Scratches on front screen

Is there a replacment front screen i can order for my fifth generation ipod? Or if i take it in for service, can they replace it? Cost isnt a issue.
Also, i have a dead pixel. There is only one that constantly is white even if the video is black or whatever. Is this covered under the warranty? or do i have to live with it!
Thanks,
Trenton Hord

I would recommend Applesauce Polish--see website below. I have a 5th generation unit also that had minor to moderate scratches and this worked very well.
http://www.applesaucepolish.com/
Is there a replacment front screen i can order for
my fifth generation ipod?
No.
Cost isnt a issue.
Buy a new iPod.
Google for 4 dollar can of Brasso and look for Todd
Dailey

Similar Messages

  • Scratches on the screen

    Despite how careful I was, my iPhone 4 has managed to get scratches on the front. Supposedly, it is supposed to be scratch proof... I have never dropped it or anything, the scratches must be from being in a bag or something. I there any chance Apple would fix or replace it for free? I recently read online about a guy who went into the Apple store for the exact same problem, and they replaced it for him. Free! Or does anyone know of a scratch remover? This is on the front screen (glass)
    Thanks

    Yes, really.
    From your link:
    "scratch resistant "
    Note - "scratch proof" is not mentioned once, anywhere, at all.
    Scratch proof, means that it cannot scratch.  This has never been claimed at all.  No glass is scratch proof.
    Scratch resistant means  that it is more resistant to scratches than untreated glass.

  • IPod Touch Not Working Properly After Front Screen and Housing Replacement

    So my son left his iPod Touch 4th Gen on my back bumper and it fell off out in our dirt/gravel driveway.  I finally found it, 7 days later, run over multiple times.  Front screen and back housing were demolished as you can see, but it still worked fine (except rear facing camera was done).  Ordered the rear camera, front screen and back housing assemblies off eBay from reputable sellers.  Took it all apart and reassembled it. Bada bing! Everything was working fine: camera, speakers, touch screen, wi-fi, all of it, for about 2 days .  It went from working perfectly, to being kinda glitchy (had to hold home and power to restart), to not turning on at all.  I read somewhere that if you don't clean all metal to metal contacts, it may interfere and not work properly, so I just took it (almost) all apart again, cleaned the contacts, and it turned on and was working, but this time only for about half an hour.  I've held down the home and power buttons for long periods of time, which sometimes got it to work, but now is not working at all.  Any ideas on what might be going on??? Is the screen bad?  Did I maybe miss a metal to metal contact (e.g. the power button, ribbon cable)?  Any really important ones that you can tell me about?  I really don't want to take it into the Apple store, but if I do, any ideas on a ruff guesstimate on what it's gonna cost me?  Thanks for any help!  I really appreciate it, I'd love to get this thing working for my 7 year old so I can have my d*** phone back!
    Before
    After
    (my kid scratched up the back already, gotta love it)

    Take it to somebody with more experience fixing iPods. Could be various causes.

  • How to fix a scratch on the screen...?

    Hey Folks,
    While I was at the airport yesterday - some smart *** bumped into me and dropped my iphone on the ground (face first) and I got a scratch on the sreen maybe 2cm long and .5mm width (same depth, I would say - sorry for being very technical)...
    Now when I turn on my iphone and when the light some on the screen there is a multicolor reflection coming from this scratch, which is super annoying cause when you are looking on your screen you can notice this multicolor reflection at all times.
    So - how can I find a solution to this? Is there any? Or I just gotta live with the fact that I have a noticeable (and super annoying scratch on my screen).
    Thanks,
    -Joey

    Smeagol7 wrote:
    What did you use and how did you use it? Sounds like you do auto body work. Can you give the details and instructions on how to accomplish this.
    No I'm not in the auto body biz, I do make detailing products though and my hobby is customs and hot rods.
    I use a very high end polish that's not found in stores but can be bought online or by phone. The maker is Zaino Bros... http://www.zainostore.com These polishes and glazes form a very tough protective coat on high end finishes. The cars in this link http://dftowel.com/lsc are treated with Zaino so this should give you an idea what can be achieved.
    To protect the phone I first lightly wiped it down with a dilution of Dawn dish detergent which removes all greases and oils that may be on the surface. Just dampen a sponge and wipe the surface.
    I then polished and buffed with Zaino Z-2. This was done three times front and back.
    For the final coat I lightly applied Zaino CS which is a hard glaze and allowed it to dry for an hour before using the phone.
    The buffing towel used is a DF Concours Towel http://dftowel.com. (DON'T USE AN OLD T-SHIRT!!! IT WILL SCRATCH)
    These steps will form a very hard protective coat on the phone and yet it is optically clear. Fingerprints, dust, smudges, whatever just wipe right off.
    Leo
    Message was edited by: LeoC2

  • Removing scratches from display screen

    I know they advertised this stuff on TV that magically fills in the scratches on your glasses...do you think it will work on the screen? Do you have a better product to remove them?

    I find it hilarious when persons such as yourself just make things up in complete oblivion. The warranty does N-O-T cover scratches. And... How did he get scratches on his screen, you ask? Because the material that covers the front of the iPod checks in at about a 1 on the hardness scale.
    To the OP... I suggest you Google...
    Ice Cream
    Apple Sauce
    iKlear
    Brasso
    All four should work fine.
    After removing the scratches, I highly suggest you purchase a screen cover...
    The Invisible Shield is known to do wonders.
    Good luck.

  • I have problem with scratch on glass screen of Alu iMac (mid 2007)

    I was accidently to clean it with kleenex and found glass screen were scratch then tried clean with apple cloth and found scratch on screen, I did called Apple to make appt for Genius Bar but want know if would fix the scratch on glass screen? How would cost?
    My iMac is still under 1 year warranty and after 14 days of bought from retail.

    Was the scratch there when you bought the machine or did you make the scratch?
    If you made the scratch then Apple will not repair it under warranty as it is not their fault.
    If it was there when you bought it then you will need to convince Apple and they may replace the glass for you. Otherwise you will need to buy a new front glass yourself.
    Ian

  • I have a scratch inside my screen...what are my options to fix it?

    I don't nescessarily take extra good care of my computer but recently I didn't throw my computer or anything..but i have a scratch on my screen like inside, digitally, but theres no visible scratchh on the actual screen...not sure how it hpapened. But I just got my computer 5 months ago, so I still have the insurance from apple not sure if it covers it, but can i go in and they'll help me with this? or other options for fixing it? also some windows i open start shaking... please help

    Since you're still under warranty, it wouldn't hurt to make an appointment at your local Apple Store or an AASP and have the techs take a look at it. If there's no 'physical' scratch then there may be a problem with your screen that can be fixed under warranty.
    And open windows should not 'shake' - another thing that the techs to evaluate.
    Best of luck,
    Clinton

  • Iphone 4s wont power on, im just getting a blank screen with battery charging on front screen

    iphone 4s wont power on, im just getting a blank screen with battery charging on front screen>>>>becouse it is after damage water

    At Apple Store, if you have AppleCare +, replacement iPhone 4S costs $50, if no +, then it will cost $199. Either your battery is faulty, the power management is faulty, or the charging port is faulty, or all three. Start with battery replacement. If still problem, then try charging port with flex cable replacement. If still problem, then it is very complex fix or no fix at all possible.

  • My iphone 4s fell from the bed and the front screen glass got cracked but the touch screen is working fine, so can i replace just that screen glass?? If not what am i to do ? And how much it might cost me for that repairing??

    My iphone 4s fell from the bed and the front screen glass got cracked but the touch screen is working fine, so can i replace just that screen glass?? If not what am i to do ? And how much it might cost me for that repairing??

    I don't know. You'll have to ask.
    FYI, if the phone was not originally sold in India, it can not be serviced in India. You will have to take it back to the country where it originated.

  • Tcode to enter text in the front screen

    I wanted to change the front screen display and the picture when i login to the system
    It is like , whenever a user enters the page of entering username and password to login to sap system, it should contain some text to the right side.
    After logging in it shoudl show a picture to the right.
    Pls let me know the two  tcode for the same

    Hi Balaji,
    For creation Own text on SAPGui logon screen plz go thru the note:205487.
    for having ur customized picture follow the below steps.
    Transaction code - SMW0
    X - Binary data for WebRFC application
    Hit Enter
    Click Execute
    Click Settings -> Maintain MIME types
    Click the Create button
    Fill in :- TYPE : image/gif EXTENSION : .GIF
    Click Save
    Click Back to the Binary data for WebRFC
    Click Create
    Fill in :- Obj. name : ZXXXX.GIF Description :
    Company Logo
    Click Import and specify the filename where your
    GIF file is
    located.File type is BIN. Finish press the
    Transfer button.
    If successful, your logo will be shown in the
    Binary data for
    WebRFC.
    Transaction code SM30 - Table/View - SSM_CUST
    Click Maintain
    Click New Entries
    Name Value to be set
    START_IMAGE ZXXXX.GIF
    RESIZE_IMAGE NO
    Logoff and Login again
    Reward with points,if you feel it helpful.
    Regards,
    Laxman

  • Can't change the phone number that appears on the front screen

    My phone used to belong to my mom and I had it unlocked so I could use it overseas.  However, her phone number still shows up on the front screen even though I've had 2 different sim cards in it, each with their own number.  How do I change it to my current number?
    Cindy

    Hello chilkootcindy and welcome to the BlackBerry® Support Community Forums.
    Sorry to hear you are having an issue with your phone number display on your BlackBerry® Tour™ 9630 smartphone.
    When your mother used this BlackBerry did she use a SIM card or not?
    This article KB01889 "My Number - Unknown" appears instead of the user's number on the BlackBerry smartphone" will show you possible causes the incorrect phone number doesn't appear on the BlackBerry.
    Hope this helps!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • I have just installed ios6 and some of the icons on the front screen have gone, how do i get them back?

    i have just installed ios6 and now some of the icons i had have gone from the front screen, how do i get them back ?

    Widgets are located in the folder, users/"user name"/library/widgets/
    Whilst holding down the option key in finder, and selecting the library under the "go" menu, you can access your library within Lion.
    If you have a working Time Machine backup, you can restore those missing files back to the widgets folder. If you don't, and your widgets folder is empty, then they are indeed gone (unless they are still in the trash). You would then have to re-download them from where they came.
    If everything is there, then just click the "+" symbol at the lower left corner of the dashboard screen to add them back to the window.

  • Nokia N97 - adding apps to the front screen

    I want to add downloaded applications to the front screen. I tap on one of the empty spaces and the home screen and select "download content" this takes me onto the Ovi store website. I've downloaded a couple of applications and they appear in the Applications folder under settings. But when I try and add these on the front screen by clicking "add content" they do not appear in the list.
    How can I add them to the home screen? thanks

    Find the website you want to have as an icon on your "desktop" Find or create the image that you want to use as an icon. Then go to this web site:
    http://webclip.us/
    and follow the directions. A little complicated at first but you get a great icon/link on your home screen.
    gordo

  • ADding image in Front Screen

    Hi,
    I wanted to display my company logo in the front screen in sAP,where we enter the user name and password
    I know that we can add text in the front screen, but dont know of how to add image in the front screen
    Please help

    Hai,
    Check the below link.....
    http://www.synactive.com/tutor_e/lessond02.html
    http://www.saptechies.com/adding-text-to-the-sap-logonlogin-screen/
    Regards,
    Yoganand.V
    Edited by: Yoganand Vedagiri on Feb 18, 2009 4:22 PM

  • Is it possible to add pushbuttons to the SAP Easy Access Front Screen ?

    Dear gurus.
    Is it possible to add pushbuttons to the SAP Easy Access Front Screen when a person logs in?
    if so how can we achieve it ?
    Regards
    Saad Nisar.

    SAP Standard Menu
    SAP Standard Menu helps you in including your own menu within the Sap menu bar .It helps us in making own function related to the program, sub routines or any transaction. The main advantage of this standard menu is that u can even modify this menu according to your client or project needs.
    The main advantage of the SAP Menu bar is that it can find specific transaction without knowing the transaction code.           SAP Menu is determined by the task you are doing in the SAP R/3 system.
    Menu are like Drop down list ,as when you click on any particular menu item, further options will be displayed.
    You can have as many as standard menu bar in the SAP Standard menu.
    The SAP Menu Bar contains the menus for the functional and administrative areas of the system.
    Features of the Sap Menu Bar are as Follows
    Menu     Description
    System     It contains all the function that affect the system as a whole such as Create session, User profile and Log off
    Help     This menu provide various types of online help that are available in R/3 system
    Following are the Steps how to modify the SAP Standard Menu Bar
    Transaction code SE41 is used for displaying the Menu Painter Menu. 
    Now in the Program field ,Type the MENUSYST  as the Program Name.
    Now in the Status field choose the option MEN by using the F4 help .
    After choosing the MEN option for the Status field, click on the Change then the Following Screen will be displayed
    Click OK and move Forward , it is just Alerting that Menusyst is a user interface .
    After that the Following screen will appear with Modify Status Men in Program MENUSYST
    Double click on the Menu bar shown in the Left side of the Screen .Such as the Menu bar will open .
    Double click on the System such that list of menu will be displayed .
    Now you can See there  are two columns  present in the system menu ,One is Code column and other is Text column. Right Click on your desired location of these two column such that it will show the option.
    From the option menu choose the option Insert Entry . By choosing this option a new row is inserted in the System menu . when the New row is inserted then type Menu  in the code field and My Option in the Text Field as follows. Both the code field and the Text Field name depends on your requirments.
    Now Double click on the Menu of the Code field such that Function attributes window will open.
    In the fuction type choose the function type as T (Call a transaction).and then Click Ok.
    After Selecting the Function type . Click on the Ok button of the fucntion Attruibute Screen .
    After that activate the Function by selecting the Menu in the code field and click on the Fucntion Code button Present on the top of the Sap Screen .
    Now Save (Ctrl +S ) interface of the program MENUSYST  .
    Now Activate (Ctrl + F3) interface MENUSYST as follows .
    Now Come to the Initial screen of the Menu Painter i.e . SE 41 ,so as to test the modified SAP Statndard Menu ( by Pressing F3 )  and Type the Program As MENUSYST and status as MEN and then Click Test Button .
    After clicking the Test Button the Status Simulation Screen will appear , just click Excute button on that popup screen.
    Now the Menu Painter Intial Screen will appear such that you can test your function code there. Now Click on the System menu in the Menu Bar
    After clicking to the System Menu , the list of the option will open and our Customized /Modified SAP Menu will appear into it as follows .
    Now you can See that the My Option Menu appears on the Standard System Menu. There are various Advantages of the modification of the Standard Menu which are discussed as follows .
         Code Flexibility, As We can choose our own predefined Standard Menu fucntion in the Program as required by the client.
         Independency . Sap program is independent of various other supporting program that are supporting to the defined function.
         Ease of Code . More Uniformity is established between the Standard Menu function.We can include our own predefined fucntion module within this standard function module
    Deactivating of the SAP Standard Menu
    You can just move to the MENUSYST Prgram through SE41 Transaction Code . then Select the MENU option which you had customized and then click the Function Code again in the SAP screen.
    Then Message will be Displayed that Function MENU is Deactivated as follows .
    Now Save and Activate the interface MENUSYST. Test the Program using the Initial Screen SE41
    And check the System menu in the Menu bar ,then the My Option Menu is deactivated .

Maybe you are looking for

  • IPhone 4 no longer automatically launches iTunes

    My iPhone 4 no longer automatically launches iTunes. In iTunes, the box is checked that says "Open iTunes when this iPhone is connected." I've checked and unchecked that box, restarted the computer, etc., but nothing I've done has fixed the problem.

  • Problems with clipping mask, Photoshop CS6

    I have been working with a clipping mask around a complex item. This included a large clipping mask around the edge of the item, along with sections inside this path that were also 'cut out'. I am not sure how, but I seem to have done something which

  • Backing up all my pics on DVD

    Once again, on opening the Finder window, I am a rabbit dazzled in headlights (OS9, by comparison, was a model of clarity). As far as I can tell, all my family's photos are spread across the three Users' folders, depending on who uploaded them from t

  • Site definition disappeared [was: I need some help...]

    One week I signed on DW to update my website.  The next week I came back to update my site.  When I logged in, the site was gone in the sign up.  What happened and do I just need to reset up the site?  Thanks! [Subject line edited for clarity by mode

  • Table s804 not active in dictionay

    Hello, Please help me: what can I do if I get the message "table s804 not active in dictionary"? Thank you! Regards, Ileana