Scratch disk full and cannot open photoshop to fix it...

I cannot open photoshop because it says the scratch disk is full. I have been using photoshop (cs5) for 10 years and never had this problem. I recently installed cs5 on my Windows 7 computer and it worked for a few weeks, then this problem arose. I cannot afford a new version at this time but would like to use cs5 on this computer and I know it can work because it did for several weeks but now it won't and I can't follow the typical steps to remedy this situation because I cannot open photoshop. Please help!

Hi there,
The tips outlined below came from this site.
First, if you can open Photoshop, check to see what hard drive is set up as your Photoshop scratch disk. To do this, go to Photoshop > Preferences > Performance. Then look under Scratch Disks to see which one you are using and how much free space it has. (FYI—I've included these steps for future visitors to this thread.)
Option 1: Delete some files
If your scratch disk is very full (or the free space is low), try deleting some unwanted files from the drive (for me, "Macintosh HD" as seen in the image above) to make room for new ones.
Option 2: Delete temp files
Search your computer for temporary files. These files are typically named ~PST####.tmp on Windows and Temp#### on Macintosh, where #### is a series of numbers. These are safe to delete.
Option 3: Defragment your Hard Disk
Instructions for Windows
Instructions for Mac
I hope one of these methods works for you!

Similar Messages

  • What does scratch disk full mean? My photoshop elements 2 won't initialize.

    What does scratch disk full mean???

    If your scratch disk were really full, it would mean that there's not enough space left on your hard drive for PSE to do its calculations. But usually that error message means your hard drive is too big. PSE 2 can't see a 1 GB drive, for instance. It wants 750MB or less. If you use windows you can possibly get around it by partitioning your hard drive, if you think it's worth it. There's no way to make PSE 2 run on a current mac.

  • I am getting a Photoshop CC "scratch disk full" error, but my scratch disk is C:/ and I have 40 gigs of free space - help!?!

    Why is Photoshop giving me this error when I'm not working on files that are that big given the amount of free space on my computer? They're around 1.5 megs each, .jpeg files (not even PSD files) and I'm only trying to resize them to smaller, nothing fancy at all. Can't even open and do one without getting the scratch disk full error - but it's not full when I look at my C:/ drive (even in PS when I check the scratch disks under Preferences you can see the multiple gigs free).
    Help anyone?
    Thanks!
    C

    The rule of thumb I follow to figure out scratch space says to figure on 50 to 100 times the size of your largest file ever multiplied by the number of files you have open.  I have seen the scratch file exceed 800 GB once, an admittedly rare occurrence, but it often exceeds 200 GB when stitching large panoramas and the like.
    As an example—and stressing that I'm aware that others have even more scratch space than I do—I keep two dedicated, physically separate hard drives as my primary and secondary Photoshop scratch disks and a lot of GB free on my boot drive for the OS.  I also have 16 GB of RAM installed.
    Additionally, if you only have a single HD, i.e. your boot drive, you'd need it to be large enough to accommodate both the swap files of the OS as well as Photoshop's scratch.

  • Hi i cant use photoshop when i try and adjust an image is says Scratch disk full but i have memory a

    Hi i cant use photoshop when i try and adjust an image is says Scratch disk full but i have memory available on my mac

    This forum is actually about the Cloud, not about using individual programs
    Once your program downloads and installs with no errors, you need the program forum
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
    http://forums.adobe.com/community/photoshop

  • I get a message "could not initalize scratch disk full" I hae a new computer with Win 8 and I am installing PS 7

    I get a message "could not initalize scratch disk full" I have a new computer with Win 8 and I am installing PS 7. how can I fix the scratch disk problem? Thank you for the help.

    Are you saying that the Installation failed, or that Photoshop has installed but won't open?
    You say Photoshop PS7.  Is that a typo, or do you really mean the version that was released in 2002 and that preceded Photoshop CS?
    http://en.wikipedia.org/wiki/Adobe_Photoshop_version_history#7.0
    If you do indeed mean PS7, then I am afraid that is not compatible with Windows 8.1
    Windows Compatibility Center

  • PS7 and Scratch Disk Full, using XP SP3 with 1 HD... how to fix?

    I've searched the forum, yet couldn't find an answer or fix...  I installed my old PS7 on my new computer running XP with SP3 on a dualcore Intel, 1.5T HD (only one drive), 3Gb of RAM-- not enough money to upgrade PS, computer took first dibs...  PS7 refuses to open - after booting, comes up with a pop-up error stating the Scratch Disk is full, then shuts down.
    My old system (W-2000, 20Gb single HD, with 1.8 Pentium processor, 1Gb of RAM) worked perfectly with PS7 - never had any problems...
    I've tried all fixes possible...  HD is not even close to fragmented as is a new drive; not enough programs installed yet, or use on machine, for disk clean-up to be necessary; forced creation of the preference file (changed name to .old); and did the ctrl-alt-shift to boot to defaults.  No idea what is going on or why it would say scratch disk full.

    Uaphil wrote:
    Actually, there are no partitions on my drive.  (I didn't realize PS needed a different drive or partition)  My old computer and HD didn't have partitions either, and worked perfectly.
    Could it be an issue with PS7 and the size of the HD?  If so, is there a patch for this?
    The point isn't that Photoshop needs different drives or partitions but that, as you suggest, the old PS 7 has problems with drives much bigger than were imagined in the days it was written.
    However there are advantages in having the the scratch disk on a separate physical drive from the system drive where the paging file normally resides.

  • Elements 2.0 and Windows 7 - Scratch disks full

    I have read the previous post regarding the Scratch Disks full error on starting up Photoshop elements 2.0.  I have started PSE2 holding down the Ctrl/Alt keys and have been given a prompt box where I cna change the scrtach disk locations, but the changes don't "stick".  I continue to get the same error and the scratch disk location does not change.  I started PSE2 holding down the Ctrl/Alt/Shift and got the box where I can delete the setting and have deleted them and still get the same error message.
    Any suggestions?

    Follow the instructions here:  http://windows.microsoft.com/en-US/windows-vista/Change-the-size-of-virtual-memory
    I don't know off hand the recommended settings.  I have about 6MB pagefile size (VM) with a Vista 64 machine that also has 6MB RAM.  Elements 2 is running just fine on this machine.  You may want to go to the same relationship VM vs RAM as I have it.  If that is not enough, try to make the VM 150% of RAM.
    Juergen

  • Photoshop Elements 2.0 Windows 7 Scratch Disks Full

    Hello there,
    I have seen a few posts about PSE2 on Windows 7, but none of them have helped get it working for me. Same deal, I run PSE2 and get the "Scratch disks full" message. I have a 1.5GB hard drive. I have tried everything and no luck on getting it working. Any new ideas would be greatly appreciated!
    Thanks

    Here are some of the things i've had success with in older versions of photoshop (pse 2 or ps 7 and older versions) with hard drives bugger than 1tb.
    The first two always work
    1. Install windows xp mode if your version of windows 7 supports it.
    2. Install an older operating system on vmware or virtualbox.
    3. Run pse 2 as an administrator and press the Alt+Ctrl keys just after starting pse 2, and then set the scratch disk to the recovery partition on your hard drve.
    4. add a second hard drive to use as the scratch disk for pse 2
    5. Partition a part of your existing hard drve to use as the scratch disk for pse 2
    6. Re install windows 7 on partition of 1tb and then partition the rest of the 500mb for storage of files
    Added: You always have the option of buying photoshop elements 10 which has no problems with hard drives bigger than 1b.
    Message was edited by: R_Kelly

  • My ipad is hung what to do?i cannot switch off for 2 weeks because of i cloud it say full and cannot be back up i try to close or open the settings but nothing happen anyone can help me thanks a lot in advance

    my ipad is hung what to do?i cannot switch off for 2 weeks because of i cloud it say full and cannot be back up i try to close or open the settings but nothing happen anyone can help me thanks a lot in advance

    Welcome to Apple Support Communities
    Hold Sleep and Home buttons for 10 seconds until the device restarts

  • I just downloaded the trial version of Photoshop CS6. And cannot open adobe eps files ?

            I have installed Photoshop CS6 and cannot open adobe eps files? any Ideas

    Hi there
    When you say that you can't open eps files, are you getting an error message?
    Photoshop CS6 has the ability to open both .eps and .ai files. However, opening by going to File > Open... will rasterize the image - meaning that it is no long a vector so you can't scale it up and down without losing quality. To open an .eps or .ai file in Photoshop and maintain its vector capabilities, try the following:
    Create a new canvas in Photoshop. Then, go to File > Place...
    After selecting your file from the Place dialog box, your image will be placed into your canvas. Resize accordingly, and then hit Enter on your keyboard.
    The image you just placed is a Smart Object, meaning that it has retained its vector capabilities and can be resized without losing image quality. If you ever need to rasterized this image, just right click on the layer and select Rasterize Layer.
    If you are still having trouble, please post here again so that we can provide additional assistance.
    Cheers!
    Kendall

  • I purchased adobe photoshop elements 12 and cannot open organizer on my macbook pro 7.1  Any suggest

    i purchased adobe photoshop elements 12 and cannot open organizer on my macbook pro 7.1  Any suggestions?

    After I successfully install the adobe photoshop elements 12 for mac, I try to open organizer and a window pops up that says
    "Adobe Elements 12 Organizer cannot be opened because of a problem. Check with the developer to make sure Adobe Elements 12 Organizer works with this version of Mac OSX. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OSX. Click report to see more detailed information and send a report to Apple."
    I have checked for any updates on my Mac and it is up to date.
    I have tried reloading and am still getting the same result.
    I can open Editor, but not Organizer.
    I am running Mac OSX version 10.6.2.4 Ghz Intel Core 2 Duo Processor with 4 GB  memory, all standard stuff that came in the computer and I have no security software running when I do this.
    Any idea why it is not working?
    Thanks, Victor

  • I have bought a new computer and backed up off time machine backup now I cannot open photoshop get error code 150 30 help appreciated.

    I have bought a new computer and backed up off time machine backup now I cannot open photoshop get error code 150 30 help appreciated.?

    Have you updated your iTunes on your computer? WIth a device running iOS7, you need iTunes 11.
    When you removed iTUnes, did you see something named 'apple mobile device support' or something like it? (The exact name varies from operating system to operating system). If you see that, uninstall it too. That's the drivers for your iPhone and they should self-install when you plug your device in.
    If all that is fine, have you checked your cable and USB port? a malfunctioning cable can keep you from syncing.

  • HT1660 iTunes library files full and cannot download movie but plenty of open disc space?

    iTunes library files full and cannot download movie but plenty of open disc space?

    To clarify, currently on the 2TB external drive are music and videos. I want to split them up and hopefully save some space - and maybe foresee problems in the future when I hit max capacity on the 1TB external, and think about a 4GB (not the best option I see at this time) or another 2 2TB drives.
    Doesn't the Library file just save locations when iTunes closes down so everything should be OK? I mean, the prog can recognize everything, it just won't download to anything, even if I move from the external drive an older movie to the new drive, it refuses to "see" the movie so I can download it.

  • HT1349 when I start my macbook it shows STARTUP DISK FULL, and I cannot do anything else, it doesnt let me get into the computer to delete any programs,,,, What should I do ?

    when I start my macbook it shows STARTUP DISK FULL, and I cannot do anything else, it doesnt let me get into the computer to delete any programs,,,, What should I do ?

    Try starting in Safe mode which does not load all the software that is used in a regular boot. It also runs a disk check. After booting in safe mode transfer or trash stuff you don't really need so as to free up disk space. Be sure to hold the shift key down continously till a progress bar shows on the screen.
    http://support.apple.com/kb/ht1564
    http://support.apple.com/kb/ht1455

  • Scratch Disk Full error for PS7 installation in Windows 7

    Can anyone from Adobe tech support tell me how to install my own copy of PS7 on my new Windows 7 computer without having the Scratch Disk Full error show up?  I am comfortable around my computer but am certainly not a tech wizard and it would be helpful if there was a set of specific steps I could take. I've read forums about partitioning but I don't want to make a wrong step and screw everything else up. Also, is this a problem with the more recent Photoshop CS versions?

    Well, I've been able to install my PS-7 on my virtual drive in XP mode somehow (I got the 'disk full' pop-up, but then it seemed to install it anyway- I don't remember if it was the curse I leveled at it or what- and it still seems to run.  I can actually access images from the Windows 7 side C: drive after opening Photoshop and going to 'open/ C:/ My Photos (or whatever)', but images I open in Windows 7 have to be saved on my hard drive before I can access them in Photoshop in XP mode. I'm still not sure where the new images will be stored and if they will be able to be accessed from both XP and Windows 7 mode (my gut says "fat chance"), and I can't have my Windows 7 images open in Photoshop natively.
         I have therefore decided to add to the (probably swelling) coffers of Adobe by buying a shiny, brand new, squeaky-clean, and (hopefully) fully functional copy of Photoshop Elements 10 to install on my Windows 7 side, so now I can avoid having some lame 'viewer' program open my images.  Ain't technology grand?

Maybe you are looking for

  • How do I remove credit card information from iTunes account?

    How do I remove credit card information from iTunes account?

  • Change Page # in PDF

    Apologies if this duplicates other inquiries as this seems an obvious question to me. But "search" is disabled on the site, so not sure how to find it without paging through a million screens. We create MS Word Documents with cover pages and tables o

  • Will I lose my icloud information if I switch accounts?

    Okay so I have been sharing an icloud account with my friend for a couple of years but I have my own account that I use for all my devices except for saving like contacts to the cloud. If I switch and start saving to my account will I lose my contact

  • Exception thrown trying to convert string to int

    Hey Guys, i imported a csv file into my app which i divide using the split() method and put into an array then I divided the array into variables; fruit = piece[0]; price = piece[1]; unit = piece[2];Now since price has to be a double i converted it i

  • Berkeley DB JE no in-memory option ?

    Hi, Is there any way to create the berkley databse in memory ?