Scratch Folder issue in APP-V 5.0

Hi,
My application required two times reboot while seq'g, 1. cafter omplete installation and 2. configuration.
So here i am facing issue after 2nd restart machine while seq'g.
1. i have changed scratch folder "C:\Users\<UserName>\AppData\Local\Temp\1\Scratch" to "C:\Scratch" in seq'r -> Tools-> Options-> Scratch Directory.
2. i have installed application, after i have restarted manually machine.
3. seq'r started/launched as expected at monitor stage.
4. after i have configured my application. like main exe (main.exe -i settings)
5. i have restared machine manually 2nd time, but after restart machine i am getting error like "
The sequencer was unable to prepare for a system restart. ********" PFA
so i clicked ok and when i went saw scratch directory it was set back to "C:\Users\<UserName>\AppData\Local\Temp\1\Scratch"
My observations:
1. after 1st restart i can able see Resume reg key as below.
Key: HKLM\SOFTWARE\Microsoft\AppV\Sequencer\Resume
REZ_SZ: SerializedState = "C:\Scratch\mo2j3sll.il3.Scratch"
could you please help me on this.
Thanks in advance
Reddy

Hi Rorymon,
Thanks.. :)
I have re-installed to diff seq'r machine and by dafult scratch folder set as "C:\Users\<UserName>\AppData\Local\Temp\Scratch".
i have restarted twice machine, seq'r able to resume the status from scratch.
My Observations:
1. If scratch folder set by default "C:\Users\<UserName>\AppData\Local\Temp\Scratch"?
seq'r success/able to resume from scratch folder after multiple machine restart's.
2. if scracth folder set by default "C:\Users\<UserName>\AppData\Local\Temp\1\Scratch"?
seq'r failed to resume from scracth folder! because after restart seq'r machine ""C:\Users\<UserName>\AppData\Local\Temp\1"
folder will delete by default.
Thanks
Ramesh

Similar Messages

Keep getting capture scratch folder in my capture scratch folder

In my system settings I have set capture scratch like this...MEDIA1:capture scratch. Of course MEDIA1 is one of my drives. But why am I getting a capture scratch folder in my capture scratch folder? Shane, I even carefully followed your instructions not to make the mistake of clicking the scratch folder. I just cannot fiqure this out.
Best,
Tom

thought i'd use this post to raise the whole issue of interface elements held over from bygone days ...
why, exactly, is this folder still referred to as a "scratch" folder. isn't the convention that "scratch" files are temporary? seems to me this is a remnant of old design where FCP 2 (i think) captured media to a temporary file and then moved it over ... modelled perhaps on photoshop's "scratch disk" temporary files? all sounds very temporary and makeshift. how about just a "final cut media" folder?
this is a bit irksome as final cut becomes more and more fussy about where it stores (and keeps) files.
end of today's musing.
R.

.txt files in db folder in Essbase apps

Hello,
I am loading the data in to Essbase and I though it would be a good idea to sent the files in the app->appfolder->dbfolder and load it from there.
But unfortunately I am not able to see large files of about 52mb in EAS when I am trying to load them.
Is this any restriction in Essbase that larger files won't be visible in EAS?
Thanks
Hemanth
Edited by: HemanthK on Jul 21, 2009 11:52 AM

Hello,
Issue is solved.
Please check the below link for solution.
Re: .txt files in db folder in Essbase apps
Thanks
Hemanth

Issues with app-v 5 hotfix 4

Hello, we are testing the upgrade from app-v 5 sp1 to sp2 with hotfix 4.
we expierence an issue, after applying hotfix 4 to the client not all applications are published.
i will explain the situation,
after applying hotfix 4 everything seems to work fine, but when we remove all packages and then sync with the publishing server not all packages will be published again, in my case on 2 of the 5 packages are published.
we are using http(s) publishing, when we publish the package with smb there is no issue.
example https:
and in the eventviewer the next error appear:
error 14016:
The package {73b79dde-518f-4441-a4bb-b91dc2806550} version {789457e0-2cbd-440d-a605-0cf0f8b4f518} could not be mounted because the network connection has been lost or is unavailable. Check your network connection and try again.
and error 1008:
Package {73b79dde-518f-4441-a4bb-b91dc2806550} version {789457e0-2cbd-440d-a605-0cf0f8b4f518} failed configuration in folder 'C:\ProgramData\App-V\73B79DDE-518F-4441-A4BB-B91DC2806550\789457E0-2CBD-440D-A605-0CF0F8B4F518' with error 0x4C40280C-0x80190191.
the used path is accessible,with sp2 without hotfix 4 there is no issue.
does someone have a clue what might be the problem?
Thanks,
Johnny Bos
The Netherlands

To switch from http to smb, there are a few options.
The easiest and supported method is to use the PackageSourceRoot setting on the client. Here you can enter something like '\\myfileserver\software_packages$\App-V\content'. If you current packages are located under 'http://MyStreamingServer:80/content/',
all would be good.
On the Server side, the only supported method would be to store a package's information (+ user assignments + imported configurations + manually modifed configurations +... maybe others) into a temporary variables, remove and re-add the package using Powershell.
To bad: the 'set-appvserverpackage' does not allow to just modify the URI.
An unsupported (but perhaps also working) method would be to find the URIs in the SQL database and modify them there directly
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

Home Folder Issues after data drive move.....

Hello All,
I have a Mac OS X Server Leopard (latest version) that we have had running without too much troubles for some time now. When we ran out of space, I added a new large hard drive into our xServe and dittoed the user home folders to the new drive. I unshared the home folder file on the old drive, and then setup an identical share on the new drive. When users login on the mac, the system finds the home directory on the new drive fine, no issue.
The problem arrises when the user does a connect to server request. Their home folder comes up in the list and they mount the drive. However this share-point seams to be the folder still on the old drive. I have now deleted the folder containing the user home folders on the old drive, but it simply gets recreated when as user does a connect to server request. This folder is not longer shared and I can't understand why it still comes up with this old share point.
It is not a huge issue, but rather annoying.
Any ideas would be great.
Thanks
Michael

Functionality for customized setups may differ slightly with a new os. Power cycling the device daily is always a good idea for maintenance.
I don't really consider having groups of icons on my home screen a customized setup. This is a native feature of the Android OS and something on the update caused this issue. I've been running 4.3 on two other devices (Nexus 7 and Sprint Galaxy S4) for months and I've had zero issues. If I didn't use folders I would need to fill up 3+ home screens just to have enough space for the apps I have on my main home screen. I have an identical setup on the Sprint Galaxy S4 (test phone for work) that is running 4.3 and I don't have this issue.
Second, are you officially saying that rebooting an Android device on a daily basis is a best practice? I typically reboot my phone every couple of weeks, but daily seems a bit excessive. Since the update I have to reboot at least once every 2-3 hours during the day to resolve the folder issue. It's the first thing I have to do in the morning to be able to access any apps that are within a folder.

IPad mini now terrible to use, apple support no help because warranty is up. All cause by new ios8 update, wifi issues, many apps no longer work, apps that do work now crash regularly and sometimes take several instances and reboots to even open.

IPad mini now terrible to use, apple support no help because warranty is up. All cause by new ios8 update, wifi issues, many apps no longer work, apps that do work now crash regularly and sometimes take several instances and reboots to even open.

need help uninstalling ios8 and going back to 7 where things worked please.

Issue with Apps adapter for Create_Cust_Account API

Hi ,
I need to invoke this package from apps adapter in BPEL(10.1.3.5).
Create Customer: HZ_CUST_ACCOUNT_V2PUB. create_cust_account. This is a Over loaded procedure. Look for the Procedure with these Parameters.
PROCEDURE create_cust_account (
p_init_msg_list IN VARCHAR2:= FND_API.G_FALSE,
p_cust_account_rec IN CUST_ACCOUNT_REC_TYPE,
p_organization_rec IN HZ_PARTY_V2PUB.ORGANIZATION_REC_TY
PE,
p_customer_profile_rec IN HZ_CUSTOMER_PROFILE_V2PUB.CUSTOMER
PROFILEREC_TYPE,
p_create_profile_amt IN VARCHAR2:= FND_API.G_TRUE,
x_cust_account_id OUT NUMBER,
x_account_number OUT VARCHAR2,
x_party_id OUT NUMBER,
x_party_number OUT VARCHAR2,
x_profile_id OUT NUMBER,
x_return_status OUT VARCHAR2,
x_msg_count OUT NUMBER,
x_msg_data OUT VARCHAR2
But I’m getting the following error,
An error occurred while running Jpublisher.missing method
· I’ve tried with Database adapter. But in the runtime I’m not able to pass oracle apps initialization parameter in spite of using transaction and idempotent property in partnerlink.
· Then I’ve tried to invoke fnd_global.apps_initialize first then call the package from database adapter, but it fails again, apparently its not able to execute both DBadapter in same database session although they are in same BPEL transaction.
When I’m passing the initialization parameters in adapter created wrapper procedure then its working fine and customer got created.
Please let me know where I’m going wrong or issue with apps adapter.
It’s urgent …
Thanks in Advance,
Shreekanta

Thanks for the reply.
I'm able to execute the BPEL flows using DB adapter in same session and customer got created.
But I'm wondering why I cant invoke the API using Apps adapter though its standard one.
wsdl file is not getting generated as the adapter wizard not get completed.
Do u have any idea why its giving ' error occurred while running Jpublisher.missing method' error?should I conclude that apps adapter does not support overloaded procedure.

HT1766 I have installed Proloquo2Go and need to know if everything I put into a new folder in this app will be saved automatically or how do I do this and not lose photos and folders?

I have installed Proloquo2Go and need to know if everything I put into a new folder in this app will be saved automatically or how do I do this and not lose photos and folders?

Hello dancetoday07,
Let's see if we can square this away for you. With backing up your iPhone, it will back everything you have using iTunes and if you use iCloud, by default, backs up everything. After you have made a backup you can restore that to put the contents of the backup on your replacement iPhone. If you want to put certain things back on, you will at least need to export the content to your computer, like your photos and videos. If you only want to put certain things back on, then you will need to sync that over with iTunes. All the information you will need are in the articles below.
How to back up your devices using iCloud or iTunes
https://support.apple.com/en-us/HT203977
Restore your device from an iCloud or iTunes backup
https://support.apple.com/en-us/HT204184
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC
https://support.apple.com/en-us/HT201302
Sync your iPhone, iPad, and iPod with iTunes using USB
https://support.apple.com/en-us/HT201253
Regards,
-Norm G.

I have a Windows 7 Professional, 64 bits on my computer and have recently installed iTunes 11.1.3.8. but i started having this msg :"The folder iTunes is on a locked disk or you do not have write permission for this folder" issues: how can i solve it?

I have a Windows 7 Professional, 64 bits on my computer and have recently installed iTunes 11.1.3.8. but i started having this msg :"The folder iTunes is on a locked disk or you do not have write permission for this folder" issues: how can i solve it?

Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and SYSTEM full control of this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7 shouldn't be too different.
If it won't let you change the permissions use the Owner tab to take ownneship from an account with administror privileges.
tt2

Sharer folder issue between two directly connected PC

Dear All, I have an issue regarding folder sharing. need your help to resolve this. the scenario is
two PC's are connected directly to share a folder, to open *.mdb file of a accounting software. this problem start when I moved windows XP PC's and installed windows 7 64 bit PC's. there is no compatibility issue as I run the same software on other
locations
PC A (192.168.1.200) has that *.mdb file and PC B (192.168.1.100) has to open this file through a network.
when I configured the folder share and network setting, all done well and PC B can connect with PC A and that software work well. After two days, when we start the software at PC B, its not responding when it try's to open that database file.
while analyzing, I found out that PC B can open the share folder of PC A but when open the desired database folder explore starts not responding and need to quit it by force. I also tried to share another folder of PC A but results are same.
PC A run the software with out any problem.
It seems like network issue, so I check the cable with cable tester, found it good, than I check the connectivity by ping command, it giving me <1ms time. but still change the connectors.
the hard part is that, this share folder issue arises 3-4 days a week and 2-3 days it works well, and this is happening from last 28 days. I mean, one day we start the the PC B and use the software via network, the next day we start the PC B and we don't
able to use the software,..strange.
I also change the cable connection from cross to straight as both new PC's have gigabit Ethernet but results are same.
I already contact with software company, as per them its network issue as we can use the software on local PC (PC A) and there is no error messages popup.
please help me out in this regard.
Thanks Tanveer

Hi,
Firstly, we need to identify is this file sharing or netowrking problem. If you can access to the shared folder and modify its files which locate at PC B through PC A, it indicates file sharing works with no problem.
After that, we need to check if its networking or software itself problem when reading the .mdb file.
Put the .mdb file at PC A, then using the software open it for test. If no problem, we need to use Process Monitor to capture the access trace of the software process, we should be able to find some clues.
You can access to the link below to download Process Monitor:
https://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
How to capture a Process Monitor trace:
http://blogs.msdn.com/b/dswl/archive/2010/01/10/how-to-capture-a-process-monitor-trace.aspx
Learning Example:
Using Process Monitor to Troubleshoot and Find Registry Hacks:
http://www.howtogeek.com/school/sysinternals-pro/lesson5/all/
Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Roger Lu
TechNet Community Support

Folder for Macintosh Apps

Is there something like a folder for Macintosh Apps (as on iPhone/iPad)? Right now the Mac Apps I've downloader are swallowing my dock. There must be an App for That!

mpsears wrote:
Apple (or someone) just needs to create a MAS Dock Folder.
alternatively, check out [HimmelBar|http://softbend.free.fr/himmelbar>.
JGG

Can't Export ALL Comments from Issues Tracking app in Sharepoint 2013

I really like the flexability of the SharePoint 2013 Issues Tracking application. I am able to enter the initial issue, then update it regularly with "comments". Each comment is added as a seperate entry to the issue, date stamped, etc.
The issue I am having is in exporting this to Excel. I know, I know, the purpose of SharePoint is that you DON'T turn everything into an Excel spreadsheet. However, I have to send the issues to an external contact that does not have access to the SharePoint
environment. When I export to Excel, it only adds the LAST comment to the Comments column in the spreadsheet. I need all comments combined, and dropped into the correct cell.
Is there a way to do this? I found another thread where it seemed everyone accepted the fact that this was not possible, but I thought I'd try one more time and see if there were any new ideas.
I believe this is tied to the option of "Append Changes to Existing Text" that is available in the Edit Column settings for the Issues Tracking app. I see that you can turn this off, but then you lose the ability to date-stamp each entry. If there
is no good solution, then I think the only alternative would be to turn this off, then just manually add a date to each time.
Word of caution!! If you have a bunch of comments already appended, and THEN you decide to change the option from Append Yes to Append No, it will hide all previous comments. I did this and thought I'd lost them, but when I changed the option back
to Append Changes, they were all still there. I may need to manually cut-paste every single comment out, change to Append No, and then manually past the entire comment thread back in. Will be very tedious for a large issues log.
Thank you.
Bill

Update - The only solution I was able to change to "Append Changes to Existing Text", then do as I dreaded, which was to manually cut and past every comment out then back into the single field. Definitely a good lessons-learned to set the
value to "Append Changes to Existing Text" before starting.

How to access virtual folder in oracle apps 11i?

Hi,
how to access virtual folder in oracle apps 11i?
Version=11.5.10.2
please help
Thanks,

I'd use BI Publisher (XML Publisher) Bursting.
Regards,
Gareth
http://garethroberts.blogspot.com
http://www.virtuate.com

Issue Tracker App Demo

As I'm a newby to htmldb, I'm building the Issue Tracker app demo. Did anyone who has already built the demo have trouble with create/edit Person information on page 4? When I submit, I get the following error:
Error ERR-1025 Error processing PLSQL expression. (:p5_person_role in ('CEO','Manager') and :p5_assigned_project = '%||'null%') or (:p5_person_role in ('Lead','Member') and :p5_assigned_project != '%'||'null%')
OK
ORA-06550: line 2, column 29: PLS-00103: Encountered the symbol "NULL" when expecting one of the following: . ( ) , * @ % & - + / at mod remainder rem and or || multiset
Any assistance would greatly appreciated

Glenn,
Looks like a syntax error in a condition: a missing quote: :p5_assigned_project = '%||'null%')
should be
:p5_assigned_project = '%'||'null%')You'll have to poke around to find where that condition exists (on a region, an item, etc.). Or you could search for it in the export file.
Scott

Can u please give me two critical issues in app

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
can u please tell me two critical issues in app and explain me how i can solve that critical issues.
and also tell me two critical issues in account receivables or g/l accounting and explain me how i can solve that critical issues

There are no refunds.
You can try contacting itunes support and asking for an exception:
http://www.apple.com/support/contact/

Scratch Folder issue in APP-V 5.0

Similar Messages

Maybe you are looking for