Screen accurate problem while using iphone 6 (IOS 8.0.2)

Hi All
I recently got an iphone6 (not 6 plus). it was awesome till 3 days ago.
I got in trouble for screen accuracy while typing or gaming.
some areas in side and corner of screen is not that much accurate. for example while typing, I have problem for pressing bottoms, A,Q and L,M and back space. I mean these bottoms on keyboard is not working like other bottoms. some times I have to press them 2 or 3 for typing.
also same area which these bottoms located has same accurate problem while gaming.
is there any body to help me for solving this issue? or any other guy has same problem?

Hi littletiger2989,
Thanks for visiting Apple Support Communities.
It sounds like you are sometimes not able to connect or stay connected to Wi-Fi networks.
You can find some additional troubleshooting steps to help resolve this situation at this link:
iOS: Troubleshooting Wi-Fi networks and connections
All the best,
Jeremy

Similar Messages

Disappearing Emails while using iPhone 5 IOS 7.0.4

On several ocassions already I have opened an email with iPhone Mail and while reading the email accidentally disappears and cannot be found or recovered either in the iPhone or in the main Gmail database. I could not find the email by searching, Sender, Subject, All Mail, Deleted Messages, Spam or Trash Folders. The last email I was reading was important and it disappeared to oblivion while using the iPhone, a very, very frustrating problem.
In the past I had a similar situation two-three times but later I was able to find the email in Deleted Message folder or in the back of a string of email with a particular Sender. Now iPhone just disappears the message completely. Unreliable using iPhone unless one insures that your PC or Mac Book already has the email downloaded before attempting to use iPhone to read the email content. It does not happen all the time just periodically and also makes me wonder if the email was Recalled by Sender and whether an email once received, opened and read it can the deleted by Sender!?????

Sometimes when i reject a coming call then i try unlocking screen , swiping to the right is not working only draging notification center and contol center works but i cannot click on any toggle only click home button to close both, in order to fix the problem i have to reboot the iphone or answer a coming call .

Problem with InDesign CC redrawing the screen too slow while using Zoom tool

Hello. I got a problem with InDesign CC redrawing the screen too slow while using Zoom tool. Sometimes it takes more than a secong to zoom in or out. However InDesign CS6, Photoshop CC, Illustrator CC works just fine. What could be the problem, videocard or something else? Below is my PC configuration: OS Windows 8 Pro (x64); processor Intel Core i7 2600k CPU 3,40GHz; video adapter NVIDIA GeForse GTS 450; monitor NEC PA271W (2560x1440).

Yes it’s a bug. The trick is to select the tool and then left click the photo information strip and hold for a few seconds until you see the windows bar at the top of the screen (not responding)
The lasso tool should then work normally.

Cyberoam problem while using wifi on iPhone 5

cyberoam problem while using wifi on iPhone 5

yes I have a problem. big problem which is causing an itch in my nose. I M a college student and i use wifi of my college for internet surfing and downloading from my iphone 5. for That I got to first login into cyberoam. I do so and start browsing. but the problem is,the cyberoam login page pops up every minute asking to login. it causes problem while I keep anything for downloading. it's the cause only with my iPhone 5. I use my windows pc without any problem. what is the sloution for this. I hope the question is quite clear to you.

Hey ! I have a problem with my iphone 5s IOS 8 , my notification center does not scan when the screen is locked

hey !
I have a problem with my iphone 5s IOS 8 , my notification center does not scan when the screen is locked

sounds like a hardware failure. Return the phone to Apple.

How to turn off screen autorotation ?? I am using iphone 4s, ios 7.1.1 !

I dont want my phone's screen to rotate while using browser or whatts app...someone please help me out how to stop autorotation...

Swipe up from the bottom of your screen to reveal the Control Center, far right is orientation lock, tap on/off.

I used iphone 3gs iOS 6.1.6 why i can't open an application camera 360 ultimate

I used iphone 3gs iOS 6.1.6 why i can't open an application camera 360 in my iphone

Hello Kunmon,
The following article provides some useful troubleshooting that can help get your iPhone's camera working correctly.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

TS1843 i am using iphone 4 ios 6.1.3, after hotmail imap setup, error showing "CANNOT GET MAIL" tHE CONNECTION TO THE SERVER FAILED. its happening since 14 aug. plz help !

i am using iphone 4 ios 6.1.3, after hotmail imap setup, error showing "CANNOT GET MAIL" tHE CONNECTION TO THE SERVER FAILED. its happening since 14 aug. plz help !

I have trouble with sending e-mail and syncing e-mail. Try changing to 1 day sync under settings. It's sluggish but it works for me until they resolve the issue. MS claims all is normal. If you still have a problem you should report it here: https://status.live.com/report/hotmail

Volume problem while using headphone

when I use my headphone I have no problem while talking on phone but when I try to listen to music or watch you tube I cannot hear the left side. I restored iphone and got replacement but same problem. I changed headphones but that wasent the problem as well. please help!

s. laxnars wrote:
I am facing some problem while using preparedStatement.setNull while using Bea's Orale XA Driver, the same code works fine with oracle XA driver,
Can any one plz help on this.
Here the code
String insertIntoTestRequestQuery = "Insert into A values(?,?,?)";
PreparedStatement dbInsertStatement = connection.prepareStatement(insertIntoTestRequestQuery);
dbInsertStatement.setLong(1, 3L);
dbInsertStatement.setString(2,"test");
dbInsertStatement.setNull(3,java.sql.Types.NULL);
I am using Weblogic 9.2 with Oracle 9i
here the Spy Log
spy>> PreparedStatement[163].setNull(int parameterIndex, int sqlType)
spy>> parameterIndex = 1
spy>> sqlType = 0
spy>> java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver. ErrorCode=0 SQLState=HY004
java.sql.SQLException: [BEA][Oracle JDBC Driver]The specified SQL type is not supported by this driver.
     at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
     at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.validateSqlType(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.setObjectInternal(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.setNull(Unknown Source)
     at weblogic.jdbcx.base.BasePreparedStatementWrapper.setNull(Unknown Source)
     at weblogic.jdbcspy.SpyPreparedStatement.setNull(Unknown Source)
     at weblogic.jdbc.wrapper.PreparedStatement.setNull(PreparedStatement.java:491)Hi. This is a known issue. Call official BEA support and open a case
so you will be notified when a new driver will have the fix. In the
meantime, if you set the Type to correspond to the DBMS's column type,
it will work. In fact, I'll bet that if you just set the Type to VARCHAR
it will work, regardless of the actual column type...
Joe

HT1386 Please contact itunes support to complete this transaction how i can solve this problem on my iphone 4s IOS 5.1.1

Please contact itunes support to complete this transaction how i can solve this problem on my iphone 4s IOS 5.1.1

Do as directed & contact iTunes support:
http://www.apple.com/support/itunes/

I am having problem while using ms word with anjal( OS X Lion 10.7.5 (11G63))

i am having problem while using ms word with anjal is not working properly but its working in facebook and other areas.i need and its very important to using tamil fonts for my job.can anyone help me out from this problem.
thanking you
by
moses

Those who are knowledgable in this area (myself not among them) say that Word's support for Asian languages is faulty. The best word processor for that use is "Mellel."

My screen reduces brightness while using apple tv, any suggestions?

My screen reduces brightness while using my apple tv - any suggestions?

Does it just look darker all the time or does the brightness change over time?
If it just looks darker, check Settings>Video and if set to RGB Low try RGB High or YCrCb.
I was watching a digital copy of final Harry Potter last night that came bundled with the Blu Ray - could not believe how dark the film was - I used to routinely use RGB Low on AppleTV1, and such settings options have only just appeared on AppleTV2. I could see hardly any shadow detail on RGB Low, much improved on RGB High.
AC

HT5781 screen turns white while using macbook

screen turns white while using my macbook

Does the situation change by changing the position of the screen?
Which model, year, size and OS are you running?

Problem while using trigger from line of 6534

I have faced some problems while using triggering with 6534. They are listed below. Please provide solution me.
1. ) i was using pattern input with triggering(buffered) in which i am using the example given in library buffered pattern input-triggered.vi
Now i am using port 0 to take input. From line 0 of port 2 i want to generate a pulse which can trigger the operation & start acquisition. For that i am using write to single line.vi . My DPULL is open so bydefault the line will be at low level & by vi i will make it high which will trigger the operation.
In normal condition if we use write to a single line.vi it will write the given status on that line within a fraction of second and abort execution. But when i am usin
g it for trigger in following manner, it did not work.
First i started the VI buffered pattern input-triggered.vi.I have configured the start trigger with leading edge trigger. I have set the time limit properly.Synchronous operation is set at the front panel of vi.
Now if start the write to a single line.vi to give start trigger, nether it triggered the operation,nor it abort execution of single line write vi.When time out occured in triggered vi, then both vis stopped simultaneously. Why this happened?
2.) Similar problem i faced when i wanted to perform the change detection.vi Port 0 is configured for input.Line 1 to 7 are fixed with some status by connecting them to Vcc or GND. I have connected port 0 line 0 with port 2 line 0. So when i change status of line 0 of port 2 change detection should be occured o port 0. i am changing the status of line 0 of port 2 by write to a single line.vi But here i faced same problem as first that it was not writing to port 0 line 0. And bo
th process stopped when time limit occured in change detection vi.
So what can be the problem? Please help me.

Hi Vishal,
1) You should check to see that when you are writting a static 1 to line 0 you see a pulse high. You should also make sure that you wire this line to the STARTTRIG for group 0.
2) If you solve question 1 you will also have question 2 solved.
It might be helpful to create a program that configures both programs (pattern I/O on port 0 and static I/O on port 2) in the same program and then starts both groups. I would do a little testing to see exactly what signals you do or do not see.
Ron

Problem while using receive after invoke activity

Hi,i have got a problem while using a receive activity,after a invoke activity.The invoke acivity seems that does not work and also the debugger runs forever....But if i remove the receive activity,the invoke activity works fine.
<h2>The output of GlassfishV2 is:<h2>
This is from the exception block.
com.sun.bpel.model.meta.impl.RInvokeImpl@f590c6={<?xml version="1.0" encoding="utf-8" ?>
*<invoke name="Invoke1"*
partnerLink="PartnerLink2"
portType="tns:test_service3"
operation="luizao"
inputVariable="LuizaoIn"
outputVariable="LuizaoOut"
xmlns:tns="http://dim.test.org/"></invoke>}
*[Fatal Error] :1:1: Content is not allowed in prolog.*
System exception occured while executing a business process instance.
java.lang.NullPointerException: WSDL message model is null
at com.sun.jbi.engine.bpel.core.bpel.debug.WSDLMessageImpl.<init>(WSDLMessageImpl.java:56)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.CallFrame.onFault(CallFrame.java:380)
at com.sun.jbi.engine.bpel.core.bpel.model.runtime.impl.SyntheticThrowUnitImpl.doAction(SyntheticThrowUnitImpl.java:91)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELInterpreter.execute(BPELInterpreter.java:145)
at com.sun.jbi.engine.bpel.core.bpel.engine.BusinessProcessInstanceThread.execute(BusinessProcessInstanceThread.java:76)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELProcessManagerImpl.process(BPELProcessManagerImpl.java:818)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.EngineImpl.process(EngineImpl.java:261)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.EngineImpl.process(EngineImpl.java:742)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.processRequest(BPELSEInOutThread.java:401)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.processMsgEx(BPELSEInOutThread.java:240)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.run(BPELSEInOutThread.java:158)
This is from the exception block.
I think correlation sets are ok(i have two receive activities).
I use Netbeans6.0 IDE.
Can anyone help me?
Sorry,but i don't speak English fluently

I can't debug it more,because the bpel variables window disappears when the proccess comes to invoke activity.
The bpel code is simple:I have got a sequence with follow activities:
receive
assign
invoke
receive
assign
reply
The code is:
<?xml version="1.0" encoding="UTF-8"?>
<process
    name="Testfile2"
    targetNamespace="http://enterprise.netbeans.org/bpel/Test2/Testfile2"
    xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:tns="http://enterprise.netbeans.org/bpel/Test2/Testfile2" xmlns:ns0="http://xml.netbeans.org/schema/Testfile2" xmlns:ns1="http://j2ee.netbeans.org/wsdl/Testfile2">
   <import namespace="http://j2ee.netbeans.org/wsdl/Testfile2" location="Testfile2.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <import namespace="http://enterprise.netbeans.org/bpel/test_service3Wrapper" location="Partners/test_service3/test_service3Wrapper.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <import namespace="http://dim.test.org/" location="Partners/test_service3/test_service3.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <import namespace="http://enterprise.netbeans.org/bpel/test_service2Wrapper" location="Partners/test_service2/test_service2Wrapper.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <import namespace="http://dim.test.org/" location="Partners/test_service2/test_service2.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
   <partnerLinks>
      <partnerLink name="PartnerLink3" xmlns:tns="http://enterprise.netbeans.org/bpel/test_service2Wrapper" partnerLinkType="tns:test_service2LinkType" myRole="test_service2Role"/>
      <partnerLink name="PartnerLink2" xmlns:tns="http://enterprise.netbeans.org/bpel/test_service3Wrapper" partnerLinkType="tns:test_service3LinkType" partnerRole="test_service3Role"/>
      <partnerLink name="PartnerLink1" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" partnerLinkType="tns:Testfile21" myRole="Testfile2PortTypeRole"/>
   </partnerLinks>
   <variables>
      <variable name="Testfile2OperationOut" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" messageType="tns:Testfile2OperationReply"/>
      <variable name="Operation1In" xmlns:tns="http://dim.test.org/" messageType="tns:operation1"/>
      <variable name="LuizaoOut" xmlns:tns="http://dim.test.org/" messageType="tns:luizaoResponse"/>
      <variable name="LuizaoIn" xmlns:tns="http://dim.test.org/" messageType="tns:luizao"/>
      <variable name="Testfile2OperationIn" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" messageType="tns:Testfile2OperationRequest"/>
   </variables>
   <correlationSets>
      <correlationSet name="CorrelationSet1" properties="ns1:My_Property"/>
   </correlationSets>
   <sequence>
      <receive name="Receive1" createInstance="yes" partnerLink="PartnerLink1" operation="Testfile2Operation" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" portType="tns:Testfile2PortType" variable="Testfile2OperationIn">
         <correlations>
            <correlation set="CorrelationSet1" initiate="yes"/>
         </correlations>
      </receive>
      <assign name="Assign1">
         <copy>
            <from>$Testfile2OperationIn.part1/ns0:ena</from>
            <to>$LuizaoIn.parameters/ena</to>
         </copy>
         <copy>
            <from>$Testfile2OperationIn.part1/ns0:id</from>
            <to>$LuizaoIn.parameters/id</to>
         </copy>
      </assign>
      <invoke name="Invoke1" partnerLink="PartnerLink2" operation="luizao" xmlns:tns="http://dim.test.org/" portType="tns:test_service3" inputVariable="LuizaoIn" outputVariable="LuizaoOut"/>
      <receive name="Receive2" createInstance="no" partnerLink="PartnerLink3" operation="operation1" xmlns:tns="http://dim.test.org/" portType="tns:test_service2" variable="Operation1In">
         <correlations>
            <correlation set="CorrelationSet1" initiate="no"/>
         </correlations>
      </receive>
      <assign name="Assign2">
         <copy>
            <from>$Operation1In.parameters/hik</from>
            <to>$Testfile2OperationOut.part1/ns0:hik</to>
         </copy>
      </assign>
      <reply name="Reply1" partnerLink="PartnerLink1" operation="Testfile2Operation" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" portType="tns:Testfile2PortType" variable="Testfile2OperationOut"/>
   </sequence>
</process>If it's a bug,that means that i can't use second receive after invoke any more?

Screen accurate problem while using iphone 6 (IOS 8.0.2)

Similar Messages

Maybe you are looking for