Screen 0000 Does not exist

Hello,
I have a short dump cause the the error "Screen 0000 Does not exist".
When I click on the Identification tab in txn BP for most BP roles I do not get this error.
However when I select this tab for the role on Bill-to Party (CRM004) I get this short dump.
I have checked BUS5 and when I highlight the screen BUP060 and click simulation I can see a screen $00000. I am not sure if this is the problem becasue all other roles access this BDT config. and don't have the error.
Can anyone suggest any other avenues I can try to resolve this problem?
Thank you
David

Thanks Smita,
I have reset to SAP standard in our test system, which has sorted out this problem.
Those whole config. thing of VCT and field groupings seems abit 'flaky' and doesn't inspire me with confidence.
Is there a rule to creating transports for this type of work because I seem to be transporting data and two fields of the same are appearing in one client but not in the config. client?
Regards
David

Similar Messages

In MVT 545 Check table XEKPO: entry 00000 0000   does not exist

Hello
While using the mvt type 545 with MB1C (Included in mvt)
I am getting the following error what could be the possible reason
Check table XEKPO: entry 00000 0000   does not exist
    Message no. M7001
Diagnosis
    In table XEKPO the entry 00000 0000   is missing.
Regards
Niti Narayan Chaturvedi

This is a authomatic mvt, But I am using a manual route to excecute, is this causing problem
Where is the check for the automatic mvt
Niti Narayan

'Screen does not exist' error after transported to Quality server.

I have a report program which is working fine in development server. It is transported to quality server and when executed it throws dump. There is a CALL SCREEN statement in the program and the dump shows screen 1001 does not exists. I checked the program on quality server and when i double clicked on the screen number, it tells screen 1001 does not exist and do you want to create??. I rechecked the program in Development server and confirmed everything is active and have been catched in the transport request. When I checked with the basis guy, he said there was a component conflict error with the request while transporting and he overrided it.
Please tel me what should I do to solve this issue. Its very urgent. Please help.
Thanks
Johan

Hi
You seem to have run into some trouble with transports. Did someone perhaps develop this report in the QA server?
I would suggest this:
In SE80. display your report. Then in the hierarchy on the left, right click on your report and select 'write transport entry' . This option will ask you to create a new transport for your report and all objects inside it. Take that transport to the QA server. It should include the entire report, including screens.
If you have trouble importing into the QA server, please provide the transport logs here.

*Program "SAPMV45A" tried to use screen 0000. The screen does not exist*.

Dear Experts,
I have copied a program SAPMV45A (VA01) to ZSAPMV45A and created the transaction ZVA01.
I have maitained the transaction ZVA01 in V_T180 of SM30 by copying VA01.
after doing all, when I execute the transaction ZVA01 it will go to the initial screen of create Sales Order after enter the header information like Order Type, Sales Org, Distribution Channel & Division if click Enter it will go to short dump where I am getting the information as shown below
Program "SAPMV45A" tried to use screen 0000.
The screen does not exist.
If any one have an idea please let me know the solution to rectify this problem.
Thank You,
Best Regards
Venkatesh

Hi
in transaction VFBS we have....
Function Codes                            T185F
Paths between Process. locations T185
Processing Locations                    T185V
Dialogs                                         T185D
Development Support                     T185E
Tab Control                                   TAXITABS
To maintain the Screen Sequence is it enough to fill Dialogs T185D or do I need to fill all all...?
if so can I maintain the same info for ZSAPMV45A as which is there for the standard profram SAPMV45A ?
Regards
Venkatesh

Field VIQMSM-MATXT(14) does not exist in the screen SAPLIQS0 7204

Hi experts,
I have a BDC calls QM02 Tcode in a custom report as follow:
PERFORM bdc_dynpro      USING 'SAPLIQS0' '7204'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=REAK'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'VIQMEL-QMNUM'.
CLEAR txline.
CONCATENATE 'VIQMSM-MATXT(' lnindex ')' INTO txline.
" txline = VIQMSM-MATXT(0014)
CONCATENATE 'PO #: ' alv_qmel-ponum INTO matxt SEPARATED BY space.
PERFORM bdc_field       USING txline
                                  matxt.
PERFORM bdc_transaction USING 'QM02'.
When debugging I found that the input bdcdata table contains a field VIQMSM-MATXT(14) in screen SAPLIQS0 7204.
Number 14 is the number of task of the notification which was not marked as deleted.
This field caused the error: Field VIQMSM-MATXT(14) does not exist in the screen SAPLIQS0 7204 after that.
I would like to know what does VIQMSM-MATXT(14) mean? How BDC can transfer VIQMSM-MATXT(14) to QM02? And How does it work?
Thanks,
Khanh

Hi Kostek,
I did not have the solution for this exact problem because our FA canceled this bug.
Check your test case carefully whether the screen of the TCode called by BDC has that field OR NOT. If that screen does not have that field in your special case, just ignore it.
Regards,
Khanh

The specified screen does not exist in the DLIB file

Dear Experts,
I have copied the program of VA01 to Zprogram and created ztransaction when I execute ztransaction it will goto first screen, after I type input and click enter I will get below message
Screen zsapmv45a 4470 does not exist
when I check help (F1) it says as follows
Diagnosis
     The specified screen does not exist in the DLIB file.
Procedure
     Specify the programm and the screen number correctly.
     If you want to generate a list of existing screens, select the program
     and screen number on the Screen Painter selection screen. In the case of
     the screen number, you can only enter a * in the first position.
can anyone tell me that how to maintian screen in DLIB file?
Thanks in Advance...
Venkatesh

Do you have such a screen number under the function group where you have copied the transaction VA01?
If not chek in standard func group for this screen and copy it.

Field BSEG-SKFBT does not exist in the screen SAPMF05A 0302

Hi
while posting parked documents using FBV0 i am getting following error.
Field BSEG-SKFBT does not exist in the screen SAPMF05A 0302
What can be the solution to above error.
regards
Rajesh

To eliminate this problem please use transactions OB14, OB41 and set for posting key and G/L account
field status for field BSEG-SKFBT 'Optional entry':
transaction OB14 AND OB41 -> Select group 'Payment transactions' -> 'Payment terms' -> set 'Optional'.
I think the SAP note 1073234 could correct this issue.
Thanks,
Daniel

Field BSEG-HKTID does not exist in the additional data Screen

Hi
We are facing a problem while posting the parked document. Field BSEG-HKTID does not exist in the screen SAPLF040 0331.
As we want to avoid entering the field-data at the time of payment proposal run using T.code F110, we prefer to enter at the time of posting a parked document or at the time of parking.
We had checked the field status (of Posting key and GL) and its not available.
We refered note 953374 House bank details: Account ID in the document. It asks to activate the RE-FX component. However, we are not in the real estate business hence not logical to do so. How do we need to proceed?
PP

To do the same change with the transaccion FB02 y FB03, create an enhancemente point in the program: SAPMF05L dynpro: 1301, module: DYNPRO_MODIFIKATION, at the of perform open_fi_dynpro_mod and write:
LOOP AT SCREEN.
IF sy-tcode = 'FB02'.
    IF screen-name = 'BSEG-HKTID'.
      screen-input = 1.
      screen-invisible = 0.
      screen-active = 1.
      screen-output = 1.
      screen-group4 = ' '.
      MODIFY SCREEN.
      EXIT.
    ENDIF.
elseif sy-tcode = 'FB03'.
      IF screen-name = 'BSEG-HKTID'.
      screen-input = 0.
      screen-invisible = 0.
      screen-active = 1.
      screen-output = 1.
      screen-group4 = ' '.
      MODIFY SCREEN.
      EXIT.
    ENDIF.
endif.
ENDLOOP.
and, all ready.

Dynpro does not exist in FI-CA(different type of screen enhancement)

Hello guys,
My scenario is that i need to extend account posting screen in FI-CA for IS-MEDIA in ECC 6.0.my requirement is that i need to add tab strip which on clicking should display two fields .in one of the field if we press f4 it should diplay possible values and there text so user can select appropriate value and in another field user should enter text manually.
More intresting in this enhancement is i need to write code in 3 function modules
FKK_DOCT_SAMPLE_INI_OP AND ,FKK_DOCT_SAMPLE_PBO_OP,FKK_DOCT_SAMPLE_PAI_OP and save these function modules along with subscreen number created in screen painter in a table TFKO21C,then screen will be automatically enhanced using those function modules and sub screen.
now problem is i have done all those things .my additional tab strip getting displayed but when i click on the tab strip iam getting error as dynpro does not exists.if any body gone through this process or having any idea please give me suggestion.
Regards
jana

the problem for this question is solved

User Exit PO MM06E005 - Screen does not exist

Hello All,
I created a new object for user exit 'EXIT_SAPMM06E_012' in Development System. This user exit is under the enhancement MM06E005. The user exit EXIT_SAPMM06E_012 will be used to produce an error message when saving a PO.
After Transported the Project into Quality System and I tried running transaction ME22->Select one line Item record in table control -> (Menu) ITEM -> Confirmations -> Overview to confirm the PO. I have been getting a dump telling me that SAPLXM06 Screen 0111 Screen does not exist." This is because the screen exit was also included in the activation.
When I have deactivated the Project its working fine. This problem occurs only the activation of user exit.
Thanks & Regards
Sudheer

hi,
the problem when activating the exit you would have checked or activated the screen which currently is there in the development system , or you would have activated the screens and put them in a different request or in $tmp so when the request having the exit got transaported the screen code or activation was not taken along.
Deactivate the exit and then deactivate the screens also.
and then try to activate and put all in one request : deactivated and activations.
Narayani
Message was edited by:
Narayani

Field RF05A-NEWBK. does not exist in the screen SAPMF05A 0100

Hi,
We are doing the intercompany account payable postings through SAP EDI. The process following as below -
Delivery -> Intercompany Billing -> Account Receivable
--> IDOC -> Account Payable
While doing the EDI posting for AP, system giving the following message -
Field RF05A-NEWBK. does not exist in the screen SAPMF05A 0100
Best Regards
Goutham

Hello,
I am facing the Same issue for Inbound Idoc for Invoice.
I checked in debug mode as well and in BDC call we get a sucess message as
Field RF05A-NEWBK. does not exist in the screen SAPMF05A 0100
which beocme as error for Inbound IDOC.
Coundt get the field newbk on the screen for Invcoice . in which segment do we pass the value for this.
Can anyone please give more inputs on this.
Thanks
Ritesh Solanki

Field BSEG-HKTID. does not exist in the screen SAPMF05A 0332

Dear ALL,
Our client is ECC 6.0
we are facing a problem while posting the park document
Field BSEG-HKTID. does not exist in the screen SAPMF05A 0332
   Message no. 00349
Diagnosis
   The specified field does not exist on the screen.
Procedure
   Check your batch input data.
The above problem occurs only after the Patch level upgradation only.
SAP suggest refer your sap note 953374 House bank details : account id in the document.
It says activate the RE-FX component.
Any how we are not in the real estate business.
Please provide me your suggestion to resolve the problem.
Thanks for your cooperation
Regards,
laxminarayan

To do the same change with the transaccion FB02 y FB03, create an enhancemente point in the program: SAPMF05L dynpro: 1301, module: DYNPRO_MODIFIKATION, at the of perform open_fi_dynpro_mod and write:
LOOP AT SCREEN.
IF sy-tcode = 'FB02'.
    IF screen-name = 'BSEG-HKTID'.
      screen-input = 1.
      screen-invisible = 0.
      screen-active = 1.
      screen-output = 1.
      screen-group4 = ' '.
      MODIFY SCREEN.
      EXIT.
    ENDIF.
elseif sy-tcode = 'FB03'.
      IF screen-name = 'BSEG-HKTID'.
      screen-input = 0.
      screen-invisible = 0.
      screen-active = 1.
      screen-output = 1.
      screen-group4 = ' '.
      MODIFY SCREEN.
      EXIT.
    ENDIF.
endif.
ENDLOOP.
and, all ready.

Field BSEG-DMBTR. does not exist in the screen SAPMF05A 0302

Hi Gurus,
I am facing an error when uploading document in background through SM35(batch session)
1. 1. If i try to post the document in the forground system gives same message but on pressing enter it goes to next line item and ultimately posts the document. But if i try to post (SM35 session) in the back ground i am facing the issue"Field BSEG-DMBTR. does not exist in the screen SAPMF05A 0302" Message no. 00349
2. The system is ECC 6.0 recently upgraded from 4.7
It would be great if any expert can help to resolve this issue.
Thanks
Anand

Seems that your screen flow does not factor in the transaction currency. BSEG-DMBTR is only available for input when the transaction currency is different from the company code currency.
Your program creating the BDC session needs rework, or better use SAP standard tools for document posting (e.g. RFBIBL00 or one of the BAPIs available )
Thomas

Field BSEG-MEINS. does not exist in the screen SAPMF05A 0300

Dear Expert,
in cross-company sales process, issuing an IDoc to create a FI AP document, the IDoc was created and issued successfully by inter-compnay invoice, but in processing the IDoc to creat a FI AP document, there is a error message and that is "Field BSEG-MEINS. does not exist in the screen SAPMF05A 0300". i used the Units of Measurement"EA", and in the setting of Units of Measurement"EA" i already flagged the Units of Measurement"EA" as Primay code, but the error still appear again, please give me some useful advice!

Hi
Concerning message of "Fields BSEG-MEINS and MENGE are hidden in
SAPMF05A 0300", it was recommended to check which G/L accounts were
involved and to verify that fields BSEG-MEINS and MENGE were set to
'optional' .Please check the field statuses in OB41/OB14 for the
affected G/L accounts, whether the field as optional is set.
regards,
Ramana

Field BSEG-SKFBT. does not exist in the screen

Hi,
While doing FBV0 the document is not posting and it is showing the error message as below.
Field BSEG-SKFBT. does not exist in the screen SAPMF05A 0302
Message no. 00349
Diagnosis
The specified field does not exist on the screen.
Procedure
Check your batch input data.
govind.

Govind,
The filed BSEG-SKFBT (Discount base), is not available in the screeen SAPMF05A 0302.
This happens between Development, Quality and Productions cients. The sequence of fields differs with
respective to client.
In Development while recording (SHDB) field BSEG-SKFBT might have appeared on screen SAPMF05A 0301 but in Production or quality it might appear on some other screens
Ask Abaper to check this, as this might be available in SAPMF05A 0301 or SAPMF05A 0303 .
Hope this helps.
Regards
Velu Mudaliar

Screen 0000 Does not exist

Similar Messages

Maybe you are looking for