SCPI command to set the frequency for power measurement on Agilent 53147A?

Hello,
I am trying to automate some measurements which require me to use an Agilent 53147A Freq Counter/Power Meter/Digital Voltmeter. The instrument has an option of setting the frequency of the signal we intend to measure. This is done by clicking the "FREQ" button on the instrument and entering the frequency value of the signal whose power we intend to measure. This way the power meter uses the appropriate calibration factor for that frequency for providing accurate signal power level.
I have been trying to set the frequency of the signal whose power I intend to measure through remote control but have not met success as I have not been able to find the SCPI command associated with this task in the operating manual. Does anyone know what SCPI command is to be used for this purpose? Any comment in this regard is highly appreciated.
Thank You,
Vivek

Hi vivek.madhavan.13,
Try using the drivers for this device found here:
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=834204A36619504AE04400144FB7D2...
Then, by going to the lowest level that the VIs permit, you may be able to find the SCPI commands your application needs.
Regards,
Joel I.
Applications Engineer
National Instruments

Similar Messages

  • How to set the value for Power Cost in SCCM reports in Euro's?

    Hello,
    I have found out how to change the value of the 'cost' of the KWh for these reports (reporting) . But ther original settings where displayed and set in USD($) with some other values. I have of course changed the USD to EUR (€) in my case, but my question
    is: how do i know what I have to fill in in the field : costOfKwh, according my manager for my organisation it is in euro's 5,9 euroct/Kwh
    Do I have to fill in 5,9 or 0,59 or 0,059 ???
    Then also ther are some other values set in the original reports, like :
    KwhConsumptionDesktopComputerOn value = 0,07
    KwhConsumptionLaptopComputerOn  value = 0,02
    KwhConsumptionDesktopMonitorOn    value = 0,03
    Do i have to leave this settings ?

    Yes, I know this is an old post, I’m just trying to clean them up.
    The default of 0.09 is 9 cents/ KwH so  I’m assume that 5.9 cent (euro) so that you bet 0.059
    BTW if you have edit the report to change $ to € then you can also set eh default value to whatever the current power cost is too.
    http://www.enhansoft.com/

  • Set the password for zip file in unix

    Hi All,
    I have used the below command to zip the file and it is working fine.
    cd /YYYY;zip -r ZZZZ.zip ZZZZ.TXT
    While using the below command to set the password on zip file , I am getting error like "zip error: Invalid command arguments (encryption not supported)
    zip -P password -r ZZZZ.zip ZZZZ.TXT
    Can you please help me how to set the password for zip file in UNIX.
    Thanks,

    Do you use any characters in the password that might confuse the zip command? (like '-' or ';'?)
    If I use the command in RHEL4:
    cd /tmp
    zip -P password -r tt.zip gconfd-oracle
    adding: gconfd-oracle/ (stored 0%)
    adding: gconfd-oracle/lock/ (stored 0%)
    adding: gconfd-oracle/lock/ior (deflated 67%)

  • AppleTV stops after about 10 minutes and I get the "spinning circle".  I have re-set the computer's power setting to NEVER shut down, but no help.

    My Apple TV stops playing after about 10 minutes.  It will only work when iTunes is open, so I leave iTunes and and Home Sharing is on.  Everything is fine for about 10+ minutes, then the music stops and I get the "spinning circle".  I've set the computer's power settings to never shut down, thinking that it was stopping because the power went off, but it still stops.  People over for T-giving soon. HELP!!

    Intel-based Macs: Resetting the System Management Controller (SMC)
    Power
    The computer sleeps or shuts down unexpectedly.

  • RMAN's commands to check the datafiles for any sort of corruptions

    what are RMAN's commands to check the datafiles for any sort of corruptions

    RMAN is check database or backups here? i think its checking backups? and
    You mean to say that its not checking the datafiles but the backup of them for corruption is it?If this is what you meant than I guess you haven't read teh link that I referred.From there,
    When performing a BACKUP... VALIDATE, RMAN reads the files to be backed up in their entirety, as it would during a real backup. It does not, however, actually produce any backup sets or image copies.This command wont check the backups and neither its taking a backup.Its checking it for corruptions.
    [i]
    RMAN>backup validate database ;
    not working when db is in no-archivelog mode
    Are you trying to run it in the open stage ? If you are in Noarchive mode, you can't run backup related commands in open stage.Run it in the mount stage.
    Aman....

  • How to set the conditions for item deletion approval workflow?

    Hi,
    I have created approval workflow for item modifications ie, when user try to modify an item, it will send a mail to Project Manager. For that I set the conditions in Change the behavior of the overall task: 1. When the task process starts 2 . When the task
     process completes .
    Change the behavior of the single task: 1.when a task is Pending.
    [I followed this https://www.nothingbutsharepoint.com/sites/eusp/Pages/5-Steps-to-Enhance-SharePoint-2010-Approval-Workflow.aspx ]
    My Requirement is that I want to set this same workflow for the scenario: when the user deletes an item it will send a mail (intimation mail for item deletion) to Project Manager. here i dont want to send modification mails when user deletes an item.
    When user modifies an item: 1. intimation mail, 2. Approve/Reject mail 3. intimation for approval / rejection mail.
    When user deletes an item: 1. intimation mail.
    How can we set it in one approval workflow?? where i have to set the condition for sending either item modification mails or deletion mail.
    Thanks,
    Praveen ji

    Hi,
    According to your post, my understanding is that you wanted to start approval workflow when item deleted.
    You should first make some changes to trigger the workflow when you delete the item.
    You can use the Event Receiver to achieve it.
    In order to trigger workflow on item delete you need to create event receivers and from event receiver call the workflow already attached with list.
    http://ravendra.wordpress.com/sharepoint-workflow-on-list-item-delete/
    You can also create custom action to start the workflow, you can refer to the following article, then modify the workflow as your need.
    http://blogs.sharepoint911.com/blogs/jennifer/Lists/Posts/Post.aspx?ID=50
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • How to set the icon for the entire application with JFrame.setIconImage

    I set the icon on the main frame using JFrame.setIconImage(). The icon is shown properly in the main frame.
    If more JFrames are opened from the main frame, the newly opened JFrames also show the icon.
    However if JDialogs are opended, in some cases the icon set on the main frame is shown and in other cases the coffee cup.
    What is JFrame.setIconImage() expected to do? Setting the icon for a single JFrame or the entire application?
    How can I set the icon for the entire application?
    How can I set the icon for JDialogs?
    Thank you

    In order for your dialogs to use the same icon as the frame, you must parent the dialogs to the frame which has the custom icon.
    See the following thread for more information: http://forum.java.sun.com/thread.jsp?forum=57&thread=362542
    cheers,
    Greg

  • How to set the size for height of iView tray?

    Hi,
    I have created a ABAP webdynpro component and integrated this comp with iView. Then i integrated iView into Page in portal. That is working fine.
    But the size of tray/window which is displayed in the page is very small.
    How to increase the height of that Tray/window/iView containing my component?

    Hi,
    By changing the maximum automatic height and Minimum automatic height property of the iview you can set the size for height of your iview.
    to do this follow the setps:
    goto content administrator -> portal content -> your folder where you created your iview or directly to your iview -> right click -> open -> object,
    and now in property category choose appearance-Size from the drop down menu and set the above properties to your required height.
    if you want the end user to modify this property set the property to read/write .
    *********please reward points if the information is helpful to you********************

  • How do you set the duration for multiple stills in iMovie 2013?

    How do you set the duration for multiple stills in iMovie 2013?
    Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
    Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
    REALLY??!!

    ...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
    Because often people are animating to words or beats in the music.  Music is rarely performed with a computer-precise beat and tempo.  Musicians aren't robots: they swing the beat sometimes.  They use rubato.  They change tempo.  They change time signatures.  As a result, you have to FIND those words and beats.  It's not a situation where you can say, "There!  I've found the duration of one beat!  Now it's easy to find the rest of them!" 
    If you try it, you will be very disappointed.
    Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out.  You'll see that it's trial-and-error: what's the point where it becomes inaudible?  It depends on how high your speakers are turned up.  You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume.  You might say, "Hey!  The music ends before the layer ends!"...  but you KNOW you set the layer's out point when the audio file goes silent.
    AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
    I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures.  Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works.  For true accuracy, you need  find the timings yourself. 
    If you want something simpler, try a different application. But be prepared for lower level of accuracy.

  • Can I set the language (for spellcheck) of a document in the iCloud Web version, or iOS version, of Pages? If yes, how?

    Can I set the language (for spellcheck) of a document in the iCloud Web version, or iOS (iPad) version, of Pages? If yes, how?

    In iOS, the spellcheck language follows the keyboard.
    The forum for questions about iOS Pages is at
    https://discussions.apple.com/community/app_store/iwork_for_ios

  • Can I set the DocumentType for an XML document? If so how? please help

    Hi,
    I am porting some code from jdom to xerces.
    jdom's document class provides a setDocType(String, String) function to set the DTD for the document.
    Is there anything similar in dom?
    The javadocs only mentions a getDocType() for the document interface in org.w3c.dom.Node interface. Is there any way I can SET the document type (DTD) for a given document object?
    TIA,
    Srinivas.

    In iOS, the spellcheck language follows the keyboard.
    The forum for questions about iOS Pages is at
    https://discussions.apple.com/community/app_store/iwork_for_ios

  • Problem in setting the parameters for an OASingleSelectionBean

    Hi,
    I have created an advanced table, for which I have to allow single selection or mutliple selection according to my requirements ie dynamically. So, for single selection, I have created a OASingleSelectionBean dynamically and add this to my advanced table bean.
    I also want to set Action for the single selection option. I have set the action using
    setPrimaryClientAction() which takes an argument of oracle.cabo.ui.action.FirePartialAction class. Now I also want to pass certain parameters when the single selection event happens.
    For that, I have taken an object of FirePartialAction class and but using the FirePartialAction class .setParameters(oracle.cabo.ui.collection.Parameter[]) function. I am setting the parameters using
    Parameter class object.setKey
    Parameter class object.setValue
    But my problem is that I want the value for the parameters at runtime, for which I intend to use SPEL. But I am not able to use SPEL using the setValue method.
    So it goes like this in short:
    OAAdvancedTableBean.setTableSelection(OASingleSelectionBean)
    OASingleSelectionBean.setPrimaryClientAction(FirePartialAction)
    FirePartialAction.setParameters(Parameter[])
    Parameters.setKey(String)
    Parameters.setValue(String) --- In case of value I want to give SPEL as an argument as I get the value at rutime
    Is that any other way in which I can set the value for the parameters using SPEL?

    Hi,
    I got ur point.
    Although i have never tried.........Can you try using method
    Parameters.setValueBinding(new OADataBoundValueViewObject(<single selectionbean>,<vo attr>))
    In this way without the use of SPEL, you will be able to achieve the functionality!
    Try this and get back to me!
    --Mukul
    Message was edited by:
    Mukul Gupta

  • How to set the header for second page

    Hello all,
    I'm trying to set different header for first page and page number should starts from second page.
    Below is the sample code to set the header for each and every page.
    DECLARE
    hApplication OLE2.OBJ_TYPE;
    hWindow OLE2.OBJ_TYPE;
    hPane OLE2.OBJ_TYPE;
    hView OLE2.OBJ_TYPE;
    hDocuments OLE2.OBJ_TYPE;
    hDocument OLE2.OBJ_TYPE;
    hSelection OLE2.OBJ_TYPE;
    hParagraphFormat OLE2.OBJ_TYPE;
    hRange OLE2.OBJ_TYPE;
    hFields OLE2.OBJ_TYPE;
    hFont OLE2.OBJ_TYPE;
    args OLE2.LIST_TYPE;
    wdAlignParagraphLeft CONSTANT number(3) := 0;
    wdAlignParagraphCenter CONSTANT number(3) := 1;
    wdAlignParagraphRight CONSTANT number(3) := 2;
    wdSeekCurrentPageHeader CONSTANT number(3) := 9;
    wdSeekCurrentPageFooter CONSTANT number(3) := 10;
    wdSeekMainDocument CONSTANT number(3) := 0;
    wdFieldPage CONSTANT number(3) := 33;
    wdFieldNumPages CONSTANT number(3) := 26;
    wdPageBreak CONSTANT number(3) := 7;
    wdStory CONSTANT number(3) := 6;
    myTab CONSTANT varchar2(1) := chr(9);
    myBlue CONSTANT number(8) := 16711680; --FF0000
    myGreen CONSTANT number(8) := 65280; --00FF00
    myRed CONSTANT number(8) := 255; --0000FF
    myDkGreen CONSTANT number(8) := 32768; --008000
    myBlack CONSTANT number(8) := 0; --000000
    myText varchar2(2000);
    BEGIN
    hApplication:=OLE2.CREATE_OBJ('Word.Application');
    OLE2.SET_PROPERTY(hApplication, 'Visible', 1);
    hDocuments := OLE2.GET_OBJ_PROPERTY(hApplication, 'Documents');
    hDocument := OLE2.INVOKE_OBJ(hDocuments, 'Add');
    -------- Create Header and Footer --------
    hWindow := OLE2.GET_OBJ_PROPERTY(hApplication, 'ActiveWindow');
    hPane := OLE2.GET_OBJ_PROPERTY(hWindow, 'ActivePane' );
    hView := OLE2.GET_OBJ_PROPERTY(hPane, 'View' );
    ---- Header Section ---
    OLE2.SET_PROPERTY(hView, 'SeekView', wdSeekCurrentPageHeader);
    hSelection := OLE2.GET_OBJ_PROPERTY(hApplication, 'Selection');
    hFont := OLE2.GET_OBJ_PROPERTY(hSelection, 'Font');
    OLE2.SET_PROPERTY(hFont, 'Name', 'Times New Roman');
    OLE2.SET_PROPERTY(hFont, 'Size', 10);
    OLE2.SET_PROPERTY(hFont, 'Bold', FALSE);
    OLE2.SET_PROPERTY(hFont, 'Color', MyBlue );
    hParagraphFormat := OLE2.GET_OBJ_PROPERTY(hSelection, 'ParagraphFormat');
    OLE2.SET_PROPERTY(hParagraphFormat, 'Alignment', wdAlignParagraphCenter);
    OLE2.RELEASE_OBJ(hParagraphFormat);
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'This is a');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    OLE2.INVOKE(hSelection, 'TypeParagraph');
    OLE2.SET_PROPERTY(hFont, 'Size', 16);
    OLE2.SET_PROPERTY(hFont, 'Bold', TRUE);
    OLE2.SET_PROPERTY(hFont, 'Color', MyDkGreen );
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'Test Header');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    ---- Footer Section ----
    OLE2.SET_PROPERTY(hView, 'SeekView', wdSeekCurrentPageFooter);
    hParagraphFormat := OLE2.GET_OBJ_PROPERTY(hSelection, 'ParagraphFormat');
    OLE2.SET_PROPERTY(hParagraphFormat, 'Alignment', wdAlignParagraphCenter);
    OLE2.RELEASE_OBJ(hParagraphFormat);
    hFields := OLE2.GET_OBJ_PROPERTY(hSelection, 'Fields');
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'Page ');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    hRange := OLE2.GET_OBJ_PROPERTY(hSelection, 'Range');
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG_OBJ(args, hRange);
    OLE2.ADD_ARG(args, wdFieldPage);
    OLE2.INVOKE(hFields, 'Add', args );
    OLE2.DESTROY_ARGLIST(args);
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, ' of ');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    hRange := OLE2.GET_OBJ_PROPERTY(hSelection, 'Range');
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG_OBJ(args, hRange);
    OLE2.ADD_ARG(args, wdFieldNumPages);
    OLE2.INVOKE(hFields, 'Add', args );
    OLE2.DESTROY_ARGLIST(args);
    OLE2.RELEASE_OBJ(hRange);
    OLE2.RELEASE_OBJ(hFields);
    OLE2.SET_PROPERTY(hView, 'SeekView', wdSeekMainDocument);
    OLE2.RELEASE_OBJ(hView);
    OLE2.RELEASE_OBJ(hPane);
    OLE2.RELEASE_OBJ(hWindow);
    -------- Insert Text --------
    hFont := OLE2.GET_OBJ_PROPERTY(hSelection, 'Font');
    OLE2.SET_PROPERTY(hFont, 'Name', 'Arial');
    OLE2.SET_PROPERTY(hFont, 'Size', 12);
    OLE2.SET_PROPERTY(hFont, 'Bold', FALSE );
    OLE2.SET_PROPERTY(hFont, 'Color', myBlack );
    OLE2.INVOKE(hSelection, 'TypeParagraph');
    myText := myTab || 'This text is on the ';
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, myText);
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    OLE2.SET_PROPERTY(hFont, 'Bold', TRUE);
    OLE2.SET_PROPERTY(hFont, 'Color', myRed);
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'first ');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    OLE2.SET_PROPERTY(hFont, 'Bold', FALSE);
    OLE2.SET_PROPERTY(hFont, 'Color', myBlack );
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'page.');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, wdPageBreak);
    OLE2.INVOKE(hSelection, 'InsertBreak', args);
    OLE2.DESTROY_ARGLIST(args);
    ----page 2
    myText := myTab || 'This text is on the ';
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, myText );
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    OLE2.SET_PROPERTY(hFont, 'Bold', TRUE);
    OLE2.SET_PROPERTY(hFont, 'Color', myBlue);
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'second ');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    OLE2.SET_PROPERTY(hFont, 'Bold', FALSE);
    OLE2.SET_PROPERTY(hFont, 'Color', myBlack );
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, 'page.');
    OLE2.INVOKE(hSelection, 'TypeText', args);
    OLE2.DESTROY_ARGLIST(args);
    ---- go to the top of the first page
    args := OLE2.CREATE_ARGLIST;
    OLE2.ADD_ARG(args, wdStory);
    OLE2.INVOKE(hSelection, 'HomeKey', args);
    OLE2.DESTROY_ARGLIST(args);
    OLE2.RELEASE_OBJ(hFont);
    OLE2.RELEASE_OBJ(hSelection);
    OLE2.RELEASE_OBJ(hDocument);
    OLE2.RELEASE_OBJ(hDocuments);
    OLE2.RELEASE_OBJ(hApplication);
    END;
    Please help me out
    Thanks,
    Bhavana

    Click on --
    Edit link for Page> Click "Edit Default" link on Banner >
    Under the "Banner Links"
    provide value something like this:
    Label = Help
    URL = /pls/portal30/docs/myhelp.html
    Icon = U can upload any icon here.
    For Application Components = See the Second Last tab on "Edit Component".
    Thanx,
    Chetan.

  • How to enable root on mac on 10.9.2 and how to set the password for the same ?

    how to enable root on mac on 10.9.2 and how to set the password for the same ?

    http://support.apple.com/kb/ht1528
    Follow the steps for Lion.
    But, why are you doing this? I've never found the need to do that.

  • Can i set the timing for individual photos in a slideshow

    there are text pages that need to be read but not at a 4 second speed
    it has to be slower more time
    syncing to music i compose is a must
    can each individual photo have its own time
    i hope so or else they ruined a wonderful product
    with this limitation

    Glen:
    Yes, you can. Under the slide there's a button titled "Adjust'. Click on it and you can set the time for that slide, the transition, etc.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Maybe you are looking for