Scrapbook and Snapshots screensavers no longer work after Yosemite upgrade

Upgraded to Yosemite and discovered that the Scrapbook and Snapshots screensaver modules don't work now. Here's how they appear in my screensaver preference pane:
The Scrapbook screensaver doesn't work at all; the Snapshots screensaver will load but isn't fully functional - it only displays a single photo at a time, it doesn't show the background photos any more. Snapshots was my preferred screensaver too. Any thoughts besides a clean reinstallation of Yosemite?
MacBook Pro (Retina, 13-inch, Late 2013)
2.6 GHz Intel Core i5
16 GB 1600 MHz DDR3
500 GB Flash storage
Intel Iris 1536 MB

I saw, from a clean install of Yosemite of a friend, that these two screensavers are not there.
Probably I have brought them back from Snow Leopard.
I would like to remove them from the list of screensaver (or recharge the list of default screensaver), you know if it is possible and how?
I thought I would delete the file screensaver.plist, but I would not combine damage.
Thank you and hello

Similar Messages

Illustrator will no longer work after Yosemite upgrade!!!

I downloaded Yosemite on my Macbook Pro and now Illustrator will no longer work. A warning pops up that I need the newest Java runtime which I already have. What should I do? Please help

Prompted to install Java SE 6 Runtime | Mac OS 10.9
Mylenium

Dreamweaver doesn't work after Yosemite upgrade.

Dreamweaver doesn't work after Yosemite upgrade, it asks to install Java Runtime SE 6, I've tried that, I've also installed latest Java and it still won't boot, keeps asking for for Java Runtime SE 6

You need http://support.apple.com/kb/DL1572
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Numbers 09 and Pages 09 no longer work after 10.6.5 update

I have the last version of iWork 09. After the 10.6.5. update Numbers 09 and Pages 09 no longer work.
Keynote 09 is fine.
Both Numbers 09 and Pages 09 open, the window for choosing a template also opens.
I am not able to choose a template. Waited for several minutes ... no chance.
Removed the software, re-installed from DVD, updated to the latest version ... this did not solve the problem. Contacted Apple support , went through many steps with no success.
Were you able to use Numbers 09 and Pages 09 after recent Mac OS X update ?
Any ideas what I could do ?
Thank you for help!

May you try to run the applications from an other user account ?
If they behave flawlessly, the culprit is in your original user account.
In such case, it's often one or several preferences files which are corrupted.
Try to
quit the applications,
move the preferences files :
<startupVolume>:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Numbers. plist
<startupVolume>:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Pages.pl ist
to the desktop
restart the apps.
If they behave flawlessly, you know the culprits. Trash them.
Yvan KOENIG (VALLAURIS, France) dimanche 14 novembre 2010 19:34:52

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

Share option for email does not work after Yosemite upgrade.

Hi,
Does anybody know why the share option, "Share via email" does not work anymore after Yosemite upgrade? I love this feature. It's just quick and easy.
Rod.

On Yosemite, Pages '09 v4.3 no longer recognizes the Share > Send Via Email categories. You will have to export and manually drag/drop/attach documents to Mail. There is no fix.

HT1338 motion 4 will not work after yosemite upgrade

motion 4 will not work after yosemite upgrade

To be honest I do not use motion or any other compositing app so i do not miss it personally. However the new Motion is not that expensive, around $60 i think. Still, I understand your frustration.
I am afraid the more the OS is updated the less compatible certain applications will become.
Good Luck
h

CP60-615DX Touchpad and external mouse no longer work after WIndows 7 SP1 update

Let me start by saying I am in the IT field, though clearly far from being great at it. I was updating a CP60-615DX at work with Win 7 x64 SP1. It installed with no errors or anything I'd consider abnormal. Once it was finished, the touchpad no long worked, as well as any mouse I'd hook up via Usb. So I checked Device manager, and the Touchpad is listed with the yellow exclamation mark, as well as mice I hook up. So I did what any respectable IT guy would do, I went to HP and downloaded x64 drivers for the Touchpad port and installed them. But they didn't fix the issue, literally nothing happened. So I installed the latest chipset drivers. Still nothing changed. So I uninstalled the device and manually added it by doing the advanced driver install for a new device, pointing it to the directory where the .exe file had placed the drivers. ...Nothing. So I uninstalled SP1,.... nothing. After uninstalling SP1, redid every aforementioned step, nothing. So my question is, **bleep**? Anyone know another way to fix an issue where the scrolling devices stop working and the drivers won't fix the issue?
Btw, the user had never set up windows restore, and my only other thought is pulling personal documents off and restoring to factory defaults. One more bit of info before I forget, when I went into Windows Recovery (which loads a pre-environment mini OS for you to restore and fix issues), the mouse worked, telling me it's not a hardware issue, it's a Windows vs devices issue.

Hi,
According to your description, since system reinstallation is not helpful, it's probably a hardware problem, it would be better to check if it is the device itself problem.
Roger Lu
TechNet Community Support

Volume and Eject Keys No Longer Work After Boot Camp 2.1 Update

Earlier this evening I allowed the Apple Software Update app in Windows to update Boot Camp to version 2.1. I allowed the computer to restart following a successful installation of the update. I've restarted two more times since then. Ever since the update (including before the computer restarted for the first time following the update), the volume and eject keys on my keyboard don't work. I also have an Apple Wireless Keyboard (one of the 2003-2007 era white/clear ones) and it exhibits the same problem. Both keyboards otherwise work fine. The computer also otherwise works fine, and there's no evidence of any driver problems.
Some other potentially relevant information:
1- The Boot Camp icon is no longer present in the Windows System Tray.
2- The Boot Camp Control Panel is still present in the Windows Control Panel and it works fine.
3- All settings in the Boot Camp Control panel are unchanged from their defaults. In particular, I have confirmed that "Use all F1, F2, etc. keys as standard function keys" is still unchecked.
4- The Windows Device Manager properly recognizes both keyboards as Apple Keyboards.
I'm using Windows Vista Ultimate on an early 2008 MacBook; system specs are in my signature. Any ideas?
Thanks for taking the time to read this, and double-thanks if you can respond with any suggestions!

Ah, the joy of working with computers...:( Apparently, from my woes with the same problem, the Apple Keyboard Manager is rightfully entered into the Run directory in the Windows registry at HKLM/Microsoft/Windows/Current Version/Run.
Why it doesn't start I still have to find out, but this may be because I have Parallels Workstatio installed as well and switch back between a virtualized Windows and a Bootcamp Windows. However, after installing Bootcamp 2.1 first and then SP3 IN THE BOOTCAMP ENVIRONMENT everything seems to work, except the Energy Options taskbar icon and Apple Keyboard Manager.
Will keep you posted on any progress I make.
Apple Support, BTW, was absolutely abysmal, with them even refusing to accept the ticket at all, on the grounds that they have no knowledge about Windows. Apple, get your support fixed!

This Nightly feedback, Steganos password Manager drop and drag functionality no longer works after last update.

Cut and paste still works but the drop and drag so longer works.
This for Nightly Beta 64 bit.

I too have the problem: W7 64 bit. Drag and drop worked until yesterday when I "upgraded" to FF v 26.0 - I can no longer drag passwords etc from my password manager to website fields - a barred circle appears when I try to drag.
I tried pressing ESC (one profferred solution) and also reset FF to no avail.
This is more than annoying: some of my passwords are dozens of characters long and there's no way I can access sites by typing them in! I need a solution, even if it's reverting to a previous version.

Forms HOST command no longer works after database upgrade from 10g to 11g

Hi,
After upgrading the database 10g to 11g the forms HOST command no longer works on Unix server. The form used to work fine prior the upgrade. I read all the threads I could find and did not see any solutions. Adding PATH and LD_LIBRARY_PATH does not work because it does not even run a basic shell script. (I saw this solution, adding PATH and LD_LIBRARY_PATH, in many questions / threads).
1. I wouldn't expect the database upgrade to be an issue, but it is the only change we had.
2. Note, 11g is Oracle Fusion Middleware which is quite a bit different than 10g.
I even tried the most basic commands like "echo" which is a build-in Unix command and there is no directory for it (ie. no /usr/bin - so variable PATH is irrelvent). i.e HOST('echo hi'); and HOST('echo "hi" '); and even HOST ('echo hi > /my_file.txt'); all returns FORMS_FAILURE (actually the if is IF FORM_SUCCESS THEN ... else ... and the else part always runs now - whereas it didn't before.).
Or basic commands like /usr/bin/ls as in HOST(/usr/bin/ls). At that point I was just testing the Unix command would return FORM_SUCCESS even though I could not see the results (because they weren't writing to a log file). Notice that I'm using the direct path /usr/bin so no Unix environment variables were needed.
The form does use webutil but that part works. For example, we have webutil_file_transfer( ....) The file shows up on the application server and in the expected directory.
Here's the main goal. Upload a file from clients local PC to the datebase server. The form uploads the file to the Application server, then we have a Unix script to scp (secure copy) the file from the application server to the database server. IF webutil, or any other Oracle functions could put the file on the database server that would be better. But, I don't know of any procedures that do that - or would have done it cleanly (i.e. storing to database and write back to server and then using a blob etc. )
Anyway, I was hoping someone would help with either of these.
1) Get the HOST command to work. - If we can get that to work then I wouldn't need any more help. We can just call the already existing Unix script to copy the file from the application server to the database.
2) OR be able to upload directly to the database server - wanted to do that originally
Any help would be appreciated

Solution for those interested and for anyone else searching this forum for a solution
I found this on My Oracle Support:
<h3>Host Command from Forms Not Working in 11g in Sun Solaris Sparc OS [ID 1157346.1]</h3>
Applies To: Oracle Forms - Version 11.1.1.1.0 and later
Sun SPARC Sun OS
Symptoms:
When trying to execute a Shell script or any OS command using the host() Built-in from Forms 11g, the host()command is not getting executed. The same functionality works on other operating systems and in previous versions like 10gR2.
Steps to be followed:
1) Take a backup and edit the $DOMAIN_HOME/config/fmwconfig/servers/WLS_FORMS/applications/formsapp_11.1.1/config/default.env or any custom environment file.
2) Locate the following environment variable:
LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) Comment out this variable. After the changes, it will look like the following:
#LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) a) Instead of LD_PRELOAD, kindly use LD_PRELOAD_64 as given below :
LD_PRELOAD_64=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
(This makes HOST AND RUN_REPORT_OBJECT work fine).
4) Save the file and execute your forms. The Host() built-in will work as expected
The LD_PRELOAD setting in default.env is only required for the working of signal chaining facility in JVM version 1.5 and later. If you are not using theSignal chaining facility, this variable is not required. For more information, refer to the following documentation
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14772/forms.htm#CJAJGAFF

Screen saver no longer working after Lion upgrade.

Hi,
After standard upgrade about 2 weeks ago (mid July 2012) the screen saver no longer works. I mean I can certainly access the application and the desktop can be made to cycle through different photos etc. But when I configure the screen saver it just refuses to go into screen saver mode at all.
I'm not seeing too much occurance of this through the postings which is a bit worrisome as I'd thought this would be a much wider issue.
Cheers,
Herbie

Please follow these instructions:
Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
https://discussions.apple.com/thread/3258472

ITunes no longer working after Song Upgrade.

I got onto iTunes store, was offered to upgrade 32 of my songs, I said "Yes". After the upgrading completed, iTunes main window pane no longer worked for anything but the iTunes store. It will play my music if I manually select it from the disk (via Finder) but does not seem to be able to display any of my playlists or my music library.
I am running Safari 3.0 (as an FYI).
Mac OS X 10.4.9 (on an intel mini).

Unfortunately uninstalling and reinstalling, or repairing the current copy of iTunes alone doesn't fix the problem....
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Printing No Longer Working After Recent Upgrade

My printing suddenly stopped working after the latest upgrade (which upgraded the kernel from 2.6.15.2 to 2.6.15.4).
I discovered that arch is no longer auto-loading the parport_pc module. This is strange. If I run "hwdetect --show-modules", parport_pc is shown.
I do have MOD_AUTOLOAD="yes" in my rc.conf file.
The quick fix is to add "parport_pc" to the list of MODULES in rc.conf.
Are others having this problem?
Rob

I just read your post. I am sorry I could not join irc. I was actually at work. It is very hard for me to use irc at work. Firewalls make life difficult!
In any event, I think I solved the problem.
Please see http://bbs.archlinux.org/viewtopic.php?t=18747
Here is the complete post:
In my /etc/modprobe.conf file, there was the folloiwng line:
# Load lp support with parport_pc
install parport_pc modprobe -i parport_pc ; modprobe lp ; true
I believe that this line was in the original /etc/modprobe.conf file that came with arch 0.7. I don't remember ever adding it.
I commented out this line and I removed "parport_pc" from the list of MODULES to be loaded in /etc/rc.conf.
I rebooted and it worked. The modules lp, parport and parport_pc were all autoloaded at boot-up.
I should also note that right after the arch upgrade, I was experiencing CUPS daemon failure once and awhile at boot up. Somtimes cupsd loaded and sometimes it failed at boot up. Now it seems that cupsd loads reliably at every bootup. Problem solved!
The following are the remaining lines in my /etc/modprobe.conf:
# Load ppp-generic with modem drivers
install Intel536 modprobe -i Intel536 ; modprobe ppp-generic ; true
install Intel537 modprobe -i Intel537 ; modprobe ppp-generic ; true
install ltmodem modprobe -i ltmodem ; modprobe ppp-generic ; true
install ltserial modprobe -i ltserial ; modprobe ppp-generic ; true
install slamr modprobe -i slamr ; modprobe ppp-generic ; true
install slusb modprobe -i slusb ; modprobe ppp-generic ; true
# OSS Compatibility
#install snd-pcm modprobe -i snd-pcm ; modprobe snd-pcm-oss ; true
#install snd-seq modprobe -i snd-seq ; modprobe snd-seq-oss ; true
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.10 ---
alias snd-card-0 snd-opl3sa2
alias sound-slot-0 snd-opl3sa2
options snd-opl3sa2 fm_port=-1 midi_port=-1 port=0x538 wss_port=0x530
options isapnp=0 dma1=1 dma2=0 irq=5
# --- END: Generated by ALSACONF, do not edit. ---
The modem driver lines came with the original /etc/modprobe.conf file in arch 0.7.
Should I also comment them all out?
Perhaps I should only have the lines for my old ISA sound card in the /etc/modprobe.conf file. Please let me know.
Has there been a change in the kernel or udev which makes it neccesary to make all these changes in the /etc/modprobe.conf file?
Rob

Flashcards for screen brightness no longer work after BIOS upgrade

I have a Toshiba Satellite T135D/1320S laptop, and last night I upgraded the BIOS to v1.90 under the recently released recall notice. AFter installing the BIOS, however, the Flashcard brightness controls no longer work. Whenever I press FN-6 or FN-7, the screen brightness Flashcard pops up and the toggle on the slider bar moves back and forth, but the brightness of the screen does not change.
I have disabled and re-enabled the Flashcards as suggested in a separate forum, and I've also downloaded the most recent display driver (AMD display driver v8.615). Neither effort corrected the problem.
Anyone have any other suggestions?

Satellite T135D-S1320
Sometimes it helps to reset the machine. With the battery and AC adapter removed, close the Power switch for half-a-minute. Re-attach those, press the Power button to turn the computer on, and then immediately press the F2 key while the Toshiba logo is displayed. Press F9 to restore the BIOS default settings, press F10, and then select Yes (Exit Saving Changes). The computer will restart.
Another things to try is reinstalling the TVAP.
Toshiba Value Added Package for Windows 7 (64)
-Jerry

Scrapbook and Snapshots screensavers no longer work after Yosemite upgrade

Similar Messages

Maybe you are looking for