Scrapping through QM module vs Inspection Stock
Hi all,
I've got the following situation and wondered why it would behave differently.
When doing a production backflush with a material set up for Quality Management, an inspection lot is created when the backflush is posted. Now when I do the UD on the inspection lot, and want to scrap some of the goods, I get an error stating that the order cannot carry revenues (error KO 14:Order 701804 cannot carry revenues.). I also tried specifying a cost center and this did not work as well - same error.
This is fine, because this order is a normal cost collector and must not carry revenues.
Now, when I take the same material, change the QM view on the master (deactivate the QM module) so that the stock goes to normal inspection stock and do a backflush (using the same cost collector) my stock will go to IM quality stocks without an inspection lot. This is correct.
Should I now want to scrap some or all of this inspection stock (with migo movement 553), I DO NOT get the error message as mentioned above (and I used the same cost center as above).
Nothing else changed - only now I'm not taking my stock through QM.
Why can I do scrapping from inpsection stock through migo, but cannot do scrapping from the QM module? The movement type is the same & the cost center is the same.
Kind regards,
Hein
Hello Atul,
You can display Inspection Lot from Maintenance Order (IW32/33) by clicking on Environment --> Display Insp Lot. System will take you to Inspection Lot in display mode.
But if you're saying system is NOT displaying any insp lot that means an inspection lot is NOT created for that order.
Check SPRO if you've assigned Inspection Type-14 to correct Plant & Maintenance Order Type.
Path: SPRO --> QM --> Quality Inspection --> Insp Lot Creation --> Define Insp for PM.
Revert if any further issue.
Regards,
Anup
Similar Messages
-
Change stock from unresticted stock to quality inspection stock
Hi,
I have a material with Qualtiy View.we have done G.R. & also made UD & now my material lying in unresticted Stock.but now i want to cancle the G.R..
What is the procedure to change stock from unresticted stock to quality inspection stock through quality module.
Regards
PavanHi
user Exit QEVA0008 in SMOD you can check the documentation.
Module for Editing Customer Function Code
This user exit allows you to activate a function key in the menu for the
usage decision.
You can freely define the description and function associated with this
function key (+FC1).
You can use this feature, for example, to revoke (reset) the usage
decision.
Refer to the documentation for function module EXIT_SAPMQEVA_008.
Functionality
This function module is called if the freely defined function (+FC1) in the menu for the usage decision transactions is called up. A prerequisite for this is the activation of the user exit QEVA0008.
Example
Using this function module, you can reset the usage decision in transactions QA12 ("Change usage decision with history") and QA14 ("Change usage decision without history").
Include LXQEVF10 contains sample coding for resetting the usage decision.
Notes
Business transaction QM68 is available for this function in the standard system. You can display a where-used list for this transaction in transaction BS33 (Display transactions).
If business transaction QM68 was carried out successfully, the system sets the inspection lot status "UDRE" - usage decision reset (system status I0297). You can display a where-used list for this status in transaction BS23 (Display system statuses).
If you want to use the function to reset the usage decision, be sure to consider the following points:
If a vendor is released (status profile in the quality info record), an update is carried out only once; this means that if the usage decision is reset, the status in the supply relationship is not corrected.
If you make the usage decision again, the inspection results will also be transferred to the batch classification.
The quality level is updated only once (when you make the initial usage decision). If the usage decision is changed, the quality level is not updated.
Regards
Sujit -
Inspected stock posting to multiple storage location without batch
Hi,
At the time of Usage Decision, I want to post the inspected stock to multiple storage location i.e., Rejected Stock to Scrap Storage Location, Qualified Stock to Unrestricted Use Storage Location.
Quick response will be appreciated.
Anandkumar KSThe scrap line has no storage location since that stock is typically written off and scrap cost center is defined in configuration.
A possible alternative is to set up VMENGE08 and VMENGE09 with the same material movements you want to use. You obviously aren't using the 553 movement type as that writes off the material. That could give you two lines to use for your scraping. I can't remember if these stock posting lines give you the storage location option or not and I don't have a sandbox available to test today. If you need to post more then two grades in one inspection lot, you'll have to do the first two postings, save the UD, then come back in and do a second posting for the next two grades.
Read the configuration help file you'll find in confg for "Define Inventory Postings" under the QM config.
You can also change the displayed names of the stock posting lines. That's explained in the config file as well.
Craig -
Hi experts ,
Whenever a material is procured from a particular vendor then at the time of posting goods receipt that material by default to be posted in Quality inspection stock alone not in Unrestricted use stock,i.e. posting in unrestricted use stock should not be allowed at all . If the vendor going to differ means then it can be posted in Unrestricted us stock .
Kindly help me how to do this.
- NeoHello Neo,
There are two options in this case,
1. If using QM module, then as suggested by Srinivas, you need to maintain QM info record for the vendor which are subject to Quality material.
2. If you are no using QM module then you need to flag mark "Post to Inspection Stock" check box in purchasing view of material master. But in this case, the material will be posted as QI stock for all the vendor, however you can change it during PO and GR.
Hope this helps.
Regards
Arif Mansuri -
Return posting to quality inspection stock
Hi QM Gurus!
How can i post from unrestricted to quality insp stock? I am trying to use movement type 322(quality insp to unrestricted-reversal) and an error message says "Change the inspection stock of material 1101 in QM only".
When i activated the inspection type 08 (stock transfer inspection), the movement type 322 works. However, when i do transfer posting from one storage location to another, an inspection lot is created.
So my problem is, how do i allow posting from unrestricted to quality insp stock and no inspection lots are created when i transfer the material from one storage location to another???
I would appreciate if anyone could help me.
Regards,
Heinrick Paladhi heinrick
you can reverse the stock positing providing following prerequisite have been meet,
A usage decision has been made for the inspection lot.
The goods in the inspection lot have been posted from inspection stock to blocked stock or unrestricted-use stock.
If you posted the goods to a stock other than blocked stock or unrestricted-use stock (for example, to scrap), you must first post the stock back to blocked stock before you can reverse the original stock posting.
Reversing Stock Postings
Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
The initial screen for creating a goods receipt for a purchase order appears.
In the field for the movement type, enter 102 (goods receipt for a purchase order into warehouse - reversal).
In the field for the purchase order, enter the purchase order number for the original goods receipt.
You can copy the purchase order number from the inspection lot.
Choose Enter to display the selection screen for the purchase order items.
Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
Save the goods receipt and exit the Materials Management component.
Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
The initial screen for changing a usage decision appears.
Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen.
regards
thyagarajan -
Printing ALV Report output through Function Modules
Hi All,
I want to print my ALV Grid output through function modules/statement (not through print option in menu).
This is because, i am generating a PDF from spool when user clicks on a button. If any changes happened in the ALV output layout, they will be captured in spool through printing it.
So can you please tell me how to print the ALV Output through FMs or sending the ALV output to spool.
Thanks & Regards,
Senthil.
Edited by: senthil nathan on May 17, 2010 2:49 PMHi Dev,
Thanks for the reply.
I want to print the ALV when the user clicks on a button in toolbar. Lets say the user has made some changes to the layout, (E.g hiding a field) and when i print that output it should use the changed layout, If i use the FM suggested by you, i cant acheive this.
If you try to print this manually, the system uses the changed layout and not the original. Thats why i want to know FMs/statement to print.
Regards,
Senthil. -
Change the inspection stock of material in qm only
Hi All,
Error I am getting while doing a Goods Movement is "change the inspection stock of material in qm only". Let me explain you what exactly happend.
We moved transports, some how moved transports deleted the existing Inspection types in Production system. So there were no inspection types available in the system untill we send another transport. During the period of the transport in transit Goods reciept agains the Purchase order is done. So inspection lots were not generated. So now inspection types exist due to another transport.
So Users complained about the inspectiion lots.
I told them to reverse the Goods reciept documents and do the Goods recipt again so that inspection lots get generated.
When they are trying to do 102 Mvt Type they are getting the error.
I was even trying to use 321 Mvt Type, still Unsussesful.
I tried de-activating the Inspection typem but system throwing an error "Quality stock exist".
Is there a way to Move stock from Quality to Unrestricted?
How to generate an Inspection lot for the existing stock to move the stock from quality to unrestricted?
QA01 inspection lot creation, i dont see the purchase order field. Is there any possibility of adding purchase order to the inspection lot?
Thanks,
Quantum.hi ,
How to generate an Inspection lot for the existing stock to move the stock from quality to unrestricted?
activate 0800 inspection type in material master, its basically for stock which is in qulity and does not have a inspection lot.
regards
satish -
Save EAN11 field while creating POrder creation through Function module
Hi All,
I want to update EAN11 field in material master while creating Purchase Order through function module. I am using function module BAPI_PO_CREATE1 for creating purchase order. There are no structures in the PO creation FM in which EAN11 field is there. I have also tried using function module MEPO_DOC_ITEM_PROCESS for updating EAN11 field. It is not working. Please suggest some method to do that.
Note: I am receiving EAN11 through an external system by proxy.
Thanks,
ChinmayHi,
Use BAPI_MATERIAL_SAVEDATA to updat ean numbers for materials.
tables INTERNATIONALARTNOS is used to update EAN.
Regards,
Shanmugavel Chandrasekaran -
SD delivery goods issue of Quality inspection stock
Hello, anyone know whether SAP allow goods issue of quality inspection stock?
If stanrdard customizing not possible, any user exit ?Hi
No sap not allows GI for QI stock
Beacuse Once Stock in QI without inspection we can't issue goods
Hope ths helps
Please reward points
Sunil -
Delivery is accepting material in Blocked & quality inspection stock
Hi Experts,
During delivery ( VL01N) the system asks for Serial Nos for the delivered Material and serial Nos are assigned by going to Extras--> serial Nos. and PGI is completed
In this process the system could able to take the serial Nos that are in Blocked (07)or Quality (02) state also apart from the Unrestricted Use.
How can we restrict the system to prevent selecting the stock/material apart apart from 01 state ( i.e unrestricted use)
Regds
RajivYou have customize that availability check which runs behind delivery to check what are the stock available.
You have to make sure u unchecked the quality inspection stock and blocked stock
thanks -
Unrestrected use stock to quality inspection stock
Hi,
plz tell me how can transfer Unrestrected use stock to quality inspection stock for same material and same palntHi Prasad, Make sure that inspection type 08 is assigned and activated in Material Master's QM view. Then you would be able to move the stock from unrestricted to quality using MB1B (Mvt/Type 322).
Also check : Stock Reversal - From Unrestricted to Quality
Edited by: m_n_novice on Sep 5, 2009 2:02 PM -
Sto stock to Quality Inspection stock
Hi,
I want Sto stock to Quality Inspection stock.Then i want Quality Inspection stock to production purpes
I want return stock to Quality Inspection stock.then Quality Inspection stock to normal stockHI,
For the material to go into quality stk,in the puchasing view of material master for the receiving plant tick the post to inspection stk & save.
Then do the STO the material will come automatically into quality stk.
Even if u dont tick in material master still u can receive the matl in QI stk when doing migo by selcting the QI stk.
After receiving the matl u can move it by using tcode MB1B & mvmt type321 to Unrestricted use.
IN SAP only the unrestricted can be issued to production.
Edited by: Murugan mgl on Aug 13, 2009 8:15 AM
Edited by: Murugan mgl on Aug 13, 2009 8:16 AM -
Stock provided to vendor Quality inspection Stock
Hi
can any expert please Explain what is use of subcontractor inspection stock ,how the movement takes place between Stock provided to vendor unrestricted use & Stock provided to vendor Quality inspection if Iwanted to move between this two location how can i activate the QM ?Hi,
I think you can not move the inspection stock in your plant to inspection stock provided to vendor.
Regards,
Prashant -
Quality inspection stock payment block
Hi All,
I want to block the payment for the materials which comes to quality inspection stock in MIGO as I have maintained in Material Master purchasing view post to quality inspection tick.
I want payment to the vendor only after the stock goes from quality to unrestricted use .Is there any way achieving it ?
Regards
Abhijit DasDear,
Please try this in transaction OQB1 and Change the QM control key used in the QM view for the material.
Or use SPRO > Quality Management > QM in Logistics > QM in procurement > Define Control key path.
In the details of the key, set the Invoice Block indicator as well as whether it should be a warning message or an error message.
Regards,
Syed Hussain. -
OMJJ - Where I diferentiate "Stock quality inspection" - "Stock unrestricted use"?
Good morning, experts!
I need to know how to set up a move for the input material in quality stock, without having to use the QM or configure the material. We have the standard movement 503 that is received at the stock in quality inspection and the movement 501 that the entry into stock unrestricted use. In what field of transaction OMJJ I make this differentiation?
I appreciate your help.Hi,
If one you use 501 the stock is sent to Quality inspection, then this could happen because you have checked the Post to Insp. stock indicator in the material master (Purchasinf view).
Post to Inspection Stock
Specifies whether the material is subject to quality inspection (without inspection lot processing) and whether a goods receipt is posted to inspection stock. The indicator is copied to purchase order items and goods receipt items as a default value.
Dependencies
You can select this indicator, if no stock-relevant inspection type has been selected in the inspection setup, and therefore no stock-relevant inspection lots can be created.
If you activate a stock-relevant inspection type, the entry in this field is deselected and can no longer be maintained. In this case, a corresponding indicator in the inspection type controls whether goods are posted to inspection stock.
When you use 501 the stock should be posted as unrestricted stock, then you can move the stock from Unrestrected to Quality Inspection stock using movement type 322 (use t-code MB1B).
With movement type 321 you can move from Quality Inspection stock to Unrestricted.
Kind Regards,
Mariano
Maybe you are looking for
-
Lightroom 2.0: Save Metadata to File is not working correctly!
Hi, I have this JPG file with no EXIF data whatsoever but I know it's capture time so I went to "Metadata » Edit Capture Time" and changed the capture time. On Lightroom in the Library module, I can see the capture time but then I save the metadata w
-
Hi, I need to know where are the caluculated values for freight FRC1 is getting stored in the purchase order conditions.
-
I currently have software version 3.1.2 every time I log on with my iphone 3gs, I am unable to update to latest version. It takes and age , sometimes 2 hrs and then cuts out saying ' time has run out' or something to that effect. I use windows XP.
-
Workflow on Multi-Select Picklist
Afternoon, I am trying to create and display values on a Multi-Select Picklist through workflow on an email notification upon a SR being created and saved. Basically i am trying to create an email notification to be generated when a service request i
-
HT201317 duplicate photos with photo stream
Does anybody get duplicate photos with photo stream? If so, how do you stop this happening?