Screem Variant required for VA01 T Code

Dear friends,
One of my key user required an additional feature in Sales Order Creation: the requirements are:
Screen Varient for VA01 and XD01 -- to save the input data and minimise the effort of the User on keying in the values.
If any one is having idea please let me know.
Prakash

Hello Prakash,
Check this for step by step procedure:
How can I customize the delivery screen layout?
or
http://searchsap.techtarget.com/tip/0,289483,sid21gci1213076,00.html_
Assign points, if helpful.
Rgds,
Raghu.

Similar Messages

SHD0 transaction - Set Variant Group for VA01

Hi Guru,
please can you help us fixing Variant Group for VA01 transaction, only for specific user?
We created a standard variant in SHD0 for VA01 tansaction and we assigned this variant to specific user group.
Problem is that for these users in the group, standard variant is not imported into Sales Order (no screen settings are imported).
If we assign the same Standard Variant into Order Type it works perfectly.
Can you help us using this variant also for specific user (Variant Group)?
Thank you very much
Kind Regards
Andrea

Please do you have any news?
Thank you very much
Kind Regards
Andrea

Which of the following is required for multiple Company Codes assigned to s

Which of the following is required for multiple Company Codes assigned to same Company ?
Same Chart of Accounts
Same Currency
Same Fiscal Year

hi,
if multiple companies are dependent on each other then you have to follow the below as same for all companies.
Same CoA
Same ItemMaster Data
Same WareHouses
Same BP Master Data
Same Currency
same fiscal year
and few more master datas which ever necessary.
if they are independant on each other then no need to maintain the same codes.
regards,
varma

Steps Required for Deleting Un - Used Company codes

Hi
My client Requirement is Un - Used Company codes need to remove from Production Environment.
What is the Steps Require for Remove Company codes.
Regards,
TML

Follow This T.Codes:
OBR1
OBR2
OKKS
OKC3
KL14
0KE5
0KE1
0KE2
KCH2
KS14
KSH3
KA24
KAH2
OKKP
EC03
EC02
EC04
EC01
Regards,
Viswa

Different Bank charges GL account for two company codes with same COA

Hi,
While configuring OBXK ( Automatic GL account for bank charges) , I see there is provision to enter only one GL account per chart of accounts.
We have two company codes using same chart of accounts but different bank charges GL account. Please tell me how to configure this.
Thanks,
suresh

Hi,
Thanks Krishnan and Chandra.
I agree with you it could be the same GL account for bank charges, but the business requirement is such that in one of the two company codes, bank charges are required to be tracked separately to be subsequently transferred to the other company code. This means two separate GL accounts are required for two company codes which needs to be configured in OBXK.
Hope this clarifies my query further.
thanks,
suresh

Enhancement for 6201 screen in SAPLV69A for VA01 transaction

hi experts,
i need to enhance the 6201 screen in SAPLV69A program for VA01 application,
is there any user exit for this particular screen.

Hi,
Check all for VA01
Transaction Code - VA01                     Create Sales Order
Exit Name           Description
SDTRM001            Reschedule schedule lines without a new ATP check
V45A0001            Determine alternative materials for product selection
V45A0002            Predefine sold-to party in sales document
V45A0003            Collector for customer function modulpool MV45A
V45A0004            Copy packing proposal
V45E0001            Update the purchase order from the sales order
V45E0002            Data transfer in procurement elements (PRreq., assembly)
V45L0001            SD component supplier processing (customer enhancements)
V45P0001            SD customer function for cross-company code sales
V45S0001            Update sales document from configuration
V45S0003            MRP-relevance for incomplete configuration
V45S0004            Effectivity type in sales order
V45W0001            SD Service Management: Forward Contract Data to Item
V46H0001            SD Customer functions for resource-related billing
V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
No of Exits:         15
Rewards if useful.............
Minal

Transaction Variant for VA01

Hi All,
I am able to create transaction variant for transaction code MM01, XD01 and XK01 successfully. But i am unable to create transaction variant for VA01.
And also some times i am getting error message "SAP Object SCV1(short text of variant) cannot be assigned to package ZXXX". Can you pls let me know why i am getting this error and why i am unable to create transaction variant for VA01 successfully.
Thanks,
Raju

Hi,
There is no difference in creation of the transaction variant for VA01/02. But the way it works is different. It works at order type level instead of t-code level. You have to create the variant in SHD0 and assign the same in order type customization.
Alternatively you can populate the field TVAK-VARIANT with the transaction variant name in MV45AFZZ subroutine USEREXIT_MOVE_FIELDS_TO_VBAK/USEREXIT_FIELD-MODIFY. With out this it wont work. Just try to change the TVAK-VARIANT value in debug mode and see if it works fine. Surpricingly it works fine if you individually execute the variant.
The error you mentioned might be because you might have given one of the screen variant name not starting with Z or Y.
Thanks,
Vinod.

Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code

I get this message when I check the Device manager for my Ipod
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipod

I reinstalled Itunes a couple of times. I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems. I have a yellow causion lite when I look at the USB-port with the phone connected. All other devices work without a problem.

Business requirement Questioneer/checklist for New Company Code Creation

Experts,
Can anyone provide Business requirement Questioneer/ Checklist or say all the factors to be considered for New Company Code Creation from user's point of view.
this questioneer we will send to User department to specify all the requirements and add if required.
Eg; Fiscal year definition, Posting period, Doc. types, etc.
Please provide full list to be considered before we go ahead.
- Nilesh

Dear Vivek,
Actually I need the factors to be considered while defining Co. Code settings.
All such factors which will guide us (SAP Team) how to design parameters in the Co. Code.
We will send this questioneer to User Department to fill up and on that basis we will conclude our design Parameters.
Please help.
- Nilesh

Installer LV7.1 - LabVIEW load error code 21: An external subroutine required for execution could not be found.

Bonjour,
Je cherche à créer un installer portatif utilisant les drivers NI-DAQmx 8.7.1 et NI-CAN 2.6.0.
Je dispose d'un code LV 7.1 et j'ai installé l'application builder 7.1.
Mais une fois l'application installé sur un PC vierge de Labview, j'obtiens le message suivant:
load error code 21: An external subroutine required for execution could not be found.
Ce message est répété plusieurs fois (pour différents VIs) puis le programme ne se lance pas.
J'ai bien veillé à installer les drivers NI-CAN et NI-DAQmx correspondant au préalable sur la machine cible.
En chercant sur le forum, plusieurs pistes m'ont été proposé:
La version NI-DAQ
L'intégration du Run time Engine
Un problème de DLL
J'ai vérifié ces 3 points mais cela n'a pas règlé mon problème.
Résolu !
Accéder à la solution.

Bonjour,
Merci de ta réponse.
En fait, j'ai bien inclu le runtime engine de Labview qui était effectivement la source de l'erreur.
L'installation de NI-DAQmx v 8.7.1 provoque la mise à jour de la version du runtime engine (passage de 7.1 à 7.1.1).
J'ai donc désinstallé Le runtime engine 7.1.1 (ce qui a provoqué la désinstallation de labview et NI-DAQ).
Puis je suis passé par une version plus ancienne de NI-DAQ (7.2) que j'ai adapté (inclusions de DLL et de VIs).
Les messages d'erreurs ont alors tout simplement disparus!

Code for va01 bdc table control

hi
i want to CODE FOR bdc table control VA01 (TCODE)
ASAP

Awadhesh,
just refer:
Problem in the BDC Table Control for the T.Code VA01
BDC Uploading from flat file to VA01.
BDC For Line Items In Sales Order
dont forget reward.
Amit.

REG copy of transaction variant for VA01

Hi,
I need to copy transaction variant for VA01
After copying transaction variant
i tried to copy screen varaiants for 4440 its working fine but for screen 4480 the fields which are to be invisible is not working
i tried to use same screen variants still not working
please suggest if any customization needs to be done.
thanks ,
kamalakar

Hi,
I guess you don't have assign the transaction variant in TVAK.
Instead you could have created the z tcode by using the option "transaction with variant(variant transaction)" and given the transaction variant.
Thanks
Naren

Where can I find the coupon code required for registration?

Where can I find the coupon code required for registration? I purchased the design standard at Officeworks in Australia and given the box a thorough check, but unless there is a number not labelled 'coupon code', it's definitely not there. I am using this product personally and not for business so I have no IT dept to assist.

Find a serial number
For anything else contact support directly or work things out with your reseller.
Mylenium

HT5622 Where do I find the code required for the registration of accounts in I store?

Where do I find code required for registration of account on Istore

What code are you referring to ? When creating an account there is an optional field for entering an iTunes gift card code - is that what you mean ? If you do then that field can be left blank, and as iTunes gift cards aren't available in all countries (and they are country-specific) then you might not be able to fill it anyway.

User Exit for VA01 and VA02 transaction codes

Hi,
I am writing a userexit for PO number checking for VA01 and VA02 transaction codes.The PO number should be unique in the table (vbkd-bstkd).Duplicate PO number entries can be checked with Sold-to Party.If anybody written something like this....please advice me...
Thanks in advance.
fractal

Hi Fractel,
Why are you looking for a user exit to do this duplicate PO check?
This can be achieved through configuration of your sales order document type and message control. Follow the path below for configuration of the document type.
Implementation Guide for R/3 Customizing (IMG)
-->Sales and Distribution
   -->Sales
      -->Sales Documents
         -->Sales Document Header
            -->Define Sales Document Types
Once you execute this node, you will see all the available document types. Select the one you are interested in and click the details icon. In the subsequent screen, under "General Control" section, there is a field "Check purch.order no". Pick the value 'A' from the drop-down list.
Once you do this, system will check for duplicate PO numbers whenever you are creating or changing the sales order with that document type. If duplicate, it issues a message.

Screem Variant required for VA01 T Code

Similar Messages

Maybe you are looking for