Screed dies during reinstall of fw on n97mini

Hello everyone
I hope i can find someone here who can help me.
After getting my phone back from repairs (IT HAS BEEN THERE 5!!!!! TIMES IN 6 MONTHS) it again started to mess around on the first day trying to install something, and than telling me installer not working. so i thought a fullreset and reinstalling of fw would help. The problem is that during reinstall it tellsme that connectivity to device has been lost (ovi that is) and the screen of the phone dies slowly meaning it starts fading, than lines going through it than screen comming backon with nokia written on it. at that point the phone startd to charge again, but i can't switch it on. I need to remove the battery. phone starts againand is working again.
Does anyone know how to fixthis? Atthis point the repairshop had the phone more often than i do, everythinghas been replaced including twice the screen, memory card reader, keypad, mechanical componen (also twice whatever that means) and the logic board.
If there is anyone who has an answer i'd be very happy.
Kindregards
zero

During a FW install it is normal for the screen to go blank and the computer to say it is disconnected ! Just try to re-install firmware again. Make sure battery is fully charged , then connect and re-install firmware, do nothing to the phone untill the computer tells you to !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

Db assistant dies during installation of 8I on RH 6.0

Every time I have tried to install 8I, the db assistant dies during installation. It won't run from the command line either, in fact it has never run. The error is
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
I have 128 m of RAM and almost .5 gig of VM
What's going on and what's the fix.
Fred

You have the jdk and not the jre.
For more details, see: http://homepages.tig.com.au/~jmsalvo/linux/oracle8i.html
Oh, and you can create a db without using dbassist. Also listed in my help page.

HT1925 during reinstall I get an error message regarding itunes.msi file.

I have uninstalled itunes according to these instrutions, but during reinstall I still get an arror message regarding itunes.msi file. How do I fix this?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Mac Mini Intel Snow leopard often dies during sleep. What to do next?

During sleep the screen goes blank on a light grey color and I can only shut down using the power button. I am using an apple blue tooth keyboard and a logitech USB remote mouse. I have run Disk Repair w Utilities and also the MUG has tried Disk Warrior but problem persists. The Mac Mini is about 3 years old. It occasionally also crashes in Safari or Word. Please advise. Am worried about losing files, but so far so good.

I assume you have a current backup, so I would start by erasing the drive and reinstalling OS X.
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Upon completion quit DU and return to the installer. Install OS X. When completed you can restore your data from the backup.

WLS dies during stress testing

We're using JMeter to send continuous requests to the server. It creates
1500 threads and each requests Hello.jsp (see below) 500 times.
The server runs fine for about 6.5 minutes (serviced ~120000 requests)
before locking up. We let it sit for a while and about 4 minutes later, it
starts spewing out the following (bottom part of weblogic.log)
Fri May 19 10:48:37 GMT-04:00 2000: <WebLogicServer> WebLogic Server
started
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> *.jsp: init
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> *.jsp: param
verbose initialized to: true
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> *.jsp: param
packagePrefix initialized to: jsp_servlet
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> *.jsp: param
compileCommand initialized to: /opt/Solaris_JDK_1.2.2_05a/bin/javac
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> *.jsp: param
srcCompiler initialized to weblogic.jspc
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> *.jsp: param
superclass initialized to null
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> *.jsp: param
workingDir initialized to: /opt/ejbserver/weblogic/myserver/classfiles
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> *.jsp: param
pageCheckSeconds initialized to: 1
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> *.jsp:
initialization complete
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> Generated
java file:
/opt/ejbserver/weblogic/myserver/classfiles/jsp_servlet/testpages/hello.java
Fri May 19 10:51:10 GMT-04:00 2000:<W> <ListenThread> Connection rejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=15123,localport=7111]''
Fri May 19 10:51:10 GMT-04:00 2000:<W> <ListenThread> Connection rejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=15172,localport=7111]''
Fri May 19 10:51:10 GMT-04:00 2000:<W> <ListenThread> Connection rejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=11312,localport=7111]''
Fri May 19 10:51:20 GMT-04:00 2000:<W> <ListenThread> Connection rejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=14368,localport=7111]''
Fri May 19 10:51:20 GMT-04:00 2000:<W> <ListenThread> Connection rejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=14385,localport=7111]''
Fri May 19 10:51:24 GMT-04:00 2000:<W> <ListenThread> Connection rejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=15294,localport=7111]''
Fri May 19 10:51:27 GMT-04:00 2000:<W> <ListenThread> Connection rejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=15291,localport=7111]''
Fri May 19 10:51:55 GMT-04:00 2000:<W> <ListenThread> Connection rejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=28068,localport=7111]''
Fri May 19 10:51:56 GMT-04:00 2000:<W> <ListenThread> Connection rejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=28385,localport=7111]''
Fri May 19 10:52:00 GMT-04:00 2000:<W> <ListenThread> Connection rejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=28421,localport=7111]''
Fri May 19 10:53:45 GMT-04:00 2000:<W> <ListenThread> Connection rejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=63711,localport=7111]''
Fri May 19 10:53:45 GMT-04:00 2000:<W> <ListenThread> Connection rejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=63709,localport=7111]''
Fri May 19 10:58:26 GMT-04:00 2000:<E> <WebLogicServer> Exception invoking
weblogic.time.server.ScheduledTrigger@d2573f
java.lang.RuntimeException: <UTIL> UnsyncCircularQueue was full!
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.RuntimeException.<init>(Compiled Code)
at weblogic.utils.UnsyncCircularQueue.expandQueue(Compiled Code)
at weblogic.utils.UnsyncCircularQueue.put(Compiled Code)
at weblogic.kernel.ExecuteThreadManager.execute(Compiled Code)
at weblogic.kernel.Kernel.execute(Compiled Code)
at weblogic.time.common.internal.ScheduledTrigger.private_execute(Compiled
Code)
at weblogic.time.server.ScheduledTrigger.private_execute(Compiled Code)
at weblogic.time.common.internal.TimeTable.execute(Compiled Code)
at weblogic.time.common.internal.TimeEventGenerator.run(Compiled Code)
at java.lang.Thread.run(Thread.java:479)
We get a steady stream of this exact same RuntimeException for about 20
minutes before the whole thing dies.
Any ideas would be great!
Jason
The setup is the following:
Sun E250 with 1 CPU at 400MHz, 512 MB
Solaris 2.6
WLS 5.1 with SP3
Solaris Performance Pack is used
Sun JDK 1.2.2
min heap size is 128MB and max as 128MB with options
"-native -verbosegc"
other changed to the OS:
rlim_fd_max=4096
rlim_fd_cur=4096
tcp_close_wait_interval=10000
tcp_flush_fin_wait_2=10000
No paging/swapping takes place during the test.
Hello.jsp is as follows:
<html>
<head>
<title>A simple JSP file</title>
</head>
<body>
<%
out.print("Hello World!");
%>
</body>
</html>

Comments inline.
Cheers - Wei
Jason <[email protected]> wrote in message
news:[email protected]...
Thanks, that definitely sheds some light on the problem.
We monitored the server and came up with the following. The queue isindeed
growing and probably accounts for the eventual failure (does anyone know
what the limit is?). The throughput is constant but just can't keep upwith
the requests. Another thing is that the heap slowly increases along with
the queue and it took a while for it to hit 100% and have GC occur.I am not sure about the limit. Either 32K or 64K, I guess. If you monitor
your queue lenght frequently, you might have a chance to spot that limit.
Every request need memory to hold. So the heap slowly increases along with
the queue.
>
Now, we duplicated the test but accessed a Servlet directly instead of a
JSP. This servlet simply did some out.print(...) statements to displaythe
same page as Hello.jsp. This ran without a hitch. We had about 5 times
more throughput and the queue wasn't growing out of control. Also, theheap
would reach 100% much quicker and GC occured more frequently. I can't see
how handling a JSP request is that much more resource intensive than a
Servlet request...
We then tried the original test again (accessing JSP) but this timeremoved
Service pack 3. We were running straight WLS 5.1 (no service packs).
Everything behaved nicely (just like the Servlet test did). Could it then
be that SP3 introduced a bug relating to how JSP requests are handled?Well, if this was the case, you might need to address this with support.
>
Finally, all the tests ran without changing the default number of execute
threads (15). I don't think increasing the number will help seeing how
short-lived these requests are. I think more execute threads would just
increase the context-switching.I agree. I've seen 15 to 60 threads in production. Might be worth a try to
use larger number of threads in your test to see if it alleviated the
problem.
>
Thanks again,My pleasure.
Jason
Wei Guan <[email protected]> wrote in message
news:[email protected]...
WebLogic has its interal request queue to enqueue all requests. Therequest
refers to an unit of work for weblogic to process, such as a triggeredtime
service, http request, etc. The finite number of worker threads defined
in
your weblogic.properties file will dequeue the requests inside therequest
queue and process the work.
There is an upper limit on the size of this queue. The message you gotmeans
that your test hit that limit. In practice, if there were lots of
requests
inside that queue, every request need to wait for lots of time beforebeing
processed (the queue is FIFO I believed). Open your WebLogic Console and
monitor the size of the queue, in your test or in your production, if
you
see the size of the queue increases constantly, there is somethingwrong.
You might need to increase the number of threads to handle the load. If
tuning up the number of threads doesn't help, you might need useweblogic
clustering (or add more servers in your clustering) to share the load.
WebLogic engineers might be able to lift up the upper limit of the sizeof
the queue. However, the larger upper limit on the queue might not helpyou
in practice. Tuning your configuration and making sure the number of
requests inside the queue do not increase constantly might be a good
practice to follow.
My 2 cents.
Cheers - Wei
Jason <[email protected]> wrote in message
news:[email protected]...
We're using JMeter to send continuous requests to the server. It
creates
1500 threads and each requests Hello.jsp (see below) 500 times.
The server runs fine for about 6.5 minutes (serviced ~120000 requests)
before locking up. We let it sit for a while and about 4 minutes
later,
it
starts spewing out the following (bottom part of weblogic.log)
Fri May 19 10:48:37 GMT-04:00 2000: <WebLogicServer> WebLogic
Server
started
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> *.jsp:init
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> *.jsp:param
verbose initialized to: true
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> *.jsp:param
packagePrefix initialized to: jsp_servlet
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> *.jsp:param
compileCommand initialized to: /opt/Solaris_JDK_1.2.2_05a/bin/javac
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> *.jsp:param
srcCompiler initialized to weblogic.jspc
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> *.jsp:param
superclass initialized to null
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> *.jsp:param
workingDir initialized to: /opt/ejbserver/weblogic/myserver/classfiles
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> *.jsp:param
pageCheckSeconds initialized to: 1
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General> *.jsp:
initialization complete
Fri May 19 10:48:47 GMT-04:00 2000: <ServletContext-General>
Generated
java file:
/opt/ejbserver/weblogic/myserver/classfiles/jsp_servlet/testpages/hello.java
Fri May 19 10:51:10 GMT-04:00 2000:<W> <ListenThread> Connectionrejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=15123,localport=7111]''
Fri May 19 10:51:10 GMT-04:00 2000:<W> <ListenThread> Connectionrejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=15172,localport=7111]''
Fri May 19 10:51:10 GMT-04:00 2000:<W> <ListenThread> Connectionrejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=11312,localport=7111]''
Fri May 19 10:51:20 GMT-04:00 2000:<W> <ListenThread> Connectionrejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=14368,localport=7111]''
Fri May 19 10:51:20 GMT-04:00 2000:<W> <ListenThread> Connectionrejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=14385,localport=7111]''
Fri May 19 10:51:24 GMT-04:00 2000:<W> <ListenThread> Connectionrejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=15294,localport=7111]''
Fri May 19 10:51:27 GMT-04:00 2000:<W> <ListenThread> Connectionrejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=15291,localport=7111]''
Fri May 19 10:51:55 GMT-04:00 2000:<W> <ListenThread> Connectionrejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=28068,localport=7111]''
Fri May 19 10:51:56 GMT-04:00 2000:<W> <ListenThread> Connectionrejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=28385,localport=7111]''
Fri May 19 10:52:00 GMT-04:00 2000:<W> <ListenThread> Connectionrejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=28421,localport=7111]''
Fri May 19 10:53:45 GMT-04:00 2000:<W> <ListenThread> Connectionrejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=63711,localport=7111]''
Fri May 19 10:53:45 GMT-04:00 2000:<W> <ListenThread> Connectionrejected:
'Login timed out after: '5000' ms on socket:
'Socket[addr=47.187.230.161/47.187.230.161,port=63709,localport=7111]''
Fri May 19 10:58:26 GMT-04:00 2000:<E> <WebLogicServer> Exceptioninvoking
weblogic.time.server.ScheduledTrigger@d2573f
java.lang.RuntimeException: <UTIL> UnsyncCircularQueue was full!
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.RuntimeException.<init>(Compiled Code)
at weblogic.utils.UnsyncCircularQueue.expandQueue(Compiled Code)
at weblogic.utils.UnsyncCircularQueue.put(Compiled Code)
at weblogic.kernel.ExecuteThreadManager.execute(Compiled Code)
at weblogic.kernel.Kernel.execute(Compiled Code)
atweblogic.time.common.internal.ScheduledTrigger.private_execute(Compiled
Code)
at weblogic.time.server.ScheduledTrigger.private_execute(Compiled
Code)
at weblogic.time.common.internal.TimeTable.execute(Compiled Code)
at weblogic.time.common.internal.TimeEventGenerator.run(CompiledCode)
at java.lang.Thread.run(Thread.java:479)
We get a steady stream of this exact same RuntimeException for about20
minutes before the whole thing dies.
Any ideas would be great!
Jason
The setup is the following:
Sun E250 with 1 CPU at 400MHz, 512 MB
Solaris 2.6
WLS 5.1 with SP3
Solaris Performance Pack is used
Sun JDK 1.2.2
min heap size is 128MB and max as 128MB with options
"-native -verbosegc"
other changed to the OS:
rlim_fd_max=4096
rlim_fd_cur=4096
tcp_close_wait_interval=10000
tcp_flush_fin_wait_2=10000
No paging/swapping takes place during the test.
Hello.jsp is as follows:
<html>
<head>
<title>A simple JSP file</title>
</head>
<body>
<%
out.print("Hello World!");
%>
</body>
</html>

Laptop dies during sleep

My MacBook Pro usually could be returned back to life if the battery flattened out during sleep, with everything as it was; running applications and open documents.
Then recently I had to reinstall the system and ever since this function is absent. Now, if the battery gets flat during sleep, it leads to a certain death. Meaning that the machine has to be restarted and all applications that were running have lost what had not been saved. I have looked for a system dialog where this setting is operated, but no luck. Anybody got a tip?
Message was edited by: jonkiBoy

After a bit of research I have learned that the issue is "Safe Sleep". For some reason this default function is missing after reinstalling the system. There is nowhere mention (where I have looked) of how to turn this on or off. ??

HT201366 When I try to install this update on 10.6.8, it dies during the installation

During the install, just after it says "moving files into place with shove" it then goes into failed state and has a 'ok' button to continue & reboot.
The /var/log/system.log shows:
Jul 7 21:57:06: --- last message repeated 3 times ---
Jul 7 21:57:06 James-Lindemans-MacBook-Pro [0x0-0x1d01d].com.apple.SoftwareUpdate[404]: Input/output error
Jul 7 21:57:07 James-Lindemans-MacBook-Pro Software Update[404]: REQ: moving files into place with shove
Jul 7 21:57:07 James-Lindemans-MacBook-Pro Software Update[404]: REQ: install failed
Jul 7 21:57:07 James-Lindemans-MacBook-Pro Software Update[404]: SWU: installing "Security Update 2013-003, 1.0"
Jul 7 21:57:07 James-Lindemans-MacBook-Pro Software Update[404]: SWU: installing "iTunes, 11.0.4"
Jul 7 21:57:25 James-Lindemans-MacBook-Pro [0x0-0x1d01d].com.apple.SoftwareUpdate[404]: /: no supported helper partitions to update.
Jul 7 21:57:25 James-Lindemans-MacBook-Pro kextd[10]: updated kernel boot caches
Jul 7 21:57:25 James-Lindemans-MacBook-Pro Software Update[404]: kextcache returned 0
Jul 7 21:57:25 James-Lindemans-MacBook-Pro Software Update[404]: Running /sbin/reboot
I have Mac OS 10.6.8 installed.

Repair permissions, restart your computer, reinstall the update directly from Apple's download website instead of Software Update - Security Update 2013 - 003 ( Snow Leopard).
After the installation, repair permissions and restart your computer again.

Work process dies during an Upgrade in Shadow Instance

Hi all,
Systemconfiguration: Windows 2003 Server SP2 - Oracle 10.2.0.2
during the Upgrade PHASE SET "SETSYNC_EULCK_START_D1 after STARTSAP_IMP nothing more happends on the system. No errors in den SAPup.log etc.
The reason:
I can`t start the shadow Instance. During the start process in mmc the dispatcher + work process died...
Has anyone an Idea....there are som
Here is the dev_w0 logfile:
It might be great if anyone can help me!!!
The errors in a row:
1 - C SQL error 942: 'ORA-00942: table or view does not exist'
B ***LOG BZA=> table SVERS does not exist on database [dblink#5 @ 1299] [dblink 1299 ]
2 -
C *** ERROR => ORA-1403 when accessing table SAPUSER
[dbsloci.c 11535]
C OCI-call failed with -1=OCI_ERROR
C SQL error 942: 'ORA-00942: table or view does not exist'
3 -
B ***LOG BZA=> table SVERS does not exist on database [dblink#5 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10504
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Sat Jun 07 12:29:47 2008
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\put\exe\dboraslib.dll' ...
B Library 'E:\usr\sap\put\exe\dboraslib.dll' loaded
B Version of 'E:\usr\sap\put\exe\dboraslib.dll' is "700.08", patchlevel (0.152)
B New connection 0 created
M sysno 50
M sid CDP
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 155
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 3656
M
M kernel runs with dp version 235000(ext=110000) (@(#) DPLIB-INT-VERSION-235000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3656) [dpxxdisp.c 1312]
I
I Sat Jun 07 12:29:49 2008
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 12928 (1616)
M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010A80050, size: 6336352)
M DpShMCreate: allocated sys_adm at 0000000010A80050
M DpShMCreate: allocated wp_adm at 0000000010A82150
M DpShMCreate: allocated tm_adm_list at 0000000010A853D0
M DpShMCreate: allocated tm_adm at 0000000010A85430
M DpShMCreate: allocated wp_ca_adm at 0000000010FE92D0
M DpShMCreate: allocated appc_ca_adm at 0000000010FEF090
M DpShMCreate: allocated comm_adm at 0000000010FF0FD0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0000000011077C60
M DpShMCreate: allocated gw_adm at 0000000011077CE0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0000000011077D10
M DpShMCreate: allocated wall_adm at 0000000011077D20
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Sat Jun 07 12:29:50 2008
M ThInit: running on host drfeelgood
M
M Sat Jun 07 12:29:51 2008
M calling db_connect ...
C CLIENT_ORACLE_HOME is not set as environment variable or
C DIR_CLIENT_ORAHOME is not set as profile parameter.
C assuming using instant client with unspecified location.
C
C Sat Jun 07 12:29:53 2008
C Oracle Client Version: '10.2.0.1.0'
C
C Sat Jun 07 12:29:55 2008
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3SHD's password
C Connecting as /@CDP on connection 0 (nls_hdl 0) ... (dbsl 700 130308)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 00000000138A2020 000000000A91EC10 00000000138C59C8
C Attaching to DB Server CDP (con_hdl=0,svchp=00000000138C5888,srvhp=00000000138C7CB8)
C
C Sat Jun 07 12:30:20 2008
C Starting user session (con_hdl=0,svchp=00000000138C5888,srvhp=00000000138C7CB8,usrhp=000000000A91F428)
C
C Sat Jun 07 12:30:26 2008
C Now '/@CDP' is connected: con_hdl=0, nls_hdl=0, session_id=55.
C *** ERROR => ORA-1403 when accessing table SAPUSER
[dbsloci.c 11535]
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=00000000138C5888,usrhp=000000000A91F428)
C Now I'm disconnected from ORACLE
C Try to connect with default password
C Connecting as SAPSR3SHD/<pwd>@CDP on connection 0 (nls_hdl 0) ... (dbsl 700 130308)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 00000000138A2020 000000000A91EC10 00000000138C59C8
C Starting user session (con_hdl=0,svchp=00000000138C5888,srvhp=00000000138C7CB8,usrhp=000000000A91F428)
C
C Sat Jun 07 12:30:27 2008
C Now 'SAPSR3SHD/<pwd>@CDP' is connected: con_hdl=0, nls_hdl=0, session_id=52.
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance CDP is running on DRFEELGOOD with ORACLE version 10.2.0.2.0 since JUN 07, 2008, 00:35:17
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080607 122951 DRFEELGOOD
C build_stmt: reallocating stmt buffer: 256 -> 2000 characters
C
C Sat Jun 07 12:30:30 2008
C OCI-call failed with -1=OCI_ERROR
C SQL error 942: 'ORA-00942: table or view does not exist'
B ***LOG BZA=> table SVERS does not exist on database [dblink#5 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10504]
M
M Info for wp 0
M
M pid = 3656
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server drfeelgood_CDP_50 on host drfeelgood (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Sat Jun 07 12:30:30 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10724
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M
M Sat Jun 07 12:30:31 2008
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3656) [dpnttool.c 333]

Hi Markus,
thks for your advise. I already updated the Oracle Client to version 10.2.0.2.
The upgrade from CRM 5.0 to CRM 6.0 - 2007 is still running, but theres nothing happens in PHASE SETSYNC_EULCK_D1. This Phase comes after the EU_Imports 1-7.
In the log directory there ist also nothing the indicates about errors.
Here is the last SAPUp.log entries
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/2 patch level 24.103.
This is UNICODE SAPup!
Reading Parameter File "E:\usr\sap\put\bin\DBSYNC.PAR" at 20080607162600
Condition level 1, total => TRUE '#if ( "ORA" == "ORA" )' => TRUE
Reading Parameter File "E:\usr\sap\put\bin\R3CURENV.LST" at 20080607162600
...begin dialogue at 20080607162603
...end dialogue at 20080607162607
...STARTED at 20080607162607.
Reading Parameter File "E:\usr\sap\put\bin\TRATTR.LST" at 20080607162607
Reading Parameter File "E:\usr\sap\put\bin\TRGROUP.LST" at 20080607162607
Reading Parameter File "E:\usr\sap\put\bin\R3CURENV.LST" at 20080607162607
Reading Parameter File "E:\usr\sap\put\bin\DBSWTC.PAR" at 20080607162607
Condition level 1, total => FALSE '#if "ORACLE" == "SAPDB"' => FALSE
Condition level 1, total => FALSE '#elseif "ORACLE" == "DB2-z/OS"' => FALSE
Condition level 1, total => FALSE '#elseif "ORACLE" == "DB2/400"' => FALSE
Condition level 1, total => FALSE '#elseif "ORACLE" == "DB6"' => FALSE
Condition level 1, total => FALSE '#elseif "ORACLE" == "INFORMIX"' => FALSE
Condition level 1, total => FALSE '#elseif "ORACLE" == "MSSQL"' => FALSE
Condition level 1, total => TRUE '#elseif "ORACLE" == "ORACLE"' => TRUE
Condition level 1, total => FALSE '#if "Windows NT X86_64" ~= "Linux"' => FALSE
Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT INTEL"' => FALSE
Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT IA64"' => FALSE
Condition level 1, total => TRUE '#elseif "Windows NT X86_64" ~= "Windows NT X86_64"' => TRUE
...begin dialogue at 20080607162610
...end dialogue at 20080607162615
...begin dialogue at 20080607162615
...end dialogue at 20080607162637
UPGRADEPHASE SETSYNC_EULCK_START_D1
...started at 20080607162637
Setting syncpoint EU_LOCKED=STARTED in E:\usr\sap\put\mig\SYNC.DAT
At the usr sap put tmp directory, that shows the current activitiy of the upgrade, there also nothing happens.
if i have to start the shadow instance in the mmc manually at this time of the upgrade phase....at this time it doesnt work, but i dont find anything in the upgrade documentation.
Cheers Mario

Move library to save during reinstall

My son has an older ipod. He upgraded to whatever the itunes is now...7xx. The sync freezes.
The ipod itself has been reset, so there is nothing on it.
How do I move/save his library on his PC (and move it back again) so that I don't lose it when I uninstall 7 and reinstall 6?
Thanks!

My son has an older ipod. He upgraded to whatever the itunes is now...7xx. The sync freezes.
The ipod itself has been reset, so there is nothing on it.
How do I move/save his library on his PC (and move it back again) so that I don't lose it when I uninstall 7 and reinstall 6?
Thanks!

Macbook Pro frozen during reinstall of OS X 10.8 update

Hello,
My standard 13" Macbook Pro (2012) completed the OS X 10.8.5 update and upon rebooting it froze at the silver apple screen with the loading circle for awhile and finally booted up. I was skyping and it froze up and then I couldn't get it past the apple silver loading screen. I left it like this for a day and nothing changed. I then started in safe mode, tried to reinstall and it froze, I zapped the PRAM, ran disk utility repair, and tried to reinstall again and it got stuck saying it had 33 hours left. I left it up overnight and there was no change. I plugged in an ethernet cord and tried to reinstall the update and am down to 32 seconds left on the download, but I don't have high hopes. Anything else I can do before giving in and making a trek to the apple store?
Thanks

I've been trying to reinstall from safe or recovery mode. Whichever I get to by holding down Option. My computer won't get past the silver loading screen so unfortunately I can't get to a combo update. Below are the steps I completed for a SMC reset and again I got stuck at the silver loading screen.
Shut down the computer. Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected. On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. Release all the keys and the power button at the same time. Press the power button to turn on the computer

Error 1406/1402 during reinstall

I cannot figure out what is wrong with my iTunes. I am attempting a reinstall, but it will not let me. I have a 1406 error (HKEYLOCALMACHINE/software/classes/.cdda/openwithlist/Tunes.exe) and a 1402 error. I have tried everything I can, shut down spyware blockers, virus protection, stand alone Quick Time, but it will not work.
I am running Mozilla FireFox if that matters.

http://docs.info.apple.com/article.html?artnum=93865
Make sure to go through the steps in that article before trying anything else.

Battery dies during phone software update, L520 no...

Have an issue. I tried installing the next update on my L520 after the successful installation of the Amber update. During the installation of the update, my battery ran out and then i plugged it into the power source and now all i get is the spinning gears for the past 10 hours without anything to show any installation progress. How do i resolve this?I have tried to do the soft and hard reset but once the phone bootsup all i see is the same gears all over again
Attachments:
IMG-20140218-00032.jpg ‏577 KB

Hi, eyekay234.
Thank you for posting and welcome to the forum.
Sorry to hear about what had happened to your deivce. How did you perform the soft reset? Is it by pressing and holding both the volume down and the power button for 15 seconds? How about the hard reset? Did you do it this way:
Make sure your phone is powered off.
Press and hold the 'volume down' button.
Briefly press the 'power' button.
Keep the 'volume down' button held until you see an '!' on the screen.
When the '!' appears, press the following buttons in order:
'volume up'
'volume down'
'power'
'volume down'
Your phone will now be reset and will power back on slowly. Once powered back up, complete the set-up guide for your phone.
You can also let the battery completely drain and then connect the phone to the charger and wait until it boots up.
If those troubleshooting steps did not work, you can try to use the Nokia Software recovery tool. See:
http://www.nokia.com/us-en/support/software-recovery/
Please let us know how it will go.

Lost iWorks during Reinstall - Help

I am a new Mac user and it has not been easy. I have had a number of freezes and software compatibility issues with the new leopard OS. This reached a point where I was advised to do a reinstall of the Leopard OS and erase old files. I had not transferred any files over from my PC so this was agreeable. However, now that I have done this, I no longer have iWorks on my computer. I thought it would be on the OS CD but it was not. What do I do???

Apple has warned that archive and install and erase and install will not replace certain parts of Apple Software that would have been retained in Upgrade install of Leopard. They have a tech note out that says that if you do not do an Upgrade install but choose one of the others, that you will have to reinstall the Apple Software. If you bought iWork and payed for it, you may have a registration. If you payed for a registration of the iWork that was preinstalled as a 30 day demo, you should have received a registration notification.
Apple has the tech note that says that if one chooses archive and install or erase and install... that one will need to reinstall the purchased Apple Software. This includes iLife 08, iWorks 08, and some pro software. The Apple software installs to the system and those parts are not retained unless you do an Upgrade install of Leopard.
If you just began using a mac, you may not yet have exceeded the 30 day demo. The demo would have been included on your original OSX install dvds that came with your computer and you can reinstall it by going to the disc and selecting Install Bundled Software.
If you had not already paid for the iWork suite, simply go to the Apple Store and purchase the retail install. All that is included when you originally buy your mac is the demo, not the registration that takes it past the 30day trial.
Message was edited by: Rhyd

HELP! Mac Mini Server Journaling issue during reinstall

H E L P !
Mac Mini Server Journaling issue...
Hi there,
I have taken on a nearly new Mac Mini Server running Snow Leopard.
It has a RAID set up already.
When I try to reinstall the OS from the original disk the installation willl not let me select the drive as it says it is not journaled.
I have then opened Disk Utility and selected the main HD (there is one HD plus 2 Raid slices listed).
From this point on there are no options available:
The only 2 tabs above the right hand window are 'First Aid' and 'RAID'.
First Aid shows all 4 options greyed out.
Selecting the main HD and then going to File>Enable Journaling will not work as 'Enable Journaling' is greyed out.
Deleting the RAID does not work either, as the HD (mirrored RAID set) and both RAID sclices have the padlock icon next to them.
Can anyone help?
I really need to reinstall the OS and set the machine up with a TimeMachine Capsule asap!
Many thanks,
Haberdashery

Sorted!
All is good now : )

[SOLVED]Failed to lookup alias 'nvidia' (X server dies during startop)

Hello there everybody.
I recenly reinstalled Arch so that I could have a nice, clean install, and also because I though I was having trouble with the systemd migration. I think I was wrong there.
I successfully installed using the February 1st cd. Since that time, I have been unable to boot into a graphical system.
I have the current proprietary nvidia drivers installed - I tried with an older set with no change, and I tried the Nouveau drivers and got as far as a blinking cursor on TTY7 (but similar X server errors), so I abandoned that route (I want the proprietary drivers).
systemctl status kdm
returns
kdm.service - K Display Manager
Loaded: loaded (/usr/lib/systemd/system/kdm.service; enabled)
Active: active (running) since Sat 2013-03-23 08:42:09 EDT; 19 min ago
Main PID: 289 (kdm)
CGroup: name=systemd:/systemd/kdm.service
└─289 /usr/bin/kdm -nodaemon
Mar 23 08:42:10 awesomeDelicious kdm[289]: X server for display :0 cannot be started, session disabled
Following advice on another thread, I issued
echo 'nvidia' >> /etc/modules-load.d/nvidia.conf
but I don't think that helps at all, as
/lib/systemd/systemd-modules-load
returns
Failed to lookup alias 'nvidia': Function not implemented
so I am currently at a loss. I'd like to be able to get back into KDE as soon as I can, so any help is much appreciated!
Last edited by nikolardo (2013-03-25 23:31:28)

I assume you mean my Xorg.0.log (if not, correct me and direct me to xorg.log.0)
[ 5.091]
X.Org X Server 1.14.0
Release Date: 2013-03-05
[ 5.091] X Protocol Version 11, Revision 0
[ 5.091] Build Operating System: Linux 3.8.2-1-ARCH x86_64
[ 5.091] Current Operating System: Linux awesomeDelicious 3.7.6-1-ARCH #1 SMP PREEMPT Mon Feb 4 09:15:13 CET 2013 x86_64
[ 5.091] Kernel command line: root=/dev/sda3 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 5.091] Build Date: 09 March 2013 11:43:05AM
[ 5.091]
[ 5.091] Current version of pixman: 0.28.2
[ 5.091] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.091] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.091] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 23 10:05:25 2013
[ 5.147] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 5.159] (==) No Layout section. Using the first Screen section.
[ 5.159] (==) No screen section available. Using defaults.
[ 5.159] (**) |-->Screen "Default Screen Section" (0)
[ 5.159] (**) | |-->Monitor "<default monitor>"
[ 5.159] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.159] (==) Automatically adding devices
[ 5.159] (==) Automatically enabling devices
[ 5.159] (==) Automatically adding GPU devices
[ 5.199] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 5.199] Entry deleted from font path.
[ 5.215] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 5.215] Entry deleted from font path.
[ 5.215] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 5.216] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 5.216] Entry deleted from font path.
[ 5.216] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 5.216] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 5.216] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.216] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.216] (II) Loader magic: 0x7fdc20
[ 5.216] (II) Module ABI versions:
[ 5.216] X.Org ANSI C Emulation: 0.4
[ 5.216] X.Org Video Driver: 14.1
[ 5.216] X.Org XInput driver : 19.1
[ 5.216] X.Org Server Extension : 7.0
[ 5.218] (--) PCI:*(0:1:0:0) 10de:0cb1:1043:203c rev 162, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 5.234] Initializing built-in extension Generic Event Extension
[ 5.234] Initializing built-in extension SHAPE
[ 5.234] Initializing built-in extension MIT-SHM
[ 5.234] Initializing built-in extension XInputExtension
[ 5.234] Initializing built-in extension XTEST
[ 5.234] Initializing built-in extension BIG-REQUESTS
[ 5.234] Initializing built-in extension SYNC
[ 5.234] Initializing built-in extension XKEYBOARD
[ 5.234] Initializing built-in extension XC-MISC
[ 5.234] Initializing built-in extension SECURITY
[ 5.234] Initializing built-in extension XINERAMA
[ 5.234] Initializing built-in extension XFIXES
[ 5.234] Initializing built-in extension RENDER
[ 5.234] Initializing built-in extension RANDR
[ 5.234] Initializing built-in extension COMPOSITE
[ 5.234] Initializing built-in extension DAMAGE
[ 5.234] Initializing built-in extension MIT-SCREEN-SAVER
[ 5.234] Initializing built-in extension DOUBLE-BUFFER
[ 5.234] Initializing built-in extension RECORD
[ 5.234] Initializing built-in extension DPMS
[ 5.234] Initializing built-in extension X-Resource
[ 5.234] Initializing built-in extension XVideo
[ 5.234] Initializing built-in extension XVideo-MotionCompensation
[ 5.234] Initializing built-in extension XFree86-VidModeExtension
[ 5.234] Initializing built-in extension XFree86-DGA
[ 5.234] Initializing built-in extension XFree86-DRI
[ 5.234] Initializing built-in extension DRI2
[ 5.234] (II) LoadModule: "glx"
[ 5.401] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.924] (II) Module glx: vendor="NVIDIA Corporation"
[ 5.924] compiled for 4.0.2, module version = 1.0.0
[ 5.924] Module class: X.Org Server Extension
[ 5.924] (II) NVIDIA GLX Module 313.26 Wed Feb 27 13:10:40 PST 2013
[ 5.932] Loading extension GLX
[ 5.932] (==) Matched nouveau as autoconfigured driver 0
[ 5.932] (==) Matched nvidia as autoconfigured driver 1
[ 5.932] (==) Matched nv as autoconfigured driver 2
[ 5.932] (==) Matched vesa as autoconfigured driver 3
[ 5.932] (==) Matched modesetting as autoconfigured driver 4
[ 5.932] (==) Matched fbdev as autoconfigured driver 5
[ 5.932] (==) Assigned the driver to the xf86ConfigLayout
[ 5.932] (II) LoadModule: "nouveau"
[ 5.932] (WW) Warning, couldn't open module nouveau
[ 5.932] (II) UnloadModule: "nouveau"
[ 5.932] (II) Unloading nouveau
[ 5.932] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 5.932] (II) LoadModule: "nvidia"
[ 5.932] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 5.995] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 5.995] compiled for 4.0.2, module version = 1.0.0
[ 5.995] Module class: X.Org Video Driver
[ 5.995] (WW) NVIDIA: This server has an unsupported input driver ABI version (have 19.1, need < 19.0). The driver will continue to load, but may behave strangely.
[ 6.021] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 6.021] (EE) NVIDIA: system's kernel log for additional error messages.
[ 6.021] (II) UnloadModule: "nvidia"
[ 6.021] (II) Unloading nvidia
[ 6.021] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 6.021] (II) LoadModule: "nv"
[ 6.021] (WW) Warning, couldn't open module nv
[ 6.021] (II) UnloadModule: "nv"
[ 6.021] (II) Unloading nv
[ 6.021] (EE) Failed to load module "nv" (module does not exist, 0)
[ 6.021] (II) LoadModule: "vesa"
[ 6.021] (WW) Warning, couldn't open module vesa
[ 6.021] (II) UnloadModule: "vesa"
[ 6.021] (II) Unloading vesa
[ 6.021] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 6.021] (II) LoadModule: "modesetting"
[ 6.021] (WW) Warning, couldn't open module modesetting
[ 6.021] (II) UnloadModule: "modesetting"
[ 6.021] (II) Unloading modesetting
[ 6.021] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 6.021] (II) LoadModule: "fbdev"
[ 6.022] (WW) Warning, couldn't open module fbdev
[ 6.022] (II) UnloadModule: "fbdev"
[ 6.022] (II) Unloading fbdev
[ 6.022] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 6.022] (EE) No drivers available.
[ 6.022]
Fatal server error:
[ 6.022] no screens found
[ 6.022] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 6.022] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 6.022] (EE)
...so I seem to have a problem with ABI version?
A quick search shows that some people have fixed this with an ignoreABI option somewhere, is this advisable, and how would I accomplish it?
Anyway yes further advice please!

Screed dies during reinstall of fw on n97mini

Similar Messages

Maybe you are looking for