Scratchy distorted sound from SB L

Everything was working fine with Sb Li've until a few days ago when the sound turned wretched for everything from the Windows Log On Music to .wav files. I have checked everything including the speakers. I have looked for hardware and software conflicts everywhere.
The one thing that I have observed is that if I pull the miniplug out of the jack on the sound card and leave it halfway in I get one channel of sound that is pretty normal. When I push plug all the way in, the distortion continues. Sounds like this is a sound card problem even though it is less than 2 months old. Anyone have some ideas?
DougO

Could be a defecti've jack, I guess. Have you tried headphones?

Similar Messages

  • Distorted sound from some CDs on Pavillion dv6

    Approx 5% of my CDs have a distorted sound and are unlistenable. It is nothing wrong with the CDs, they play alright in my Lenevo T61 or McBook Air. The CDs are both new and old. It is the same using iTunes or Windows Media Player. Anyone experienced this and is there any solution?

    Hi,
    First, try the automated fixit from Microsoft on the links below.
    Windows 7
    Vista
    Check if your CDs sound ok now.
    If they don't, from the Start Menu, open the Control Panel and click on Device Manager.  Click to open the IDE ATA/ATAPI Controllers.  Right click on the first channel and select uninstall.  Do not delete drivers if asked.  When uninstalled repeat the process for each channel.  Also if an ATA controller is listed, right click and uninstall this, again not deleting drivers if asked. Then open DVD/CD-ROM Drives.  Right click the drive and select uninstall.  Do not delete drivers if asked.
    Reboot the PC and let Windows reinstall the devices.  Check the sound from your CDs again.
    If it still doesn't sound ok, run the automated fixit from Microsoft on the link below again.
    Windows 7
    Vista
    Next, from the Start Menu, open the Control Panel and click on Device Manager.  Next click to open DVD/CD-ROM Drives.  Right click the drive and select uninstall.  Do not delete drivers if asked.  When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ).  Let windows reinstall the drive and see if your CDs now sound ok.
    Hope this helps.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Messy 'pixalated' distorted sound from multiple interfaces

    I was just about to send my Apogee Symphony card and Apogee Rosetta 800 back to Apogee to repair because I have been getting this really nasty distortion sound across all audio coming out of the computer, even in iTunes or whatever. If I turn the unit off and back on again, it will work clearly for 10 or 20 minutes, then it just clicks into this distorted sound. So... I've been using an M-Audio FireWire 410 for the past couple of weeks without incident, and then the other day, it made a small 'pop' noise, and started playing that same distorted playback. If I turn this unit off and back on again, it will play fine for a couple of days, but it has been 'popping' and then playing back distorted off and on. Does anyone have any suggestions? I know this isn't Logic specific, but I'm in Australia, and sending stuff to California for unnecessary repairs will get costly. Thanks in Advance.

    thanks for the help... I was using both interfaces together for about 6 months, with no issue, and the clocking was set for the apogee to be the main clock and the M-audio box to sync to it. I have tried using just the apogee box and clocking to its own clock but the problem persists.. could be the update.. when I left the U.S. 2 months ago, all was good, as soon as I hooked the gear back together in Australia I started getting this problem.. I'm sure I just installed the OSX update with the auto installer function. any other suggestions now that you know a little more?
    thanks again, you guys rock.
    dp

  • Terribly filtered, and distorted sound from iTunes.

    My songs will play in iTunes, but they sound heavily filtered, and distorted. I tried playing the same original files from the original folders with multiple other media players, and had no problems. I thought I had done something when I was doing some batch editing for genre, eq, and volume settings, so I re-synced my iPod, to see if it inherited the same sound problems. Everything sounds fine, with the iPod, but for some reason, the iTunes software is distorting the sound. I've been through all of the menus, but have not come accross anything that I feel would possibly solve the problem. I even went back, and reset the volume, genre, and eq settings I adjusted for the tracks, still no help.
    What's worse...the next day, I loaded it up, and everything was working again. I had some other stuff to do in my studio, and decided to come back later. When I returned...everything sounded all whacked again!!
    Any feedback would be greatly appreciated. I don't usually post comments, or questions, in forums. feel free to email me, at [email protected]
    Thanks,
    Figment.

    http://docs.info.apple.com/article.html?artnum=93610h
    Try this

  • Clicking/distorted sounds from Sculpture

    Hi there, I have been having some problems with Sculpture.
    In particular when using "The Dark Land" synth. I hear small distorted noises when playing the synth as if there are some excess frequencies? I have tried hi and low pass filters and EQ'ing but I even hear the "clicking" sound on my high quality audio speakers? I have a feeling it's a very simple preset I am overlooking...
    Thanks for any help!

    Hi,
    Sculpture is a very advanced (spell: c o m p l i c a t e d) synth in some ways. Some results may be very strange if you don't understand how the sound is created. For example: If you hit the same key twice, sculpture will simulate a second strike (or hit or blow or whatever) to the same string that is already resonating from the first hit. This is like a real instrument, when you hit a key on a piano twice, you will hit a string that is already in motion, and maybe this second hit sounds totally different - depending on the circumstances. On a Fender Rhodes, you can by accident "stop" the tine with a second key press, if you hit it in the right split second. That's why a real instrument always sounds different to a sampled. Sculpture tries to simulate this.
    HOWEVER, in "the dark land", simply deactivate Objects 1 and 3, since they are so weak that they don't influence the sound at all, but especially object 3 creates some artifacts. Maybe this is your problem.
    Fox

  • Distorted Sound from MacBook

    Whenever I am playing any sort of sound at a medium to loud volume, the sound is distorted. At first I thought my speakers were blown, but they work fine with my iPod and other people's computers. This also happens when I have sound ran through my FireWire recording interface, so it is obviously an internal problem. What could possibly be going on?

    If your sound is distorted through your internal speakers, external speakers and headphones, you more than likely have a problem in the sound circuit on your logic board. Contact Apple if you are in warranty and get it serviced.
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

  • Distorted sound from the X

    I have an X-Fi Xtrememusic, and it crackles and distorts badly when running video. When I turn off the Directdraw acceleration, it goes away. However, when I do that, I can't play any games. Does anyone have any idea how to resolve this? I'm running a Radeon 9200 PCI vid card.

    Please follow the below document  Under the heading check for Microphone setting.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00833331&tmp_task=solveCategory&lc=en&dlc=en&cc...
    Please try to check with a different player.

  • Problem with XFI platinum fatal1ty sound from panel but not from c

    Hi
    I just got an XFI platinum fatalty card with front panel, I have only been able to get sound out of the ports on the acctuall card for about 3 minutes then it screetched and went off. Since then the most I can get is an EXTREEMLY quiet (I need to turn up my speakers and the card volume to full) and distorted sound from my center and rear left speaker (5. set). However the wierd thing is when I plug in the headphones into the front panel it works perfectly, the thing is if i switch it back to speakers i have to restert before the headphones will work again.
    I have tried to update the drivers but there are no newer ones, I figure I have it seated correctly or I would have no sound from the panel, I just dont know what to do.
    its plugged into a Asus Crosshair nForce 590 SLI AM2 Motherboard, I have tried it in 2 different PCI slots and nothing changes, I'm running XP.
    Help please, it would be much appreciated, I went through hell to get this card deli'vered and not its not working properly!!!
    Any ideas?Message Edited by C4TS on -09-20072:42 AM

    Is there anybody with any idea what the problem might be?

  • I cannot get any sound from my ipad. I tried youtube, pandora and. Iseos and none have any sound. I have checked the control panel and the sound is "on". Any suggestions?

    I Am not getting any sound at all from my ipad. I have checked the control panel and it says the sound is "on". Any other suggestions? It has worked just fine in the past.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
    Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can’t hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

  • A1000L IdeaPad No Audio Sound from Speakers

    Our IdeaPad A1000L was working great for a while, but now it will not produce sound from the speakers.  At first I assumed I somehow had it set to silent even though the volume bar was all the way up.  I reset all my audio settings.  Then I realized the audio works fine from headphones.  I did a full reset on the tablet, and still no sound from speakers -- only from headphones.  I have read a similar thread where it was suggested that this might be caused by damage to the headphone port, but I rarely use headphones, and don't think I'd ever used them before with this device.  Still, I tried jiggling the headphone thing around in there like suggested and it's still not working.  When I look in there with a flashlight, it looks exactly like the inside of the headphone port on our other IdeaPad.  Is there anything else I can check/try before taking it in for service?

    Hello rkrohatgi,
    Thank you for the details of the issue you are experiencing and the troubleshooting steps you have already taken.  It sounds like you are seeing a screen similar to this when trying to adjust the volume:
    I recommend the following steps for an issue like this (you can skip any of the steps you have already taken):
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, followthese troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    You can find the full article here:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Bdp-s1500 No sound from Apps apart from Beeps

    I've just installed my BDP-S1500.It works fine for DVDs. My TV is a bit temporamental, so I've had to force the the video to output at 720, but now I'm having problems with the sound. Disks are fine, but some apps are buggy. Example. YouTube gives the clinks and beeps as you move and make selections. However, the clips themselves are silent.Netflix is silent. Amazon has sound.Berlin Phil has sound I have tried numerous HDMI cables into numerous numerous HDMI ports, all with the same results.Any ideas?I've updated the firmware and done factory resets.Any ideas? Thanks.

    Hello Louise,
    Thank you for the details of the issue you are experiencing with sound on your iPad.  I recommend the following steps for an issue like this (the steps refer to an iPhone but are also applicable to the iPad):
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, followthese troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    You can find the full article here:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • No sound from my phone handset

    no handset voice

    Hi there Agent-turkey,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    -Griff W. 

  • I can't hear any sound from my earpiece for incoming and outgoing calls or music playing for 5s

    hi can anyone help me?, i have an iphone 5c about 2months old and randomly today i tried to play music but there was no sound. When  recieve calls it rings i pick up and its quiet no sound nothing same thing when i dial a number

    Hello channyk,
    It sounds like you are unable to hear from your receiver on the phone and from the speaker as well. I would use the troubleshooting from the following article:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved, please contact Apple Support.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Inspire P7800 Headphone mic is getting speaker feedback which distorts sound

    My P7800 works fine my problem is in a game I get distorted sound from speaker feedback to the mic. Any solution?

    Heh,
    Well one of the reasons I bought the speakers was because my friend gave me a copy of FarCry he got bundled with something he bought. But now FarCry wont install heh, so I can't test it on that. I am trying to think of other games I have that use surround..hmm maybe HL2 does. I will do some more testing and wait a couple days to see what you guys think. If worst comes to it I will just buy a soundcard aimed at 7.1 .
    Thanks for responding jimby

  • My audio has a scratchy muffled sound sound when i watch vidoes. how do i get rid of that?

    How can I get rid of the scratchy muffled sound from the audio on my Laptop?  I hear this when I watch internet videos?
    Thanks,
    jameswj2

    Your iPod is in recovery mode. You'll need to restore the iPod through iTunes on your computer.
    Regards.

Maybe you are looking for