Scrap HU via HUMO - mvt type 551 doesn't req internal order

Hi there --
I want to require Internal Order (CO/PP order) on movement type 551 / scrap transactions. I made the CO/PP order a required entry via OMBW, and now when I process a 551 via MB1A, the internal order is required as expected. However, if I scrap a handling unit via HUMO (Edit > Change HU Posting > Other Postings > Pick for scrapping), the system does not require (or even allow) me to enter an internal order. I am able to save the transaction, and a 551 movement is processed without an internal order on the FI posting.
Any ideas on what's going on here and how I can ensure that the order number is required in HUMO for scrap txns???
Thanks!
Allison

I logged an OSS note with SAP about the inability to support the internal order number entry via the HUMO transaction.
They replied:
Unfortunately there is no standard possibility to make this field
available for any movements with HUMO (Main Program SAPLHUMO) in
standard. You only will reach your expectation with a modification in
the logic of the SAP Standard solution. Please check note 170183.
The customizing table MIGO_CUST_FIELDS, is where fields are set to
obligatory or optional.  This table is specifically for setting fields obligatory or optional
when the movement is done through the transaction MIGO and other IM
transactions. The table description for MIGO_CUST_FIELDS as follow-
[MIGO: Field Selection per Movement Type]
Has anyone attempted this type of Mod?

Similar Messages

  • Write-off (Mvt type: 551) in batch

    Hi experts, as titled, I am looking for ways to do write-off using movement type 551 in batch, as in doing write-off for a couple of sites (stores) at the same time.
    I have come up with below.
    1. Either to do stock adjustment (e.g. MIGO, MB1C, MB1A) in batch, but the standard only supports doing adjustment one site by one site
    2. Use T-code MI31 which supposedly can support adjustment in batches, but it has predetermined movement type of 701/702.
    Would you have other greater methods for this scenario?
    Thanks and BR
    Dom

    Hi Dom,
    what do you mean one site by one site? Each document line has it's own plant, you can have different plants in different lines...
    regards,
    Edgar

  • Add New field in OMJJ for MB1B mvt type: 303

    Hello Experts,
    I need your help in resolving an issue:
    I am tring to add a Field: "LFSNR" in OMJJ for Tcode: MB1B and Movement type: 303. but i am getting the error: "Field LFSNR is not
    allowed for transaction type 303" as this field doesnt exist in table: T156B / MIGO_CUST_FIELDS.
    Please help me with your thoughts as how can i add a new field to T156B / MIGO_CUST_FIELDS and then in OMJJ for 303 mvt type.
    We are on ECC 6 EHp4.
    regards
    Venkat

    Hi Venkat,
    You may check this first: Re: Scrap HU via HUMO - mvt type 551 doesn't req internal order
    Thanks,
    Gordon

  • Reversal of Mvt type 552(MB1A) still doesn't reflect in the Process order

    Hello Experts,
    When i create in MB1A using  551 movement type(scrap), i fill the required entries Cost Center and Proces order then saved it. Checked the process order cost analysis (GO TO- COSTS - ANALYSIS- TARGET ACTUAL COMPARISON)there were values appearing in my total/actuals cost column.
    Then my issue is if i want to reverse the said document generated from 551 movement type using tcode MB1A or MBST, the value in the cost analysis is not changing((GO TO- COSTS - ANALYSIS- TARGET ACTUAL COMPARISON) in the process order.
    The reversal is done so it should be zero and no value is appearing in the cost analysis column.
    Also if you will check in the Process order- GO TO-LISTS- DOCUMENTED GOODS MOVEMENTS , the mvt type 551 only appears and no 552 even the cancellation is already performed.
    Thanks,
    Indra

    Which version of SAP are you using?
    Could you please perform same action in development using MIGO transaction code.

  • Hide/Suppress Cost center field in MIGO and MB1A for movement types 551&552

    Hi All,
    Can anybody tell me how to suppress or hide the cost center field in MIGO or MB1A for movement types 551 and 552?
    I did below settings and it worked fine for only MB1A and for MIGO still it is showing cost center field.
    IMG > Materials Management > Inventory Management and Physical Inventory >Goods Issue/Transfer posting > Define screen layout > select movement type to change the option.
    Also I did gothrough the settings for Enjoy transaction (MIGO) there we have only option to make fields either  "Required entry" or "Optional entry" and we don't have an option to hide/suppress.
    Please advise or help me .
    Thanks in advance!
    Regards,
    Praveen

    Hi
    The cost center field is a required field in mvt type 551 as you are scrapping materials, some cost center will need to take the cost of this operation.
    Anyway, you first need to make the field as optional for example, before you move.
    One option is that you create a screen variant in Tcode SHD0 for MB1A, where 551 is setup as constant (with content) , and mark Cost center as invisible and assign this screen variant to a transaction in SE93.
    regards
    Sidi

  • Using movement type 551 in Production Order

    Hi all
    I want to do a mvt type 551 of components to the Production order but it allows me only a 261 movement type. Is there a way we can do that.
    thanks

    Hello John,
      551 is a transaction for scrapping inventory against a cost center. In a way, 261 is doing the same txn by moving inventory from stock to Process order.
      Why are you trying to perform a 551 against a process order? There might be another solution to the business issue.
    Regards,
    Anand

  • BAPI_GOODSMVT_CREATE missint item_text on mvmt type 551

    Hi,  
    I am using the BAPI_GOODSMVT_CREATE to move material from blocked stock to scrap.   We use movement type 551 for this.   This works correctly using the normal migo process.
    When I do this uning the bapi I loose the item_text which is normaly saved in the material document.  Otherwise the document processes correctly.
    Any ideas why this woruld happen?
    John.

    In my case the goods movemnet does not involve a reservation.   Under normal circumstances the user would process this transaction using migo and the material document would show the transaction as migo_gr.   When processed using the bapi the transaction mb1A is listed.
    All parameters in the material document are identical with the exception of the item_text.
    I will ask for the sap note to be implemented in the hope that it will fix the problem.
    John.

  • 531 or 101 mvt type??

    Hi gurus,
    When a process order is done and confirmed via co11n or co15
    When do the GR happens??
    Does the GR happen with 101 or 531 mvt type?
    What are the differences between 531 and 101 mvt type??
    A little explanation on what are the correct mvt types used in process orders in secuence beginning when issuing materials from WH?
    This info would be highly appreciated
    Thanks

    Dear
    Find the answers of your questions
    When a process order is done and confirmed via co11n or co15 : Once the Process Order has been REL , Materails are Issued -MIGO -261( GMPS )  , you can carry out confirmation .
    When do the GR happens?? : After the Process Order Confirmation done , you can carry out GR-MIGO-101
    Does the GR happen with 101 or 531 mvt type? : Gooods Reciepet against Process Order is always against movement type 101 not 531 .
    What are the differences between 531 and 101 mvt type?? : If you have any low value item produced along with your header item as bi-product , you can keep this item as negitive qty in BOM   so that it will be  a  negitive goods issue ( addtion to invetory )  aginst the Process Order .At that time , MIGO-261 automatically triggers 531 for that Bi-product ( Example -Fertiliser Industry having gupsum as bi-product )  so it will be postive qty to stock .
    A little explanation on what are the correct mvt types used in process orders in secuence beginning when issuing materials from WH? -261
    Regards
    JH

  • How an AUC asset class can be assigned to internal order type

    Hi
    We want to create new AUC asset class for our requirement. For that purpose we want to use existing internal order type of my new AUC asset class also. When we create internal order in KO01 and create AUC in same step new asset class should be picked up. Please explain me how we assign internal ordet type to AUC.
    Regards
    Padma

    Hi Padma
    Do the following configuration steps for AuC scenario.
    1. Asset under Construction
    1.1 Define Screen Layout for Asset Master Data
    IMG Investment Management Internal Orders as Investment Measures
    Master Data Assets under Construction Define Screen Layout for
    Asset Master Data
    1.2 Define Asset Classes
    IMG Investment Management Internal Orders as Investment Measures
    Master Data Assets under Construction Define Asset Classes
    2. Asset under Construction
    2.1 Define Model Orders
    IMG Investment Management Internal Orders as Investment Measures
    Master Data Orders Define Model Orders
    2.2 Define Order types (KOT2_OPA)
    IMG Investment Management Internal Orders as Investment Measures
    Master Data Orders Define Order Types
    2.3 Define Investment Profile and Assign
    IMG Investment Management Internal Orders as Investment Measures
    Master Data Define Investment Profile
    3 Settlements
    3.1 Maintain Allocation structure
    IMG Investment Management Internal Orders as Investment Measures
    SettlementMaintain Allocation Structures
    1.2 Maintain Settlement Profile
    IMG Investment Management Internal Orders as Investment Measures
    SettlementMaintain Settlement Profile
    3.3 Maintain Number Ranges for Settlement Documents
    IMG Controlling Internal Orders Actual Postings Settlement
    If you want budgetary control also do the following steps:
    3 Planning and Budgeting
    3.1 Maintain Planning Profiles
    IMG Investment Management Internal Orders as Investment Measures
    Planning and Budgeting Maintain Planning Profiles
    3.2 Maintain Budget Profile
    IMG Investment Management Internal Orders as Investment Measures
    Planning and Budgeting Maintain Budget Profile
    3.3 Define Tolerance Limits for Availability Control
    IMG Investment Management Internal Orders as Investment Measures
    Planning and Budgeting Define Tolerance Limits for Availability Control
    Regards
    Kiran

  • Internal order types and number ranges

    We have two SAP instances and want to load Internal order types and number ranges and Internal orders from 4.6 to 4.5 version.
    I need to determine if there is an overlap of number ranges for the internal order types used in 4.6 and 4.5
    Could you please help me how to approach? Manually verifying each range in both system is a tedious job and very confusing as the numbers are too big.

    Hi,
    I can suggest one thing which seems to be worth trying. Involve one technical guy in downloading the number ranges as well the orders of the numbers used from both the system and compare it. Then compile them and upload it again.
    Trust this helps much!
    Cheers!

  • Scrapping via Usage Decision in QM Mvt type 553

    Hi All,
    I am trying to post a scrap in QM via Usage decision using mvt type 553.  When I do the Usage Decision to scrap, instead of processing the movement, I get the Goods Issue initial scree.  I expect that the stock posting should go into scrap with mvt type 553. Anyone had a smilar issue in the past.
    Thanks for any inputs.

    I can't say I've seen this behavior before in the system.
    My guess is that someone has enabled a user exit somewhere in your system that is causing this behavior and it has little to nothing to do with the QM UD.  The user exit may not have been written to take into account when a particular positng is done by the UD process in the background and is forcing behavior to run MB1A with a specific movement type.
    I would run this in debug mode with a programmer to try and identify where and how the movement type is being modified.
    FF

  • OMB6- scrap material with 551 mvt type

    dear experts
    even though I put the cost center as optional for the movement type 551, in OMB6 and also on the program  RM07CUFA.
    When I do a MIGo and use 551 movement tyype the system is asking for a cost center as a mandatory entry, even though I put Gl acct in the acct assignment on MIGO.
    Please let me know, how can I just scrap material without inputting cost center or a profit center.
    Thank you
    MSJ

    You probably cannot, if you use profit center and cost center accounting, you may want to ask your FICO collegues for confirmation.
    But in OKB9 you can setup a default cost center for this process.

  • Single Report for production scrap and Movement type 551 scrap

    Hi All,
    Can we include the scrap information from production and scrap from movement type 551 into a single BW report?.......My assumption is we cannot include it into a single report coz production scrap will have a different material information and scrap from movement type 551 will have a different material information..please correct me ig i am wrong......
    Regards,
    Shravani

    hello,
    you can have a single report by two options
    1. have a variable on movement type.If you choose 551..U will get materials of tht movt type.
    also if the select teh movt type for prodcution, it wil display its materials.
    or
    2. U have to place  movt type in the rows.Place movt type and then material in the rows.
    Then u will get for each movt type..its corresponding materials.No variable selection needed here.
    Regards,
    Dhanya

  • MB1A, mvmvt type 551 error while scrapping serialized Tool

    User tring to scrap a serialized Tool using mvmt type 551 , T code Mb1a but as soon as enter serial number system throws the below errror message.I have checked GR in Migo and this serial number exist in IQ03 not sure what do now?
    System status INAC is active (EQU 10009104)
    Serial number A244MY41HW0687 cannot be used here

    Hi,
       Before Scraping the Serial Number Status should be ESTO... then only you can do scraping... the Status INAC means the Serial Number is inactive... so you are geting the error.
    To Activate the Serial Number please do the follwoing.
    1. Txn. IQ02..
    2. enter the Material number and serial number..then hit enter..
    3. From the menu...MatSerialNumber>Function>Activate<->Inactive-->Activate
    Regards
    GK.
    Edited by: Gnana Kumar on Nov 19, 2010 7:40 AM

  • Mvt type 313 Q via delivery not allowed

    Hi,
    We have a scenario in our priject where the material (project stock) has to be moved from a srorage location to the customer site which again has been defined as a storage location. For this we have enabled the stoarge location to storage location transfer stock transport order functionality. Now when I create a new STO (sloc to sloc transfer) document type UB a new delivery type XYZ to which mvt type 313 has been assigned gets determined properly. Then I create an o/b dely using Txn VL10B.
    The problem starts here. When I try to do the GI I get the following error:
    Update control of movement type is incorrect (entry 313 X X Q L _ P)
    Message no. M7226
    Diagnosis
    The system could not find entry 313 X X Q L _ P in any of the movement type control tables.
    Procedure
    Cancel current processing.
    Contact your system administrator.
    Action to be taken by the system administrator
    Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
    If the entry is missing, proceed as follows:
    For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
    For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
    This error is because of the mvt indicator L determined for which we do not have entry in update control in OMJJ. If I do this mvt 313Q and 315Q without a dely document it is allowed.
    Is there any other way to work this out?  Is there a way to add entry 313 X X Q L - P to OMJJ update control?
    We need to have the delivery document as the material is crossing country borders when it moves from one sloc to the other.
    Regards,
    V S

    313 is a  manual movmement which does not even allow a Q special stock.
    deliveries operate with automatic movements starting with a 6
    641 Goods issue for a stock transport order (Shipping)
    The quantity is transferred using a delivery in Shipping from unrestricted-use stock of the issuing plant to stock in transit of the receiving plant.
    The goods receipt for the stock transport order takes place using movement type 101 and can, if required, refer to the purchase order or to the delivery. If a purchase order item is flagged as a returns item in the stock transport order, you can post the goods receipt of the returns in the issuing plant with movment type 671.
    Possible special stock indicators:
    E, Q
    For the special stock indicators E and Q and for purchase orders assigned to an account, you must ensure that the quantity is not posted to the stock in transit of the receiving plant.

Maybe you are looking for