCP problem was gone and now 3 weeks later, I can honestly say that I have not had a single SCP?mummer out of my card / speakers and the sound quality has been impeccable.
Now I know that this is not an ideal solution - I have had to remove one piece of hardware to get another to work - but, in my case, the TV tuner was hardly used and my 2 USB tuners still work fine without producing the SCP issue I was originally having.
[size="3" face="Times New Roman">I guess all I can conclude from this is that is isn't just nForce mobos that can cause this issue as it was a TV Tuner in my case - a Hauppauge 00 to be specific. It begs the question whether it is an incompatibility between Creative and Hauppauge kit or something more wider ranging - I know the PCI tuner card was pretty intensi've PCI traffic wise as it sends all audio & visual information over the PCI bus!

I've been crashing right and left, with BSODs. At first I thought it
might be my ASIO drivers, so I bought a new audio interface. Still
crashes.
That sounds like a hardware problem, not a PR problem. Look at the second included link: Some suggestions...

Similar Messages

[SOLVED]Folding at Home issues.

Solution: It was a mixmatch of opencl drivers. I had opencl-nvidia installed with nvidia-304xx drivers. Once I changed opencl-nvidia to opencl-nvidia-304xx it fixed the problem and started folding. Thanks for the help!
Hey guys, trying to get my FAH up and running but I'm running into an issue with my nvidia cards. I tried posting on FAH's forum but they just tell me I need to have nvidia proprietary drivers installed...which I do. And the support seems to end there. Looking for some help. Here is the error log that shows up when I try and fold on my two gpus (evga gtx660, one normal, one SC)
*********************** Log Started 2014-08-06T16:32:24Z ***********************
16:32:24:************************* Folding@home Client *************************
16:32:24: Website: http://folding.stanford.edu/
16:32:24: Copyright: (c) 2009-2014 Stanford University
16:32:24: Author: Joseph Coffland <[email protected]>
16:32:24: Args: --config /opt/fah/config.xml --exec-directory=/opt/fah
16:32:24: --data-directory=/opt/fah
16:32:24: Config: /opt/fah/config.xml
16:32:24:******************************** Build ********************************
16:32:24: Version: 7.4.4
16:32:24: Date: Mar 4 2014
16:32:24: Time: 12:02:38
16:32:24: SVN Rev: 4130
16:32:24: Branch: fah/trunk/client
16:32:24: Compiler: GNU 4.4.7
16:32:24: Options: -std=gnu++98 -O3 -funroll-loops -mfpmath=sse -ffast-math
16:32:24: -fno-unsafe-math-optimizations -msse2
16:32:24: Platform: linux2 3.2.0-1-amd64
16:32:24: Bits: 64
16:32:24: Mode: Release
16:32:24:******************************* System ********************************
16:32:24: CPU: Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz
16:32:24: CPU ID: GenuineIntel Family 6 Model 45 Stepping 7
16:32:24: CPUs: 8
16:32:24: Memory: 7.74GiB
16:32:24:Free Memory: 4.34GiB
16:32:24: Threads: POSIX_THREADS
16:32:24: OS Version: 3.15
16:32:24:Has Battery: false
16:32:24: On Battery: false
16:32:24: UTC Offset: -4
16:32:24: PID: 4332
16:32:24: CWD: /opt/fah
16:32:24: OS: Linux 3.15.8-1-ARCH x86_64
16:32:24: OS Arch: AMD64
16:32:24: GPUs: 2
16:32:24: GPU 0: NVIDIA:3 GK106 [GeForce GTX 660]
16:32:24: GPU 1: NVIDIA:3 GK106 [GeForce GTX 660]
16:32:24: CUDA: 3.0
16:32:24:CUDA Driver: 5000
16:32:24:***********************************************************************
16:32:24:<config>
16:32:24: 
16:32:24: <proxy v=':8080'/>
16:32:24:
16:32:24: 
16:32:24: <power v='full'/>
16:32:24:
16:32:24: 
16:32:24: <passkey v='********************************'/>
16:32:24: <team v='224384'/>
16:32:24: <user v='15goudreau'/>
16:32:24:
16:32:24: 
16:32:24: <slot id='0' type='CPU'>
16:32:24: <cpus v='6'/>
16:32:24: <paused v='true'/>
16:32:24: </slot>
16:32:24: <slot id='1' type='GPU'>
16:32:24: <paused v='true'/>
16:32:24: </slot>
16:32:24: <slot id='2' type='GPU'>
16:32:24: <paused v='true'/>
16:32:24: </slot>
16:32:24:</config>
16:32:24:Trying to access database...
16:32:24:Successfully acquired database lock
16:32:24:Enabled folding slot 00: PAUSED cpu:6 (by user)
16:32:24:Enabled folding slot 01: PAUSED gpu:0:GK106 [GeForce GTX 660] (by user)
16:32:24:Enabled folding slot 02: PAUSED gpu:1:GK106 [GeForce GTX 660] (by user)
16:33:30:FS00:Unpaused
16:33:30:FS01:Unpaused
16:33:30:FS02:Unpaused
16:33:30:WU00:FS00:Starting
16:33:30:WU00:FS00:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/Cor$
16:33:30:WU00:FS00:Started FahCore on PID 4359
16:33:30:WU00:FS00:Core PID:4363
16:33:30:WU00:FS00:FahCore 0xa3 started
16:33:30:WU02:FS02:Starting
16:33:30:WU02:FS02:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:33:30:WU02:FS02:Started FahCore on PID 4364
16:33:30:WU02:FS02:Core PID:4368
16:33:30:WU02:FS02:FahCore 0x17 started
16:33:30:WU01:FS01:Starting
16:33:30:WU01:FS01:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:33:30:WU01:FS01:Started FahCore on PID 4369
16:33:30:WU01:FS01:Core PID:4373
16:33:30:WU01:FS01:FahCore 0x17 started
16:33:30:WU00:FS00:0xa3:
16:33:30:WU00:FS00:0xa3:*------------------------------*
16:33:30:WU00:FS00:0xa3:Folding@Home Gromacs SMP Core
16:33:30:WU00:FS00:0xa3:Version 2.27 (Dec. 15, 2010)
16:33:30:WU00:FS00:0xa3:
16:33:30:WU00:FS00:0xa3:Preparing to commence simulation
16:33:30:WU00:FS00:0xa3:- Looking at optimizations...
16:33:30:WU00:FS00:0xa3:- Files status OK
16:33:30:WU00:FS00:0xa3:- Expanded 1764577 -> 2700840 (decompressed 153.0 percent)
16:33:30:WU00:FS00:0xa3:Called DecompressByteArray: compressed_data_size=1764577 data_size=2700840, decompressed_d$
16:33:30:WU00:FS00:0xa3:- Digital signature verified
16:33:30:WU00:FS00:0xa3:
16:33:30:WU00:FS00:0xa3:Project: 7504 (Run 6, Clone 5, Gen 422)
16:33:30:WU00:FS00:0xa3:
16:33:30:WU00:FS00:0xa3:Assembly optimizations on if available.
16:33:30:WU00:FS00:0xa3:Entering M.D.
16:33:30:WU02:FS02:0x17:*********************** Log Started 2014-08-06T16:33:30Z ***********************
16:33:30:WU02:FS02:0x17:Project: 9201 (Run 109, Clone 1, Gen 17)
16:33:30:WU02:FS02:0x17:Unit: 0x000000276652edc45399da4ebe182411
16:33:30:WU02:FS02:0x17:CPU: 0x00000000000000000000000000000000
16:33:30:WU02:FS02:0x17:Machine: 2
16:33:30:WU02:FS02:0x17:Reading tar file state.xml
16:33:30:WU02:FS02:0x17:Reading tar file system.xml
16:33:30:WU02:FS02:0x17:Reading tar file integrator.xml
16:33:30:WU02:FS02:0x17:Reading tar file core.xml
16:33:30:WU02:FS02:0x17:Digital signatures verified
16:33:30:WU02:FS02:0x17:ERROR:exception: Bad platformId size.
16:33:30:WU02:FS02:0x17:Saving result file logfile_01.txt
16:33:30:WU02:FS02:0x17:Saving result file log.txt
16:33:30:WU02:FS02:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
16:33:30:WU01:FS01:0x17:*********************** Log Started 2014-08-06T16:33:30Z ***********************
16:33:30:WU01:FS01:0x17:Project: 9201 (Run 327, Clone 1, Gen 17)
16:33:30:WU01:FS01:0x17:Unit: 0x000000266652edc45399e2e8ead36e7a
16:33:30:WU01:FS01:0x17:CPU: 0x00000000000000000000000000000000
16:33:30:WU01:FS01:0x17:Machine: 1
16:33:30:WU01:FS01:0x17:Reading tar file state.xml
16:33:30:WU01:FS01:0x17:Reading tar file system.xml
16:33:30:WU01:FS01:0x17:Reading tar file integrator.xml
16:33:30:WU01:FS01:0x17:Reading tar file core.xml
16:33:30:WU01:FS01:0x17:Digital signatures verified
16:33:30:WU01:FS01:0x17:ERROR:exception: Bad platformId size.
16:33:30:WU01:FS01:0x17:Saving result file logfile_01.txt
16:33:30:WU01:FS01:0x17:Saving result file log.txt
16:33:30:WU01:FS01:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
^[[93m16:33:31:WARNING:WU02:FS02:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:33:31:WU02:FS02:Sending unit results: id:02 state:SEND error:FAULTY project:9201 run:109 clone:1 gen:17 core:0x$
16:33:31:WU02:FS02:Uploading 1.85KiB to 171.67.108.52
16:33:31:WU02:FS02:Connecting to 171.67.108.52:8080
^[[93m16:33:31:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:33:31:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9201 run:327 clone:1 gen:17 core:0x$
16:33:31:WU01:FS01:Uploading 1.86KiB to 171.67.108.52
16:33:31:WU01:FS01:Connecting to 171.67.108.52:8080
16:33:31:WU02:FS02:Upload complete
16:33:31:WU01:FS01:Upload complete
16:33:31:WU02:FS02:Server responded WORK_ACK (400)
16:33:31:WU02:FS02:Cleaning up
16:33:31:WU03:FS01:Connecting to 171.67.108.201:80
16:33:31:WU01:FS01:Server responded WORK_ACK (400)
16:33:31:WU01:FS01:Cleaning up
16:33:31:WU04:FS02:Connecting to 171.67.108.201:80
16:33:32:WU03:FS01:Assigned to work server 171.67.108.52
16:33:32:WU03:FS01:Requesting new work unit for slot 01: READY gpu:0:GK106 [GeForce GTX 660] from 171.67.108.52
16:33:32:WU03:FS01:Connecting to 171.67.108.52:8080
16:33:32:WU04:FS02:Assigned to work server 171.67.108.52
16:33:32:WU04:FS02:Requesting new work unit for slot 02: READY gpu:1:GK106 [GeForce GTX 660] from 171.67.108.52
16:33:32:WU04:FS02:Connecting to 171.67.108.52:8080
16:33:32:WU04:FS02:Downloading 1.53MiB
16:33:32:WU03:FS01:Downloading 1.52MiB
16:33:36:WU03:FS01:Download complete
16:33:36:WU03:FS01:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:9201 run:524 clone:1 gen:29 core:0x1$
16:33:36:WU03:FS01:Starting
16:33:36:WU03:FS01:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:33:36:WU03:FS01:Started FahCore on PID 4381
16:33:36:WU03:FS01:Core PID:4385
16:33:36:WU03:FS01:FahCore 0x17 started
16:33:36:WU00:FS00:0xa3:Mapping NT from 6 to 6
16:33:36:WU00:FS00:0xa3:Completed 0 out of 500000 steps (0%)
^[[93m16:33:36:WARNING:WU03:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:33:36:WU03:FS01:Sending unit results: id:03 state:SEND error:FAULTY project:9201 run:524 clone:1 gen:29 core:0x$
16:33:36:WU03:FS01:Uploading 1.85KiB to 171.67.108.52
16:33:36:WU03:FS01:Connecting to 171.67.108.52:8080
16:33:37:WU01:FS01:Connecting to 171.67.108.201:80
16:33:37:WU03:FS01:Upload complete
16:33:37:WU03:FS01:Server responded WORK_ACK (400)
16:33:37:WU03:FS01:Cleaning up
16:33:37:WU01:FS01:Assigned to work server 171.67.108.52
16:33:37:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GK106 [GeForce GTX 660] from 171.67.108.52
16:33:37:WU01:FS01:Connecting to 171.67.108.52:8080
16:33:37:WU04:FS02:Download complete
16:33:38:WU04:FS02:Received Unit: id:04 state:DOWNLOAD error:NO_ERROR project:9201 run:726 clone:1 gen:28 core:0x1$
16:33:38:WU04:FS02:Starting
16:33:38:WU04:FS02:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:33:38:WU04:FS02:Started FahCore on PID 4393
16:33:38:WU04:FS02:Core PID:4397
16:33:38:WU04:FS02:FahCore 0x17 started
16:33:38:WU01:FS01:Downloading 1.52MiB
16:33:38:WU04:FS02:0x17:*********************** Log Started 2014-08-06T16:33:38Z ***********************
16:33:38:WU04:FS02:0x17:Project: 9201 (Run 726, Clone 1, Gen 28)
16:33:38:WU04:FS02:0x17:Unit: 0x000000346652edc45399f2956170fb92
16:33:38:WU04:FS02:0x17:CPU: 0x00000000000000000000000000000000
16:33:38:WU04:FS02:0x17:Machine: 2
16:33:38:WU04:FS02:0x17:Reading tar file state.xml
16:33:38:WU04:FS02:0x17:Reading tar file system.xml
16:33:38:WU04:FS02:0x17:Reading tar file integrator.xml
16:33:38:WU04:FS02:0x17:Reading tar file core.xml
16:33:38:WU04:FS02:0x17:Digital signatures verified
16:33:38:WU04:FS02:0x17:ERROR:exception: Bad platformId size.
16:33:38:WU04:FS02:0x17:Saving result file logfile_01.txt
16:33:38:WU04:FS02:0x17:Saving result file log.txt
16:33:38:WU04:FS02:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
^[[93m16:33:38:WARNING:WU04:FS02:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:33:38:WU04:FS02:Sending unit results: id:04 state:SEND error:FAULTY project:9201 run:726 clone:1 gen:28 core:0x$
16:33:38:WU04:FS02:Uploading 1.85KiB to 171.67.108.52
16:33:38:WU04:FS02:Connecting to 171.67.108.52:8080
16:33:39:WU02:FS02:Connecting to 171.67.108.201:80
16:33:39:WU04:FS02:Upload complete
16:33:39:WU04:FS02:Server responded WORK_ACK (400)
16:33:39:WU04:FS02:Cleaning up
16:33:39:WU02:FS02:Assigned to work server 171.67.108.52
16:33:39:WU02:FS02:Requesting new work unit for slot 02: READY gpu:1:GK106 [GeForce GTX 660] from 171.67.108.52
16:33:39:WU02:FS02:Connecting to 171.67.108.52:8080
16:33:40:WU02:FS02:Downloading 1.52MiB
16:33:42:WU01:FS01:Download complete
16:33:42:WU01:FS01:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:9201 run:446 clone:1 gen:27 core:0x1$
16:33:42:WU01:FS01:Starting
16:33:42:WU01:FS01:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:33:42:WU01:FS01:Started FahCore on PID 4400
16:33:42:WU01:FS01:Core PID:4404
16:33:42:WU01:FS01:FahCore 0x17 started
16:33:43:WU01:FS01:0x17:*********************** Log Started 2014-08-06T16:33:42Z ***********************
16:33:43:WU01:FS01:0x17:Project: 9201 (Run 446, Clone 1, Gen 27)
16:33:43:WU01:FS01:0x17:Unit: 0x000000366652edc45399e792cfb36ba5
16:33:43:WU01:FS01:0x17:CPU: 0x00000000000000000000000000000000
16:33:43:WU01:FS01:0x17:Machine: 1
16:33:43:WU01:FS01:0x17:Reading tar file state.xml
16:33:43:WU01:FS01:0x17:Reading tar file system.xml
16:33:43:WU01:FS01:0x17:Reading tar file integrator.xml
16:33:43:WU01:FS01:0x17:Reading tar file core.xml
16:33:43:WU01:FS01:0x17:Digital signatures verified
16:33:43:WU01:FS01:0x17:ERROR:exception: Bad platformId size.
16:33:43:WU01:FS01:0x17:Saving result file logfile_01.txt
16:33:43:WU01:FS01:0x17:Saving result file log.txt
16:33:43:WU01:FS01:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
^[[93m16:33:43:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:33:43:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9201 run:446 clone:1 gen:27 core:0x$
16:33:43:WU01:FS01:Uploading 1.84KiB to 171.67.108.52
16:33:43:WU01:FS01:Connecting to 171.67.108.52:8080
16:33:43:WU03:FS01:Connecting to 171.67.108.201:80
16:33:43:WU01:FS01:Upload complete
16:33:43:WU01:FS01:Server responded WORK_ACK (400)
16:33:43:WU01:FS01:Cleaning up
16:33:44:WU03:FS01:Assigned to work server 171.67.108.52
16:33:44:WU03:FS01:Requesting new work unit for slot 01: READY gpu:0:GK106 [GeForce GTX 660] from 171.67.108.52
16:33:44:WU03:FS01:Connecting to 171.67.108.52:8080
16:33:44:WU03:FS01:Downloading 1.53MiB
16:33:46:WU02:FS02:Download 90.33%
16:33:47:WU02:FS02:Download complete
16:33:47:WU02:FS02:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:9201 run:455 clone:1 gen:27 core:0x1$
16:33:47:WU02:FS02:Starting
16:33:47:WU02:FS02:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:33:47:WU02:FS02:Started FahCore on PID 4407
16:33:47:WU02:FS02:Core PID:4411
16:33:47:WU02:FS02:FahCore 0x17 started
16:33:47:WU02:FS02:0x17:*********************** Log Started 2014-08-06T16:33:47Z ***********************
16:33:47:WU02:FS02:0x17:Project: 9201 (Run 455, Clone 1, Gen 27)
16:33:47:WU02:FS02:0x17:Unit: 0x000000376652edc45399e7edce1a5b74
16:33:47:WU02:FS02:0x17:CPU: 0x00000000000000000000000000000000
16:33:47:WU02:FS02:0x17:Machine: 2
16:33:47:WU02:FS02:0x17:Reading tar file state.xml
16:33:47:WU02:FS02:0x17:Reading tar file system.xml
16:33:47:WU02:FS02:0x17:Reading tar file integrator.xml
16:33:47:WU02:FS02:0x17:Reading tar file core.xml
16:33:47:WU02:FS02:0x17:Digital signatures verified
16:33:47:WU02:FS02:0x17:ERROR:exception: Bad platformId size.
16:33:47:WU02:FS02:0x17:Saving result file logfile_01.txt
16:33:47:WU02:FS02:0x17:Saving result file log.txt
16:33:47:WU02:FS02:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
16:33:47:WU03:FS01:Download complete
^[[93m16:33:47:WARNING:WU02:FS02:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:33:47:WU02:FS02:Sending unit results: id:02 state:SEND error:FAULTY project:9201 run:455 clone:1 gen:27 core:0x$
16:33:47:WU02:FS02:Uploading 1.85KiB to 171.67.108.52
16:33:47:WU02:FS02:Connecting to 171.67.108.52:8080
16:33:47:WU03:FS01:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:9201 run:713 clone:1 gen:27 core:0x1$
16:33:47:WU03:FS01:Starting
16:33:47:WU03:FS01:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:33:47:WU03:FS01:Started FahCore on PID 4414
16:33:47:WU03:FS01:Core PID:4418
16:33:47:WU03:FS01:FahCore 0x17 started
16:33:48:WU01:FS02:Connecting to 171.67.108.201:80
16:33:48:WU02:FS02:Upload complete
16:33:48:WU02:FS02:Server responded WORK_ACK (400)
16:33:48:WU02:FS02:Cleaning up
16:33:48:WU03:FS01:0x17:*********************** Log Started 2014-08-06T16:33:47Z ***********************
16:33:48:WU03:FS01:0x17:Project: 9201 (Run 713, Clone 1, Gen 27)
16:33:48:WU03:FS01:0x17:Unit: 0x0000002f6652edc45399f2124ad3e047
16:33:48:WU03:FS01:0x17:CPU: 0x00000000000000000000000000000000
16:33:48:WU03:FS01:0x17:Machine: 1
16:33:48:WU03:FS01:0x17:Reading tar file state.xml
16:33:48:WU03:FS01:0x17:Reading tar file system.xml
16:33:48:WU03:FS01:0x17:Reading tar file integrator.xml
16:33:48:WU03:FS01:0x17:Reading tar file core.xml
16:33:48:WU03:FS01:0x17:Digital signatures verified
16:33:48:WU03:FS01:0x17:ERROR:exception: Bad platformId size.
16:33:48:WU03:FS01:0x17:Saving result file logfile_01.txt
16:33:48:WU03:FS01:0x17:Saving result file log.txt
16:33:48:WU03:FS01:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
^[[93m16:33:48:WARNING:WU03:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:33:48:WU03:FS01:Sending unit results: id:03 state:SEND error:FAULTY project:9201 run:713 clone:1 gen:27 core:0x$
16:33:48:WU01:FS02:Assigned to work server 171.67.108.52
16:33:48:WU01:FS02:Requesting new work unit for slot 02: READY gpu:1:GK106 [GeForce GTX 660] from 171.67.108.52
16:33:48:WU01:FS02:Connecting to 171.67.108.52:8080
16:33:48:WU03:FS01:Uploading 1.85KiB to 171.67.108.52
16:33:48:WU03:FS01:Connecting to 171.67.108.52:8080
16:33:48:WU02:FS01:Connecting to 171.67.108.201:80
16:33:49:WU01:FS02:Downloading 1.53MiB
16:33:49:WU03:FS01:Upload complete
16:33:49:WU03:FS01:Server responded WORK_ACK (400)
16:33:49:WU03:FS01:Cleaning up
16:33:49:WU02:FS01:Assigned to work server 171.67.108.52
16:33:49:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GK106 [GeForce GTX 660] from 171.67.108.52
16:33:49:WU02:FS01:Connecting to 171.67.108.52:8080
16:33:50:WU02:FS01:Downloading 1.52MiB
16:33:55:WU01:FS02:Download 100.00%
16:33:55:WU01:FS02:Download complete
16:33:55:WU01:FS02:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:9201 run:841 clone:1 gen:27 core:0x1$
16:33:55:WU01:FS02:Starting
16:33:55:WU01:FS02:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:33:55:WU01:FS02:Started FahCore on PID 4421
16:33:55:WU01:FS02:Core PID:4425
16:33:55:WU01:FS02:FahCore 0x17 started
16:33:55:WU01:FS02:0x17:*********************** Log Started 2014-08-06T16:33:55Z ***********************
16:33:55:WU01:FS02:0x17:Project: 9201 (Run 841, Clone 1, Gen 27)
16:33:55:WU01:FS02:0x17:Unit: 0x000000376652edc45399f7194f95aab8
16:33:55:WU01:FS02:0x17:CPU: 0x00000000000000000000000000000000
16:33:55:WU01:FS02:0x17:Machine: 2
16:33:55:WU01:FS02:0x17:Reading tar file state.xml
16:33:55:WU01:FS02:0x17:Reading tar file system.xml
16:33:55:WU01:FS02:0x17:Reading tar file integrator.xml
16:33:55:WU01:FS02:0x17:Reading tar file core.xml
16:33:55:WU01:FS02:0x17:Digital signatures verified
16:33:55:WU01:FS02:0x17:ERROR:exception: Bad platformId size.
16:33:55:WU01:FS02:0x17:Saving result file logfile_01.txt
16:33:55:WU01:FS02:0x17:Saving result file log.txt
16:33:55:WU01:FS02:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
^[[93m16:33:55:WARNING:WU01:FS02:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:33:55:WU01:FS02:Sending unit results: id:01 state:SEND error:FAULTY project:9201 run:841 clone:1 gen:27 core:0x$
16:33:55:WU01:FS02:Uploading 1.85KiB to 171.67.108.52
16:33:55:WU01:FS02:Connecting to 171.67.108.52:8080
16:33:56:WU03:FS02:Connecting to 171.67.108.201:80
16:33:56:WU01:FS02:Upload complete
16:33:56:WU01:FS02:Server responded WORK_ACK (400)
16:33:56:WU01:FS02:Cleaning up
16:33:56:WU02:FS01:Download 100.00%
16:33:56:WU02:FS01:Download complete
16:33:56:WU02:FS01:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:9201 run:728 clone:1 gen:26 core:0x1$
16:33:56:WU02:FS01:Starting
16:33:56:WU02:FS01:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:33:56:WU02:FS01:Started FahCore on PID 4428
16:33:56:WU02:FS01:Core PID:4432
16:33:56:WU02:FS01:FahCore 0x17 started
16:33:57:WU02:FS01:0x17:*********************** Log Started 2014-08-06T16:33:56Z ***********************
16:33:57:WU02:FS01:0x17:Project: 9201 (Run 728, Clone 1, Gen 26)
16:33:57:WU02:FS01:0x17:Unit: 0x000000376652edc45399f2a9bc9d6f2b
16:33:57:WU02:FS01:0x17:CPU: 0x00000000000000000000000000000000
16:33:57:WU02:FS01:0x17:Machine: 1
16:33:57:WU02:FS01:0x17:Reading tar file state.xml
16:33:57:WU02:FS01:0x17:Reading tar file system.xml
16:33:57:WU02:FS01:0x17:Reading tar file integrator.xml
16:33:57:WU02:FS01:0x17:Reading tar file core.xml
16:33:57:WU02:FS01:0x17:Digital signatures verified
16:33:57:WU02:FS01:0x17:ERROR:exception: Bad platformId size.
16:33:57:WU02:FS01:0x17:Saving result file logfile_01.txt
16:33:57:WU02:FS01:0x17:Saving result file log.txt
16:33:57:WU02:FS01:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
16:33:57:WU03:FS02:Assigned to work server 171.67.108.52
16:33:57:WU03:FS02:Requesting new work unit for slot 02: READY gpu:1:GK106 [GeForce GTX 660] from 171.67.108.52
16:33:57:WU03:FS02:Connecting to 171.67.108.52:8080
^[[93m16:33:57:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:33:57:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9201 run:728 clone:1 gen:26 core:0x$
16:33:57:WU02:FS01:Uploading 1.85KiB to 171.67.108.52
16:33:57:WU02:FS01:Connecting to 171.67.108.52:8080
16:33:57:WU03:FS02:Downloading 1.52MiB
16:33:57:WU01:FS01:Connecting to 171.67.108.201:80
16:33:57:WU02:FS01:Upload complete
16:33:57:WU02:FS01:Server responded WORK_ACK (400)
16:33:57:WU02:FS01:Cleaning up
16:33:58:WU01:FS01:Assigned to work server 171.67.108.52
16:33:58:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GK106 [GeForce GTX 660] from 171.67.108.52
16:33:58:WU01:FS01:Connecting to 171.67.108.52:8080
16:33:58:WU01:FS01:Downloading 1.52MiB
16:34:02:WU01:FS01:Download complete
16:34:02:WU01:FS01:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:9201 run:974 clone:0 gen:25 core:0x1$
16:34:02:WU01:FS01:Starting
16:34:02:WU01:FS01:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:34:02:WU01:FS01:Started FahCore on PID 4435
16:34:02:WU01:FS01:Core PID:4439
16:34:02:WU01:FS01:FahCore 0x17 started
16:34:03:WU03:FS02:Download 94.29%
16:34:03:WU01:FS01:0x17:*********************** Log Started 2014-08-06T16:34:02Z ***********************
16:34:03:WU01:FS01:0x17:Project: 9201 (Run 974, Clone 0, Gen 25)
16:34:03:WU01:FS01:0x17:Unit: 0x000000376652edc45399fc52486ce112
16:34:03:WU01:FS01:0x17:CPU: 0x00000000000000000000000000000000
16:34:03:WU01:FS01:0x17:Machine: 1
16:34:03:WU01:FS01:0x17:Reading tar file state.xml
16:34:03:WU01:FS01:0x17:Reading tar file system.xml
16:34:03:WU01:FS01:0x17:Reading tar file integrator.xml
16:34:03:WU01:FS01:0x17:Reading tar file core.xml
16:34:03:WU01:FS01:0x17:Digital signatures verified
16:34:03:WU01:FS01:0x17:ERROR:exception: Bad platformId size.
16:34:03:WU01:FS01:0x17:Saving result file logfile_01.txt
16:34:03:WU01:FS01:0x17:Saving result file log.txt
16:34:03:WU01:FS01:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
16:34:03:WU03:FS02:Download complete
^[[93m16:34:03:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:34:03:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9201 run:974 clone:0 gen:25 core:0x$
16:34:03:WU01:FS01:Uploading 1.84KiB to 171.67.108.52
16:34:03:WU03:FS02:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:9201 run:795 clone:1 gen:26 core:0x1$
16:34:03:WU01:FS01:Connecting to 171.67.108.52:8080
16:34:03:WU03:FS02:Starting
16:34:03:WU03:FS02:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:34:03:WU03:FS02:Started FahCore on PID 4442
16:34:03:WU03:FS02:Core PID:4446
16:34:03:WU03:FS02:FahCore 0x17 started
16:34:03:WU02:FS01:Connecting to 171.67.108.201:80
16:34:03:WU01:FS01:Upload complete
16:34:04:WU01:FS01:Server responded WORK_ACK (400)
16:34:04:WU01:FS01:Cleaning up
16:34:04:WU03:FS02:0x17:*********************** Log Started 2014-08-06T16:34:03Z ***********************
16:34:04:WU03:FS02:0x17:Project: 9201 (Run 795, Clone 1, Gen 26)
16:34:04:WU03:FS02:0x17:Unit: 0x0000002d6652edc45399f54cdd3c57d8
16:34:04:WU03:FS02:0x17:CPU: 0x00000000000000000000000000000000
16:34:04:WU03:FS02:0x17:Machine: 2
16:34:04:WU03:FS02:0x17:Reading tar file state.xml
16:34:04:WU03:FS02:0x17:Reading tar file system.xml
16:34:04:WU03:FS02:0x17:Reading tar file integrator.xml
16:34:04:WU03:FS02:0x17:Reading tar file core.xml
16:34:04:WU03:FS02:0x17:Digital signatures verified
16:34:04:WU03:FS02:0x17:ERROR:exception: Bad platformId size.
16:34:04:WU03:FS02:0x17:Saving result file logfile_01.txt
16:34:04:WU03:FS02:0x17:Saving result file log.txt
16:34:04:WU03:FS02:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
^[[93m16:34:04:WARNING:WU03:FS02:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:34:04:WU03:FS02:Sending unit results: id:03 state:SEND error:FAULTY project:9201 run:795 clone:1 gen:26 core:0x$
16:34:04:WU03:FS02:Uploading 1.84KiB to 171.67.108.52
16:34:04:WU02:FS01:Assigned to work server 171.67.108.52
16:34:04:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GK106 [GeForce GTX 660] from 171.67.108.52
16:34:04:WU02:FS01:Connecting to 171.67.108.52:8080
16:34:04:WU03:FS02:Connecting to 171.67.108.52:8080
16:34:04:WU01:FS02:Connecting to 171.67.108.201:80
16:34:04:WU02:FS01:Downloading 1.52MiB
16:34:04:WU03:FS02:Upload complete
16:34:04:WU03:FS02:Server responded WORK_ACK (400)
16:34:04:WU03:FS02:Cleaning up
16:34:05:WU01:FS02:Assigned to work server 171.67.108.52
16:34:05:WU01:FS02:Requesting new work unit for slot 02: READY gpu:1:GK106 [GeForce GTX 660] from 171.67.108.52
16:34:05:WU01:FS02:Connecting to 171.67.108.52:8080
16:34:05:WU01:FS02:Downloading 1.52MiB
16:34:09:WU01:FS02:Download complete
16:34:09:WU02:FS01:Download complete
16:34:09:WU01:FS02:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:9201 run:168 clone:1 gen:32 core:0x1$
16:34:09:WU01:FS02:Starting
16:34:09:WU01:FS02:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:34:09:WU01:FS02:Started FahCore on PID 4458
16:34:09:WU01:FS02:Core PID:4462
16:34:09:WU01:FS02:FahCore 0x17 started
16:34:09:WU02:FS01:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:9201 run:548 clone:1 gen:27 core:0x1$
16:34:09:WU02:FS01:Starting
16:34:09:WU02:FS01:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:34:09:WU02:FS01:Started FahCore on PID 4465
16:34:09:WU02:FS01:Core PID:4469
16:34:09:WU02:FS01:FahCore 0x17 started
16:34:09:WU01:FS02:0x17:*********************** Log Started 2014-08-06T16:34:09Z ***********************
16:34:09:WU01:FS02:0x17:Project: 9201 (Run 168, Clone 1, Gen 32)
16:34:09:WU01:FS02:0x17:Unit: 0x000000386652edc45399dc9d3bc9a3e4
16:34:09:WU01:FS02:0x17:CPU: 0x00000000000000000000000000000000
16:34:09:WU01:FS02:0x17:Machine: 2
16:34:09:WU01:FS02:0x17:Reading tar file state.xml
16:34:09:WU01:FS02:0x17:Reading tar file system.xml
16:34:09:WU01:FS02:0x17:Reading tar file integrator.xml
16:34:09:WU01:FS02:0x17:Reading tar file core.xml
16:34:09:WU01:FS02:0x17:Digital signatures verified
16:34:09:WU01:FS02:0x17:ERROR:exception: Bad platformId size.
16:34:09:WU01:FS02:0x17:Saving result file logfile_01.txt
16:34:09:WU01:FS02:0x17:Saving result file log.txt
16:34:09:WU01:FS02:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
16:34:10:WU02:FS01:0x17:*********************** Log Started 2014-08-06T16:34:09Z ***********************
16:34:10:WU02:FS01:0x17:Project: 9201 (Run 548, Clone 1, Gen 27)
16:34:10:WU02:FS01:0x17:Unit: 0x000000346652edc45399eb92419af4d7
16:34:10:WU02:FS01:0x17:CPU: 0x00000000000000000000000000000000
16:34:10:WU02:FS01:0x17:Machine: 1
16:34:10:WU02:FS01:0x17:Reading tar file state.xml
16:34:10:WU02:FS01:0x17:Reading tar file system.xml
16:34:10:WU02:FS01:0x17:Reading tar file integrator.xml
16:34:10:WU02:FS01:0x17:Reading tar file core.xml
16:34:10:WU02:FS01:0x17:Digital signatures verified
16:34:10:WU02:FS01:0x17:ERROR:exception: Bad platformId size.
16:34:10:WU02:FS01:0x17:Saving result file logfile_01.txt
16:34:10:WU02:FS01:0x17:Saving result file log.txt
16:34:10:WU02:FS01:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
^[[93m16:34:10:WARNING:WU01:FS02:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:34:10:WU01:FS02:Sending unit results: id:01 state:SEND error:FAULTY project:9201 run:168 clone:1 gen:32 core:0x$
16:34:10:WU01:FS02:Uploading 1.85KiB to 171.67.108.52
16:34:10:WU01:FS02:Connecting to 171.67.108.52:8080
^[[93m16:34:10:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:34:10:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9201 run:548 clone:1 gen:27 core:0x$
16:34:10:WU02:FS01:Uploading 1.85KiB to 171.67.108.52
16:34:10:WU02:FS01:Connecting to 171.67.108.52:8080
16:34:10:WU01:FS02:Upload complete
16:34:10:WU03:FS01:Connecting to 171.67.108.201:80
16:34:10:WU01:FS02:Server responded WORK_ACK (400)
16:34:10:WU01:FS02:Cleaning up
16:34:10:WU04:FS02:Connecting to 171.67.108.201:80
16:34:10:WU02:FS01:Upload complete
16:34:10:WU02:FS01:Server responded WORK_ACK (400)
16:34:10:WU02:FS01:Cleaning up
16:34:11:WU03:FS01:Assigned to work server 171.67.108.52
16:34:11:WU03:FS01:Requesting new work unit for slot 01: READY gpu:0:GK106 [GeForce GTX 660] from 171.67.108.52
16:34:11:WU03:FS01:Connecting to 171.67.108.52:8080
16:34:11:WU04:FS02:Assigned to work server 171.67.108.52
16:34:11:WU04:FS02:Requesting new work unit for slot 02: READY gpu:1:GK106 [GeForce GTX 660] from 171.67.108.52
16:34:11:WU04:FS02:Connecting to 171.67.108.52:8080
16:34:11:WU03:FS01:Downloading 1.53MiB
16:34:11:WU04:FS02:Downloading 1.52MiB
16:34:14:WU04:FS02:Download complete
16:34:14:WU04:FS02:Received Unit: id:04 state:DOWNLOAD error:NO_ERROR project:9201 run:382 clone:1 gen:25 core:0x1$
16:34:14:WU04:FS02:Starting
16:34:14:WU04:FS02:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:34:14:WU04:FS02:Started FahCore on PID 4472
16:34:14:WU04:FS02:Core PID:4476
16:34:14:WU04:FS02:FahCore 0x17 started
16:34:14:WU04:FS02:0x17:*********************** Log Started 2014-08-06T16:34:14Z ***********************
16:34:14:WU04:FS02:0x17:Project: 9201 (Run 382, Clone 1, Gen 25)
16:34:14:WU04:FS02:0x17:Unit: 0x0000002c6652edc45399e510bd14bd79
16:34:14:WU04:FS02:0x17:CPU: 0x00000000000000000000000000000000
16:34:14:WU04:FS02:0x17:Machine: 2
16:34:14:WU04:FS02:0x17:Reading tar file state.xml
16:34:14:WU04:FS02:0x17:Reading tar file system.xml
16:34:14:WU04:FS02:0x17:Reading tar file integrator.xml
16:34:14:WU04:FS02:0x17:Reading tar file core.xml
16:34:14:WU04:FS02:0x17:Digital signatures verified
16:34:14:WU04:FS02:0x17:ERROR:exception: Bad platformId size.
16:34:14:WU04:FS02:0x17:Saving result file logfile_01.txt
16:34:14:WU04:FS02:0x17:Saving result file log.txt
16:34:14:WU04:FS02:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
^[[93m16:34:15:WARNING:WU04:FS02:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:34:15:WU04:FS02:Sending unit results: id:04 state:SEND error:FAULTY project:9201 run:382 clone:1 gen:25 core:0x$
16:34:15:WU04:FS02:Uploading 1.85KiB to 171.67.108.52
16:34:15:WU04:FS02:Connecting to 171.67.108.52:8080
16:34:15:WU01:FS02:Connecting to 171.67.108.201:80
16:34:15:WU04:FS02:Upload complete
16:34:15:WU04:FS02:Server responded WORK_ACK (400)
16:34:15:WU04:FS02:Cleaning up
16:34:15:WU01:FS02:Assigned to work server 171.67.108.52
16:34:15:WU01:FS02:Requesting new work unit for slot 02: READY gpu:1:GK106 [GeForce GTX 660] from 171.67.108.52
16:34:15:WU01:FS02:Connecting to 171.67.108.52:8080
16:34:16:WU03:FS01:Download complete
16:34:16:WU01:FS02:Downloading 1.52MiB
16:34:16:WU03:FS01:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:9201 run:250 clone:1 gen:25 core:0x1$
16:34:16:WU03:FS01:Starting
16:34:16:WU03:FS01:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:34:16:WU03:FS01:Started FahCore on PID 4479
16:34:16:WU03:FS01:Core PID:4483
16:34:16:WU03:FS01:FahCore 0x17 started
16:34:16:WU03:FS01:0x17:*********************** Log Started 2014-08-06T16:34:16Z ***********************
16:34:16:WU03:FS01:0x17:Project: 9201 (Run 250, Clone 1, Gen 25)
16:34:16:WU03:FS01:0x17:Unit: 0x000000366652edc45399dfd75c816fe4
16:34:16:WU03:FS01:0x17:CPU: 0x00000000000000000000000000000000
16:34:16:WU03:FS01:0x17:Machine: 1
16:34:16:WU03:FS01:0x17:Reading tar file state.xml
16:34:16:WU03:FS01:0x17:Reading tar file system.xml
16:34:16:WU03:FS01:0x17:Reading tar file integrator.xml
16:34:16:WU03:FS01:0x17:Reading tar file core.xml
16:34:16:WU03:FS01:0x17:Digital signatures verified
16:34:16:WU03:FS01:0x17:ERROR:exception: Bad platformId size.
16:34:16:WU03:FS01:0x17:Saving result file logfile_01.txt
16:34:16:WU03:FS01:0x17:Saving result file log.txt
16:34:16:WU03:FS01:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
^[[93m16:34:17:WARNING:WU03:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:34:17:WU03:FS01:Sending unit results: id:03 state:SEND error:FAULTY project:9201 run:250 clone:1 gen:25 core:0x$
16:34:17:WU03:FS01:Uploading 1.85KiB to 171.67.108.52
16:34:17:WU03:FS01:Connecting to 171.67.108.52:8080
16:34:17:WU02:FS01:Connecting to 171.67.108.201:80
16:34:17:WU03:FS01:Upload complete
16:34:17:WU03:FS01:Server responded WORK_ACK (400)
16:34:17:WU03:FS01:Cleaning up
16:34:17:WU02:FS01:Assigned to work server 171.67.108.52
16:34:17:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GK106 [GeForce GTX 660] from 171.67.108.52
16:34:17:WU02:FS01:Connecting to 171.67.108.52:8080
16:34:18:WU02:FS01:Downloading 1.52MiB
16:34:21:WU01:FS02:Download complete
16:34:21:WU01:FS02:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:9201 run:394 clone:1 gen:25 core:0x1$
16:34:21:WU01:FS02:Starting
16:34:21:WU01:FS02:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:34:21:WU01:FS02:Started FahCore on PID 4486
16:34:21:WU01:FS02:Core PID:4490
16:34:21:WU01:FS02:FahCore 0x17 started
16:34:21:WU01:FS02:0x17:*********************** Log Started 2014-08-06T16:34:21Z ***********************
16:34:21:WU01:FS02:0x17:Project: 9201 (Run 394, Clone 1, Gen 25)
16:34:21:WU01:FS02:0x17:Unit: 0x000000306652edc45399e589298f2699
16:34:21:WU01:FS02:0x17:CPU: 0x00000000000000000000000000000000
16:34:21:WU01:FS02:0x17:Machine: 2
16:34:21:WU01:FS02:0x17:Reading tar file state.xml
16:34:21:WU01:FS02:0x17:Reading tar file system.xml
16:34:21:WU01:FS02:0x17:Reading tar file integrator.xml
16:34:21:WU01:FS02:0x17:Reading tar file core.xml
16:34:21:WU01:FS02:0x17:Digital signatures verified
16:34:21:WU01:FS02:0x17:ERROR:exception: Bad platformId size.
16:34:21:WU01:FS02:0x17:Saving result file logfile_01.txt
16:34:21:WU01:FS02:0x17:Saving result file log.txt
16:34:21:WU01:FS02:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
^[[93m16:34:22:WARNING:WU01:FS02:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:34:22:WU01:FS02:Sending unit results: id:01 state:SEND error:FAULTY project:9201 run:394 clone:1 gen:25 core:0x$
16:34:22:WU01:FS02:Uploading 1.85KiB to 171.67.108.52
16:34:22:WU01:FS02:Connecting to 171.67.108.52:8080
16:34:22:WU03:FS02:Connecting to 171.67.108.201:80
16:34:22:WU01:FS02:Upload complete
16:34:22:WU01:FS02:Server responded WORK_ACK (400)
16:34:22:WU01:FS02:Cleaning up
16:34:22:WU03:FS02:Assigned to work server 171.67.108.52
16:34:22:WU03:FS02:Requesting new work unit for slot 02: READY gpu:1:GK106 [GeForce GTX 660] from 171.67.108.52
16:34:22:WU03:FS02:Connecting to 171.67.108.52:8080
16:34:23:WU02:FS01:Download complete
16:34:23:WU02:FS01:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:9201 run:12 clone:1 gen:24 core:0x17$
16:34:23:WU02:FS01:Starting
16:34:23:WU02:FS01:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:34:23:WU02:FS01:Started FahCore on PID 4493
16:34:23:WU02:FS01:Core PID:4497
16:34:23:WU02:FS01:FahCore 0x17 started
16:34:23:WU03:FS02:Downloading 1.52MiB
16:34:23:WU02:FS01:0x17:*********************** Log Started 2014-08-06T16:34:23Z ***********************
16:34:23:WU02:FS01:0x17:Project: 9201 (Run 12, Clone 1, Gen 24)
16:34:23:WU02:FS01:0x17:Unit: 0x0000002f6652edc45399d683ccb92989
16:34:23:WU02:FS01:0x17:CPU: 0x00000000000000000000000000000000
16:34:23:WU02:FS01:0x17:Machine: 1
16:34:23:WU02:FS01:0x17:Reading tar file state.xml
16:34:23:WU02:FS01:0x17:Reading tar file system.xml
16:34:23:WU02:FS01:0x17:Reading tar file integrator.xml
16:34:23:WU02:FS01:0x17:Reading tar file core.xml
16:34:23:WU02:FS01:0x17:Digital signatures verified
16:34:23:WU02:FS01:0x17:ERROR:exception: Bad platformId size.
16:34:23:WU02:FS01:0x17:Saving result file logfile_01.txt
16:34:23:WU02:FS01:0x17:Saving result file log.txt
16:34:23:WU02:FS01:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
^[[93m16:34:23:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:34:23:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9201 run:12 clone:1 gen:24 core:0x1$
16:34:23:WU02:FS01:Uploading 1.84KiB to 171.67.108.52
16:34:23:WU02:FS01:Connecting to 171.67.108.52:8080
16:34:25:WU02:FS01:Upload complete
16:34:25:WU03:FS02:Download complete
16:34:29:WU01:FS01:Connecting to 171.67.108.201:80
16:34:29:Saving configuration to /opt/fah/config.xml
16:34:29:<config>
16:34:29: 
16:34:29: <proxy v=':8080'/>
16:34:29:
16:34:29: 
16:34:29: <power v='full'/>
16:34:29:
16:34:29: 
16:34:29: <passkey v='********************************'/>
16:34:29: <team v='224384'/>
16:34:29: <user v='15goudreau'/>
16:34:29:
16:34:29: 
16:34:29: <slot id='0' type='CPU'>
16:34:29: <cpus v='6'/>
16:34:29: </slot>
16:34:29: <slot id='1' type='GPU'/>
16:34:29: <slot id='2' type='GPU'/>
16:34:29:</config>
16:34:29:WU02:FS01:Server responded WORK_ACK (400)
16:34:29:WU02:FS01:Cleaning up
16:34:30:WU03:FS02:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:9201 run:147 clone:1 gen:24 core:0x1$
16:34:30:WU03:FS02:Starting
16:34:30:WU03:FS02:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:34:30:WU03:FS02:Started FahCore on PID 4500
16:34:30:WU03:FS02:Core PID:4504
16:34:30:WU03:FS02:FahCore 0x17 started
16:34:30:WU01:FS01:Assigned to work server 171.67.108.52
16:34:30:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GK106 [GeForce GTX 660] from 171.67.108.52
16:34:30:WU01:FS01:Connecting to 171.67.108.52:8080
16:34:30:WU03:FS02:0x17:*********************** Log Started 2014-08-06T16:34:30Z ***********************
16:34:30:WU03:FS02:0x17:Project: 9201 (Run 147, Clone 1, Gen 24)
16:34:30:WU03:FS02:0x17:Unit: 0x0000002e6652edc45399dbca87411791
16:34:30:WU03:FS02:0x17:CPU: 0x00000000000000000000000000000000
16:34:30:WU03:FS02:0x17:Machine: 2
16:34:30:WU03:FS02:0x17:Reading tar file state.xml
16:34:30:WU03:FS02:0x17:Reading tar file system.xml
16:34:30:WU03:FS02:0x17:Reading tar file integrator.xml
16:34:30:WU03:FS02:0x17:Reading tar file core.xml
16:34:30:WU03:FS02:0x17:Digital signatures verified
16:34:30:WU03:FS02:0x17:ERROR:exception: Bad platformId size.
16:34:30:WU03:FS02:0x17:Saving result file logfile_01.txt
16:34:30:WU03:FS02:0x17:Saving result file log.txt
16:34:30:WU03:FS02:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
^[[93m16:34:30:WARNING:WU03:FS02:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:34:30:WU03:FS02:Sending unit results: id:03 state:SEND error:FAULTY project:9201 run:147 clone:1 gen:24 core:0x$
16:34:30:WU03:FS02:Uploading 1.85KiB to 171.67.108.52
16:34:30:WU03:FS02:Connecting to 171.67.108.52:8080
16:34:30:WU02:FS02:Connecting to 171.67.108.201:80
16:34:31:WU03:FS02:Upload complete
16:34:31:WU01:FS01:Downloading 1.52MiB
16:34:31:WU03:FS02:Server responded WORK_ACK (400)
16:34:31:WU03:FS02:Cleaning up
16:34:31:WU02:FS02:Assigned to work server 171.67.108.52
16:34:31:WU02:FS02:Requesting new work unit for slot 02: READY gpu:1:GK106 [GeForce GTX 660] from 171.67.108.52
16:34:31:WU02:FS02:Connecting to 171.67.108.52:8080
16:34:32:WU02:FS02:Downloading 1.52MiB
16:34:34:WU01:FS01:Download complete
16:34:34:WU01:FS01:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:9201 run:838 clone:1 gen:24 core:0x1$
16:34:34:WU01:FS01:Starting
16:34:34:WU01:FS01:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:34:34:WU01:FS01:Started FahCore on PID 4507
16:34:34:WU01:FS01:Core PID:4511
16:34:34:WU01:FS01:FahCore 0x17 started
16:34:34:WU01:FS01:0x17:*********************** Log Started 2014-08-06T16:34:34Z ***********************
16:34:34:WU01:FS01:0x17:Project: 9201 (Run 838, Clone 1, Gen 24)
16:34:34:WU01:FS01:0x17:Unit: 0x000000396652edc45399f6fb54bafff5
16:34:34:WU01:FS01:0x17:CPU: 0x00000000000000000000000000000000
16:34:34:WU01:FS01:0x17:Machine: 1
16:34:34:WU01:FS01:0x17:Reading tar file state.xml
16:34:34:WU01:FS01:0x17:Reading tar file system.xml
16:34:34:WU01:FS01:0x17:Reading tar file integrator.xml
16:34:34:WU01:FS01:0x17:Reading tar file core.xml
16:34:34:WU01:FS01:0x17:Digital signatures verified
16:34:34:WU01:FS01:0x17:ERROR:exception: Bad platformId size.
16:34:34:WU01:FS01:0x17:Saving result file logfile_01.txt
16:34:34:WU01:FS01:0x17:Saving result file log.txt
16:34:34:WU01:FS01:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
^[[93m16:34:34:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:34:34:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9201 run:838 clone:1 gen:24 core:0x$
16:34:34:WU01:FS01:Uploading 1.84KiB to 171.67.108.52
16:34:34:WU01:FS01:Connecting to 171.67.108.52:8080
16:34:35:WU01:FS01:Upload complete
16:34:35:WU01:FS01:Server responded WORK_ACK (400)
16:34:35:WU01:FS01:Cleaning up
16:34:36:WU02:FS02:Download complete
16:34:36:WU02:FS02:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:9201 run:932 clone:0 gen:23 core:0x1$
16:34:36:WU02:FS02:Starting
16:34:36:WU02:FS02:Running FahCore: /opt/fah/FAHCoreWrapper /opt/fah/cores/web.stanford.edu/~pande/Linux/AMD64/NVI$
16:34:36:WU02:FS02:Started FahCore on PID 4514
16:34:36:WU02:FS02:FahCore 0x17 started
16:34:36:WU02:FS02:0x17:*********************** Log Started 2014-08-06T16:34:36Z ***********************
16:34:36:WU02:FS02:0x17:Project: 9201 (Run 932, Clone 0, Gen 23)
16:34:36:WU02:FS02:0x17:Unit: 0x000000326652edc45399faa78b0063d4
16:34:36:WU02:FS02:0x17:CPU: 0x00000000000000000000000000000000
16:34:36:WU02:FS02:0x17:Machine: 2
16:34:36:WU02:FS02:0x17:Reading tar file state.xml
16:34:36:WU02:FS02:0x17:Reading tar file system.xml
16:34:36:WU02:FS02:0x17:Reading tar file integrator.xml
16:34:36:WU02:FS02:0x17:Reading tar file core.xml
16:34:36:WU02:FS02:0x17:Digital signatures verified
16:34:36:WU02:FS02:0x17:ERROR:exception: Bad platformId size.
16:34:36:WU02:FS02:0x17:Saving result file logfile_01.txt
16:34:36:WU02:FS02:0x17:Saving result file log.txt
16:34:36:WU02:FS02:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
^[[93m16:34:36:WARNING:WU02:FS02:FahCore returned: BAD_WORK_UNIT (114 = 0x72)^[[0m
16:34:36:WU02:FS02:Sending unit results: id:02 state:SEND error:FAULTY project:9201 run:932 clone:0 gen:23 core:0x$
16:34:36:WU02:FS02:Uploading 1.85KiB to 171.67.108.52
16:34:36:WU02:FS02:Connecting to 171.67.108.52:8080
16:34:37:WU02:FS02:Upload complete
16:34:37:WU02:FS02:Server responded WORK_ACK (400)
16:34:37:WU02:FS02:Cleaning up
16:34:40:FS00:Paused
16:34:40:FS01:Paused
16:34:40:FS02:Paused
16:34:40:FS00:Shutting core down
16:34:45:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
not sure what the issue is but I can't retrieve a WU. supposedly due to openGL support (says the FAH people). Thoughts on the matter? Thanks!
Last edited by 15goudreau (2014-08-12 21:31:14)

Here is the contents
[ 21.521]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 21.522] X Protocol Version 11, Revision 0
[ 21.522] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 21.522] Current Operating System: Linux Archer 3.15.8-1-ARCH #1 SMP PREEMPT Fri Aug 1 08:51:42 CEST 2014 x86_64
[ 21.522] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0990670e-b850-44c4-b4ea-7615b4442159 rw quiet
[ 21.522] Build Date: 31 July 2014 11:53:19AM
[ 21.522]
[ 21.522] Current version of pixman: 0.32.6
[ 21.522] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 21.522] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.522] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 5 18:44:55 2014
[ 21.524] (==) Using config file: "/etc/X11/xorg.conf"
[ 21.524] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 21.524] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 21.525] (==) ServerLayout "X.org Configured"
[ 21.525] (**) |-->Screen "Screen0" (0)
[ 21.525] (**) | |-->Monitor "Monitor0"
[ 21.526] (**) | |-->Device "Card0"
[ 21.526] (**) |-->Screen "Screen1" (1)
[ 21.526] (**) | |-->Monitor "Monitor1"
[ 21.526] (**) | |-->Device "Card1"
[ 21.526] (**) |-->Input Device "Mouse0"
[ 21.526] (**) |-->Input Device "Keyboard0"
[ 21.526] (==) Automatically adding devices
[ 21.526] (==) Automatically enabling devices
[ 21.526] (==) Automatically adding GPU devices
[ 21.527] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 21.527] Entry deleted from font path.
[ 21.528] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 21.528] Entry deleted from font path.
[ 21.528] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 21.528] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 21.528] Entry deleted from font path.
[ 21.528] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 21.528] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 21.528] Entry deleted from font path.
[ 21.528] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 21.528] Entry deleted from font path.
[ 21.528] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 21.528] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 21.528] Entry deleted from font path.
[ 21.528] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 21.528] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 21.528] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 21.528] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 21.528] (WW) Disabling Mouse0
[ 21.528] (WW) Disabling Keyboard0
[ 21.528] (II) Loader magic: 0x818d80
[ 21.529] (II) Module ABI versions:
[ 21.529] X.Org ANSI C Emulation: 0.4
[ 21.529] X.Org Video Driver: 18.0
[ 21.529] X.Org XInput driver : 21.0
[ 21.529] X.Org Server Extension : 8.0
[ 21.530] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 21.531] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 21.531] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 21.531] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 21.532] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 9 paused 0
[ 21.535] (--) PCI:*(0:1:0:0) 10de:11c0:3842:2660 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 21.535] (--) PCI: (0:2:0:0) 10de:11c0:3842:2662 rev 161, Mem @ 0xf8000000/16777216, 0xc0000000/134217728, 0xc8000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 21.535] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 21.536] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 21.536] (II) LoadModule: "glx"
[ 21.539] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 21.625] (II) Module glx: vendor="NVIDIA Corporation"
[ 21.625] compiled for 4.0.2, module version = 1.0.0
[ 21.625] Module class: X.Org Server Extension
[ 21.626] (II) NVIDIA GLX Module 340.24 Wed Jul 2 15:04:31 PDT 2014
[ 21.626] (II) LoadModule: "nvidia"
[ 21.627] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 21.633] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 21.633] compiled for 4.0.2, module version = 1.0.0
[ 21.633] Module class: X.Org Video Driver
[ 21.633] (II) NVIDIA dlloader X Driver 340.24 Wed Jul 2 14:42:23 PDT 2014
[ 21.633] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 21.634] (++) using VT number 1
[ 21.634] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 21.635] (II) Loading sub module "fb"
[ 21.635] (II) LoadModule: "fb"
[ 21.635] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 21.636] (II) Module fb: vendor="X.Org Foundation"
[ 21.636] compiled for 1.16.0, module version = 1.0.0
[ 21.636] ABI class: X.Org ANSI C Emulation, version 0.4
[ 21.636] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 21.636] (II) Loading sub module "wfb"
[ 21.636] (II) LoadModule: "wfb"
[ 21.636] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 21.637] (II) Module wfb: vendor="X.Org Foundation"
[ 21.637] compiled for 1.16.0, module version = 1.0.0
[ 21.637] ABI class: X.Org ANSI C Emulation, version 0.4
[ 21.637] (II) Loading sub module "ramdac"
[ 21.637] (II) LoadModule: "ramdac"
[ 21.637] (II) Module "ramdac" already built-in
[ 21.639] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 21.639] (==) NVIDIA(0): RGB weight 888
[ 21.639] (==) NVIDIA(0): Default visual is TrueColor
[ 21.639] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 21.639] (**) NVIDIA(0): Enabling 2D acceleration
[ 22.213] (II) NVIDIA(0): Display (Ancor Communications Inc ASUS VH238 (DFP-0)) does not
[ 22.213] (II) NVIDIA(0): support NVIDIA 3D Vision stereo.
[ 22.218] (II) NVIDIA(0): Display (DELL 2005FPW (DFP-3)) does not support NVIDIA 3D
[ 22.218] (II) NVIDIA(0): Vision stereo.
[ 22.218] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 22.219] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660 (GK106) at PCI:1:0:0 (GPU-0)
[ 22.219] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 22.219] (--) NVIDIA(0): VideoBIOS: 80.06.58.00.60
[ 22.219] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 22.225] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660 at PCI:1:0:0
[ 22.225] (--) NVIDIA(0): CRT-0
[ 22.225] (--) NVIDIA(0): Ancor Communications Inc ASUS VH238 (DFP-0) (boot, connected)
[ 22.225] (--) NVIDIA(0): DFP-1
[ 22.225] (--) NVIDIA(0): DFP-2
[ 22.225] (--) NVIDIA(0): DELL 2005FPW (DFP-3) (connected)
[ 22.225] (--) NVIDIA(0): DFP-4
[ 22.225] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 22.225] (--) NVIDIA(0): Ancor Communications Inc ASUS VH238 (DFP-0): Internal TMDS
[ 22.225] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VH238 (DFP-0): 330.0 MHz maximum pixel clock
[ 22.225] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 22.225] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 22.225] (--) NVIDIA(0): DFP-2: Internal TMDS
[ 22.225] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 22.225] (--) NVIDIA(0): DELL 2005FPW (DFP-3): Internal TMDS
[ 22.225] (--) NVIDIA(GPU-0): DELL 2005FPW (DFP-3): 330.0 MHz maximum pixel clock
[ 22.225] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 22.225] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 22.225] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 22.225] (**) NVIDIA(0): device Ancor Communications Inc ASUS VH238 (DFP-0) (Using
[ 22.226] (**) NVIDIA(0): EDID frequencies has been enabled on all display
[ 22.226] (**) NVIDIA(0): devices.)
[ 22.227] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 22.227] (**) NVIDIA(0): device DELL 2005FPW (DFP-3) (Using EDID frequencies has
[ 22.227] (**) NVIDIA(0): been enabled on all display devices.)
[ 22.228] (==) NVIDIA(0):
[ 22.228] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 22.228] (==) NVIDIA(0): will be used as the requested mode.
[ 22.228] (==) NVIDIA(0):
[ 22.228] (II) NVIDIA(0): Validated MetaModes:
[ 22.228] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-3:nvidia-auto-select"
[ 22.228] (II) NVIDIA(0): Virtual screen size determined to be 3600 x 1080
[ 22.265] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[ 22.265] (--) NVIDIA(0): option
[ 22.265] (==) NVIDIA(1): Depth 24, (==) framebuffer bpp 32
[ 22.265] (==) NVIDIA(1): RGB weight 888
[ 22.265] (==) NVIDIA(1): Default visual is TrueColor
[ 22.265] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 22.265] (**) NVIDIA(1): Enabling 2D acceleration
[ 22.736] (II) NVIDIA(GPU-1): Found DRM driver nvidia-drm (20130102)
[ 22.737] (II) NVIDIA(1): NVIDIA GPU GeForce GTX 660 (GK106) at PCI:2:0:0 (GPU-1)
[ 22.737] (--) NVIDIA(1): Memory: 2097152 kBytes
[ 22.737] (--) NVIDIA(1): VideoBIOS: 80.06.58.00.60
[ 22.737] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[ 22.740] (--) NVIDIA(1): Valid display device(s) on GeForce GTX 660 at PCI:2:0:0
[ 22.740] (--) NVIDIA(1): CRT-0
[ 22.740] (--) NVIDIA(1): DFP-0
[ 22.740] (--) NVIDIA(1): DFP-1
[ 22.740] (--) NVIDIA(1): DFP-2
[ 22.740] (--) NVIDIA(1): DFP-3
[ 22.740] (--) NVIDIA(1): DFP-4
[ 22.740] (--) NVIDIA(GPU-1): CRT-0: 400.0 MHz maximum pixel clock
[ 22.740] (--) NVIDIA(1): DFP-0: Internal TMDS
[ 22.740] (--) NVIDIA(GPU-1): DFP-0: 330.0 MHz maximum pixel clock
[ 22.740] (--) NVIDIA(1): DFP-1: Internal TMDS
[ 22.740] (--) NVIDIA(1): DFP-2: Internal TMDS
[ 22.740] (--) NVIDIA(GPU-1): DFP-2: 165.0 MHz maximum pixel clock
[ 22.740] (--) NVIDIA(1): DFP-3: Internal TMDS
[ 22.740] (--) NVIDIA(GPU-1): DFP-3: 330.0 MHz maximum pixel clock
[ 22.740] (--) NVIDIA(1): DFP-4: Internal DisplayPort
[ 22.740] (--) NVIDIA(GPU-1): DFP-4: 400.0 MHz maximum pixel clock
[ 22.740] (EE) NVIDIA(1): Failed to assign any connected display devices to X screen 1.
[ 22.740] (EE) NVIDIA(1): Set AllowEmptyInitialConfiguration if you want the server
[ 22.740] (EE) NVIDIA(1): to start anyway
[ 22.757] (EE) NVIDIA(1): Failing initialization of X screen 1
[ 22.757] (II) UnloadModule: "nvidia"
[ 22.757] (II) UnloadSubModule: "wfb"
[ 22.757] (II) UnloadSubModule: "fb"
[ 22.757] (--) Depth 24 pixmap format is 32 bpp
[ 22.994] (II) NVIDIA(GPU-1): Found DRM driver nvidia-drm (20130102)
[ 23.002] (II) NVIDIA(GPU-1): NVIDIA GPU GeForce GTX 660 (GK106) at PCI:2:0:0 (GPU-1)
[ 23.002] (--) NVIDIA(GPU-1): Memory: 2097152 kBytes
[ 23.002] (--) NVIDIA(GPU-1): VideoBIOS: 80.06.58.00.60
[ 23.002] (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X
[ 23.002] (--) NVIDIA(GPU-1): Valid display device(s) on GeForce GTX 660 at PCI:2:0:0
[ 23.002] (--) NVIDIA(GPU-1): CRT-0
[ 23.002] (--) NVIDIA(GPU-1): DFP-0
[ 23.002] (--) NVIDIA(GPU-1): DFP-1
[ 23.002] (--) NVIDIA(GPU-1): DFP-2
[ 23.002] (--) NVIDIA(GPU-1): DFP-4
[ 23.002] (--) NVIDIA(GPU-1): CRT-0: 400.0 MHz maximum pixel clock
[ 23.002] (--) NVIDIA(GPU-1): DFP-0: Internal TMDS
[ 23.002] (--) NVIDIA(GPU-1): DFP-0: 330.0 MHz maximum pixel clock
[ 23.002] (--) NVIDIA(GPU-1): DFP-1: Internal TMDS
[ 23.002] (--) NVIDIA(GPU-1): DFP-1: 165.0 MHz maximum pixel clock
[ 23.002] (--) NVIDIA(GPU-1): DFP-2: Internal TMDS
[ 23.002] (--) NVIDIA(GPU-1): DFP-2: 165.0 MHz maximum pixel clock
[ 23.002] (--) NVIDIA(GPU-1): DFP-3: Internal TMDS
[ 23.002] (--) NVIDIA(GPU-1): DFP-3: 330.0 MHz maximum pixel clock
[ 23.002] (--) NVIDIA(GPU-1): DFP-4: Internal DisplayPort
[ 23.002] (--) NVIDIA(GPU-1): DFP-4: 400.0 MHz maximum pixel clock
[ 23.002] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 23.002] (II) NVIDIA: access.
[ 23.007] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 23.007] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 23.007] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 23.007] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 23.007] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 23.007] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 23.007] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 23.007] (II) NVIDIA(0): Config Options in the README.
[ 23.012] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-3:nvidia-auto-select"
[ 23.138] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 23.138] (==) NVIDIA(0): Silken mouse enabled
[ 23.139] (==) NVIDIA(0): DPMS enabled
[ 23.139] (II) Loading sub module "dri2"
[ 23.139] (II) LoadModule: "dri2"
[ 23.140] (II) Module "dri2" already built-in
[ 23.140] (II) NVIDIA(0): [DRI2] Setup complete
[ 23.140] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 23.140] (--) RandR disabled
[ 23.144] (II) Initializing extension GLX
[ 23.198] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 23.198] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.198] (**) Power Button: Applying InputClass "system-keyboard"
[ 23.198] (II) LoadModule: "evdev"
[ 23.198] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 23.200] (II) Module evdev: vendor="X.Org Foundation"
[ 23.200] compiled for 1.16.0, module version = 2.9.0
[ 23.200] Module class: X.Org XInput Driver
[ 23.200] ABI class: X.Org XInput driver, version 21.0
[ 23.201] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 37 paused 0
[ 23.201] (II) Using input driver 'evdev' for 'Power Button'
[ 23.201] (**) Power Button: always reports core events
[ 23.201] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 23.201] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 23.201] (--) evdev: Power Button: Found keys
[ 23.201] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[ 23.201] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 23.201] (**) Option "xkb_rules" "evdev"
[ 23.201] (**) Option "xkb_model" "pc104"
[ 23.201] (**) Option "xkb_layout" "us"
[ 23.201] (**) Option "xkb_variant" "dvorak"
[ 23.219] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 23.219] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.219] (**) Power Button: Applying InputClass "system-keyboard"
[ 23.219] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 38 paused 0
[ 23.219] (II) Using input driver 'evdev' for 'Power Button'
[ 23.219] (**) Power Button: always reports core events
[ 23.219] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 23.219] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 23.219] (--) evdev: Power Button: Found keys
[ 23.219] (II) evdev: Power Button: Configuring as keyboard
[ 23.219] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event4"
[ 23.219] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 23.219] (**) Option "xkb_rules" "evdev"
[ 23.219] (**) Option "xkb_model" "pc104"
[ 23.219] (**) Option "xkb_layout" "us"
[ 23.219] (**) Option "xkb_variant" "dvorak"
[ 23.220] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[ 23.220] (II) No input driver specified, ignoring this device.
[ 23.220] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 23.220] (II) No input driver specified, ignoring this device.
[ 23.220] (II) This device may have been added with another device file.
[ 23.220] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 23.220] (II) No input driver specified, ignoring this device.
[ 23.220] (II) This device may have been added with another device file.
[ 23.221] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[ 23.221] (II) No input driver specified, ignoring this device.
[ 23.221] (II) This device may have been added with another device file.
[ 23.221] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[ 23.221] (II) No input driver specified, ignoring this device.
[ 23.221] (II) This device may have been added with another device file.
[ 23.221] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[ 23.221] (II) No input driver specified, ignoring this device.
[ 23.221] (II) This device may have been added with another device file.
[ 23.221] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[ 23.221] (II) No input driver specified, ignoring this device.
[ 23.221] (II) This device may have been added with another device file.
[ 23.221] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[ 23.221] (II) No input driver specified, ignoring this device.
[ 23.221] (II) This device may have been added with another device file.
[ 23.222] (II) config/udev: Adding input device USB full speed gaming keyboard (/dev/input/event2)
[ 23.222] (**) USB full speed gaming keyboard: Applying InputClass "evdev keyboard catchall"
[ 23.222] (**) USB full speed gaming keyboard: Applying InputClass "system-keyboard"
[ 23.222] (II) Using input driver 'evdev' for 'USB full speed gaming keyboard'
[ 23.222] (**) USB full speed gaming keyboard: always reports core events
[ 23.222] (**) evdev: USB full speed gaming keyboard: Device: "/dev/input/event2"
[ 23.222] (--) evdev: USB full speed gaming keyboard: Vendor 0x60b Product 0x6251
[ 23.222] (--) evdev: USB full speed gaming keyboard: Found keys
[ 23.222] (II) evdev: USB full speed gaming keyboard: Configuring as keyboard
[ 23.222] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2.4/4-1.2.4:1.0/0003:060B:6251.0003/input/input4/event2"
[ 23.222] (II) XINPUT: Adding extended input device "USB full speed gaming keyboard" (type: KEYBOARD, id 8)
[ 23.222] (**) Option "xkb_rules" "evdev"
[ 23.222] (**) Option "xkb_model" "pc104"
[ 23.222] (**) Option "xkb_layout" "us"
[ 23.222] (**) Option "xkb_variant" "dvorak"
[ 23.223] (II) config/udev: Adding input device USB full speed gaming keyboard (/dev/input/event3)
[ 23.223] (**) USB full speed gaming keyboard: Applying InputClass "evdev keyboard catchall"
[ 23.223] (**) USB full speed gaming keyboard: Applying InputClass "system-keyboard"
[ 23.223] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 40 paused 0
[ 23.223] (II) Using input driver 'evdev' for 'USB full speed gaming keyboard'
[ 23.224] (**) USB full speed gaming keyboard: always reports core events
[ 23.224] (**) evdev: USB full speed gaming keyboard: Device: "/dev/input/event3"
[ 23.224] (--) evdev: USB full speed gaming keyboard: Vendor 0x60b Product 0x6251
[ 23.224] (--) evdev: USB full speed gaming keyboard: Found 1 mouse buttons
[ 23.224] (--) evdev: USB full speed gaming keyboard: Found scroll wheel(s)
[ 23.224] (--) evdev: USB full speed gaming keyboard: Found relative axes
[ 23.224] (II) evdev: USB full speed gaming keyboard: Forcing relative x/y axes to exist.
[ 23.224] (II) evdev: USB full speed gaming keyboard: Forcing absolute x/y axes to exist.
[ 23.224] (--) evdev: USB full speed gaming keyboard: Found keys
[ 23.224] (II) evdev: USB full speed gaming keyboard: Configuring as mouse
[ 23.224] (II) evdev: USB full speed gaming keyboard: Configuring as keyboard
[ 23.224] (II) evdev: USB full speed gaming keyboard: Adding scrollwheel support
[ 23.224] (**) evdev: USB full speed gaming keyboard: YAxisMapping: buttons 4 and 5
[ 23.224] (**) evdev: USB full speed gaming keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 23.224] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2.4/4-1.2.4:1.1/0003:060B:6251.0004/input/input5/event3"
[ 23.224] (II) XINPUT: Adding extended input device "USB full speed gaming keyboard" (type: KEYBOARD, id 9)
[ 23.224] (**) Option "xkb_rules" "evdev"
[ 23.224] (**) Option "xkb_model" "pc104"
[ 23.224] (**) Option "xkb_layout" "us"
[ 23.224] (**) Option "xkb_variant" "dvorak"
[ 23.224] (II) evdev: USB full speed gaming keyboard: initialized for relative axes.
[ 23.224] (WW) evdev: USB full speed gaming keyboard: ignoring absolute axes.
[ 23.224] (**) USB full speed gaming keyboard: (accel) keeping acceleration scheme 1
[ 23.224] (**) USB full speed gaming keyboard: (accel) acceleration profile 0
[ 23.224] (**) USB full speed gaming keyboard: (accel) acceleration factor: 2.000
[ 23.224] (**) USB full speed gaming keyboard: (accel) acceleration threshold: 4
[ 23.224] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[ 23.224] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 23.225] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 41 paused 0
[ 23.225] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 23.225] (**) Logitech USB Receiver: always reports core events
[ 23.225] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[ 23.225] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc531
[ 23.225] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 23.225] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 23.225] (--) evdev: Logitech USB Receiver: Found relative axes
[ 23.225] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 23.225] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 23.225] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 23.225] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 23.225] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 23.225] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8:1.0/0003:046D:C531.0001/input/input2/event0"
[ 23.225] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 23.225] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 23.225] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 23.225] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 23.225] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 23.225] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 23.226] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 23.226] (II) No input driver specified, ignoring this device.
[ 23.226] (II) This device may have been added with another device file.
[ 23.226] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 23.226] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 23.226] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[ 23.227] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 42 paused 0
[ 23.227] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 23.227] (**) Logitech USB Receiver: always reports core events
[ 23.227] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 23.227] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc531
[ 23.227] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 23.227] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 23.227] (--) evdev: Logitech USB Receiver: Found relative axes
[ 23.227] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 23.227] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 23.227] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 23.227] (--) evdev: Logitech USB Receiver: Found keys
[ 23.227] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 23.227] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 23.227] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 23.227] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 23.227] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 23.227] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8:1.1/0003:046D:C531.0002/input/input3/event1"
[ 23.227] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 23.227] (**) Option "xkb_rules" "evdev"
[ 23.227] (**) Option "xkb_model" "pc104"
[ 23.227] (**) Option "xkb_layout" "us"
[ 23.227] (**) Option "xkb_variant" "dvorak"
[ 23.227] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 23.227] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 23.227] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 23.227] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 23.227] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 23.227] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 23.227] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[ 23.227] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 23.227] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[ 23.228] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 43 paused 0
[ 23.228] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 23.228] (**) Eee PC WMI hotkeys: always reports core events
[ 23.228] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event7"
[ 23.228] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 23.228] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 23.228] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 23.228] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input10/event7"
[ 23.228] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[ 23.228] (**) Option "xkb_rules" "evdev"
[ 23.228] (**) Option "xkb_model" "pc104"
[ 23.228] (**) Option "xkb_layout" "us"
[ 23.228] (**) Option "xkb_variant" "dvorak"
[ 23.229] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 23.229] (II) No input driver specified, ignoring this device.
[ 23.229] (II) This device may have been added with another device file.
[ 24.960] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VH238 (DFP-0)) does not
[ 24.960] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 24.967] (II) NVIDIA(GPU-0): Display (DELL 2005FPW (DFP-3)) does not support NVIDIA 3D
[ 24.967] (II) NVIDIA(GPU-0): Vision stereo.
[ 25.062] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 25.232] (II) NVIDIA(0): Setting mode "DVI-D-0: nvidia-auto-select @1050x1680 +0+0 {ViewPortIn=1050x1680, ViewPortOut=1680x1050+0+0, Rotation=90}"
[ 25.340] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1080 +1050+600 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-D-0: nvidia-auto-select @1050x1680 +0+0 {ViewPortIn=1050x1680, $
[ 26.411] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VH238 (DFP-0)) does not
[ 26.411] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 26.416] (II) NVIDIA(GPU-0): Display (DELL 2005FPW (DFP-3)) does not support NVIDIA 3D
[ 26.416] (II) NVIDIA(GPU-0): Vision stereo.
[ 36.659] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VH238 (DFP-0)) does not
[ 36.659] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 36.665] (II) NVIDIA(GPU-0): Display (DELL 2005FPW (DFP-3)) does not support NVIDIA 3D
[ 36.665] (II) NVIDIA(GPU-0): Vision stereo.
[ 111.092] (II) evdev: Eee PC WMI hotkeys: Close
[ 111.092] (II) UnloadModule: "evdev"
[ 111.092] (II) systemd-logind: releasing fd for 13:71
[ 111.140] (II) evdev: Logitech USB Receiver: Close
[ 111.140] (II) UnloadModule: "evdev"
[ 111.140] (II) systemd-logind: releasing fd for 13:65
[ 111.210] (II) evdev: Logitech USB Receiver: Close
[ 111.210] (II) UnloadModule: "evdev"
[ 111.210] (II) systemd-logind: releasing fd for 13:64
[ 111.290] (II) evdev: USB full speed gaming keyboard: Close
[ 111.290] (II) UnloadModule: "evdev"
[ 111.290] (II) systemd-logind: releasing fd for 13:67
[ 111.370] (II) evdev: USB full speed gaming keyboard: Close
[ 111.370] (II) UnloadModule: "evdev"
[ 111.370] (II) systemd-logind: releasing fd for 13:66
[ 111.450] (II) evdev: Power Button: Close
[ 111.450] (II) UnloadModule: "evdev"
[ 111.450] (II) systemd-logind: releasing fd for 13:68
[ 111.490] (II) evdev: Power Button: Close
[ 111.490] (II) UnloadModule: "evdev"
[ 111.490] (II) systemd-logind: releasing fd for 13:69
[ 111.928] (II) NVIDIA(GPU-1): Deleting GPU-1
[ 111.928] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 111.931] (EE) Server terminated successfully (0). Closing log file.
I looked through it but couldn't see if there was anything that related to OpenGL or which nvidia drivers were being used.

[SOLVED] Does yaourt save built packages anywhere?

Hi everybody. I'll put it as simple as I can.
I've downloaded, built and installed several packages from AUR with yaourt. Now I'm uninstalling some packages and programs I don't really need, and between them some of via-yaourt-built ones. But since some of them really took some time to be built, I would like to keep them if I want to install them again later. The problem is that they're not in /var/cache/pacman/pkg nor in other directories in my ~/ folder, and I don't know where else to look. Looking in the wiki and searching the bbs gave me no result. Can somebody please tell me where yaourt saves the packages it builds, if it saves them anywhere at all? [but it would be Very dull if it didn't]
Thanks everybody!
Last edited by olorian (2011-12-24 13:38:33)

Thank you for your fast answer!
I did read both, yaourtrc, yaourtrc.5 and yaourt.8, and I found out about exporting possibility in the first place. Let me ask for confirmation: does all of it imply that, since my yaourtrc reads
#EXPORT=0
#EXPORTSRC=0
#EXPORTDIR=""
and my makepkg.conf
#PKGDEST=/home/packages
#SRCDEST=/home/sources
#SRCPKGDEST=/home/srcpackages
thus all of the variables are commented, I have no choice but using bacman to have the .xz packages of the programs I previously built?
As to say it so, I should have known before, should I? -D
This bacman looks like exactly what I would need in this situation however - I'm using it right now to repackage the binaries - thank you!
Last edited by olorian (2011-12-24 12:37:08)

[SOLVED] How to disable built-in speaker when I use the jack port ?

Hi,
I own an Asus X52F-SX053V laptop which has built-in Altec Lancing speaker.
Here is my problem: When I plug my external speaker, or my headphones in the Jack port; I hear the sound through the device plugged in, AND through the built-in speaker.
I'd like to disable the built-in speaker when I'm using an external speaker/headphones.
I currently don't know how to do that, I guess it is possible
I can copy the output of all the commands needed.
Thanks
Last edited by Lowra (2010-12-28 23:17:28)

[SOLVED] When I plug something in the jack port, built-in speakers are automatically disabled.
Here is the trick:
sudo nano /etc/modprobe.d/alsa-base.conf
Add the following line:
options snd-hda-intel model=hp-laptop
Restart Alsa, or reboot your computer
Have Fun !
Note: I guess it should work with other Asus computer (A52F, X52F series) and even maybe with other computers which use the following chipset: Intel IbexPeak HDMI

[SOLVED] Space in /home is not what I choose during partition

Hello. I have a very strange problem:
I installed archlinux two days ago and partitioned as you see here:
But what I really get is:
(translated: Content=82Gb, Free Space=108Gb => Total Space=190Gb)
The first image is what GParted says to me. The second is what Nautilus file manager display.
I never seen something like this before. What could be?
EDIT & SOLVE:
I just logged in as root and noticed that the free space of my /home was what it has to be. Then I re-logged in as normal user and it was the same.
It seems to be solved.
Last edited by Redder (2013-05-25 14:59:27)

Hi Allan,
Thanks for the quick reply!
Should I leave both the HomeHub and the new white Openreach modem switched on, or would you recommend a re-boot of each device at this stage?
I have left everything as it was when the engineer left the house, and I know excessive switching on/off of the HH will be a problem for the line to stabilise.
Cheers,
Neil.

How do I install OS X Server on my home built server?

I am currently in the process of planning my build for a home server and trying to cross my Ts and dot my Is before I go start buying everything. Everything I run at home is Apple based and would like to continue that with this server so there is an easier flow to things and no formatting issues. I know Apple doesn't like installing there OS on non Apple machines but just want to check and make sure this is not the case. Also if this is not the case what system requirements does OS X Server require? I have thought about just using some free Linux software for this new server I plan on creating but I just don't feel it will be the same and would much rather have the GUI of OS X Server.

jennymnky wrote:
I know Apple doesn't like installing there OS on non Apple machines but just want to check and make sure this is not the case.
This is the case.
OS X 10.10 Yosemite server License -> http://images.apple.com/legal/sla/docs/OSXServer40.pdf
"2. Permitted License Uses and Restrictions.
A. Preinstalled and Single-Copy Apple Software License. Subject to the terms and conditions of this
License, unless you obtained the Apple Software as described in Section 2B, 2C or 2D, you are granted
a limited, non-exclusive license to install, use and run one (1) copy of the Apple Software on a single
Apple-branded computer at any one time. F"
(emphasis mine)

Switching from Windows XP to Mac OS X Tiger on a home built Desktop PC?

I was wondering and I cannot seam to find any topics on it so. I want to know if it is possible to take my Desktop I built mainly for Windows and put Mac OS X Tiger on it?
Desktop Spc's:
Mother Board: Gigabyte Intel Socket 775
Processor: Intel P4 3.4 Mega-Hertz
Front Side Bus: 800 Mega-Hertz
Hard Drive: 40 Gig SATA
Ram: 1 Gig
Video Card: Nvidia 6600GT
I just want to find out if it is possible. I was reading an artical and found out that the Mac OS X Tiger already has many of the things that the new windows vista has. So I thought that I would ask to see if it is possible. Thank you in advanced.

There are plenty of topics on this very question which gets asked fairly often depending on your search criteria.
Short answer is no.
The OS X license agreement provides for installing and using it on a single Apple branded/labeled computer only.
The only way to install Tiger on a PC is via a hack of some sort and even if the hack is successful, very little on your PC would be supported and the overall performance would not be worth the trouble.
> I was reading an artical and found out that the Mac OS X Tiger already has many of the things that the new windows vista has.
What you read is correct and it took Microsoft 5 years to come up with what amounts to a copy of OS X. I read there are 10 separate/different versions of Vista to choose from? How on earth is the average person (or even the above average person) expected to wade through all that confusing mess?
Apple is getting ready to launch a new OS X version called Leopard this spring which will place Windows even father behind.
If you want to run Tiger and Vista, purchase an Intel Mac which gives you the ability to run both operating systems natively on a single computer.

[solved] a "permanent" home for srcdir, via makepkg

I use a very low-bandwidth connection at home... it is as good as dial-up. When updating packages from AUR, I see many of them get a lot of data via git and hg. Some remember to limit the data using --depth=1, and some don't -- but that's beside the point Currently, I see that it is all downloaded to a directory in /tmp, and deleted soon after the package is installed. Some other packages download the source tar, and build from it. If there is any error in building it, it deletes all that it has done, and I have to download it again to attempt to fix it.
3 questions:
1. In makepkg, if I set the srcdir to /usr/src, and remove the rm -rf $srcdir, are there any downsides to doing this? (... besides the fact that I would have to clean up /usr/src for old and/or deleted packages myself, and that an update to pacman will over-write my changes.)
2. Can the pacman source be changed to make this a configuration option? (... defaulting to srcdir in /tmp.)
3. Or even better... can yaourt be changed to have an --import option for updates?
I could have gone ahead and made the change (in 1) on my own system... but I am quite new to Arch, and am not aware of the various interdependencies. I did not want to risk running ahead with this and cluttering up (or nuking) my system beyond repair.
Last edited by prash (2011-12-30 04:36:17)

It won't overwrite your changes because makepkg.conf is in the backup array ('Backup Files' at the bottom)
[karol@black ~]$ pacman -Qii pacman
Name : pacman
Version : 4.0.1-1
URL : http://www.archlinux.org/pacman/
Licenses : GPL
Groups : base
Provides : None
Depends On : bash glibc>=2.14 libarchive>=2.8.4 curl>=7.19.4 gpgme
pacman-mirrorlist
Optional Deps : fakeroot: for makepkg usage as normal user
Required By : expac-git nosr-git package-query-git packer pacman-contrib
pacmanxg-bin pkgstats yaourt-git
Conflicts With : None
Replaces : None
Installed Size : 3412,00 KiB
Packager : Dan McGee <[email protected]>
Architecture : i686
Build Date : pon, 21 lis 2011, 05:04:37
Install Date : pon, 21 lis 2011, 21:24:59
Install Reason : Explicitly installed
Install Script : Yes
Description : A library-based package manager with dependency support
Backup Files:
MODIFIED /etc/pacman.conf
MODIFIED /etc/makepkg.conf
so the new config will be created as makepkg.conf.pacnew - https://wiki.archlinux.org/index.php/Pa … save_Files
Yaourt has its own configs. You can tell yaourt to build somewhere else, use --tmp commandline switch or edit /etc/yaourtrc, uncomment and change
#TMPDIR="/tmp"
to somewhere else.

[Solved] Apps in /home/user/bin won't run

As per subject.
To run such command I have to give full path of /home/user/bin/app because simple app is not being recognized.
Last edited by Lockheed (2011-05-02 12:18:53)

Lockheed wrote:
Well, obviously "user" in the path is just replacement of my username, lets say the real location of my bins is /home/smith009/bin
I am not really sure what either of us suggested to do. Can you rephrase?
kazuo suggested you run
export PATH="/home/user/bin:$PATH"
and try again. Of course you need to change to the real path, e.g. /home/smith009/bin.
Lockheed suggested to change it to
export PATH="$PATH:/home/user/bin"

[SOLVED] e4defrag skipping home

I've just noticed something curious that seems to have changed recently.
When I run:
sudo e4defrag -c /
sudo e4defrag /
The root directories are processed but the home directories seem to be skipped. If I specify the home directory, then all's fine and it works on the home directories. But I'm curious as to why this seems to have changed. I thought the "/" argument as above would include "home". I've got Arch on 3 PCs and it's now consistently this way with all of them.
I've searched the wiki, the forums and google and I'm coming up a blank. Any ideas would be very much appreciated.
Many thanks,
Jules
Last edited by julesm (2014-12-23 12:08:25)

Thanks for this. Here's my fstab from my laptop:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/mapper/lvmpool-root
UUID=53755bd8-cdb3-4490-8101-b3e83d0463b5 / ext4 relatime,data=ordered 0 1
# /dev/mapper/lvmpool-home
UUID=798097bd-cdcb-4610-bacf-39dcc8642e5f /home ext4 relatime,data=ordered 0 2
# /dev/sda1
UUID=e08e6ce4-ee3d-4fdc-8271-8b19f1ddfa31 /boot ext4 relatime,stripe=4,data=ordered 0 2
# /dev/mapper/lvmpool-swap
UUID=7d5d6aec-72e5-4de4-b168-8525b0f7d3e2 none swap defaults 0 0
But the same is happening on another pc where I don't use lvm...
Thanks again!

[SOLVED] Contents of home folder on desktop in Gnome Shell

A few days ago, after installing some updates (I believe gnome-themes-standard was amongst them) and restarting, I found that the contents of my home folder were displayed as icons on my desktop, and when I go into Activities mode, the background is black. Searching around hasn't turned up any results... any ideas?
In case there's any potential graphics related issues wrt the blank background, the system is a laptop with a HD3000 GPU in a Core i7 CPU.
Last edited by ch_123 (2013-03-04 10:00:07)

You can probably remove the desktop icons by opening dconf-editor and going to org.gnome.desktop.background. Once there, untick show-desktop-icons and restart the Shell.
I don't know about your other issue though, have you tried with another theme?
EDIT: The issues are related; my background also just went black. Just untick the above option, re-set your wallpaper and finally restart the Shell; that did it for me.
Last edited by Unia (2013-02-23 15:35:30)

[SOLVED] Finding missing home folder

Ok, I just got some new hardware and was finally able to try out an x86-64 distro, which made me want to give Arch another go in hopes that some old compatibility issues I had would have died with my old hardware (which they greatfully did).
My issue started out where after install my old home folder from Mint was apparently missing. So what I did was try mounting my home partition to a temp folder to see what it showed and I was surprised to see that my old home folder was there, but my current one was not. I then looked closer at my current home folder and noticed that the free space shown for it was closer to what my / partition had. This got me wondering if something was wrong with my fstab file, so I went in that and found that when I added noatime flags to a few of my partitions that I mis-typed it for the partition for my home folders (noaatime instead of noatime).
I corrected this mistake, saved, and rebooted and found I wasn't allowed to start up my desktop, because now my current Arch user home directory is missing, presumably orphaned on my / partition.
What I would like to know is if there is a way to recover this now missing folder. I would like to recover a downloaded file in it and perhaps relocate the whole thing into the proper partition for my home directory. Also, even if I can't it's not a big deal, besides the fact that I would want to purge the folder if it is orphaned and still taking up space in my / partition.
If anyone can help point me in the right direction, I would be very grateful.
Last edited by xcausex (2011-06-21 19:18:56)

I may have totally misunderstood, but I think that your old mint home dir is on a file-system that you mount on /home. But, your Arch home dir is in /home on the root file-system. So when you mount /home it "hides" the Arch home dir underneath the newly mounted file-system
To fix (if this is correct)...
1) log out of all sessions
2) log in as root
3) # umount /home
4) # cd /home
At this point, your old mint home dir should be gone and the new Arch one available
5) # mv <your_username> /
6) # cd /
7) # mount /home
8) # cd /home
9) # mv <your_username> <your_username>.old
10) # mv /<your_username> .
Last edited by oliver (2011-06-21 19:03:34)

[SOLVED] Moving boot, home and var partition post-install

I've installed my whole Arch on a single 10GB partition because of low disk space. But now that I've gained a lot of disk space, I want to move /boot, /home and /var to separate partitions.
I'm going to use live CD, so everything will be unmounted.
home and var:
I assume it's just a matter of moving files and changing fstab.
boot:
I assume, I'll have to move all files to new partition and re-install grub/burg.
Is there anything more to it?
Last edited by Camus (2011-12-01 11:37:32)

You need to edit your fstab file, copy files to the new partitions (check for permissions!), and restore grub(2), see wiki.
If you do not have custimized Arch, you could do a reinstall, but I'm not responsible for that tip. So be sure to have a backup or something like that.

[SOLVED] /boot and /home in /

Hello, i don't exactly know how to explain this, it's the first time, yesterday, I was re-installing Arch, and everything ok, but know I see that the partition /home and /boot did not mount as always, i have to mounted and put the passwd to be able to enter them, i don't know how to make the /boot partition "invisible" and the /home to be inside the /.
I don't know if I explain this well and if someone has gone through this could help me please, i don't have the time to do another install.
Thanks.
Last edited by WinterSoldier53 (2014-11-04 18:01:02)

WinterSoldier53 wrote: lsblk -f says:
[root@ARGUS ~]# lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 ext2 /boot 7f00010c-cf85-4d27-a535-636a4b04fdf4 /home
├─sda2 ext4 / 1c58bfba-1b31-4ef2-b861-1bf28590624d /
├─sda3 ext4 /home 6d2b9760-bbbc-485e-8be8-dcadb18c6716 /run/media/root/_home
└─sda4 swap 542ad698-82cb-483f-b2ad-73950a7e40c1
Your /home partition is LABELED "/boot" -- but it is mounted as the /home partition. Your root partition is both labeled root and mounted as such. the LABEL /home is actually mounted at /run/media/root/_home.
Make sure you are not reading the LABEL but reading the mount point when fixing this.
(Also, is your swap "on"? My output of the same command is (and I didn't label any of my paritions, so that column is blank):
[mrunion@rustyhump ~]$ lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 ext4 d4b24c79-9b3c-46b4-b655-946c52bfd779 /
├─sda2 ext4 8c88bccd-9647-4c42-bd72-5c6e49aac0aa /home
├─sda3 vfat 0B43-F647 /boot
└─sda4 swap 8cac10ef-99a0-4848-bdb3-1c39454c116b [SWAP]
Last edited by mrunion (2014-11-03 01:27:35)

[Solved] BOINC (Seti@Home) Problem :(

Hi guys,
I have installed Boinc with the intention of running the Seti project on it.
However there's where my luck ran out. I can't seem to do anything with it no matter what I try.
I installed Boinc as per:
pacman -Sy boinc
This went off without a hitch so I then add my user to the "boinc" group.
However when i run boinc_gui the interface pops up but It says
"(X) Error" above "retrieve current status"
I can't click "add project" or "attach to manager" or anything,
I'm sure its something obvious I'm missing but Ive looked all over the net and messed about
with a lot of permissions and so on. I'm lost!
Any thoughts?
PS:
uname -a
Linux kannagi 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64 AMD Opteron(tm) Processor 248 AuthenticAMD GNU/Linux
Last edited by DrMikeDuke (2009-08-01 13:40:47)

Update
Running "boinc_client --attach_project ---- -----" gave the following errors:
[mike@kannagi ~]$ boinc_client --attach_project http://setiathome.berkeley.edu/ -----------------------------------------------------
30-Jul-2009 00:14:39 [---] Starting BOINC client version 6.4.5 for x86_64-pc-linux-gnu
30-Jul-2009 00:14:39 [---] log flags: task, file_xfer, sched_ops
30-Jul-2009 00:14:39 [---] Libraries: libcurl/7.19.5 OpenSSL/0.9.8k zlib/1.2.3.3
30-Jul-2009 00:14:39 [---] Data directory: /home/mike
30-Jul-2009 00:14:39 [---] Processor: 2 AuthenticAMD AMD Opteron(tm) Processor 248 [Family 15 Model 5 Stepping 10]
30-Jul-2009 00:14:39 [---] Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext 3dnow rep_good
30-Jul-2009 00:14:39 [---] OS: Linux: 2.6.30-ARCH
30-Jul-2009 00:14:39 [---] Memory: 7.68 GB physical, 976.46 MB virtual
30-Jul-2009 00:14:39 [---] Disk: 228.29 GB total, 203.09 GB free
30-Jul-2009 00:14:39 [---] Local time is UTC -7 hours
30-Jul-2009 00:14:39 [---] Not using a proxy
30-Jul-2009 00:14:39 [---] Can't load library libcudart
30-Jul-2009 00:14:39 [---] No coprocessors
30-Jul-2009 00:14:39 [http://setiathome.berkeley.edu/] URL: http://setiathome.berkeley.edu/; Computer ID: not assigned yet; location: (none); project prefs: default
30-Jul-2009 00:14:39 [---] No general preferences found - using BOINC defaults
30-Jul-2009 00:14:39 [---] Preferences limit memory usage when active to 3934.38MB
30-Jul-2009 00:14:39 [---] Preferences limit memory usage when idle to 7081.88MB
SIGSEGV: segmentation violation
Segmentation fault
Hope this might help someone help me hehe.

SCP solved on my home built

Similar Messages

Maybe you are looking for