Scratchy sounds on my music

Trying to cram in more music onto my iPod Touch 32GB, I tried checking the bit-rate change. It worked, but I notice that some of my songs have this annoying static/squelch/scratchy sound. I hadn't noticed this before. I changed it back, but I still hear that on probably 10% of my music. I think it all comes from CDs I burned vs. downloads. Perhaps this has nothing to do with the bit-rate change. Any advice out there?

On the phone you don't.
If you bought them from iTunes, they are correctly labeled by the genre the artist and label say they are.
If you imported them from other sources or believe the artist and record label do not know what they are talking about-open iTunes on the computer the music is stored.
Open music.
Double cluck the genre column of the song and type what you want it to be.
Delete the music from your phone and sync the "corrected" song.

Similar Messages

  • Scratchy sound on my itunes library

    when i listen to music or watch a TV show on my itunes it makes a weird scratchy sound! some1 plz help!!!!!!
    THANKS ALOT!
    SECURITY337

    Try this:
    http://docs.info.apple.com/article.html?artnum=93610

  • Airport Express - Airtunes Scratchy Sound

    Transmitting music via Airport Express to remote speakers via Airtunes produces scratchy sound. Not as good as connecting speaker to direct iTunes output via computer out-jack.
    I am using D-Link Router DIR-625 compatible with 802.11n
    Does Airport express have a sound fidelity limitation?
    John

    Does the coding and decoding produce some loss of sound fidelity?
    It is also important to note that the AX functions only at a 44.1kHz sample rate. When you play 32kHz or 48kHz data, iTunes sample-rate-converts the data in real time before sending it to the AX.
    iTunes uses a QuickTime CODEC to convert audio files to Apple Lossless, and then, uses AirTunes to send them to the AX. In turn, the AX uses built-in software that converts the Apple Lossless to an Encoded Digital Audio format. From there, digital audio is sent to a optical transceiver to convert the electrical signal to an optical one before sending it to the innermost part of the audio port. The digital output is a bit-for-bit match of the source stream. Little or no sound fidelity is "lost."
    However, for analog, the AX has a built-in DAC to convert the Encoded Digital Audio to Analog which is sent to the same audio port. In this case, some "loss" of fidelity can be expected. To overcome this, some folks incorporate an external DAC.

  • Scratchy sound in iTunes! (No problems in Quicktime) - frustrating!

    Hello everybody,
    When playing audio in iTunes 10 the sound is scratchy. If a song starts out very quietly, eg. with only an acoustic guitar, there is a very noticeable scratchy sound almost every time a note is played. This is extremely frustrating when listening to any kind of music.
    I'm on a brand new MacBook Pro, everything is up to date. I also had these sound scratch issues with my old MacBook, so I was hoping they'd be gone on my brand new MacBook... Guess not.
    Anyway, I tried EVERYTHING to locate the problem. Here's what I discovered yesterday:
    -I imported a brand new CD into iTunes
    -Then, when I played the imported files in iTunes, the scratchy sound was there. Frustrating.
    Here's what I don't understand:
    When playing back the very same files using QuickTime, or even using Quick Look in the Finder, there's NO scratchy sound. The output level is a bit lower, that's all - but no scratchy sounds whatsoever. The files sound perfect and awesome in QuickTime and Quick Look.
    So, what should I do now?
    Using QuickTime to play all my music seems pretty rediculous, to say the least. The whole point of iTunes is to organize and play your music. So this bothers me quite a bit.
    It seems to me that this is an iTunes issue.
    Hope to hear from some of you.
    Best,
    balloonhorsens

    Hi guys,
    Just stumbled across this post on Google and I just want to say that I am experiencing the same problem and I have the equalizer turned off! I am running my iMac with a USB sound card to my amp and into B&W floorstanding speakers which all work VERY well.
    Similar to the guy above my songs are playing very well with QuickTime - not a problem at all, but with iTunes 10 something isn't quite right. Basically when a song gets slightly bassier it tends to sound scratchy - e.g. A hard strum of a guitar. I know this isn't right and I am certain it is an issue with iTunes - the equalizer is turned off but sound check is on (with sound check off it sounds worse).
    What I struggle to understand is that all of my songs have been sync'd to my iPhone 4 and those songs which sounded scratchy on iTunes on my iMac sound fine on he phone - even when I go out of the headphone jack of my phone straight to my amp!!
    Please, please can somebody resolve this issue - I love high quality sound and if the iMac insists that I play and organize a bulk of my music with iTunes then it needs to sound right because at he moment the likes of John Mayer are sounding rough!
    One of the main songs we could use as an example would be a song by Mumford and Sons called "After the Storm".
    Thank you in advance to anybody with any advice.
    Luke

  • Scratchy Sound When Sliding Through Covers in Cover Flow View in iTunes 8

    Anyone having problems with a scratchy sound as you slide through covers in the cover flow view in iTunes 8?
    Also sliding too fast has caused app to crash.

    The scratchy sound seems to have come up a few times with iTunes 8 (including in a couple of other threads that I can't find right now). It seems to have picked up around the last QT update, which was coincident with the iTunes upgrade.
    (post updated)
    I must admit, I didn't read closely at 7:30 in the morning, and didn't see this was just happening to OP with cover flow.
    But there have been a number of people (including me) complaining of general scratchiness in iTunes 8 and AirTunes that seems traceable to the last QT update. Be glad you aren't in my situation, where it's ALWAYS scratchy.
    Message was edited by: NHRadar

  • I have FCE 4.0.1 and running OS x 10.7.5  when i burn my movie the audio from my movie clips don't come through .  My Sound effects and music can be heard.  I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.

    I have FCE 4.0.1 and running OS x 10.7.5  when i burn my movie the audio from my movie clips don't come through .  My Sound effects and music can be heard.  First I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.  everything sounds great in preview but then ( once again)I lose my audio from my movie clips.

    Try Mixing Down the audio before export.
    This info may help;
    https://discussions.apple.com/message/1060680?messageID=1060680&amp%3b#1060680
    Also serch this forum for Mix Down you should find lots of info.
    Al

  • Scratchy sound dynex 27" tv

    Hello, I purchased a 27" dynex for christmas.  since day one it had scratchy noise from the left speaker, it was only a few channels at first but slowly progressed until almost all channels were affected.  I took it back to BB who sent it off for repairs.  The tech. called me while working on the TV and said he didn't hear any scratch sound but would replace the speakers and sound card anyway.  Got the TV back and within 1 hour started hearing the scratchy sound again.  Now, before I take it back again, how can check to see if it is the cable signal or not.  Or should I just take it back to be looked at again?  I'm using coaxial, would changing the input make a difference?  Thanks, Jeff

    are you using the correct audio input mode on the dynex because if not i know what you are hearing? check the various input modes plus the various output modes on your cable box also because it may be the output mode causing it and not the input mode if you are using a cox box that is. i can put my dynex on the wrong mode also and can't even understand a persons voice its so bad. check everything it may not be the tv it's most likely the tv's settings instead or the converter box settings.....

  • My sound works for music but not apps

    My sound works for music but not apps

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
     Cheers, Tom

  • No sound through my music player

    my case number is 537799391
    Not able to hear sound from my music player. even after restoring my ios 7. 

    That's too bad.
    If you have a case number due to working with Apple Support on the issue, take it up with them.
    We are all users here like yourself.

  • Problem finding my sound effects and music in final cut pro X

    I am having a problem finding my sound effects and music in final cut pro X.  I just bought a new i
    Mac, because my Mac pro died.  when I was using the mac pro, I had final cut Pro X loaded, and in the Music and sound library, I had stock tracks from APM music that came with final cut.  now that I have loaded final cut to my new computer, I do not see those tracks.  Am I missing something?

    The FCP X sound effects were an additional external download and were not kept in the FCP X application.
    You probably need to re-download them.
    In the FCP menu at the top left of your screen you will see the download link.

  • Why is it that my iPhone 4 suddenly lost the sound bar in music and YouTube?  I am able to make phone calls, but otherwise my iPhone is silent.  It says that it is playing music, but no sound is emmitted, nor am I able to change this.

    Why is it that my iPhone 4 suddenly lost the sound bar in music and YouTube?  I am able to make phone calls and hear everything just fine.  but otherwise my iPhone is silent.  It says that it is playing music, but no sound is emmitted, nor am I able to change this.

    Not knowing what steps were included in "all the troubleshooting possible with Apple people," I'll suggest you give the phone a chance to reprovision your cellular account.
    First turn off Wi-Fi. Then power off your phone. Hold the Sleep/Wake button until you see the power off slider. Then slide to power off. Turn the phone back on. After the phone starts watch to see if No Serive is displayed. Hopefully after 15-30 seconds that will change to the name of your cellular service provider and finally indicate LTE or 4G as well as include some dots indicating signal strength. You can then turn Wi-Fi back on.

  • My Iphone 5 headset is not working?Not able to hear sound (for eg:Music)

    My Iphone 5 headset is not working?Not able to hear sound (for eg:Music)

    Try disconnecting the headphones and then adjusting the volume, does it say headphones?
    There might be something in the headphone jack, maybe lint, dirt, or something else in there.
    Take a look at this Apple document for more information -> iPhone: Can't hear through the receiver or speakers

  • I have recently downloaded logic from the app store and it can't locate quite a few of the sounds in the music library.How can I solve this problem? Thanks

    I have recently downloaded logic from the app store and it can't locate quite a few of the sounds in the music library.How can I solve this problem? Thanks

    Can you download large files from other places apart from the App store, wondering if it is the App store or your internet connection.
    If it just the app store check this url http://www.apple.com/support/mac/app-store/contact/

  • HT201808 "...nor may they be repackaged in whole or in part as audio samples, sound effects or music beds." So does this mean I can't make a song with just remixed loops and publish it on SoundCloud for example?

    If I've made a song with remixed loops, can I post it on SoundCloud to share with facebook friends and stuff? Regarding this statement from the software license agreement: "...however, individual audio loops may not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, sound effects or music beds."

    momomikes,
    Would you mind continue reading the document you quoted?
    Read the last sentence, please. It goes:
    ”So don't worry, you can make commercial music with GarageBand, you just can't distribute the loops as loops.“
    https://support.apple.com/en-us/HT201808
    P

  • HT1349 No sound while playing music or in other programme but there is not problem to call

    No sound while playing music or in other programme but there is not problem to call

    Hello Koyirai
    If you are having issues with sound, check out the article below to troubleshoot the issue further with checking connections with any Bluetooth devices and checking the headset jack to ensure nothing is blocking access.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Regards,
    -Norm G.

Maybe you are looking for

  • Object Indicator field in Report painter

    we are looking for some field details in RWCOOM table like object indicator. There is object indicator field name in CCSS table. We want to ignore planned cost of service orders from the project planned cost as there is already planing of cost at pro

  • Print Multiple Page From Different Trays

    Dear Sir . / Mom   How are you ? Hope everything goes well with you !  I hope this massage will find you as soon as before happy and healthy for you and family . and every thing is OK . Tanks so much for your good support Please send your answer to m

  • ChaRM: transport route migration

    Hi! we have a lot of different transport routes with different transport layer and would like to implement ChaRM. We have a lot of different transport routes with different transport layer where we assign the developer classes/packages. Now we would

  • Java input xml data and xsl template -output file excel

    i need help or same special link on web. i must develop code or use a special tool that make this. INPUT: xml that contain real data xsl that explain a report template OUTPUT: file excel that show the template xsl with xml data source thank for help

  • Extending 'People' Information in Portal

    We need to add additional columns to the information found in the 'persons (wwv_persons)' table in the portal. What is the best way to do this (add an additional table and link the two)? We are trying to capture/write portlets to maintain user inform