Scracht disks are full

When Im using ilustrator or photoshop i have a little window saying
¨Could not complete the command because the scratch disks are full¨
I have a 639,79 GB capacity
Available 620.59 GB
Used 19.2 GB
Under about this Mac
i have 13 GB
how can I do to fix this?

Instability is only a problem when programs run out of room completely and they are trying to use it as a scratch at the time such as in this case. That said often the space is preallocated so it wont be an issue anyway.
The speed is degredation is
a) partially due to fragmentation which happens as a partially filled disk is continually used rather than the amount of data on the drive. It's possible to have 0% fragmentation and 100% full
b) drives will read faster at the outer areas of the drives (which spin faster in a relative sense) than at the centre of the drive platters. Depending on your formatting and drive type this may or may not be noticable.
specifying a percentage that should remain empty is meaningless as it will depend on how big your drives are, if they are raided at all, what they are used for etc. I wouldn't completely fill a system drive as this will cause problems but i also wouldn't waste 150Gb of space of a 500Gb drive for no good reason.
BRETT

Similar Messages

  • I am getting an error message that reads "Cannot ___ because the scratch disks are full."

    I have had Photoshop Elements 12 on my Macbook for less than a month (free Trial). For the past few days I keep getting an error message that says "Cannot ___ because the scratch disks are full. Can someone please tell me how to fix this problem?

    How much free space is there on the drive where PSE is installed?

  • Could not place picture, scratch disks are full

    Hello, after fresh installation of Windows 7 ultimate on a PC (Intel Core-i5, GA-H97, 8GB RAM, 120 SSD for system, 1TB for data), and Photoshop CC 2014, we have a problem:
    When  trying to add a picture to a new Photoshop document we get the following error message: "Could not place, because the scratch disks are full".
    On C: (the SSD) there is 70GB free space, on D: there is 900GB free space.
    I've defined both disks as scratch disks, then tried to define either of the disks as scratch disk - nothing helped!
    Could you please help us ASAP?
    Thanks in advance.

    Good day!
    Have you restarted Photoshop after changing the Performance Preferences?
    Using the System drive as Scratch Disk is not prudent if it can be avoided.
    Please read this:
    http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html
    Regards,
    Pfaffenbichler

  • Could not complete your request because the scratch disks are full

    i have more than enough disk space in my PC
    not sure at all what this message means: "could not complete your request because the scratch disks are full"
    please help
    Thank you

    It means that the operation you tried to do would have filled all of your scratch drives.
    Check your Photoshop preferences to make sure you have the drives assigned correctly.  And double check your settings (like the crop tool with a high resolution specified) for the particular operation that fails -- most likely it is trying to create something huge that would fill your scratch drives.

  • Could not complete your request because scratch disk are full

    Everytime I try ti crop a image I get this.
    Could not complete your request because scratch disk are full.
    Thanks in advance

    You entered a resolution in the crop settings, and Photoshop is now resampling the cropped area as you instructed -- creating a document too big for your scratch disk.   Take the resolution out, or reset the crop tool.

  • Can't open tif file. "Scratch disks are full"

    Version: Photoshop CS5 12.0.4 64 bit
    Scratch Disk: 6.67 GB of available space on my scratch disk (C Drive). I've allocated 90% (2686 MB of my available 2984 MB of RAM to Photoshop).
    File I'm trying to open: 39 MB tiff file
    I have nothing else open in Photoshop and no other applications open. Even so, I get the message "Could not complete your request because the scratch disks are full" when I try to open the file ... yet when Photoshop itself opens, it still claims to have 6.67 gigs of available space. 
    The file I'm trying to open is a 39 meg tiff with a few smart objects in it.
    I just opened a 23 meg tiff with a few smart objects in it, with no problems.
    I just opened a 39 meg (same size) psd (no smart objects), with no problems.
    Why does this 39 meg tiff file cause Photoshop to say the scratch disk is full?
    Thanks in advance for your help!

    Welcome to the forum.
    As others have stated, the problem is most likely just a lack of HDD real estate, and as also mentioned, if your Windows Virtual Memory (Page File) is dynamically managed (the default setting),you probably have even less, that what is being reported.
    One major consideration is that a HDD begins to lose performance, when it reaches about 70%, and this is cumulative, in that the closer one gets to capacity, the slower the performance. Also, as one approaches capacity, the liklihood of a failure increases.
    Treat yourself to an additional HDD, clean up your boot disk, and many things will improve.
    Good luck,
    Hunt

  • After re-installing photoshop elements following a HD crash, i get the following message after clicking on PE icon, "could not initialize photoshop elements because the scratch disks are full".How can this problem be resolved?

    after re-installing photoshop elements following a HD crash, i get the following message after clicking on PE icon, "could not initialize photoshop elements because the scratch disks are full".How can this problem be resolved?

    dgrparker a écrit:
    photoshop element 2.0 - on windows 7. the program ran fine on the old HD, but this error popped up when I re-installed it on the new HD
    Elements 2.0 is an old version. The message may be due to the fact that your new HD is much bigger than your older one, and not due to the classical reasons:
    http://www.easyelements.com/scratch-disk-is-full.html

  • THE SCRATCH DISKS ARE FULL

    I can not complete any action while in photoshop because the scratch disks are full. I have already run into the Performance Preferences and allowed the program to use the 7.09 GB I have of free space. What else can I do? Help please, I am about to throw out the laptop through the windows....

    If the scratch disk must be contiguous, then the defrag will help. It's unclear from Adobe literature whether this is true. In fact, from the literature, I'd say it's not, as they only mention "contiguous" and "RAM" together (from my super-thorough googling). I certainly understood it to be contiguous, but I misunderstand a lot.
    This Adobe doc might be of use to the OP:
    http://kb2.adobe.com/cps/316/316693.html
    (and doesn't defragging free up space too? I used to defrag unix boxes a lot and would save between 24 and 32k each time. YMMV )

  • "Could not initialize photoshop because scratch disks are full."

    "Could not initialize photoshop because scratch disks are full." This is the error message that pops up when I try to open my Adobe Photoshop Elements 2.0. I just installed this program on my new HP Pavilion Model h8-1214, which has 1.8 TB of space with 10.0 GB of RAM. I have read forums on this problem, but they tell how to fix the problem through Photoshop. How do I fix the scratch disk settings without being able to open Photoshop? Please help me with this problem for the Adobe Support team will not even answer my question..
    Thanks.

    By far the easiest solution is to upgrade to photoshop elements 10 or newer, which has no problems with big hard drives and has some new features you may like.
    It's available for a thirty day trial.
    Actually versions pse 3 and later have no problems with large hard drives.
    Here are a couple things you can try which might work:
    Option 1: Just after double clicking on the pse 2 shortcut press the Ctrl+Alt keys and keep holding the keys until you get the scratch disk preferences dialog
        then choose your recovery partition as the First. This would only work if you have a recovery partition or another smaller hard drive installed that you can use as the scratch disk.
       (i don't have a recovery partition on this computer)
    Option 2. Shrink (shrink volume) your present hard drive down to 1 tb
    Option 3: If you have windows 7 pro or ultimate you can use virtual xp (downloaded from microsoft)

  • "Could not initialize Photoshop Elements because the scratch disks are full"

    I have just installed Photoshop Elements 2 on my new computer.  When I try to open the program, I get the message that the scratch disks are full !!!  It's a new computer --lots of memory and almost no programs installed yet.   The program works perfectly fine on my old computer...never have gotten a message about scratch disks.
    What do I have to do to get Photoshop Elements 2 to work on my new computer?   And please don't tell me to buy a later edition of Photoshop Elements!  I already have Version 9 as well, but I tend to use Version 2 more for simple tasks.

      Is it not possible to launch any part of the program? Even going to a folder and right clicking an image and choosing “Open with Photoshop Elements” or double clicking the application “PhotoshopElements” in Program Files\Adobe\Photoshop Elements
      Program Files (x86) on Windows 64 bit.  It’s not clear what you can do otherwise.
    Normally scratch disks are allocated through preferences e.g. in PSE2
    Edit à Preferences à Plug-ins & Scratch Disks
    First disk is normally allocated to start up and you need to allocate the second to the C: drive or other volume.
    You can check this if you still have PSE2 working on an old machine but unless anyone else can think of a solution you may be stuck.
     

  • Scratch disks are full

    PS CS3
    I am trying to crop a JPG slightly to get a specific size. I have set the size in the toolbar of the crop tool and draw the crop mask, but when I try to complete the crop it says "Cannot complete your request because the scratch disks are full". I have two disks on this machine, one with 26GB free and the other with 77GB free and this is only a 250x970px image. I did several prior crops on the same image among other operations, but wanted to use the exact size on this one since it needs to fit in a rotating banner for a website. I can crop it if I leave out the exact size, but then, of course, I am only guessing at the size.
    What's up and is there a workaround?

    That did it ... I saw pixels per inch next to resolution and figured that I was typing in pixels, but closer inspection revealed in ... so I guess 970 in x 238 in was a bit big for it!

  • Please help... "Could not initialize Photoshop becauae the scratch disks are full.

    I am using Photoshop 7 on Windows Vista. I just bought a new computer and installed Photoshop (which worked fine on my old computer running XP). It installs correctly but wen I launch it I get the error "Could not initialize Photoshop because the scratch disks are full." Then Photoshop immedietly shuts down.
    My C drive has 1.3 TB free, my D drive has 145 GB free and my E drive has 5 GB free. I've tried defragmenting all the drives and deleting any temp files.
    I do not know why this is happening and would greatly appreciate any advice.
    Thank you,
    Brad

    there's a bug in 7 that causes this on drives with more than 1 TB free. upgrade photoshop to fix it or temporarily fill the drive with garbage or partition it so the free space is less than 1TB.
    a side note is that current upgrade policy only gives special pricing to 3 versions back. right now that's version 7. if you wait until cs4 comes out you'll be 4 versions back and will be out of the upgrade path. then if you want a higher version in the future you'll have to purchase a full license again. if planning on upgrading photoshop - ever - suggest you do it before cs4 ships.

  • Cannot complete your request because the scratch disks are full

    When I attempt to crop a photo I get this message: Cannot complete your request because the scratch disks are full. In fact one scratch disk has 62+ GB and the other has 52+ GB available. Does anyone have a solution for this?

    @Mylenium: My computer is running 64 bit Windows 7 Pro, 16 GB Ram, AMD Radeon 6900 series with I don't remember how many GB of ram (I installed it maybe 2 1/2 or 3 years ago). I have 4 physical hard drives with Raid 0 and Raid 5 configurations. I have been using my system full bore since I built it, and the entire configuration has been excellent for my processes until now. Is there any other specific information that you would need to have an idea of what the problem may be? Thanks.
    @ JJMack: My scratch disk available volumes were wide open with 62 GB available (S: drive) and 52 GB available (O: drive). I'm puzzled because I have used this configuration on my computer for the past 2 1/2+ years with flawless function. I'm not new to setting up and configuring my computer, but I'm new to this odd error message.

  • Error message "cannot use the spot healing brush because the scratch disks are full.  What does this mean? PSE9

    Tried to use the spot healing brush and clone stamp and got error messages "cannot use because the scratch disks are full."  What does this mean? PSE9

    Elements uses drive space to make its calculations, like someone writing down measurements on a scrap of paper. How much free space is there on your hard drive?

  • I am getting an error message that reads "Cannot ____ because the scratch disks are full. How do I go about clearing this? I have a Macbook. Thanks.

    I have only had Photoshop elements on my computer for less than a month (free trial). The past few days I am getting an error message whenever I try to do anything that reads "Cannot __ because the scratch disks are full." I do not know how to fix this problem. Any advice would be greatly appreciated!

    Photoshop Elements Mac user
    If your program is Photoshop Elements (any version) you have posted in the wrong forum. Somehow your thread has been posted in the Adobe Premiere Elements Forum (video editing).
    Please re-post your thread in the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread here and move it from here to there.
    Photoshop Elements
    Think about.....Sounds like you do not have enough free hard drive space for editing. In your Photoshop Elements Mac case, please check out Photoshop Elements/Preferences/Performance and the Scratch Disk area.
    Photoshop Elements Help | Scratch disks and plug‑ins
    ATR

Maybe you are looking for

  • Is there a way to check to see if an IMEI has been submitted for unlock?

    I wanted to ask is there is any way to check IMEI numbers to see whether or not they have been submitted to Apple for an unlock?? I have two phones I need to check, and iPhone 4 which is my daughters and was a birthday present, and an iPhone 5 which

  • Difference between Scheduling lines and Delivery schedule

    Hi SD Experts can u say me the clear difference between Scheduling lines and Delivery schedule. where we will maintain deliver schedule. whether delivery schedule is automatically created along scheduling agreements.. with regards James

  • Change WBS's statistical WBS element

    Hello; We use the SAP PS module. I create the WBS and WBS's statistical WBS element (XSTAT) set the true. I need the change WBS's statistical WBS element and set the false. But WBS's statistical WBS element read only on the screen. How is change WBS'

  • Change Font in Master pages so that it changes the rest of the template?

    I cannot change my font in the Master pages so that it effect the rest of the template. I would have to go through each of the page and change the font. I just want the body paragraph a certain font and I don't know how to do that. I don't know if I

  • Cross browser issue?

    hello, I have a flex image app here: http://brandonandpatty.com/?page_id=6. Works fine in firefox 3.0.4 and Opera 9.27. However, there is a strange issue in IE and Chrome - the thumbnail images show up fine, but when you click one to display a larger