Scrapping from Quality Inspection Area

I am trying to scrap the material from the Quality Inspection area. If i am trying to use 553/551 its not working its asking me to do the process through QM only.
So i tried to reject the lot in QA12, but unfortunately i am not getting the tab "Inspection Lot Stock" tab to post the material to the scrap. Please guid

Dear
check out your original thread/question and this one both are completely different & confusing !!
I am trying to scrap the material from the Quality Inspection area. If i am trying to use 553/551 its not working its asking me to do the process through QM only.
So i tried to reject the lot in QA12, but unfortunately i am not getting the tab "Inspection Lot Stock" tab to post the material to the scrap. Please guid
Now come back to your new question
Stock for the material was transferred to Quality Inspection area.
Now usage decision for inspection lot with origin 08 is Rejected.
How you have transfered the material to quality.which T code & mvt type you used ?
As i understand 323 should not create 08 inspection type lot !!

Similar Messages

EWM Scrapping after quality inspection

Hi guys,
I'm trying to work out a scenario in EWM but I'm not sure how the standard process should work, hopefully you can help.
I'm receiving a returns shipment in my warehouse. After Goods Receipt, I transfer the goods to my quality inspection area using POSC. Here, I enter the inspection result via /SCWM/QINSP. Depending on the inspection result, the follow-up task is determined.
The current behaviour is as described below:
1. If the product is OK, it can be putawayed via the already exising warehouse task.
2. If the result is not OK, the product needs to be scrapped. Currently, EWM creates a Warehouse Task to my putaway storage type, and assigns stock type S5 (Scrapping from Putaway) to the product. When I confirm this Warehouse Task, the stock is moved to the putaway area and the stock type is changed to S6 (Scrapping from Warehouse).
Is this correct behaviour? I would actually expect that the scrapped stock would be moved to the scrapping area (storage type 8040), and not to the putaway area...
Thanks & regards,
Oliver

Hi Juergen,
The Warehouse Process Type for decision "not ok" (Follow-up action D - Scrapping) is 4020 (Scrap).
The Destination storage type / bin for this whse process type are 8040 / SCRAP-ZONE.
As far as I can see, this is correct, right?
Appreciate your help.
Regards,
Oliver

Problem in BAPI for stock posting from quality inspection to unrestricted usage

Hi all,
I am using BAPI_GOODSMVT_CREATE for stock posting from quality inspection to unrestricted usage Stock against quality inspection lot(not by MB1B) using mvt type 321.The material doc gets created by the BAPI,but actual stock posting is not taking place ie.the stock doesn’t get reflected in QA33/32 and QA11 also .Can any one suggest what must be wrong?The inputs given are as follows:
GOODSMVT_HEADER:
PSTNG_DATE =30/07/2014, DOC_DATE = 30/07/2014, REF_DOC_NO = INSP LOT NO.
GOODSMVT_CODE:
GM_CODE: ‘04’ .
GOODSMVT_ITEM:
MATERIAL = MATERIAL NO
PLANT = PLANTCODE
STGE_LOC = ‘WIP’
BATCH = BATCHNO
MOVE_TYPE = ‘321’
ENTRY_QNT = 100
ENTRY_UOM = ‘EA’
ORDERID = Prd ord no.
After executing this I used BAPI_TRANSACTION_COMMIT also. I am able to see the posted qty in MMBE,but it is not reflecting in QA11/33/32.
Kindly help me.

Hi Naveen,
Thanks for the reply. Even after using FM QAVE_PROCESS_AUTO_UD,when i execute
BAPI_GOODSMVT_CREATE, the same thing is happening.I am unable to see the stock deducted in QA33.
Is there any input in the goods mvt bapi where we can provide inspection lot no since i believe that the goods mvt has to get connected with the inspection lot.

MM: Goods issue for scrapping from quality

Hi Experts,
I want to scrap a stock from Quality Inspection using transaction - MB1A and Movement type - 553. When I do the transaction it gives me following error:
<b>Change the inspection stock of material 83565 in QM only</b>
Message no. QA495
Diagnosis
You want to make a stock posting to/from the inspection stock. This is not allowed for material 83565 because the quality inspection control has been activated by QM.
The following cases can occur:
The inspection stock should be increased, although an inspection is not foreseen for the current goods movement
The inspection stock should be released, although you can only do this using the QM transactions.
System response
You cannot carry out the stock posting.
Procedure
Check both the QM inspection setup data and the movement type for material 83565 in the quality management view of the material master.
Can anyone help me out here ?
Thanks
Shiv

Hi,
In transaction QA11, you can take the usage decision & then in inspection lot posting tab, you may post the QI stock to required option (unrestricted, blocked, scrap) as per your requirement.
This is because, the QI stock linked to a particular QI Lot can not be posted from MB1B / MB1A transaction. This has to be done through QM only.
If you have already taken usage decision, then you can select the stocks with usage decision & then make required stock posting.
Hope this helps.
Regards,
Prashant Kolhatkar
- Reward points if answer is helpful.

Batch from quality inspection to unrestricted use.

Hi everybody
Someone can help me with the following problem?
I made a good receipt for order with a movement type 101. We are using the QM module, then with the movement type 101 an inspection lot is generated, consequently the amount entered is place in quality inspection. For any reason the inspection lot was not generated or this was canceled. My problem is that, now the amount entered is in quality inspection and there is not a lot inspection to move the amount from quality inspection to unrestricted use.
I tried use a movement type 102 (transaction MB31) but the system send the message that the movement must be done only with QM transaction. The same message was sent when I tried to cancel the material document (MBST).
Someone know how I can create an inspection lot or how I can move the amount from quality inspection to unrestricted use?
Thanks in advance.

hi carlos
if you create an inspection lot manually you cannot able to post the stock ( since a manual inpsection lot is not stock relevant) better thing is try to figure out why inspection lot is not genereated and solve it
i think if the inspection lot is not generated it will show some message during MIGO itself.try to find the inspection lot using QA32 and specify the material and select Select all inspection lot
regards
thyagarajan

GI to scrap from quality stock can't be cleared from SType 999 in WM

Hi All,
My process goes like this. Creation of return sales order followed by a returns delivery.
I have to use QM along with WM for this process.
The returned stocks are going for Quality Inspection. If it is good it goes to unrestricted stock. If it doesn't pass the quality it is scrapped.
Unrestricted posting works fine but I'm getting problem in Scrapping part.
I have posted 'GI for scrap' from the quality stock through Usage decision in QM.
I can see the movement type 553 in IM and 551 in WM being used but the posting seems to hung in 'LS26' Tcode
It shows something like this
Plant     Sloc           stock category   Storage type            Available stock
3000     0089               Q                       904 (Returns)             1
3000      0089              Q                        999(Differences)        1-
Now the stocks in 904 and 999 should become zero.
I tried LI21 Tcode but it ends with error saying " Change the inspection stock of material XXXX in QM only"
Please help.
Thanks,
Murali

Hi
It would appear that then scrapping has already been done and that is why you have the negative in 999
You now need to get then positive from 904 into the negative in 999 to balance the stock
Have you got a Posting Change Notice that needs to be actioned
You will find this in LU04. Also selet partially procesed so that you see all of the PCN's that have not been done
Create a TO for this PCN and the TO will clear the issue
I hope that this helps
Frenchy

Remove stock from Quality Inspection

Dear All,
In material master by mistak quality inspection flag was active in packing material with 01 inspection type.
When we received material it goes for quality inspection after MIGO. So in MMBE it shows in Quality Inspection.
Now the Plant in which MIGO was prepared has no quality related data maintained.
We tried to reverese MIGO document but system not allowing to do as srock is in Quality inspection.
Is there any way to reverse the MIGO or moving stock from quality to unrestricted?
Thanks in advance,
Nirav

Did you identify the original material document and then try MBST transaction to cancel the document?
When you use the term "reverse" it sound like you are trying to do a 102 against the 101. You can't reverse the transaction, you have to use MBST to cancel the transaction.
Otherwise you have to set up enough QM data to process the lot.
FF

How to Clear Stock From Quality Inspection

Dear Sir,
We have following problem scenario :
In the Quality View the wrong type of Inspection Type was given and subsequently during MIGO as the "Quality Inspection" option was selected under Stock Type , so after MIGO stock got posted under Quality Inspection and no Inspection Lot was created .
Now we want to clear the Stock from QI to either Un-restricted or any other type , so that material can be cleared and brought to Un-restricted Stock ultimately .
We tried to use MB1b with movement type 321 , but it given error as "Change the inspection stock of material CJMC1A0477 in QM only" .
I request you to kindly guide me as how can the Stock be cleared from QI .
With Thanks and Regards
B Mittal

Hi ALL,
I'm also facing the same issue. In material master QM view : Q M Procurement activity deactivated and Inspection setup also deactivated. This is not a proper way to solve the issue anyway i have deactivated, but still i am facing same issue.
Please anybody can help on this...
Regards
Chandru.

Transfer posting stocks from quality inspection to unrestricted, problem

Hello Guys,
kindly help me i am having problems doing transfer posting (mb1b) using movement type 321. because in my stock overview (mmbe) thera are stocks in Quality Inspection, i want that to be trasfered in Unrestricted Stock. that's why i execute transfer posting but there is an error occured doing it so. the error is "change the inspection stock of material 1078 in QM only". how could i make this stocks transfer to unrestricted?
please advise me the correct way to settled this.
thanks and regards,

Hello Guys,
I am very thankful for all of you contributing to this thread of mine hope in some other time you can work it out with me again I already done all this resolutions you have mention and I also know that is all the right wya to solve this issue but i dont see my problem exists on the configuration in material tpye allocation because in our business sample the FERTin standard SAP but with us it is customized name, have different code it was not define in TLtype in material allocation for quality inspection (Q), now i know what to do to call our admin to authorized my config there.
Thank you so much i will closed this thread now please help me in some of other query next time. hehehehe..
Regards,

Transfer material from quality inspection

Hi PP and QM Guru,i have confusion in QM..when i use Qa32 for UD..after GR from production..the quantity is 40 pc in inspection...after inspection i sent only 10 pc in unrestricted wit QA32 rest 30 pc in quality inspection.
..but when i want to send rest 30 pc with pervious lot..it does not allow to do me...again i try to do manual lot generation..it also does not allow...
now my material 30 pc is inspection....how i will send this martial to un restricted
kindly suggest me
regards
Akil

Hi,
First goto the tcode ; MD04 and check whther the balance qty is showing in QI, if so take the Lot number and goto Tcode : QVM2 / QA12 and post .
Try using the QVM2 transaction code and post the balance qty which is showing under Inspection.
Hope this will help you.
regards
radhak mk

Stock posting from quality inspection to Unrestricted

Hi ,
User has approved the 1980 qty out of 2160 qty for a inspection lot in the transaction QA11 , now the 180 qty remains in quality inspection . plesase advise how can we move the 180 qty from QI to unrestricted stock.
Regards,
Amara

Hi,
Does the inspection lot has been created for the entire qty and only 1980 qty has been moved to unrestricted by QA decission?
If the lot still exists for remaining qty, do the same thing for the remaining qty and if not with a new lot.
Regards,

Quality inspection stock for scrapping

Hello SAP expert,
In MMBE there are 2800 PC in the Quality inspection SLoc 1005.We want to scrap those 2800 PC. We want to do this with MB1A, movement type 551 or 554. With movement type 551, the quantity must be transferred to unrestricted. For movement type 554, we can scrap directly from SLoc 1005.
When trying to do this, the error "Change the inspection lot stock of material 10009021in QM only" is shown. The person of the Quality department checked the inspection lots and canu2019t find something. So we donu2019t know where to look for this anymore.
Can you please help?
Thanks
Ryan

Hello,
I have noticed that they use MB1A, and with movement 551 (withdrawal for scrapping) and they said the stock will be transfer to UNRESTRICTED, then they do 554 movement (withdrawal for scrapping from quality inspection - reversal) which i think is a wrong process?
they can use movement 553 (withdrawal for scrapping from quality inspection) am i correct? to achieve they desired. and plus where can i find when i achieve to scrap the QI stock? where i can may the proof that the QI stock was scrap? in what tcode can i find this scrap number of material i done?
Thanks
Ryan

From Quality Stock to free stock

Where i can change the kind of stock for a material. I mean, i have 10 units of Material A in quality stock and i want to use this stock in a 201. How can i change it?
Regards

Dear Jorge,
There are following 2 ways to resolve your problem:
1.If 10 units of material were procured and Stock were posted to Quality stock.One Inspection Lot would have generated.Now,You need to first find out inspection Lot and record the results and finally record Usage decision.Steps are as follows-->
a) Search Inspection Lot using T code -QA33 by selecting relevant parameters e.g plant,material,date etc.
b) Record result using T code -QE51N by selecting tab Inspection Lot number and enter the desired Inspecction lot number(searched in first step)
c) Record usage decision using T code-QA11.Allocate Usage decision code from drop down list e.g "Approved" in case of free stock.You may not find "approved" UD as it might be given different name but idea is that you have select the UD code which make the stock free for use.
2.You can post transfer posting using Tcode -MB1B and 321 movement type.
This is how stock could be transferred from Quality Inspection stock to un-restricted stock(free use).
hope it helps..
Regards,
Vineet

QM- Material in quality inspection

Hi Gurús,
Hi Gurús,
We have some materials in quality inspection. For each material exist an inspection lot but not an inspection plan.
I would like to know if there is a way to move the material from quality inspection to unrestricted use, but without creating an inspection plan and recording a use decision
Regards
Enzo

Hi,
There are 2 possibilities -
1) If you have activated QM at material master & due to this the material is placed in the inspection lot, then you can transfer the same in QM only.
2) If you have not activated QM for material, but selected Inspection Lot stock at PO, then you can transfer the material in MB1B by movement 321
Regards,
Prashant

OMJJ - Where I diferentiate "Stock quality inspection" - "Stock unrestricted use"?

Good morning, experts!
I need to know how to set up a move for the input material in quality stock, without having to use the QM or configure the material. We have the standard movement 503 that is received at the stock in quality inspection and the movement 501 that the entry into stock unrestricted use. In what field of transaction OMJJ I make this differentiation?
I appreciate your help.

Hi,
If one you use 501 the stock is sent to Quality inspection, then this could happen because you have checked the Post to Insp. stock indicator in the material master (Purchasinf view).
Post to Inspection Stock
Specifies whether the material is subject to quality inspection (without inspection lot processing) and whether a goods receipt is posted to inspection stock. The indicator is copied to purchase order items and goods receipt items as a default value.
Dependencies
You can select this indicator, if no stock-relevant inspection type has been selected in the inspection setup, and therefore no stock-relevant inspection lots can be created.
If you activate a stock-relevant inspection type, the entry in this field is deselected and can no longer be maintained. In this case, a corresponding indicator in the inspection type controls whether goods are posted to inspection stock.
When you use 501 the stock should be posted as unrestricted stock, then you can move the stock from Unrestrected to Quality Inspection stock using movement type 322 (use t-code MB1B).
With movement type 321 you can move from Quality Inspection stock to Unrestricted.
Kind Regards,
Mariano

Scrapping from Quality Inspection Area

Similar Messages

Maybe you are looking for